Search

Objectives: This study aimed to conduct a systematic review with network meta-analysis (NMA) to answer whether the following of a white diet is necessary during dental bleaching and if there is any coloring food that would impact more significantly the bleaching efficacy., Data Sources: The review followed the PRISMA Extension Statement for network meta-analysis. Six electronic databases (PubMed, Scopus, Web of Science, Embase, LILACS, and SciELO) were systematically searched from the beginning of documentation to April 15, 2024, and the gray literature was also assessed using the Google Scholar platform., Study Selection: The eligibility criteria considered clinical trials comparing the bleaching efficacy of treatment using peroxide agents in participants that followed a white diet (i.e., a diet with restriction of coloring food and beverages; control group) and those who had either a supplemented intake of pigments or an unrestricted diet (intervention group). The risk of bias was assessed using RoB2 (for randomized clinical trials/RCT) and ROBINS-I (for non-randomized clinical trials/NRCT) tools, and the quality of evidence was checked using the GRADE tool. The color change data of groups were compared using both standard pairwise meta-analysis (SPMA) and Bayesian NMA., Results: The search resulted in 1051 studies, of which seven were included in the review. Four studies had RCT design, whereas the other three studies were NRCTs. Different bleaching regimens and peroxide agents were investigated, and all studies evaluated the color change obtained before (baseline) and after bleaching treatment using a digital spectrophotometer (Vita Easyshade) according to the CIELab color system. All seven studies were classified as having low risk of bias. Concerning the SPMA, there was no difference between the intervention and control groups regardless of the bleaching technique (p=0.15), the type of peroxide and concentration of the gel (p=0.38), and the period of bleaching treatment (p=0.20). Regarding the NMA, the white diet group showed similar color change values than the groups that received pigment supplementation with grape juice, coffee, tea, wine, cola, or an unrestricted diet (p>0.05). According to the probabilistic analysis, the unrestricted diet group ranked better than the other groups at the first and second weeks of treatment, and at the third week of treatment, all groups performed similarly in terms of bleaching efficacy, except for the group supplemented with coffee, which ranked worst. The GRADE analysis revealed a moderate quality of evidence for the RCT and NRCT studies included in the review., Conclusions: The consumption of cola-based soft drink, coffee, black tea, grape juice, and red wine, as well as the following of a totally unrestricted diet, do not have a significant influence on the effectiveness of bleaching as compared to a white diet regimen during the course of the treatment., Clinical Significance: The accumulated evidence indicates that restricting the intake of dietary pigments during dental bleaching treatment is not essential. When comparing the effects of various staining beverages on the efficacy of dental bleaching, no significant differences were observed in the color change obtained whether coloring food/beverages were restricted or not to the participants., Registration: The protocol for this systematic review was registered at Open Science Framework, having the following registration DOI: https://doi.org/10.17605/OSF.IO/3DV24., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Objectives: To conduct a systematic review and network meta-analysis (NMA) to answer whether endocrown restorations have similar mechanical behavior than other traditional core-crown systems with or without intracanal posts for the rehabilitation of anterior endodontically treated teeth., Methods: The review followed the PRISMA Extension Statement for NMA. Studies were identified by a systematic search to select reports on endocrown restorations in anterior teeth. A search was performed in PubMed (MEDLINE), Scopus, Web of Science, Embase, SciELO, and LILACS databases. Articles evaluating mechanical performance through in vitro and finite element analysis (FEA) studies were selected and the risk of bias was assessed using the RoBDEMAT and ROBFEAD tools, respectively. The data were analyzed qualitatively and quantitatively through NMA using the MetaInsight tool., Results: Eleven articles were included (eight in vitro and three with FEA design). Six in vitro studies were evaluated using NMA. Composite resin endocrowns showed greater load-to-fracture and lower occurrence of catastrophic failures than traditional restorations. Combining glass fiber post with composite restoration also showed good strength behavior. Regarding FEA studies, two out of three studies showed a more homogeneous distribution of stress for the endocrown group., Significance: Endocrowns performed similarly to or better than conventional restorative strategies, with composite resin being the most recommended material of choice. The rehabilitation of endodontically treated anterior teeth with extensive coronal destruction is typically challenging for the dentist, and there is still no consensus in the literature that provides conclusive answers for choosing the appropriate material and restorative strategy. Exploring new techniques and materials that make this procedure easier for the dentist and guarantee good results is paramount., Competing Interests: Conflict of interest The authors declare no competing interests., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Objective:  The focus of this triple-blind randomized study was to evaluate the biocompatibility of a new root canal filling sealer (RCFS) based on tristrontium aluminate and dodecacalcium hepta-aluminate in living tissue., Material and Methods:  Forty-five Wistar rats ( Rattus norvegicus ) were divided into three groups: control (polyethylene), sealer (Bio-C Sealer, Londrina, PR, Brazil), and experimental (tristrontium aluminate and dodecacalcium hepta-aluminate). The tissues were analyzed under an optical microscope to assess different cellular events at different time intervals (7, 15, and 30 days)., Statistical Analysis:  Data were analyzed using the Kruskal-Wallis and Dunn ( p  < 0.05) tests., Results:  In the initial period, a moderate inflammatory infiltrate was observed, similar between the endodontic cements groups ( p  = 0.725). The intensity of the infiltrate decreased with time, with no significant difference among the groups ( p  > 0.05). The number of young fibroblasts was elevated in all groups evaluated at 7 days. The experimental group showed the highest number of cells at all time intervals, but the difference with the sealer group at 7 ( p  = 0.001) and 15 days ( p  = 0.002) and the control group at 30 days was not significant ( p  = 0.001). Regarding tissue repair events, the amount of collagen fibers increased over the experimental intervals, with no significant difference between the sealer and control groups ( p  > 0.05)., Conclusion:  The experimental RCFS based on calcium and strontium aluminates proved to be biocompatible for use in close contact with periapical tissue, inducing a low inflammatory reaction and favoring rapid tissue repair., Competing Interests: None declared., (The Author(s). This is an open access article published by Thieme under the terms of the Creative Commons Attribution License, permitting unrestricted use, distribution, and reproduction so long as the original work is properly cited. (https://creativecommons.org/licenses/by/4.0/).)

Objectives: To compare the performance of Cention-N® with direct restorative materials used at the daily practice (e.g., resin-based composites/RBC, glass ionomer cements/GIC, bioactive resins, silver amalgam) via a systematic review study., Methods: The review followed the PRISMA-NMA recommendations, and the protocol of the review was published at osf.io/ybde8. The search was conducted in PubMed/MEDLINE, Scopus, Web of Science, Embase, Lilacs, and SciELO databases, as well as in the grey literature (Open Grey, Proquest, and Periódicos CAPES). Studies with an in vitro experimental design evaluating the characteristics and properties of Cention-N in comparison to other restorative materials were included. The risk of bias of included studies was assessed using the RoBDEMAT tool, and meta-analyses were conducted using Review Manager 5.4 and MetaInsight V3 tools., Results: A total of 85 studies were included in the review, from which 79 were meta-analyzed. Several characteristics of direct restorative materials were analyzed, including physical (color change, degree of conversion, hardness, microleakage, polymerization rate, roughness, water solubility, water sorption), mechanical (bond strength to dentin, compressive strength, diametral tensile strength, flexural modulus, flexural strength, load-to-fracture, wear), and biological (alkalinizing effect, antibacterial activity, calcium and fluoride release) properties., Significance: Cention-N presented similar physico-mechanical properties compared to RBCs, but a stronger behavior than GICs. Despite the Alkasite nature of Cention-N, GICs may still demonstrate the greatest fluoride releasing ability from all direct restorative materials. This review confirmed the adequate behavior of Cention-N when compared to several other more traditionally used materials, confirming its applicability for the permanent restoration of decayed or fractured teeth., (Copyright © 2024 Elsevier Inc. All rights reserved.)

This study investigated the impact of 'storage condition' and 'period of storage' on selected physico-mechanical properties and fracture reliability of a resin-based composite (RBC). Specimens, prepared from a nanofilled RBC (Filtek Z350 XT; 3M ESPE), underwent tests for degree of conversion (DC), flexural strength (σ), flexural modulus (E), and hardness. The specimens were initially grouped into dry storage at 37°C or wet storage in distilled water at 37°C. Subsequently, they were further divided into four subgroups based on the period of storage: 6, 24, 72, or 168 hours. Specimens tested immediately after preparation served as control. Data analysis employed two-way ANOVA and Weibull analysis (α = 5%). Compared to the control, an increase in DC was observed only after 72 hours of dry storage; σ showed higher values after both dry and wet storage, regardless of the storage period (except for the group wet-stored for 168 hours); E increased with dry storage for at least 24 hours or wet storage for 72 hours; and hardness increased after dry storage for at least 24 hours or wet storage for up to 72 hours. The Weibull modulus remained unchanged under any of the distinct storage conditions. Dry storage resulted in greater characteristic strength than the control, whereas wet storage contributed to higher strength values only at shorter periods (up to 24 hours). Overall, the inherent properties of RBCs with a similar composition to that tested in this study may change with varying storage conditions and periods.

Background: This systematic review aimed to investigate whether vital pulp therapy and root canal treatment (RCT) promote different postoperative pain., Studies Reviewed: The authors searched PubMed, Cochrane Library, Embase, and Latin American and Caribbean Health Sciences Literature databases for studies published through June 30, 2022. The authors included randomized clinical trials if they reported on the assessment of postoperative pain after direct pulp capping, partial pulpotomy, pulpotomy, or single-visit RCT. The authors assessed the frequency of no, mild, moderate, and severe postoperative pain. They conducted meta-analyses to compare postoperative pain after full pulpotomy (PULP) and RCT., Results: The qualitative synthesis included 57 studies, and the authors conducted meta-analysis of 3. PULP leads to more asymptomatic cases (relative risk [RR], 1.06; 95% CI, 1.01 to 1.11; P < .01; I 2  = 67%) and to a lower occurrence of mild (RR, 0.89; 95% CI, 0.79 to 0.99; P < .04; I 2  = 37%) and moderate (RR, 0.70; 95% CI, 0.51 to 0.95; P < .02; I 2  = 57%) postoperative pain than RCT. The frequency of severe pain was very low for both vital pulp therapy and RCT. Moderate to severe postoperative pain was more common at 48 hours through 72 hours after RCT and up to 36 hours after PULP. Pain intensity after PULP was higher using calcium-enriched material compared with using mineral trioxide aggregate at 12, 18, and 36 hours (P < .001)., Practical Implications: PULP showed a significantly higher incidence of no pain and a lower incidence of mild and moderate pain than single-visit RCT. Clinical decisions for RCT or PULP should not be based on differences in postoperative pain. When analgesia is indicated, it probably should be limited to a short time after PULP., Competing Interests: Disclosures None of the authors reported any disclosures., (Copyright © 2024 American Dental Association. Published by Elsevier Inc. All rights reserved.)

