Search

A chiral method using capillary electrophoresis was developed for the separation of the four stereoisomers of a new chiral substance currently undergoing drug development as single enantiomer. After the selection of highly sulfated β-CD as chiral selector, an exhaustive study on the influence of several experimental variables on the resolution was performed, being the substitution degree of the CD a very decisive factor. Run time and resolutions were about 20min and higher than 2.0, respectively. The method was validated in terms of selectivity, linearity, accuracy, precision, and limits of detection and quantitation according to the requirements of the International Conference on Harmonisation for the determination of the chiral purity of a drug substance. The usefulness of the method was demonstrated in the control of stereoisomeric impurities in raw material as well as in the determination of the chiral stability of the drug in the solid state and in dosage forms used in safety assessment. Finally, the chiral method was used to investigate the possible in vivo inversion in biological samples., (Copyright © 2016 Elsevier B.V. All rights reserved.)

The enantiomeric separation of four chiral polycyclic musks (Galaxolide, Tonalide, Traseolide and Phantolide) using CE was achieved for the first time in this work. Two chiral methodologies were developed by CD-MEKC using SDS as surfactant in a CHES buffer (pH 9.0). One methodology enabled the fast enantiomeric separation of individual polycyclic musks with analysis times lower than 10min for Tonalide, 13min for Traseolide and Phantolide, and 17min for Galaxolide. Enantiomeric resolutions obtained were higher than 1.5 using different separation media for each compound. A second methodology was also developed enabling the simultaneous enantioseparation of the four musks. In this case, the use of a dual CD system containing two neutral CDs was necessary to achieve the separation of all enantiomers from three out of four musks in 45min. Although a coelution between Galaxolide and Phantolide was observed, the use of different UV absorption wavelengths allowed the simultaneous analysis of both musks. In addition, a sweeping strategy was performed in order to increase the sensitivity of the method. Appropriate analytical characteristics (linearity, LOD and LOQ, precision and absence of matrix interferences) were obtained for conventional and sweeping methodologies. Finally, the usefulness of the method was demonstrated in the determination of the enantiomers of the polycyclic musks in personal care products as perfumes., (Copyright 2009 Elsevier B.V. All rights reserved.)

An EKC method for the determination of ornithine (Orn) enantiomers has been developed after a fast pre-capillary derivatization with FITC. The derivatization step was needed to provide a chemical moiety to the Orn molecule, enabling a sensitive UV detection and the interaction with the CDs used as chiral selectors. To accelerate the derivatization reaction, an ultrasound probe was used. For the development of the chiral method, the influence of different experimental conditions (type and concentration of the chiral selector, temperature, and separation voltage) was investigated. Due to the anionic nature of the analyte (FITC-Orn), five neutral CDs were employed as chiral selectors. The native gamma-CD showed the highest chiral separation power, observing that a low concentration of this CD (1 mM), using a working temperature of 25 degrees C and a separation voltage of 20 kV, enabled to obtain the highest enantioresolution for Orn and its separation from other amino acids usually present in food supplements. After optimizing the method for the preconditioning of the capillary, the analytical characteristics of the chiral method were established. Linearity, LOD and LOQ, precision, and accuracy were evaluated previously to the determination of Orn enantiomers contained in ten commercial food supplements. No interferences from other amino acids present in these samples were observed.

A fast in-capillary derivatization method by CE with 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate was developed for the first time for the determination of amino acid enantiomers (arginine, lysine, and ornithine) in dietary supplements and wines. Because of the initial current problems due to the formation of precipitates into the capillary during the derivatization reaction, a washing step with an organic solvent as DMSO between injections was necessary. Different approaches were also investigated to enhance the sensitivity of detection. A derivatization procedure, where plugs of ACN, derivatizing agent (10 mM 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate), and sample in borate (1:1 v/v) were injected in tandem (2, 3, and 6 s, respectively, at 50 mbar), was selected because it enabled to obtain the most sensitive and reproducible results. Appropriate analytical characteristics (linearity, LOD and LOQ, precision, absence of matrix interferences, and accuracy) were obtained for this method. Finally, the optimized method was successfully applied to the determination of the enantiomers of arginine, lysine, and ornithine in food samples of different complexities (dietary supplements and wines).

A new analytical methodology was developed by EKC enabling the fast enantiomeric separation of Ornithine in complex mixtures of amino acids. A previous derivatization step with 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate (AQC) was achieved to enable the sensitive UV detection of amino acids as well as to make possible their interaction with the CDs employed as chiral selectors. A dual CD system containing an anionic and a neutral CD in phosphate buffer at acid pH showed a high resolving power allowing the enantiomeric separation of 18 protein amino acids and Orn. The method was applied to the analysis of fermented foods to investigate the extent of the presence of Orn enantiomers.