Search

Dendroprovenancing provides critical information regarding the origin of wood, allowing further insights into economic exploitation strategies and source regions of timber products. Traditionally, dendroprovenancing relies on pattern-matching of tree rings, but its spatial resolution is limited by the geographical coverage of species-specific chronologies available for crossdating and, in the case of short-distance trades, by scarce environmental variability. Here, we present an approach to provenance timber with high spatial resolution from forested areas that have been exploited intensively throughout history, with the aim to understand the sustainability of the various woodland management practices used to supply timber products. To this end, we combined tree-ring width (TRW), wood anatomical and geochemical analyses in addition to multivariate statistical validation procedures to trace the origin of living oak trees (Quercus robur) sampled in four stands located within a 30-km radius around the city of Limoges (Haute-Vienne, France). We demonstrate that TRW and wood anatomical variables (and in particular cell density) robustly discriminate the eastern from the western site, while failing to trace the origin of trees from the northern and southern sites. Here, strontium isotopic ratios ( 87 Sr/ 86 Sr) and Ca concentrations identify clusters of trees which could not be identified with TRW or wood anatomy. Ultimately, our study demonstrates that the coupling of wood anatomy with geochemical signatures allows to correctly pinpoint the origin of trees. Given the small geographic scale of our study and the limited differences in elevation and climate between study sites, our results are particularly promising for future dendroprovenancing studies. We thus conclude that the combination of multiple approaches will not only increase the accuracy of dendroprovenancing studies at local scales, but could also be implemented at much larger scales to identify trends in historic timber supply throughout Europe., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Sandrine Paradis-Grenouillet reports financial support was provided by Service Régional de l'Archéologie (Limoges, France). Sandrine Paradis-Grenouillet reports financial support was provided by City of Limoges., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Long-term records of tree-ring width (TRW), latewood maximum density (MXD) and blue intensity (BI) measurements on conifers have been largely used to develop high-resolution temperature reconstructions in cool temperate forests. However, the potential of latewood blue intensity (LWBI), less commonly used earlywood blue intensity (EWBI), and delta (difference between EWBI and LWBI, dBI) blue intensity in Mediterranean tree species is still unexplored. Here we developed BI chronologies in moist-elevation limits of the most southwestern European distribution of Pinus nigra subsp. salzmanii Arnold. We tested whether BI variables derived from tree rings of black pine are better proxies than ring-width variables to reconstruct long-term changes in climatic factors and water availability. For this we applied correlations and regression analyses with daily and monthly climate data, a spatial and temporal drought index (Standardized Precipitation-Evapotranspiration Index-SPEI) and Vapour Pressure Deficit (VPD), as well as atmospheric circulation patterns: North Atlantic Oscillation (NAO), Southern Oscillation Index (SOI) and Western Mediterranean Oscillation (WeMO). We found a positive relation between black pine growth (RW) and temperature during the winter preceding the growing season. Among all variables LWBI and dBI were found to be more sensitive than TRW to SPEI at low-elevation site, with EWBI series containing an opposite climatic signal. LWBI and dBI were significantly related to June and September precipitation at high-elevation site. Winter VPD was related with higher EWI and LWI series, whereas dBI and EWBI were related with January SOI and February NAO. We confirm the potential of long-term dBI series to reconstruct climate in drought-prone regions. This novel study in combination with other wood anatomical measurements has wide implications for further use of BI to understand and reconstruct environmental changes in Mediterranean conifer forests., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 The Authors. Published by Elsevier B.V. All rights reserved.)

Ocean-going ships were key to rising maritime economies of the Early Modern period, and understanding how they were built is critical to grasp the challenges faced by shipwrights and merchant seafarers. Shipwreck timbers hold material evidence of the dynamic interplay of wood supplies, craftmanship, and evolving ship designs that helped shape the Early Modern world. Here we present the results of dendroarchaeological research carried out on Batavia's wreck timbers, currently on display at the Western Australian Shipwrecks Museum in Fremantle. Built in Amsterdam in 1628 CE and wrecked on its maiden voyage in June 1629 CE in Western Australian waters, Batavia epitomises Dutch East India Company (Verenigde Oostindische Compagnie, or VOC) shipbuilding. In the 17th century, the VOC grew to become the first multinational trading enterprise, prompting the rise of the stock market and modern capitalism. Oak (Quercus sp.) was the preferred material for shipbuilding in northern and western Europe, and maritime nations struggled to ensure sufficient supplies to meet their needs and sustain their ever-growing mercantile fleets and networks. Our research illustrates the compatibility of dendrochronological studies with musealisation of shipwreck assemblages, and the results demonstrate that the VOC successfully coped with timber shortages in the early 17th century through diversification of timber sources (mainly Baltic region, Lübeck hinterland in northern Germany, and Lower Saxony in northwest Germany), allocation of sourcing regions to specific timber products (hull planks from the Baltic and Lübeck, framing elements from Lower Saxony), and skillful woodworking craftmanship (sapwood was removed from all timber elements). These strategies, combined with an innovative hull design and the use of wind-powered sawmills, allowed the Dutch to produce unprecedented numbers of ocean-going ships for long-distance voyaging and interregional trade in Asia, proving key to their success in 17th-century world trade., Competing Interests: The authors have declared that no competing interests exist.