Objectives: To evaluate whether the restorative material in direct contact with the dentin influences pulp vitality in primary and permanent teeth with deep carious lesions restored after selective caries removal (SCR)., Material and Methods: Systematic searches of databases MEDLINE via PubMed, Scopus and ISI Web of Science were performed for primary and permanent teeth. Inclusion criteria were applied for title and abstract reading of databases search results. After full texts review of included studies, those that did not meet exclusion criteria were excluded from meta-analysis., Results: For meta-analysis, 2 studies were included for permanent teeth and 6 for primary teeth. The failure events reported were meta-analyzed using two statistical methods: standard pairwise meta-analysis (SPMA) and network meta-analysis (NMA). The SPMA identified similar failure occurrence of restorations performed with calcium hydroxide (CH) and other liner materials (RR 0.84, 95% CI 0.41, 1.74; p = 0.64), no significant difference between the use of alternative liners or CH regardless deciduous or permanent teeth (RR 0.79, 95% CI 0.36, 1.71; p = 0.55) and similar risk of failing at different follow-ups for all liner materials tested (RR 0.77, 95% CI 0.35, 1.70; p = 0.52). Probabilistic analysis indicated GIC as liner material with the highest probability of clinical success (SUCRA = 72.76%), and CH ranked as the worst liner material (SUCRA = 21.81%)., Conclusion: Pulpal vitality was not affected by material used as liner after selective caries removal in deep carious cavities., Clinical Relevance: Current clinical evidence supports the weak recommendation to not use calcium hydroxide as liner after SCR., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Objectives: The aim was to compare the porosity of different bulk-fill resin-based composites (RBCs) placement techniques to the conventional incremental technique using microcomputed tomography (μ-CT)., Material and Methods: Occlusal cavities were prepared on extracted human molars, divided into five groups based on the placement technique (n = 10/group). Techniques examined were Monoblock-two-step (SureFil SDR flow + Ceram.X), Monoblock-two-step (Tetric EvoFlow Bulk-Fill + Tetric EvoCeram Bulk-Fill), Monoblock-one-step (Tetric EvoCeram Bulk-Fill), Monoblock with sonic activation (SonicFill2), and incremental technique (Filtek Z250). μ-CT scanning (SkyScan, Bruker, Belgium) assessed the number, volume of closed pores, and total porosity. Analysis of variance on ranks was used (Student-Newman-Keuls method and Mann-Whitney rank-sum test), to determine the significance of RBC viscosity and the sonication placement technique. The Spearman correlation method assessed the correlation between porosity characteristics (α = 0.05)., Results: The SonicFill2 presented a higher number of closed pores than the other groups (p < 0.05). The overall porosity within the restoration seemed greater in this order: Filtek Z250 > SonicFill2 > Tetric EvoFlow Bulk-Fill + Tetric EvoCeram Bulk-Fill > Tetric EvoCeram Bulk-Fill > SureFil SDR Flow + Ceram.X. Sonication was associated with increased number (p = 0.005) and volume (p = 0.036) of closed pores. A strong correlation was observed between the number and volume of closed pores (R 2  = 0.549, p < 001)., Conclusions: The monoblock technique with sonic activation showed significantly more internal porosity than the other placement techniques. Sonication during application contributed to the higher number and volume of closed pores than the passive bulk-fill application., Clinical Relevance: Using bulk-fill materials enhances efficiency, yet void formation remains an issue, depending on viscosity and active/passive delivery of materials. Clinicians must familiarize themselves with effective placement techniques to reduce void formation and optimizing treatment outcomes., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

This systematic review investigated whether antimicrobial photodynamic therapy (aPDT) after chemomechanical root canal disinfection (CD) yields a greater microbial load reduction than only CD. An electronic literature search was conducted on four databases up to November 2022, with no language or publication date restrictions. Randomized and non-randomized clinical trials were included if participants had a primary endodontic infection in permanent teeth, and if microbial loads before and after using aPDT were compared. Two researchers independently screened titles and abstracts to determine study eligibility. Assessments included risk of bias and methodological quality. This review was registered in PROSPERO (CRD42020181783). Eight studies were included in the qualitative analysis, and six were eligible for meta-analysis. In the random effects model, aPDT significantly improved the results of root canal disinfection when compared with standard protocols for cleaning and shaping (p = 0.04, 95% CI -1.72, -0.05). Subgroup analysis suggested that aPDT has a better effect on reducing the load of anaerobic microorganisms (p = 0.003, 95% CI -3.36, -0.69). The use of aPDT as an adjunct to chemomechanical disinfection promotes additional reduction of the microbial load and, therefore, seems to improve the results of root canal treatments in permanent teeth with a primary endodontic infection. However, certainty of evidence should be improved., (© 2023. The Author(s), under exclusive licence to Springer-Verlag London Ltd., part of Springer Nature.)

Objectives: This study systematically revised the literature to answer the following question: do modeler liquids (MLs) affect the properties of direct resin-based composites (RBCs)?, Materials and Methods: The review followed the PRISMA statement, and the search was conducted in PubMed, Scopus, Web of Science, Embase, and Lilacs databases. Studies were included if they investigated the properties of RBCs prepared using the restorative dental modeling insertion technique (RDMIT). The risk of bias was performed with the RoBDEMAT tool. Statistical analyses were conducted using Review Manager, and heterogeneity was assessed with the Cochran Q test and I 2 statistics., Results: From 309 studies identified, 25 met the eligibility criteria, and 23 were meta-analyzed. In total, 27 MLs and 23 RBCs were evaluated. Modeled and non-modeled RBCs showed similar results in terms of cohesive strength, flexural strength, load-to-fracture, modulus of elasticity, work of fracture, degree of conversion, solubility, weight change, microhardness, and color change. Sorption and roughness benefited from the use of MLs, whereas translucency and whitening index were more adequate in the non-modeled RBCs. Aging affected similarly the modeled and non-modeled RBCs. Most studies showed a moderate risk of bias., Conclusions: Modeled and non-modeled RBCs performed similarly in most of the properties, and the use of non-solvated lubricants offered beneficial effects in some cases., Clinical Relevance: When a balance has to be made between the RDMIT and the conventional technique, our review supports the safe application of modeler liquids for the handling of composite increments during the sculpting fabrication of direct resin-based restorations., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Objectives: The purpose of this study was to correlate the translucency degree of varying resin composites with their radiopacity., Methods and Materials: Twenty-four resin composites (conventional or bulk-fill) of various shades and opacities were selected from the following manufacturers: 3M ESPE (nanofilled), Ivoclar (nanohybrid), and FGM (microhybrid). Resin composite samples (n=5) were prepared (5-mm diameter × 1.5-mm thickness) for comparison using prepared samples of human dentin and enamel as controls. The translucency of each sample was measured using the translucent parameter (TP) method with a digital spectrophotometer (Vita Easyshade) and CIEL*a*b* color system over white and black backgrounds. The samples were also x-rayed using a photostimulable phosphor plate system for measurement of their radiopacity (in mmAl). All data were analyzed using one-way ANOVA and Student-Newman-Keuls (α=0.05); data for TP and radiopacity were correlated using the Spearman correlation test., Results: Overall, the translucent shades and bulk-fill resin composites showed greater translucency than the other resins. While "body" and "enamel" shades demonstrated intermediate translucency to dentin and enamel, the "dentin" shades were more standardized, showing similar translucency to human dentin. All tested resin composites showed similar or greater radiopacity to human enamel, except the Empress Direct (Ivoclar) resin with Trans Opal shade, which was not radiopaque. Dentin and enamel showed radiopacity similar to 1 and 2 mmAl (millimeters of aluminum), respectively., Conclusions: The resin composites investigated in this study differed regarding their translucency degree and radiopacity level, without any positive relationship between the two properties., (©Operative Dentistry, 2023.)

Purpose: To evaluate denture cleansing solutions regarding the surface roughness and color stability of two resilient liners with distinct optical characteristics used for the maximum recommended period of use., Methods: The specimens of each resilient liner, transparent and white, were randomly distributed into groups (n= 15) of a daily 20-minute immersion simulation of 0.25%, 0.5% and 1% sodium hypochlorite (SH) and 4% acetic acid solutions. Surface roughness (Ra) and color stability (ΔE CIELab formula and NBS systems) were measured after 7, 14, 21, 30, 60, 90, 180, and 270 days. The factors of variations analyzed were material, solutions, and time of immersion. Statistical analysis used three-way ANOVA and Tukey tests (Ra), and repeated measure ANOVA (ΔE and NBS systems), P< 0.05., Results: For Ra analysis, the variations occurred regardless of time and solution, as the white liner showed the greatest changes (P< 0.001). Regarding interactions between solution and time, in the period of 21 days until 270 days, Ra was equivalent for all solutions (P= 0.001). ΔE analysis showed a difference between solutions (P= 0.000) and interaction between time and solution (P= 0.000). For the transparent liner, the greatest changes were found for 1% SH after 60 days, however, at 270 days there was a color change equivalence with 0.5% SH, while 4% acetic acid solution showed intermediate values. For the white liner, 1% SH showed the highest color changes for all evaluated times, and the other evaluated solutions were similar after 270 days. For both resilient liners, 0.25% SH showed the smallest changes for the evaluated properties., Clinical Significance: The changes found were dependent on the concentration of the solution used, as well as the length of exposure to the solution. In addition, the white resilient liner showed to be less susceptible to color changes. For both resilient liners, 0.25% sodium hypochlorite showed the least changes for the evaluated properties., Competing Interests: The authors declared no conflict of interest., (Copyright©American Journal of Dentistry.)

