Search

Developing an efficient heterogeneous photocatalyst for environmental remediation and treatment strategies using visible light harvesting processes is promising but challenging. Herein, Cd 1-x Cu x S materials have been synthesized and characterized by precise analytical tools. Cd 1-x Cu x S materials exhibited excellent photocatalytic activity for direct Red 23 (DR-23) dye degradation in visible light irradiation. The operational parameters, like dopant concentration, photocatalyst dose, pH, and initial concentration of dye were investigated during the process. The photocatalytic degradation process follows pseudo-first-order kinetics. As compared to other tested materials, 5% Cu doped CdS material revealed superior photocatalytic performance for the degradation of DR-23 (k = 13.96 × 10 -3 min -1 ). Transient absorption spectroscopy, EIS, PL, and transient photocurrent indicated that adding copper to the CdS matrix improved the separation of photo-generated charge carriers by lowering the recombination rate. Spin-trapping experiments recognized the photodegradation primarily based on secondary redox products, i.e., hydroxyl and superoxide radicals. According to by Mott-Schottky curves, photocatalytic mechanism and photo-generated charge carrier density were elucidated regarding dopant-induced valence and conduction bands shifting. Thermodynamic probability of radical formation in line with the altered redox potentials by Cu doping has been discussed in the mechanism. The identification of intermediates by mass spectrometry study also showed a plausible breakdown mechanism for DR-23. Moreover, samples treated with nanophotocatalyst displayed excellent results when tested for water quality metrics such as DO, TDS, BOD, and COD. Developed nanophotocatalyst shows high recyclability with superior heterogeneous nature. 5% Cu-doped CdS also exhibit strong photocatalytic activity for the degradation of colourless pollutant bisphenol A (BPA) under visible light (k = 8.45 × 10 -3 min -1 ). The results of this study offer exciting opportunities to alter semiconductors' electronic band structures for visible-light-induced photocatalytic activity for wastewater treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Sulfide-based solid-state lithium-ion batteries (SSLIB) have attracted a lot of interest globally in the past few years for their high safety and high energy density over the traditional lithium-ion batteries. However, sulfide electrolytes (SEs) are moisture-sensitive which pose significant challenges in the material preparation and cell manufacturing. To the best of our knowledge, there is no tool available to probe the types and the strength of the basic sites in sulfide electrolytes, which is crucial for understanding the moisture stability of sulfide electrolytes. Herein, we propose a new spectral probe with the Lewis base indicator BBr 3 to probe the strength of Lewis basic sites on various sulfide electrolytes by 11 B solid-state NMR spectroscopy ( 11 B-NMR). The active sulfur sites and the corresponding strength of the sulfide electrolytes are successfully evaluated by the proposed Lewis base probe. The probed strength of the active sulfur sites of a sulfide electrolyte is consistent with the results of DFT (density functional theory) calculation and correlated with the H 2 S generation rate when the electrolyte was exposed in moisture atmosphere. This work paves a new way to investigate the basicity and moisture stability of the sulfide electrolytes., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

In this study, we demonstrated the synthesis of potassium chloride (KCl)-incorporated graphitic carbon nitride, (g-C 3 N 4 , CN) with varying amounts of N-vacancies and pyridinic-N as well as enhanced Lewis basicity, via a single-step thermal polymerization by tailoring the precursors of melamine and urea for carbon oxide (CO 2 ) capture. Melamine, as a precursor, undergoes a phase transformation into melam and triazine-rich g-C 3 N 4 , whereas the addition of urea polymerizes the mixture to form melem and heptazine-rich g-C 3 N 4 (CN11). Owing to the abundance of pyridinic-N and the high surface area, CN11 adsorbed higher amounts of CO 2 (44.52 μmol m -2 at 25 °C and 1 bar of CO 2 ) than those reported for other template-free carbon materials. Spectroscopic analysis revealed that the enhanced CO 2 adsorption is due to the presence of pyridinic-N and Lewis basic sites on the surface. The intermediates of CO 2 adsorption, including carbonate and bicarbonate species, attached to the CN samples were identified using in-situ Fourier-transform infrared spectroscopy (FTIR). This work provides insights into the mechanism of CO 2 adsorption by comparing the structural features of the synthesized KCl-incorporated g-C 3 N 4 samples . CN11, with an excellent CO 2 uptake capacity, is viewed as a promising candidate for CO 2 capture and storage., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Despite the modern boost, developing a new photocatalytic system for the reduction of aldehydes is still challenging due to their high negative reduction potential. Herein, we have used a metal-free photoinduced electron-transfer system based on a cheap and readily available organic dye eosin Y (EY), graphene oxide (GO), and ammonium oxalate (AO) for photocatalytic reduction of structurally diverse aldehydes under sustainable conditions. The protocol shows remarkable selectivity for the photocatalytic reduction of aldehydes over ketones. The decisive interaction of GO and AO with the various states of EY (ground, singlet, triplet, and radical anions), which are responsible for the commencement of the reaction, was examined by various theoretical, optical, electrochemical, and photo-electrochemical studies. The synergetic system of GO, EY, and AO is appropriate for enhancing the separation efficiency of visible-light-induced charge carriers. GO nanosheets act as an electron reservoir to accept and transport photogenerated electrons from the photocatalytic system to the reactant. The reduction of the GO during the process ruled out the back transfer of photoexcited charges. Control experiments explained that the reaction involves two stages: electron transfer and protonation. This process eliminates the necessity of precious-metal-based photocatalysts or detrimental sacrificial agents and overcomes the redox potential limitations for the photoreduction of aldehydes.