Dating the wood from historical art objects is a crucial step to ascertain their production time, and support or refute attribution to an artist or a workshop. Dendrochronology is commonly used for this purpose but requires access to the tree-ring pattern in the wood, which can be hindered by preparatory layers, polychromy, wax, or integrated frames. Here we implemented non-invasive dendrochronology based on X-ray computed tomography (CT) to examine a painting on panel attributed to Rubens' studio and its presumed dating around 1636 CE. The CT images achieved a resolution of 37.3 micron and revealed a double panelling, which was concealed by oak strips covering all four edges. The back (visible) board is made of deciduous oak (Quercus subg. Quercus), the most common type of wood used in 17th-century Netherlandish workshops, and was dated terminus post quem after 1557 CE. However, the front (original) board used for the painting has been identified through examination of the wood anatomy as a tropical wood, probably Swietenia sp., a species seldom used in Netherlandish paintings, and remains undated. Its very presence attests the global character of 17th-century trade, and demonstrates the use of exotic species in Flemish studios. The date of the oak board refutes previous results and suggests that this board was trimmed to meet the size of the tropical one, having been glued to it for conservation purposes or with deceiving intentions to pretend that the painting was made on an oak panel. These revelations have opened new lines of art historical inquiry and highlight the potential of X-ray CT as a powerful tool for non-invasive study of historical art objects to retrieve their full history., Competing Interests: The authors have read the journal’s policy and have the following competing interests: The FleX-ray Laboratory at the CWI was established in collaboration between CWI, TESCAN-XRE NV, Nikhef, and Amsterdam Scientific Instruments (ASI). There are no patents, products in development or marketed products associated with this research to declare. This does not alter our adherence to PLOS ONE policies on sharing data and materials.

Dendrochronology is an essential tool to determine the date and provenance of wood from historical art objects. As standard methods to access the tree rings are invasive, X-ray computed tomography (CT) has been proposed for non-invasive dendrochronological investigation. While traditional CT can provide clear images of the inner structure of wooden objects, it requires their full rotation, imposing strong limitations on the size of the object. These limitations have previously encouraged investigations into alternative acquisition trajectories, including trajectories with only linear movement. In this paper, we use such a line-trajectory (LT) X-ray tomography technique to retrieve tree-ring patterns from large wooden objects. We demonstrate that by moving a wooden artifact sideways between the static X-ray source and the detector during acquisition, sharp reconstruction images of the tree rings can be produced. We validate this technique using computer simulations and two wooden test planks, and demonstrate it on a large iconic chest from the Rijksmuseum collection (Amsterdam, The Netherlands). The LT scanning method can be easily implemented in standard X-ray imaging units available at museum research facilities. Therefore, this scanning technique represents a major step towards the standard implementation of non-invasive dendrochronology on large wooden cultural heritage objects.

Assessing the impact of future climate change on North Atlantic tropical cyclone (TC) activity is of crucial societal importance, but the limited quantity and quality of observational records interferes with the skill of future TC projections. In particular, North Atlantic TC response to radiative forcing is poorly understood and creates the dominant source of uncertainty for twenty-first-century projections. Here, we study TC variability in the Caribbean during the Maunder Minimum (MM; 1645-1715 CE), a period defined by the most severe reduction in solar irradiance in documented history (1610-present). For this purpose, we combine a documentary time series of Spanish shipwrecks in the Caribbean (1495-1825 CE) with a tree-growth suppression chronology from the Florida Keys (1707-2009 CE). We find a 75% reduction in decadal-scale Caribbean TC activity during the MM, which suggests modulation of the influence of reduced solar irradiance by the cumulative effect of cool North Atlantic sea surface temperatures, El Niño-like conditions, and a negative phase of the North Atlantic Oscillation. Our results emphasize the need to enhance our understanding of the response of these oceanic and atmospheric circulation patterns to radiative forcing and climate change to improve the skill of future TC projections.