Objectives: This review evaluated the effects of the acidic composition of self-etch (SE) adhesives at the long-term bond strengths to dentin and enamel., Data: The review followed the PRISMA Extension Statement for network meta-analysis. Studies were identified by a systematic search in PubMed, Web of Science, and Scopus databases., Study Selection: The inclusion criteria were in vitro studies that evaluated bond strength data of samples analyzed at both immediate and long-term (after aging simulation) periods and that were bonded to sound dentin/enamel using SE adhesives, with at least one group of adhesives being based on 10-MDP (10-methacryloyloxy-decyl-dihydrogen-phosphate; control) and the other group being comprised of alternative acidic monomers. Statistical analyses were conducted using two methods: standard pairwise meta-analysis (SPMA) and Bayesian network meta-analysis (NMA). Heterogeneity was assessed by using the Cochran Q test and I 2 statistics., Results: From 5220 studies identified, 87 met the eligibility criteria and 83 were meta-analyzed. Seventeen adhesives were based on 10-MDP and 44 systems were based on alternative acids. The resin-dentin/enamel bonds were predominantly reduced after aging (∼84% of cases). From the SPMA findings, the following acidic compositions showed lower bond strength values (effect size: mean difference [MD] with 95% confidence interval [95% CI]) than 10-MDP: 4-META (MD -4.99, 95% CI: -7.21, -2.78; p<0.001); sulfonic acids (MD -9.59, 95% CI -12.19, -6.98; p<0.001); unspecified phosphate esters (MD -8.89, 95% CI -17.50, -0.28; p = 0.04); or mixed acids (MD -11.0, 95% CI -13.62, -8.38; p<0.001). The dental bonds were benefited from the presence of 10-MDP upon longer aging (>6 months). From the NMA probabilistic findings, adhesives based on 10-MDP and phosphonic acids ranked as having the best and the worst bonding potential to dentin, respectively. More than one composition (phosphonic acids and mixed acids) ranked similarly to 10-MDP in enamel. The studies scored as having moderate risk of bias (58.6%), followed by low (39.1%) and high (2.3%) risk of bias., Conclusion: 10-MDP is an outstanding acidic monomer that contributes to higher bonds to dentin at the long-term. In enamel, there is no evidence that one acidic composition prevails over the other., Clinical Significance: The acidic composition of SE adhesives affects the resistance of dental bonds after simulated aging, with 10-MDP playing a significant role in the adhesion to dentin but not to the enamel., Registration Number: This report is registered at the Open Science Framework (osf.io/urtdf)., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022. Published by Elsevier Ltd.)

Objectives: This work sought to formulate photocrosslinkable chlorhexidine (CHX)-laden methacrylated gelatin (CHX/GelMA) hydrogels with broad spectrum of action against endodontic pathogens as a clinically viable cell-friendly disinfection therapy prior to regenerative endodontics procedures., Methods: CHX/GelMA hydrogel formulations were successfully synthesized using CHX concentrations between 0.12 % and 5 % w/v. Hydrogel microstructure was evaluated by scanning electron microscopy (SEM). Swelling and enzymatic degradation were assessed to determine microenvironmental effects. Compression test was performed to investigate the influence of CHX incorporation on the hydrogels' biomechanics. The antimicrobial and anti-biofilm potential of the formulated hydrogels were assessed using agar diffusion assays and a microcosms biofilm model, respectively. The cytocompatibility was evaluated by exposing stem cells from human exfoliated deciduous teeth (SHEDs) to hydrogel extracts (i.e., leachable byproducts obtained from overtime hydrogel incubation in phosphate buffer saline). The data were analyzed using One- and Two-way ANOVA and Tukey's test (α = 0.05)., Results: CHX/GelMA hydrogels were effectively prepared. NMR spectroscopy confirmed the incorporation of CHX into GelMA. The addition of CHX did not change the micromorphology (pore size) nor the swelling profile (p > 0.05). CHX incorporation reduced the degradation rate of the hydrogels (p < 0.001); whereas, it contributed to increased compressive modulus (p < 0.05). Regarding the antimicrobial properties, the incorporation of CHX showed a statistically significant decrease in the number of bacteria colonies at 0.12 % and 0.5 % concentration (p < 0.001) and completely inhibited the growth of biofilm at concentration levels 1 %, 2 %, and 5 %. Meanwhile, the addition of CHX, regardless of the concentration, did not lead to cell toxicity, as cell viability values were above 70 %., Significance: The addition of CHX into GelMA showed significant antimicrobial action against the pathogens tested, even at low concentrations, with the potential to be used as a cell-friendly injectable drug delivery system for root canal disinfection prior to regenerative endodontics., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Background: The evidence on the relationship between anxiety and depression and patients with distinct subtypes of temporomandibular disorder (TMD) is uncertain, so a thorough review study on the topic is still missing., Objectives: This systematic review investigated the distribution and severity of anxiety and depression in patients diagnosed with different subtypes of TMD., Methods: The study is registered in PROSPERO (CRD42020150562) and it followed the PRISMA 2020 Statement. We searched in PubMed, Web of Science, Scopus and SciELO databases (last search: 12 March 2021) and the reference list from the included studies. Study eligibility criteria consisted of: (i) patients diagnosed with TMD using the Research Diagnostic Criteria (RDC/TMD) or Diagnostic Criteria (DC/TMD) instruments; (ii) assessment of anxiety and/or depression with validated psychological instruments and (iii) allocation of patients into a minimum of two distinct TMD subtypes with at least one group having myofascial pain (comparison group). Analyses were carried out using RevMan 5.3.5 statistical package and random- or fixed-effects models (α = 0.05). The quality of evidence was assessed based on review authors' judgment derived from a 10-item appraisal tool for prevalence studies and with the Newcastle-Ottawa scale., Results: Of the 4086 records identified in total, 24 were eligible for inclusion; meta-analyses were conducted with 20 studies. In total, 3678 subjects were included in the review. Most of the studies found that patients with myofascial pain showed similar occurrence and severity of anxiety/depression as compared to other subtypes of TMD, although the average prevalence seemed to be higher among the diagnoses consisting of myofascial pain (muscular TMD). Despite the moderate-to-high heterogeneity, anxiety and depression were more frequently distributed within patients with myofascial pain (p = .001). TMD patients without myofascial pain presented less severe levels of anxiety and depression than patients with only myofascial pain (p ≤ .01). The type of psychological instrument seems to affect the assessment of both anxiety and depression emotional states., Conclusion: The findings of this review suggest that patients with myofascial pain are more anxious and more depressed than patients with other subtypes of TMD., Implications: Considering that anxiety and depression are differently distributed within the TMD population, a proper assessment of the psychological state of patients seems essential to offer an adequate treatment and management of each specific subtype of TMD., (© 2022 John Wiley & Sons Ltd.)

Objective: To evaluate the physical and biological properties of different types of flowable resin composites and their bonding ability to dentin, comparing the performance of self-adhesive and bulk-fill materials with a conventional control., Methods and Materials: Four flowable resin composites were tested: two self-adhesive (Y-flow [SA&#95;YF]; and Dyad Flow [SA&#95;DF]); one bulk-fill (Filtek Bulk Fill Flow [BF]); and one conventional composite (Opallis Flow [OF]). The microshear bond strength (μSBS) to dentin (bovine samples) was investigated at 24 hours and 6 months of storage. The materials were also characterized by degree of conversion, cross-link density, water contact angle, color stability, and cell viability (ISO 10993-5/2009) analyses. Data were analyzed using Analysis of Variance and Tukey tests (α=0.05)., Results: The μSBS values were higher for control specimens at 24 hours, whereas the resin-dentin bonds were similarly distributed among the groups after aging. Adhesive failure was the most frequent pattern observed at both time intervals. SA&#95;YF was the only material that increased the bond strength over time. Degree of conversion increased in the following order: SA&#95;YF (28.6±1.4%) < BF (49.7±0.8%) < OF (60.0±2.0%) = SA&#95;DF (63.6±2.3%). Cross-link density was similar among all materials. The self-adhesive composites were more hydrophilic than the other types, with BF showing the lowest water contact angle and the greatest color alteration. All resin composites had a biocompatible behavior., Conclusion: Chemical composition appeared to be an influential factor affecting the physico-mechanical and biological behavior of the materials tested., (©Operative Dentistry, 2022.)

This study explores the effects of aging (thermal cycling and cyclic loading-TC/CL) and different light-curing unit (LCU) types on the volume characteristics and internal porosity of a bulk-fill resin-based composite restoration. Occlusal cavities (4 × 4 × 3 mm) were prepared on extracted human molars (n = 5). Tetric N-Bond Universal was applied, and the cavities were restored using Tetric-N-Ceram Bulk Fill. Photoactivation was performed using a quartz-tungsten halogen (QTH) or a multiple-emission peak light-emitting diode (MLED). Digital images for all restorations were obtained using microcomputed tomography (micro-CT) before (baseline) and after (post-aging) TC/CL (5,000 TC cycles in 5-55 °C baths and a dwell time of 30 s followed by 10,000 sinusoidal CL load cycles in an Instron B3000 at 2 Hz and 10-110 N) and storage (37 °C) for three months. For the micro-CT analysis, three-dimensional images were used to determine the restoration volume and internal porosity. Data were analyzed using a two-way ANOVA and Tukey's test (p < 0.05). Restorations photoactivated with QTH exhibited a higher object volume than the LED group at baseline and in post-aging conditions without any significant differences in the other evaluated characteristics. All volume/porosity characteristics increased considerably after TC/CL aging, except for the object volume of the QTH group and the closed porosity of the MLED group. The change in all the volume/porosity characteristics between both LCU groups after TC/CL were not significantly different. Thus, the aging process simulated herein increased the volume and porosity characteristics of the bulk-fill restoration, and no significant differences were obtained between the QTH and MLED equipment., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2022 The Authors.)

This study aimed at engineering cytocompatible and injectable antibiotic-laden fibrous microparticles gelatin methacryloyl (GelMA) hydrogels for endodontic infection ablation. Clindamycin (CLIN) or metronidazole (MET) was added to a polymer solution and electrospun into fibrous mats, which were processed via cryomilling to obtain CLIN- or MET-laden fibrous microparticles. Then, GelMA was modified with CLIN- or MET-laden microparticles or by using equal amounts of each set of fibrous microparticles. Morphological characterization of electrospun fibers and cryomilled particles was performed via scanning electron microscopy (SEM). The experimental hydrogels were further examined for swelling, degradation, and toxicity to dental stem cells, as well as antimicrobial action against endodontic pathogens (agar diffusion) and biofilm inhibition, evaluated both quantitatively (CFU/mL) and qualitatively via confocal laser scanning microscopy (CLSM) and SEM. Data were analyzed using ANOVA and Tukey's test (α = 0.05). The modification of GelMA with antibiotic-laden fibrous microparticles increased the hydrogel swelling ratio and degradation rate. Cell viability was slightly reduced, although without any significant toxicity (cell viability > 50%). All hydrogels containing antibiotic-laden fibrous microparticles displayed antibiofilm effects, with the dentin substrate showing nearly complete elimination of viable bacteria. Altogether, our findings suggest that the engineered injectable antibiotic-laden fibrous microparticles hydrogels hold clinical prospects for endodontic infection ablation.