Hydrogen production through the use of renewable raw materials and renewable energy is crucial for advancing its applications as an energy carrier. In this study, we fabricated a solid oxide solution of Cu and Ni within a confined pore space, followed by a partial reduction, to produce a highly efficient catalyst for ethanol steam reforming (ESR). At 300 °C, EtOH is completely converted, a H2 yield of approximately 5 mol per mol is achieved, and CO2 is the main carbon-containing product. This demonstrates that H2 production from bioethanol is an efficient and sustainable approach. Such a highly efficient ESR catalyst is attributed to the ability of the metal-oxide interface to facilitate the transformation of CHx adspecies from acetaldehyde decomposition into methoxy-like adspecies, which are reformed readily to produce H2 and consequently reduce CH4 formation., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Value proposition: Global warming and climate change urge the chemical industry to develop new processes, in which sustainability is a necessity and requirement. Catalysis is recognized to be one of the key technologies in enabling sustainability. This special issue, assembled by guest editors Soofing Chen and Shawn D. Lin, highlights some of the best work presented at "The 6th Asia-Pacific Congress on Catalysis (APCAT-6)", with as major theme "New Era of Catalysis: Efficiency, Value, and Sustainability"., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The light irradiation parameters, including the wavelength spectrum and intensity of light source, can significantly influence a photocatalytic reaction. This study examines the propylene photo-epoxidation over V-Ti/MCM-41 photocatalyst by using artificial sunlight (Xe lamp with/without an Air Mass 1.5 Global Filter at 1.6/18.5 mW·cm(-2)) and ultraviolet light (Mercury Arc lamp with different filters in the range of 0.1-0.8 mW·cm(-2)). This is the first report of using artificial sunlight to drive the photo-epoxidation of propylene. Over V-Ti/MCM-41 photocatalyst, the propylene oxide (PO) formation rate is 193.0 and 112.1 µmol·gcat (-1)·h(-1) with a PO selectivity of 35.0 and 53.7% under UV light and artificial sunlight, respectively. A normalized light utilization (NLU) index is defined and found to correlate well with the rate of both PO formation and C3H6 consumption in log-log scale. The light utilization with a mercury arc lamp is better than with a xenon lamp. The selectivity to PO remains practically unchanged with respect to NLU, suggesting that the photo-epoxidation occurs through the same mechanism under the conditions tested in this study.

The catalytic performances of supported gold nanoparticles depend critically on the nature of support. Here, we report the first evidence of strong metal-support interactions (SMSI) between gold nanoparticles and ZnO nanorods based on results of structural and spectroscopic characterization. The catalyst shows encapsulation of gold nanoparticles by ZnO and the electron transfer between gold and the support. Detailed characterizations of the interaction between Au nanoparticles and ZnO were done with transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), electron paramagnetic resonance (EPR), and FTIR study of adsorbed CO. The significance of the SMSI effect is further investigated by probing the efficiency of CO oxidation over the Au/ZnO-nanorod. In contrast to the classical reductive SMSI in the TiO(2) supported group VIII metals which appears after high temperature reduction in H(2) with electron transfer from the support to metals, the oxidative SMSI in Au/ZnO-nanorod system gives oxygen-induced burial and electron transfer from gold to support. In CO oxidation, we found that the oxidative SMSI state is associated with positively charged gold nanoparticles with strong effect on its catalytic activity before and after encapsulation. The oxidative SMSI can be reversed by hydrogen treatment to induce AuZn alloy formation, de-encapsulation, and electron transfer from support to Au. Our discovery of the SMSI effects in Au/ZnO nanorods gives new understandings of the interaction between gold and support and provides new way to control the interaction between gold and the support as well as catalytic activity.

Platinum nanoparticles of 2-3 nm average size and ca. +/-2 nm distribution can be successfully prepared by methanol reduction while using sodium citrate as the stabilizer. Sol formation was investigated by UV-visible spectroscopy and EXAFS (extended X-ray absorption fine structure spectroscopy). The formation of Pt nanoparticles was confirmed by the presence of Pt-Pt bonding in the solution after a certain induction period in methanol-reduced sol with or without citrate. The possible two-step reduction of Pt(IV) was revealed by correlating EXAFS, UV-visible spectra and pH data. The presence of citrate resulted in a smaller Pt-Pt coordination number and a slower sol formation process. All these results prove that citrate acted as the stabilizer in this synthesis.

Platinum sols have been prepared by citrate reduction in the temperature range of 343-363 K. The Pt state in the solution was examined by EXAFS (extended X-ray absorption fine-structure spectroscopy). It did not show any PtPt bonding, a characteristic for reduced Pt sols. EXAFS model fitting further proved the presence of PtO with 4 oxygen neighbors, which suggests a tetraplanar coordination configuration. The possibility of neighboring Pt sharing oxygen ligand or the formation of PtO(x) is rejected by EXAFS model fitting. Citrate was found to be the most likely ligand to orient its oxygen end toward a charged Pt center. Thus we have revealed that the citrate treatment at this temperature range was clearly insufficient to reduce H2PtCl(6(aq)). Neither an extended period of reaction time nor an excess citrate reduced the Pt precursor. It is therefore highly recommended that the citrate sols should be carefully prepared and used.