Aim: To investigate predisposing aspects related to the indication for root canal treatment (RCT) at Dental Schools of Brazil., Methods: Data of 207 patients referred to endodontic treatment at undergraduate Dental Schools of Brazil were collected over a period of 8 months. Patient-related data included age, gender, first dental visit, tooth brushing frequency, number of remaining teeth, and previous endodontic treatment, and tooth-related information regarding number, type, and location in the mouth of teeth that need RCT, waiting time for the endodontic treatment, endodontic diagnosis, pain report, and dental crown condition was collected for each participant. Bivariate analysis (Chi-square test; p < 0.05) associated gender and tooth/patient-related conditions. Poisson regression analysis compared multiple endodontic need and exposure variables., Results: Patients were mainly comprised of women (65.2%), aged 18-39 years (69.6%). Previous RCT was significantly more prevalent in women when compared to men ( p =0.005). First dental visit at later moment (after 20 years of age) demonstrated 400% greater prevalence of multiple RCT demand when compared to patients that attended the dental office at age below seven years ( p =0.032). Most of the patients presented only one tooth needing RCT (80.2%), mainly premolars (44.9%). Interestingly, women underwent more RCT in maxillary teeth ( p =0.016) and significantly contributed with their report to the diagnosis process when compared to men ( p =0.014). Regarding dental crown condition, 45.4% of all teeth registered unsatisfactory restorations, which were more pronounced in female patients ( p =0.018). Unsatisfactory restorations or dental caries had 75% and 82%, respectively, less prevalence of multiple RCT indication when compared to sound dental crown ( p =0.001)., Conclusions: RCT was undertaken more frequently in young female adults' premolars presenting unsatisfactory restorations. First dental visit, number of teeth with previous endodontic treatment, tooth group, and dental crown condition were significantly associated with the necessity of multiple endodontic treatments., Competing Interests: The authors declare that they have no conflicts of interest., (Copyright © 2021 Maria Tereza Pedrosa Albuquerque et al.)

Objective: The purpose of this systematic review and meta-analysis was to analyze the literature on the bond strength of self-etching (SE) adhesives containing 10-MDP or other acidic functional monomers, comparing the bonding performance of both compositions., Methods: This study is registered in PROSPERO (CRD42020175715) and it followed the PRISMA Statement. The literature search was performed in PubMed, Web of Science, SciELO, Scopus, LILACS, IBECS, and BBO from the starting coverage date through 30 June 2021. Study eligibility criteria consisted of in vitro studies that evaluated the bond strength (microtensile, microshear, tensile or shear testing) to sound dentin/enamel of a minimum of two distinct SE systems, with at least one material containing 10-MDP and one other being comprised of a distinct acidic composition. Statistical analyses were carried out with RevMan 5.3.5 and using random-effects models with the significance level at p < 0.05. Also, Bayesian network meta-analysis (NMA) was conducted using MetaInsight V3 tool., Results: From 740 relevant studies evaluated in full-text analysis, 210 were incorporated to the systematic review and 206 in meta-analysis. The majority of studies was classified as having medium risk of bias (56.7%), followed by low (35.2%) and high (8.1%) risk of bias. Data from a total of 64 adhesive systems were collected, which favored the 10-MDP-based group at both dentin (overall effect: 6.98; 95% CI: 5.61, 8.36; p < 0.00001) and enamel (overall effect: 2.79; 95% CI: 1.62, 3.96; p < 0.00001) substrates. Microtensile testing was more frequently used (73.4%) in the included studies. Adhesives based on 10-MDP showed greater bonding performance than adhesives comprised of monomers such as PENTA, 6-MHP, 4-META, 4-MET, pyrophosphate esters, mixed composition or monomers derived from sulfonic acid (p ≤ 0.01); whereas similar bond strength values were verified between 10-MDP-based materials and those containing PEM-F, acrylamide phosphates, 4-AET, MAC-10, or monomers derived from polyacrylic and phosphonic acids (p ≥ 0.05). Adhesives based on GPDM were the only ones that resulted in greater bonding potential than the 10-MDP-based group (p = 0.03). Dental bonds in dentin were favored with the application of 2-step 10-MDP-based adhesives; whereas in enamel the dental bonds were favored for both 2-steps versions of adhesives, regardless of the presence of 10-MDP. Indirect evidence from NMA revealed that 1-step 10-MDP-free and universal 10-MDP-free adhesives seemed to perform worst in dentin and enamel, respectively., Significance: Adhesives containing 10-MDP showed higher bonding performance than materials formulated with other acidic ingredients, although this result relied on the type of mechanical testing, type of the substrate, acidic composition of the adhesive, and the application category of the SE system. This review summarized the effects of the foregoing factors on the adhesion to dental substrates., (Copyright © 2021 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.)

Objectives: This study aimed to evaluate the effects of nanohydroxyapatite (nHAp) particles on the morphological, chemical, physical, and biological properties of chitosan electrospun nanofibers., Materials and Methods: nHAp particles with a 1.67 Ca/P ratio were synthesized via the aqueous precipitation method, incorporated into chitosan polymer solution (0.5 wt%), and electrospun into nHAp-loaded fibers (ChHa fibers). Neat chitosan fibers (nHAp-free, Ch fibers) were used as the control. The electrospun fiber mats were characterized using morphological, topographical, chemical, thermal, and a range of biological (antibacterial, antibiofilm, cell viability, and alkaline phosphatase [ALP] activity) analyses. Data were analyzed using ANOVA and Tukey's test (α = 0.05)., Results: ChHa fibers demonstrated a bead-like morphology, with thinner (331 ± 110 nm) and smoother (Ra = 2.9 ± 0.3 μm) distribution as compared to the control fibers. Despite showing similar cell viability and ALP activity to Ch fibers, the ChHa fibers demonstrated greater antibacterial potential against most tested bacteria (except for P. intermedia), and higher antibiofilm activity against P. gingivalis biofilm., Conclusions: The incorporation of nHAp particles did not jeopardize the overall morphology, topography, physical, and biological characteristics of the chitosan nanofibers., Clinical Relevance: The combination of nHAp particles with chitosan can be used to engineer bioactive, electrospun composite nanofibers with potential applications in regenerative dentistry.

The purpose of this study was two-fold: (i) to investigate whether the thermal treatment of direct dental resin composites (RCs) using microwave or autoclave heating cycles would modify the materials' strength as compared to the protocol without heating (control); and (ii) to compare the mechanical performance of direct and indirect RCs. Three RCs (from 3M ESPE) were tested: one indirect (Sinfony); and two direct materials (microhybrid - Filtek Z250; and nanofilled - Filtek Z350). Specimens from the direct RCs were prepared and randomly allocated into three groups according to the thermal treatment (n = 10): Control - no thermal treatment was performed; Microwave - the wet heating was performed using a microwave oven; and Autoclave - the wet heating was performed in an autoclave oven. The indirect RC was prepared following the instructions of the manufacturer. All materials were tested using flexural strength, elastic modulus, work of fracture (W f ), microhardness, and scanning electron microscopy (SEM) analyses. Data were analyzed with ANOVA and Tukey as well as Weibull analysis (α = 0.05). The thermal treatments tended to produce slight changes in the topography of direct RCs, especially by the autoclave' wet heating. Overall, the physico-mechanical properties changed after thermal treatment, although this effect was dependent on the type of RC and on the heating protocol. Sinfony showed the lowest modulus and hardness of the study, although it was the most compliant system (higher work of fracture). The load-deflection ability was also greater for the indirect RC. Reliability of the tested materials was similar among each other (p > 0.05). In conclusion, the alternative thermal treatments suggested here may significantly influence some aspects of the mechanical behavior of dental resin composites, with negative effects relying on both the chemical composition of the restorative material as well as on the wet heating protocol used. Clinicians should be aware of the possible effects that additional wet heating of direct resin composites using microwave or autoclave thermal protocols as performed here could have on the overall fracture and mechanical responses during loading circumstances., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Despite all the advances in adhesive dentistry, dental bonds are still fragile due to degradation events that start during application of adhesive agents and the inherent hydrolysis of resin-dentin bonds. Here, we combined two outstanding processing methods (electrospinning and cryomilling) to obtain bioactive (antimicrobial and anti-metalloproteinase) fiber-based fillers containing a potent matrix metalloproteinase (MMP) inhibitor (doxycycline, DOX). Poly(ε)caprolactone solutions containing different DOX amounts (0, 5, 25, and 50 wt%) were processed via electrospinning, resulting in non-toxic submicron fibers with antimicrobial activity against Streptococcus mutans and Lactobacillus. The fibers were embedded in a resin blend, light-cured, and cryomilled for the preparation of fiber-containing fillers, which were investigated with antibacterial and in situ gelatin zymography analyzes. The fillers containing 0, 25, and 50 wt% DOX-releasing fibers were added to aliquots of a two-step, etch-and-rinse dental adhesive system. Mechanical strength, hardness, degree of conversion (DC), water sorption and solubility, bond strength to dentin, and nanoleakage analyses were performed to characterize the physico-mechanical, biological, and bonding properties of the modified adhesives. Statistical analyses (ANOVA; Kruskal-Wallis) were used when appropriate to analyze the data (α = 0.05). DOX-releasing fibers were successfully obtained, showing proper morphological architecture, cytocompatibility, drug release ability, slow degradation profile, and antibacterial activity. Reduced metalloproteinases (MMP-2 and MMP-9) activity was observed only for the DOX-containing fillers, which have also demonstrated antibacterial properties against tested bacteria. Adhesive resins modified with DOX-containing fillers demonstrated greater DC and similar mechanical properties as compared to the fiber-free adhesive (unfilled control). Concerning bonding performance to dentin, the experimental adhesives showed similar immediate bond strengths to the control. After 12 months of water storage, the fiber-modified adhesives (except the group consisting of 50 wt% DOX-loaded fillers) demonstrated stable bonds to dentin. Nanoleakage was similar among all groups investigated. DOX-releasing fibers showed promising application in developing novel dentin adhesives with potential therapeutic properties and MMP inhibition ability; antibacterial activity against relevant oral pathogens, without jeopardizing the physico-mechanical characteristics; and bonding performance of the adhesive.

This study aimed to synthesize and characterize non-woven acrylonitrile butadiene styrene (ABS), polyamide-6 (P6), and polystyrene (PS) nanofibers, and evaluate their effects on the flexural strength and fracture resistance of fiber-modified polymethyl methacrylate (PMMA) resin. ABS, P6, and PS polymer solutions were prepared and electrospun into fiber mats, which were characterized by means of morphological, chemical, physical, and mechanical analyses. The fiber mats were then used to modify a thermally-activated PMMA resin, resulting in four testing groups: one unmodified group (control) and three fiber-modified groups incorporated with ABS, P6, or PS fiber mats. Flexural strength, work of fracture, and fractographic analysis were performed for all groups. Data were analyzed using Kruskal-Wallis or ANOVA tests (α = 0.05). The fiber diameter decreased, respectively, as follows: ABS > P6 > PS. Only the P6 fiber mats demonstrated a crystalline structure. Wettability was similar among the distinct fiber mats, although tensile strength was significantly greater for P6, followed by ABS, and then PS mats. Flexural strength of the fiber-modified PMMA resins was similar to the control, except for the weaker P6-based material. The work of fracture seemed to be greater and lower when the P6 and PS fibers were used, respectively. The fiber-modified groups exhibited a rougher pattern in the fractured surfaces when compared to the control, which may suggest that the presence of fibers deviates the direction of crack propagation, making the fracture mechanism of the PMMA resin more dynamic. While the neat PMMA showed a typical brittle response, the fiber-modified PMMA resins demonstrated a ductile response, combined with voids, suggesting large shear deformation during fracture. Altogether, despite the lack of direct reinforcement in the mechanical strength of the PMMA resin, the use of electrospun fibers showed promising application for the improvement of fracture behavior of PMMA resins, turning them into more compliant materials, although this effect may depend on the fiber composition., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Dental clinicians have relied for centuries on traditional dental materials (polymers, ceramics, metals, and composites) to restore oral health and function to patients. Clinical outcomes for many crucial dental therapies remain poor despite many decades of intense research on these materials. Recent attention has been paid to biomolecules as a chassis for engineered preventive, restorative, and regenerative approaches in dentistry. Indeed, biomolecules represent a uniquely versatile and precise tool to enable the design and development of bioinspired multifunctional dental materials to spur advancements in dentistry. In this review, we survey the range of biomolecules that have been used across dental biomaterials. Our particular focus is on the key biological activity imparted by each biomolecule toward prevention of dental and oral diseases as well as restoration of oral health. Additional emphasis is placed on the structure-function relationships between biomolecules and their biological activity, the unique challenges of each clinical condition, limitations of conventional therapies, and the advantages of each class of biomolecule for said challenge. Biomaterials for bone regeneration are not reviewed as numerous existing reviews on the topic have been recently published. We conclude our narrative review with an outlook on the future of biomolecules in dental biomaterials and potential avenues of innovation for biomaterial-based patient oral care.

Introduction: This review aimed to provide a critical appraisal of alternative antimicrobial strategies in lieu of traditional triple antibiotic paste (TAP)., Methods: This review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. The literature search was performed in 8 databases (PubMed/Medline, Embase, LILACS, Web of Science, Scopus, BVS, SciELO, and the Cochrane Library), selecting clinical, in vitro, in vivo, and in situ studies that evaluated antimicrobial alternatives to TAP in regenerative endodontics. Studies lacking an experimental TAP group were excluded., Results: A total of 1705 potentially relevant records were initially identified. From the 38 studies retrieved for full-text reading, 16 fulfilled all selection criteria and were included in the qualitative analysis. According to the study design, 11 studies were solely in vitro, 1 study was both in vitro and in vivo (animal model), 2 studies were solely animal experiments, and 2 studies were clinical trials. The alternative antimicrobial agents to TAP consisted of modified TAP formulations (eg, a combination of TAP with chitosan); TAP-eluting nanofibers; propolis; chlorhexidine (CHX) gels/solutions; double antibiotic pastes composed of distinct combinations of antibiotics; Ca(OH) 2 -based formulations; and sodium hypochlorite. Overall, most of the alternative agents performed similarly to TAP, although some strategies (eg, Ca(OH) 2 - and CHX-based formulations) seemed to present dubious importance in the control of infection., Conclusions: TAP still remains an excellent option in terms of the complete elimination of microorganisms. This review points to the use of electrospun fibers as a drug delivery system to offer a controlled release of the antimicrobial agent, as well as the use of natural compounds, deserving future investigation., (Copyright © 2020 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

This systematic review was focused on evaluating tooth autotransplantation, considering its impacts on the teeth, bone, soft tissues, and aesthetics in orthodontic patients. A bibliographic search was conducted without limitations on year of publication or language in the databases of PubMed, Web of Science, Scopus, Medline Complete, Cochrane, Clinical Trials, and Trials Central. For triage of articles, indications, surgical planning, orthodontic movement, risk factors for treatment, and long-term follow-ups were considered. For outcomes, the results with reference to teeth, alveolar bone, periodontal tissues, and esthetic satisfaction were considered. Risk of bias was evaluated using the methodological index for nonrandomized studies-MINORS. The results showed 10 controlled clinical trials, and no randomized clinical trials were found. The selected studies included 715 patients and 934 autotransplanted teeth among which there were premolars, molars, and anterior teeth evaluated in the long term, indicating that orthodontics associated with autotransplantation indicated a result that was generally clinically acceptable. The quality of the set of evidence was considered medium due to the presence of different methodological problems, risk of bias, and significant heterogeneity in the evaluated studies. There was a sufficient body of evidence that justified autotransplantation in patients who needed orthodontic movement. In teeth, there was an increase in root resorption influenced by orthodontics, but without impacting on the general clinical result in the long term. Bone and periodontal tissue do not appear to be affected by orthodontics. The patient's aesthetic satisfaction was not considered in the studies., Competing Interests: None declared.

Aim: The present study aimed to investigate the total number of visits required to conclude root canal treatments (RCTs) as well as the motivations associated to the choice of dentists practicing in low-income areas of Brazil., Materials and Methods: A total of 3,103 questionnaires were electronically and individually delivered to professionals of Salvador, Sergipe, and Alagoas (Brazil). The questionnaire encompassed sociodemographic data and questions regarding the number of sessions required to conclude RCT. Also, postoperative pain, professional qualification, the use of technological resources, and time for one-visit treatment were evaluated. Data were analyzed using Chi-square and Poisson regression analyses ( p < 0.05)., Results: A total of 326 responses were obtained with higher prevalence of specialists in the field of endodontics (36.8%). Dentists reported greater preference for rotary instrumentation (Alagoas 54.6%, Aracaju 62.1%, and Salvador 83.5%), and most of the participants reported multiple visits to treat root canals with the necrotic pulp tissue associated or not to periapical radiolucency, excluding Salvador (53.8%). Dentists who graduated in public dental schools were less likely to perform RCT of necrotic teeth with periapical lesion in one clinical appointment ( p = 0.034). The single-session therapy was positively associated to continuing education attendance ( p = 0.004) and to the occurrence of clinical complications ( p < 0.001). Dentists who graduated in lato sensu programs were more likely to conclude RCT in less than 60 minutes ( p < 0.001), although the occurrence of postoperative pain was more likely observed upon this scenario ( p < 0.001)., Conclusion: Despite the social inequalities in the analyzed area, professionals have been seeking for knowledge by means of continuing education programs and the implementation of technological resources in their clinical routine, although this fact has poorly influenced the acceleration of RCT. Clinical significances: The total number of visits to conclude endodontic treatment may be influenced by both professional and biological parameters such as the attendance to postgraduation programs and the use of technology as well as to the biological condition of the pulp and the occurrence of postoperative complications.

Objectives: The purpose of this study was to synthesize chlorhexidine (CHX)-encapsulated aluminosilicate clay nanotubes (Halloysite®, HNTs) and to incorporate them into the primer/adhesive components of an etch-and-rinse adhesive system (SBMP; Scotchbond Multipurpose, 3M ESPE) and to test their effects on degree of conversion, viscosity, immediate and long-term bonding to dentin., Methods: CHX-modified HNTs were synthesized using 10% or 20% CHX solutions. The primer and the adhesive components of SBMP were incorporated with 15wt.% of the CHX-encapsulated HNTs. Degree of conversion (DC) and viscosity analyses were performed to characterize the modified primers/adhesives. For bond strength testing, acid-etched dentin was treated with one of the following: SBMP (control); 0.2%CHX solution before SBMP; CHX-modified primers+SBMP adhesive; SBMP primer+CHX-modified adhesives; and SBMP primer+CHX-free HNT-modified adhesive. The microtensile bond strength test was performed after immediate (24h) and long-term (6 months) of water storage. Data were analyzed using ANOVA and Tukey (α=5%) and the Weibull analysis., Results: DC was greater for the CHX-free HNT-modified adhesive, whereas the other experimental adhesives showed similar DC as compared with the control. Primers were less viscous than the adhesives, without significant differences within the respective materials. At 24h, all groups showed similar bonding performance and structural reliability; whereas at the 6-month period, groups treated with the 0.2%CHX solution prior bonding or with the CHX-modified primers resulted in greater bond strength than the control and superior reliability., Significance: The modification of a primer or adhesive with CHX-encapsulated HNTs was an advantageous approach that did not impair the polymerization, viscosity and bonding performance of the materials, showing a promising long-term effect on resin-dentin bonds., (Copyright © 2020 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.)

Purpose: To investigate the mechanical performance and fracture behavior of endocrown restorations prepared using different composite materials and following a direct technique., Methods: Sound molars were cut at 2 mm above the cementoenamel junction, endodontically treated, and allocated according to the type of restoration (n = 7): without post (endocrowns) or with post (post-retained restorations). Endocrowns were fabricated with conventional composite (Filtek Z350); bulk fill composite (Filtek Bulk Fill); conventional composite modeled using resin adhesives (SBMP: Scotchbond Multipurpose Adhesive; or SBU: Scotchbond Universal Adhesive); and lithium disilicate ceramic (E.max; Positive control). The post-retained restorations were fabricated with glass-fiber post combined with conventional or bulk fill composites. All restorations were bonded following an etch-and-rise adhesive approach or self-adhesive resin cement. The teeth were submitted to fatigue (Byocycle) and compression (EMIC DL500) testing at a crosshead speed of 1 mm/min. Data were analyzed with ANOVA and Tukey (p < 0.05) and Weibull analysis was carried out in order to evaluate the reliability of restorations., Results: The bulk-fill-based endocrown showed a stronger performance than the control. The presence of SBMP or the use of bulk-fill composite resulted in the occurrence of less aggressive fractures than the other restorative systems. Endocrowns bonded directly to the tooth seemed to produce similar fracture strength properties as compared to endocrowns bonded using self-adhesive resin cementation. The bulk-fill-based endocrown showed the greatest reliability of study., Conclusion: Resin-based restorative materials seem to be interesting alternative options to fabricate large dental restorations in lieu of the more traditionally used glass ceramics or root canal post systems., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Objectives:  The focus of this triple-blind randomized study was to evaluate the mechanical properties, antibacterial effect, and in vivo biocompatibility of glass ionomer cements (GICs) modified with ethanolic extracts of propolis (EEP)., Materials and Methods:  For biocompatibility tests, 135 male Wistar rats were used and divided into nine groups: Group C (control, polyethylene), Groups M, M10, M25, M50 (Meron; conventional, and modified with 10%, 25%, 50% EEP, respectively), Groups KC, KC10, KC25, KC50 (Ketac Cem; conventional, and modified with 10%, 25%, 50% EEP, respectively). The tissues were analyzed under an optical microscope for different cellular events in different time intervals. Shear bond strength test (SBST) on cementation of metal matrices ( n = 10, per group), adhesive remnant index (ARI) in bovine incisors ( n = 10, per group), and antibacterial properties by the agar diffusion test ( n = 15, per group) were analyzed., Statistical Analysis:  Data were analyzed by Kruskal-Wallis test followed by Dunn, and one-way analysis of variance test followed by Tukey's test ( p < 0.5)., Results:  Morphological evaluation demonstrated intense inflammatory infiltrate in Groups M10 and KC10 in the time intervals of 7 ( p = 0.001) and 15 ( p = 0.006) days. Multinucleated giant cells were shown to be more present in Group M1, with statistical difference from Control and KC50 Groups in the time interval of 7 days ( p = 0.033). The SBST showed no statistical significance among the groups ( p > 0.05). Antibacterial property showed a statistically significant difference between Meron and Meron 50%-EEP Groups, and between Ketac and Ketac 50%-EPP Groups ( p = 0.001)., Conclusions:  The intensity of histological changes resulting from the cements was shown to be inversely proportional to the concentration of propolis added; Ketac 50%-EPP was the concentration that had the most favorable biocompatibility results. Addition of EEP to GIC did not negatively change the SBST and ARI. Antibacterial property demonstrated a concentration-dependent effect., Competing Interests: None declared.

Background: The focus of this study was to evaluate the antimicrobial, mechanical properties and biocompatibility of glass ionomer (GICs) modified by Chlorhexidine (CHX)., Material and Methods: For biocompatibility, 105 male Wistar rats were used, divided into 7 groups (n=15): Group C (Control,Polyethylene), Groups M, M10, M18, and Groups RL, RL10, RL18 (M-Meron and RL-Riva Luting: conventional, and modified with 10%, and 18% CHX, respectively). The tissues were analyzed under optical microscope for different cellular events and time intervals. Antibacterial effect and Shear Bond Strength Test (SBST) were also analyzed. Biocompatibility was analyzed by the Kruskal-Wallis and Dunn tests; SBST one-way ANOVA and Tukey test ( P <0.05). For the antibacterial effect, the Kruskal-Wallis and Friedman, followed by Dunn ( P <0.05) tests were used., Results: Morphological study of the tissues showed inflammatory infiltrate with significant differences between Groups C and RL18, in the time intervals of 7( P =0.013) and 15( P =0.032) days. The antimicrobial effects of the cements was shown to be CHX concentration-dependent ( P =0.001). The SBST showed no significant difference between the Groups of Meron cement (P=0.385), however, there was difference between Group RL and Groups RL10 and RL18 ( P =0.001)., Conclusions: The addition of CHX did not negatively influence the SBST. Meron-CHX-10% was the most biocompatible, and Riva-CHX-18% had more influence on the inflammatory process and presented slower tissue repair. Key words: Glass ionomer, chlorhexidine, biocompatibility, antimicrobial properties, microscope., Competing Interests: Conflicts of interest The authors declare no conflict of interest in this study., (Copyright: © 2020 Medicina Oral S.L.)

Introduction: Curcumin incorporation into polymeric fibers was tested for its antimicrobial properties and potential use in root canal disinfection., Methods: Curcumin-modified fibers were processed via electrospinning and tested against a 7-day old established Actinomyces naeslundii biofilm. The medicaments tested were as follows: curcumin-modified fibers at 2.5 and 5.0 mg/mL, curcumin-based irrigant at 2.5 and 5.0 mg/mL, saline solution (negative control), and the following positive controls: 2% chlorhexidine, 1% sodium hypochlorite, and triple antibiotic paste (TAP, 1 mg/mL). All medicaments, except for the positive controls, were allocated according to the light exposure protocol (ie, photoactivation with a light-emitting diode every 30 seconds for 4 minutes or without photoactivation). After treatment, the medicaments were removed, and 1 mL saline solution was added; the biofilm was scraped from the well and used to prepare a 1:2000 dilution. Spiral plating was performed using anaerobic blood agar plates. After 24 hours, colony-forming units (colony-forming units/mL, n = 11/group) were counted to determine the antimicrobial effects., Results: Data exhibited significant antimicrobial effects on the positive control groups followed by the curcumin irrigants and, lastly, the photoactivated curcumin-modified fibers. There was a significant reduction of viable bacteria in curcumin-based irrigants, which was greater than the TAP-treated group. Curcumin-free fibers, saline, and the nonphotoactivated curcumin-modified fibers did not display antimicrobial activity., Conclusions: Curcumin seems to be a potential alternative to TAP when controlling infection, but it requires a minimal concentration (2.5 mg/mL) to be effective. Photoactivation of curcumin-based medicaments seems to be essential to obtain greater antibiofilm activity., (Copyright © 2019 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

Aim: To gather information regarding endodontic treatment protocols and continuing education attendance of dentists in some cities located in Northeastern Brazil (Sergipe and Bahia States), a region that comprises a very-low-income population., Methods: A questionnaire containing different questions (e.g., routine treatment protocols, the use of new technologies, time required to conclude the treatment, and attendance in an endodontic continuing education) was distributed to 250 dentists. The collected data were analyzed through descriptive statistics and Poisson regression ( p < 0.05)., Results: A total of 199 dentists practicing endodontic treatment in the cities of Aracaju ( n  = 58), Salvador ( n  = 83), and towns of Estância ( n  = 8), Itabaiana ( n  = 16), Itabaianinha ( n  = 5), Lagarto ( n  = 10), Ribeirópolis ( n  = 3), Simão Dias ( n  = 6), and Tobias Barreto ( n  = 10) participated in this research. Most of the respondents have concluded their graduation in Dentistry in less than 10 years (62.3%), with nearly 75.4% of the sample having attended postgraduation education in the field. Regarding treatment protocols, the frequency for using rotary/reciprocating systems and for always using rubber dam isolation during root canal treatment (RCT) was 78% and 62%, respectively, which was also more prevalent among dentists who attended a continuous education program ( p < 0.05). Lastly, the professionals who attended ( p < 0.05) to a continuous education program in Endodontics were more frequently associated to performing incisors and molars RCT in one clinical appointment ( p < 0.05)., Conclusions: The results of this survey indicated that even in an area where most of the population has low-income conditions, the professionals are seeking for knowledge by attending to postgraduation programs, following the new tendencies in Endodontics with most of the professionals having employed technological resources., Competing Interests: The authors declare that there are no conflicts of interest regarding the publication of this paper., (Copyright © 2019 Maria Tereza Pedrosa Albuquerque et al.)

Purpose: To investigate the mechanical performance and fracture reliability of new generation, bulk-fill resin composites of different viscosities., Methods: Forty sound maxillary premolars were prepared into Class I cavities comprised of 5 mm width × 5 mm length × 5 mm thickness. The teeth were randomly allocated into four groups (n = 10) according to the restorative material: Negative control - without restoration; Positive control - conventional resin composite (Opallis; FGM) was applied using increments of up to 2.0 mm-thick; Bulk-Regular - bulk-fill resin composite of regular viscosity (Opus Bulk Fill; FGM) was applied using a single increment of 5 mm-thick; and Bulk-Flow - a low-viscosity bulk-fill resin composite (Opus Bulk Fill Flow; FGM) was applied as the first increment with ∼3.5 mm-thick, followed by two final increments of Opallis (∼1.5 mm-thick). The teeth were stored at 37 °C, for 24 h, and submitted to a mechanical testing machine (DL500; EMIC) under a compressive loading. Work of fracture (W f ) was also obtained. All data were analyzed using ANOVA and Tukey (α = 5%). Reliability of restorations and probability of failure were analyzed by Weibull analysis., Results: The non-restored teeth showed the weakest behavior of the study. All the restored groups demonstrated similar mechanical properties to each other (p ≥ 0.242). The positive and negative controls failed exclusively within the cohesiveness of enamel/dentin, whereas the bulk-fill-based restorations showed a mixture of cohesive and mixed failures. The restored groups showed an overall similar reliability, although the Bulk-Regular group demonstrated greater characteristic strength than the positive control., Conclusion: The novel bulk-fill resin composites of low and regular viscosities show promising application in the restoration of Class I cavities in premolars, demonstrating similar mechanical performance and reliability as compared with restorations prepared using conventional resin composites. From the bulk-fill materials, the version with regular viscosity presented the greatest compliant behavior of the study., (Copyright © 2019. Published by Elsevier Ltd.)

Evoked bleeding (EB) clinical procedure, comprising a disinfection step followed by periapical tissue laceration to induce the ingrowth of undifferentiated stem cells from the periodontal ligament and alveolar bone, is currently the only regenerative-based therapeutic approach to treating pulp tissue necrosis in undeveloped (immature) permanent teeth approved in the United States. Yet, the disinfection step using antibiotic-based pastes leads to cytotoxic, warranting a biocompatible strategy to promote root canal disinfection with no or minimal side-effects to maximize the regenerative outcomes. The purpose of this investigation was to develop a tubular three-dimensional (3D) triple antibiotic-eluting construct for intracanal drug delivery. Morphological (scanning electron microscopy), chemical (Fourier transform infrared spectroscopy), and mechanical (tensile testing) characteristics of the polydioxanone-based triple antibiotic-eluting fibers were assessed. The antimicrobial properties of the tubular 3D constructs were determined in vitro and in vivo using an infected (Actinomyces naeslundii) dentin tooth slice model and a canine method of periapical disease, respectively. The in vitro data indicated significant antimicrobial activity and the ability to eliminate bacterial biofilm inside dentinal tubules. In vivo histological findings demonstrated that, using the EB procedure, the tubular 3D triple antibiotic-eluting construct allowed the formation of an appropriate environment that led to apex closure and the ingrowth of a thin layer of osteodentin-like tissue into the root canal. Taken together, these findings indicate that our novel drug delivery construct is a promising biocompatible disinfection strategy for immature permanent teeth with necrotic pulps. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1576-1586, 2019., (© 2018 Wiley Periodicals, Inc.)

The aim of this study was to investigate the mechanical performance and the fracture behavior of endocrown restorations prepared using distinct restorative materials. A total of 42 sound molars with similar crown size and shape were cut at 2 mm above the cementoenamel junction and endodontically treated. They were categorized according to the restorative material used to fabricate endocrown restorations (n=7), namely, conventional composite (Filtek™ Z350 XT), bulk fill composite (Filtek™ Bulk Fill), conventional composite modeled using resin adhesives (SBMP: Scotchbond™ Multipurpose Adhesive; or SBU: Scotchbond™ Universal Adhesive), and IPS e.max lithium disilicate (Ivoclar Vivadent; positive control). Unprepared sound teeth were used as negative control. All endocrowns were bonded using a self-adhesive cement (Rely-X™ U200). The teeth were submitted to fatigue (Byocycle) and fracture (EMIC DL500) testing. Load-to-fracture (in N) and work-of-fracture (Wf, in J/m2) values were analyzed by ANOVA (p < 0.05). The endocrowns did not fracture or de-bond upon fatigue, showing similar load-to-fracture and work-of-fracture values, regardless of the restorative material (p > 0.05). The endocrowns fabricated by combining Z350 and SBMP had the least harsh fractures, in contrast to endocrowns prepared using Z350 only, which exhibited an equilibrium between repairable and irrepairable fractures. The e.max endocrowns exhibited more aggressive failures (root fracture) than other groups, resulting in higher rates of irrepairable fractures. In conclusion, dental practitioners may satisfactorily restore severely damaged nonvital teeth using the endocrown technique. Composite endocrowns prepared using resin adhesive as modeler liquid or using bulk fill material may result in less aggressive failures, thus providing a new material perspective for endocrown restorations.

Objective: To investigate the effect of dental trauma educational intervention among undergraduate students of a Federal University in Brazil., Materials and Methods: Students ( n = 125) enrolled in the dentistry ( n = 70), nursing ( n = 33), and speech therapy ( n = 22) courses were invited to attend a dental trauma lecture and also to answer a questionnaire about their confidence in managing crown fracture and tooth avulsion, before (T0) and immediately after (T1) the lecture. McNemar's test ( P < 0.05) with logistic regression compared the answers between the courses., Results: Female gender (78.4%) aged from 18 to 22 years (73.6%) predominated among all the participants. Dentistry students scored higher correct answers (54.3%) in T0 when compared to nursing (12%) and speech therapy (9%) students, concerning the storage medium for tooth fragment transportation. Likewise, few dentistry students (22.9%) and no nursing and speech therapy students knew about the ideal storage medium for an avulsed tooth when immediate replantation was unviable. After educational intervention, a significant improvement was found between T0 and T1 ( P < 0.001) for all courses, mainly regarding tooth avulsion with almost 100% of correct answers. Furthermore, logistic regression demonstrated that dentistry students had three times more knowledge absorption than nursing and speech therapy ones., Conclusions: The educational intervention demonstrated a significant positive impact regarding the knowledge of dental trauma emergency management among health students. Accordingly, it is essential to spread this information among health professionals to save teeth, especially in cases of avulsion., Competing Interests: There are no conflicts of interest.

Purpose: A systematic review was conducted to determine whether there were any alternative technique or additional step strategies available to reduce and control polymerization shrinkage stress development in dental resin-based restorative materials., Data Sources: This report followed the PRISMA Statement. A total of 36 studies were included in this review. Two reviewers performed a literature search up to December 2016, without restriction of the year of publication, in seven databases: PubMed, Web of Science, Scopus, SciELO, LILACS, IBECS, and BBO., Study Selection: Only in vitro studies that evaluated polymerization shrinkage stress by direct testing were included. Pilot studies, reviews and in vitro studies that evaluated polymerization shrinkage stress by indirect methods (e.g., microleakage or cuspal deflection measurements), finite elemental analysis or mathematical models were excluded. Of the 6.113 eligible articles, 36 studies were included in the qualitative analysis, and the meta-analysis was performed with 25 studies. A global comparison was performed with random-effects models (α = 0.05). The strategies were subdivided as follows: the use of an alternative technique protocol of placing the material inside the tooth cavity; the modification of the irradiation intensity or total energy delivered to the material; the use of an alternative light-curing source; or the use of an alternative photo-activation mode. All alternative strategies showed statistically significant differences when compared with their respective controls (p < 0.05)., Conclusion: The use of alternative light-curing sources contributed more to minimizing stress development than placing the material by means of an alternative technique protocol or by modifying the irradiant intensity or total energy delivered to the material during photo-activation. Moreover, the use of an alternative photo-activation mode (intermittent light, exponential, soft-start or pulse delay modes) was shown to be an effective strategy for reducing and controlling stress development in resin-based dental materials., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Purpose: A systematic review was conducted to determine whether there were composition strategies available to reduce and control polymerization shrinkage stress development in resin-based restorative dental materials., Data Sources: This report was reported in accordance with the PRISMA Statement. Two reviewers performed a literature search up to December 2016, without restriction of the year of publication, in seven databases: PubMed, Web of Science, Scopus, SciELO, LILACS, IBECS, and BBO., Study Selection: Only laboratory studies that evaluated polymerization shrinkage stress by direct testing were included. Pilot studies, reviews and in vitro studies that evaluated polymerization shrinkage stress by indirect methods (e.g., microleakage or cuspal deflection measurements), finite elemental analysis, or theoretical and mathematical models were excluded. Of the 6113 eligible articles, 62 studies were included in the qualitative analysis, and the meta-analysis was performed with 58 studies. The composition strategy was subdivided according to the modified part of the material: filler phase, coupling agent, or resin matrix. A global comparison was performed with random-effects models (α = 0.05). The only subgroup that did not show a statistical difference between the alternative strategy and the control was 'the use of alternative photo-initiators' (p = 0.29)., Conclusion: Modification of the resin matrix made the largest contribution to minimizing stress development. The technology used for decreasing stress in the formulation of low-shrinkage and bulk-fill materials was shown to be a promising application for reducing and controlling stress development., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Tooth bleaching is considered a non-invasive treatment, although the use of highly-concentrated products may provoke increased surface roughness and enamel demineralization, as well as postoperative sensitivity. Thus, the aim of this study was to investigate whether hydrogen peroxide (H 2 O 2 ) concentration would affect tooth bleaching effectiveness and the enamel surface properties. Enamel/dentin bovine specimens (6 × 4 mm) were immersed in coffee solution for 7 days and evaluated with a spectrophotometer (Easyshade; baseline), using the CIEL * a * b * color parameters. Hardness was measured using a hardness tester. The specimens were randomly assigned into four groups: one negative control, in which the specimens were not bleached, but they were irradiated with a laser-light source (Whitening Lase II, DMC Equipments); and three groups using distinct H 2 O 2 concentration, namely LP15% (15% Lase Peroxide Lite), LP25% (25% Lase Peroxide Sensy), and LP35% (35% Lase Peroxide Sensy), all products from DMC. The bleached specimens were also irradiated with the laser-light source. After bleaching, all specimens were evaluated using scanning electron microscopy (SEM). pH kinetics and rate was monitored during bleaching. The data were analyzed using ANOVA and Tukey's test (p < 0.05). All bleaching gels produced similar color change (p > 0.05). Concerning hardness, only the LP25% and LP35% significantly reduced hardness after bleaching; also, there was a progressive tendency for a greater percentage reduction in hardness with increased H 2 O 2 concentration of the gel (R 2  = 0.9973, p < 0.001). SEM showed that LP25% and LP35% produced an etching pattern on enamel with prism rods exposure. In conclusion, H 2 O 2 concentration above the 15% level does not increase bleaching effectiveness, and may increase the possibility for alteration of enamel hardness, surface morphology, and acidity of the medium. When using H 2 O 2 -based bleaching agents, dental practitioners should choose for less concentrated gels, e.g., around the 15% level., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

The aim of this study was to synthesize and evaluate physicochemical properties of a new salicylate derivative in experimental calcium-based root canal sealers. Two salicylate derivatives were synthesized for the transesterification reaction of methyl salicylate with two different alcohols (1,3-butylenoglicol disalicylate-BD and pentaerythritol tetrasalicylate -PT) in molar ratio 1:3 and 1:6, respectively. The products (BD and PT), were characterized by Fourier Transform Infrared Spectroscopy (FTIR) and Nuclear Magnetic Resonance spectroscopy (RMN). Calcium-based experimental sealers were prepared with the same catalyst paste (60% of MTA, 39% of n-ethyl-o-toluenesulfonamide, and 1% titanium dioxide) and four different concentrations of BD and PT in the base pastes (40/0 - control, 35/5, 30/10 and 20/20) with 60% of bismuth oxide. The experimental sealers were evaluated for setting time, solubility (24 h, 7, 14 and 30 days), diametral tensile strength and Young's Modulus. Data were analyzed by one- or two-way ANOVA with Tukey's test (p<0.05). The addition of PT reduced the materials setting time. After 24 h the sealer 40/0 and 35/5 had higher solubility, and after 14 and 28 days the sealer 20/20 showed the lowest solubility (p<0.05). After 7 days the sealer 20/20 stabilized its solubility. The sealer 40/0 presented the highest values and the 20/20 presented the lowest values of diametral tensile strength and Young's modulus (p<0.05). The addition of PT to calcium-based root canal sealers provides benefits to the setting time and solubility.

This study investigated the antimicrobial and osteogenic properties of titanium (Ti) disks superficially modified with tetracycline (TCH)-incorporated polymer nanofibers. The experiments were carried out in two phases. The first phase dealt with the synthesis and characterization (i.e., morphology, mechanical strength, drug release, antimicrobial activity, and cytocompatibility) of TCH-incorporated fibers. The second phase was dedicated to evaluating both the antimicrobial and murine-derived osteoprecursor cell (MC3T3-E1) response of Ti-modified with TCH-incorporated fibers. TCH was successfully incorporated into the submicron-sized and cytocompatible fibers. All TCH-incorporated mats presented significant antimicrobial activity against periodontal pathogens. The antimicrobial potential of the TCH-incorporated fibers-modified Ti was influenced by both the TCH concentration and bacteria tested. At days 5 and 7, a significant increase in MC3T3-E1 cell number was observed for TCH-incorporated nanofibers-modified Ti disks when compared to that of TCH-free nanofibers-modified Ti-disks and bare Ti. A significant increase in alkaline phosphatase (ALP) levels on the Ti disks modified with TCH-incorporated nanofiber on days 7 and 14 was seen, suggesting that the proposed surface promotes early osteogenic differentiation. Collectively, the data suggest that TCH-incorporated nanofibers could function as an antimicrobial surface modifier and osteogenic inducer for Ti dental implants. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 2085-2092, 2017., (© 2016 Wiley Periodicals, Inc.)

Purpose of Review: To present an overview on the main agents (i.e., biomolecules and nanocompounds) and/or strategies currently available to amplify or stabilize resin-dentin bonding., Recent Findings: According to studies retrieved for full text reading (2014-2017), there are currently six major strategies available to overcome resin-dentin bond degradation: (i) use of collagen crosslinking agents, which may form stable covalent bonds with collagen fibrils, thus strengthening the hybrid layer; (ii) use of antioxidants, which may allow further polymerization reactions over time; (iii) use of protease inhibitors, which may inhibit or inactivate metalloproteinases; (iv) modification of the bonding procedure, which may be performed by using the ethanol wet-bonding technique or by applying an additional adhesive (hydrophobic) coating, thereby strengthening the hybrid layer; (v) laser treatment of the substrate prior to bonding, which may cause specific topographic changes in the surface of dental substrates, increasing bonding efficacy; and (vi) reinforcement of the resin matrix with inorganic fillers and/or remineralizing agents, which may positively enhance physico-mechanical properties of the hybrid layer., Summary: With the present review, we contributed to the better understanding of adhesion concepts and mechanisms of resin-dentin bond degradation, showing the current prospects available to solve that problematic. Also, adhesively-bonded restorations may be benefited by the use of some biomolecules, nanocompounds or alternative bonding strategies in order to minimize bond strength degradation., Competing Interests: Conflict of Interest The authors declare that they have no conflict of interest.

The aim of this study is to evaluate the influence of modeling liquids on the translucency and color shade of resin composites (RCs) after one year of storage. RC specimens were prepared using either a conventional insertion technique (control; without modeling liquid) or a restorative dental modeling insertion technique (RDMIT) with dental adhesives as modeling liquids (Scotchbond™ Multi-Purpose [SBMP; 3M ESPE] or Adper™ Single Bond 2 [SB; 3M ESPE]). The initial colors of the specimens were obtained with a digital spectrophotometer and the CIEL*a*b* color system, after which specimens were stored (37°C) in distilled water or red wine for 12 months. Color measurements were reassessed after 6 and 12 months of storage, and scanning electron microscopy was performed after 12 months. Translucency and color change (ΔE*) were calculated and analyzed using ANOVA and Tukey's test (α = 5%). RC samples prepared via RDMIT showed a translucency similar to that of control samples. ΔE* was also less intense for RCs containing SBMP than for RCs containing SB. Specimens stored in wine showed a clear pattern of degradation, especially in the control group, and surface degradation seemed to be less intense for specimens prepared with SBMP and SB than for specimens without. Specimens stored in water did not show clear evidence of surface degradation. RDMIT appears to be an interesting approach to reduce ΔE* in RCs over time without negative effects on the translucency of the material. However, the modeling liquid should feature a hydrophobic composition, similar to that used in the SBMP group, the achieve the best results.

The purpose of this investigation was to determine the ability of tetracycline-containing fibers to inhibit biofilm formation of peri-implantitis-associated pathogens [i.e., Porphyromonas gingivalis (Pg), Fusobacterium nucleatum (Fn), Prevotella intermedia (Pi), and Aggregatibacter actinomycetemcomitans (Aa)]. Tetracycline hydrochloride (TCH) was added to a poly(DL-lactide) [PLA], poly(ε-caprolactone) [PCL], and gelatin [GEL] polymer blend solution at distinct concentrations to obtain the following fibers: PLA:PCL/GEL (TCH-free, control), PLA:PCL/GEL + 5 % TCH, PLA:PCL/GEL + 10 % TCH, and PLA:PCL/GEL + 25 % TCH. The inhibitory effect of TCH-containing fibers on biofilm formation was assessed by colony-forming units (CFU/mL). Qualitative analysis of biofilm inhibition was done via scanning electron microscopy (SEM). Statistical significance was reported at p < 0.05. Complete inhibition of biofilm formation on the fibers was observed in groups containing TCH at 10 and 25 wt%. Fibers containing TCH at 5 wt% demonstrated complete inhibition of Aa biofilm. Even though a marked reduction in CFU/mL was observed with an increase in TCH concentration, Pi proved to be the most resilient microorganism. SEM images revealed the absence of or a notable decrease in bacterial biofilm on the TCH-containing nanofibers. Collectively, our data suggest that tetracycline-containing fibers hold great potential as an antibacterial dental implant coating.

Purpose: To evaluate the effects of simulated gastric juice on CAD/CAM resin composites by means of morphological and mechanical (i.e., hardness) evaluations., Materials and Methods: Fourteen specimens of each resin composite (Lava Ultimate and Paradigm MZ100) were prepared according to the manufacturer's instructions. They were submitted to erosive challenges in a simulated gastric juice (pH = 1.2) solution for 6 and 24 hours. Vickers microhardness and surface roughness (R a , R q ) evaluations were taken before (baseline) and after acid exposure. Morphological analysis was obtained using scanning electron microscopy (SEM). Statistical analysis was performed using two-way repeated measures ANOVA and Student-Newman-Keuls's test (α = 0.05)., Results: Paradigm MZ100 demonstrated higher microhardness than Lava Ultimate regardless of the storage time period (p ≤ 0.001), and microhardness was not affected by the acidic challenge (p = 0.58). After 6 hours of acid exposure, a significant decrease in R a and R q was seen for Paradigm MZ100 when compared to the baseline (R a p = 0.032; R q p = 0.013); however, for Lava Ultimate only Rq decreased (p = 0.021), while R a remained unchanged (p = 0.38). After 24 hours of acid exposure, while Paradigm MZ100 exhibited no additional changes in surface roughness (p ≥ 0.75), Lava Ultimate became rougher (R a p = 0.041; R q p = 0.014), as confirmed by SEM imaging., Conclusions: The acidic scenario tested in the present study changed the surface roughness of the resin composites but not their Vickers microhardness. Moreover, both resin composites seem suitable for use under acidic scenarios, although Paradigm MZ100 showed enhanced stability compared to Lava Ultimate., (© 2015 by the American College of Prosthodontists.)

Objectives: This study aims to synthesize and characterize biodegradable polymer-based matrices loaded with CaO nanoparticles for osteomyelitis treatment and bone tissue engineering., Materials and Methods: Poly(ε-caprolactone) (PCL) and PCL/gelatin (1:1, w/w) solutions containing CaO nanoparticles were electrospun into fibrous matrices. Scanning (SEM) and transmission (TEM) electron microscopy, Fourier transformed infrared (FTIR), energy dispersive X-ray spectroscopy (EDS), contact angle (CA), tensile testing, and antibacterial activity (agar diffusion assay) against Staphylococcus aureus were performed. Osteoprecursor cell (MC3T3-E1) response (i.e., viability and alkaline phosphatase expression/ALP) and infiltration into the matrices were evaluated., Results: CaO nanoparticles were successfully incorporated into the fibers, with the median fiber diameter decreasing after CaO incorporation. The CA decreased with the addition of CaO, and the presence of gelatin made the matrix very hydrophilic (CA = 0°). Increasing CaO concentrations progressively reduced the mechanical properties (p ≤ 0.030). CaO-loaded matrices did not display consistent antibacterial activity. MC3T3-E1 cell viability demonstrated the highest levels for CaO-loaded matrices containing gelatin after 7 days in culture. An increased ALP expression was consistently seen for PCL/CaO matrices when compared to PCL and gelatin-containing counterparts., Conclusions: Despite inconsistent antibacterial activity, CaO nanoparticles can be effectively loaded into PCL or PCL/gelatin fibers without negatively affecting the overall performance of the matrices. More importantly, CaO incorporation enhanced cell viability as well as differentiation capacity, as demonstrated by an increased ALP expression., Clinical Significance: CaO-loaded electrospun matrices show potential for applications in bone tissue engineering., Competing Interests: The authors declare that they have no conflict of interest.

Objectives: The aims of the study are to prepare novel stain removal gel-based formulations containing papain or bromelain and to investigate their stain removal effect when applied to enamel., Materials and Methods: Experimental bromelain- and papain-based stain removal gels were prepared. Next, enamel/dentin tooth samples (6 × 6 mm 2 , 4 mm in thickness) were obtained from bovine teeth, stained in coffee solution for 1 week, and measured with a digital spectrophotometer (Easyshade, Vita Zahnfabrik) for color assessment (baseline). The samples were then randomly allocated into four groups (n = 7), according to the stain removal agent applied: ContrastPM+ (Discus Dental, LLC), which is based on 20 wt.% carbamide peroxide (positive control); bromelain-based; papain-based; and no agent (negative control). The materials were applied once a week, three times per day, during 4 weeks, and following the directions of use from positive control. The samples were measured again with the Easyshade and using the CIEL * a * b * color system. The color change (ΔE * ) results were obtained by subtracting the baseline values from the final color values obtained at each time point. The data were statistically analyzed using two-way repeated-measures analysis of variance and Student Newman Keuls's test as a post hoc test (α = 5 %)., Results: All stain removal agents produced greater color change than the negative control (p < .001), with the positive control demonstrating greater ΔE * values when compared to the experimental gels (p ≤ .004). The second application of all gels resulted in greater ΔE * values compared to the first application (p ≤ .025), although no color change was observed after the third application (p ≥ .051), regardless of the material evaluated., Clinical Significance: The proposed gels containing proteolytic enzymes (bromelain or papain) of vegetal origin may hold significant clinical potential as active agents for the preparation of stain removal agents free of hydrogen/carbamide peroxide.

Objectives: A systematic review was conducted to evaluate clinical (survival) and in vitro (fracture strength) studies of endocrown restorations compared to conventional treatments (intraradicular posts, direct composite resin, inlay/onlay)., Data: This report followed the PRISMA Statement. A total of 8 studies were included in this review., Sources: Two reviewers performed a literature search up to February 2016 in seven databases: PubMed, Web of Science, Scopus, BBO, SciELO, LILACS and IBECS., Study Selection: Only clinical trials and in vitro studies that evaluated endocrowns were included. Case reports, case series, pilot studies, reviews and in vitro studies that evaluated properties other than fracture strength of endocrowns were excluded. From the 103 eligible articles, 8 remained in the qualitative analysis (3 clinical trials and 5 in vitro studies), and the meta-analysis was performed for the 5 in vitro studies. A global comparison was performed with random-effects models at a significance level of p<0.05., Results: Clinical trials showed a success rate of endocrowns varying from 94 to 100%. The global analysis in posterior and anterior teeth demonstrated that endocrowns had higher fracture strength than conventional treatments (p=0.03). However, when comparing endocrowns to conventional treatments only in posterior teeth (subgroup analyses), no statistically significant differences were found between treatments (p=0.07; I(2)=62%)., Conclusion: The literature suggests that endocrowns may perform similarly or better than the conventional treatments using intraradicular posts, direct composite resin or inlay/onlay restorations., Clinical Significance: Although further studies are still necessary to confirm the present findings, endocrowns show potential application for the rehabilitation of severely compromised, endodontically treated teeth., (Copyright © 2016 Elsevier Ltd. All rights reserved.)