Search

Graphene-based metamaterial sensors are of significant research value for detecting food preservatives at low concentrations due to their extremely high sensitivity levels. In this work, we proposed and experimentally demonstrated an anapole resonance-based graphene metasurface (An-graphene-Ms) sensor with its conductivity altered by electrostatic doping effects for detecting and differentiating between two preservatives, sodium benzoate and potassium sorbate, in the terahertz region. Sodium benzoate, owing to its benzene ring structure, established π - π stacking interactions between the π -electrons in the benzene ring and those in graphene, amplifying the sensing effect. The amplitude changes and phase differences of the An-graphene-Ms sensor for the sodium benzoate detection were greater than those for potassium sorbate at the same concentration. Additionally, to reveal the dependence of the resonance frequency on the time delay, the measured signals were investigated using the continuous wavelet transform (CWT), and the time-frequency combination of the metasurface sensor was performed. The 2D wavelet coefficient intensity cards are effectively constructed through CWT, which also presents a more accurate approach for distinguishing and determining the concentrations of the two preservatives., Competing Interests: Conflict of interest: Authors state no conflicts of interest., (© 2024 the author(s), published by De Gruyter, Berlin/Boston.)

A broadband and narrowband switchable terahertz (THz) absorber based on a bulk Dirac semimetal (BDS) and strontium titanate (STO) is proposed. Narrowband and broadband absorption can be switched by adjusting the Fermi level of the BDS. When the Fermi level of the BDS is 100 meV, the device is an absorber with three narrowband absorption peaks. The frequencies are 0.44, 0.86, and 1.96 THz, respectively, when the temperature of STO is 250 K. By adjusting the temperature of STO from 250 to 500 K, the blue shifts of the frequencies are approximately 0.14, 0.32, and 0.60 THz, respectively. The sensitivities of the three absorption peaks are 0.56, 1.27, and 2.38 GHz/K, respectively. When the Fermi level of the BDS is adjusted from 100 to 30 meV, the device can be switched to a broadband absorber with a bandwidth of 0.70 THz. By adjusting the temperature of STO from 250 to 500 K, the central frequency shifts from 1.40 to 1.79 THz, and the bandwidth broadens from 0.70 to 0.96 THz. The sensitivity of the central frequency is 1.57 GHz/K. The absorber also has a wide range of potential applications in multifunctional tunable devices, such as temperature sensors, stealth equipment, and filters.

In this study, a perfect metamaterial absorber based on strontium titanate and bulk Dirac semimetals is proposed. When the temperature of strontium titanate was 300K, the dual-band absorptions were 99.74% and 99.99% at 1.227 and 1.552 THz, respectively. The sensitivities based on a transverse magnetic (TM) wave were 0.95 and 1.22 GHz/K; the sensitivity based on a transverse electric (TE) wave was 0.76 GHz/K. The TE and TM waves were modulated by inserting a bulk Dirac semimetal between the concave and convex devices. The modulation depth of the TE wave was 97.9% at 1.1 THz; the extinction ratio was 16.9 dB. The modulation depth of the TE wave at 1.435 THz was 95.9%; the extinction ratio was 13.89 dB. The TM wave modulation depth at 1.552 THz was 95.9%; the extinction ratio was 13.98 dB. Irrespective of a TE or TM wave, the terahertz absorber has good switching and temperature-sensing performance based on strontium titanate and bulk Dirac semimetals as well as broad application prospects in temperature sensing and switching devices.

In this paper, a multifunctional terahertz (THz) absorber based on Dirac semimetal and vanadium dioxide ( V O 2 ) is proposed. By modulating the temperature of V O 2 , the absorber can be switched between the narrow band and wide band. When V O 2 is in the metallic state, the absorber has a broadband absorption effect with a bandwidth of approximately 4 THz. It has the advantages of insensitivity to polarization and wide-angle absorption. When V O 2 is in the insulating state, the absorber has two absorption peaks with absorptivity exceeding 90% and sensitivities of 297.7 and 402 GHz/RIU, and thus can be used as a highly sensitive sensor for cell detection. When the Fermi level of the Dirac semimetal is changed, the absorption characteristics can be modulated. The absorber has broad application prospects in multifunctional modulated devices.

Electromagnetic metasurface with many special electromagnetic properties can be utilized to manipulate electromagnetic wave propagation and reflection. If the metasurfaces were designed for coding, random, phase discontinuities, perfect absorber and so on，they can manipulate the scattering or the reflection of electromagnetic wave and achieve the reduction of the radar cross section(RCS). This paper mainly presents the recent progress concerning the reduction of RCS using non - directional scattering or the absorption characteristic in microwave and terahertz wave. The analysis results show that coding electromagnetic metasurface can disperse the reflection into a variety of direction by designing the specific coding sequences for different elements. The coding metasurface which are composed of different digital elements, and the reflection phase difference of these digital elements is constant in a wide frequency range, and higher bit coding metasurface can flexible manipulate electromagnetic wave. The random electromagnetic metasurface can achieve broadband phase shifter by adjusting the size parameters of array element, and can diffuse characteristic by scattering into random wave of the reflection peaks for metal target. Phase discontinuities metasurface can achieve anomalous or diffuse of wave because the phase distribution is not uniform at the surface. The absorber metasurfaces which are designed reasonably with the physical dimensions of the devices can reduce reflection by absorbing electromagnetic wave energy. So, the electromagnetic metasurfaces have a large potential application for radar stealth, broadband communications, imaging and so on. Finally, we discussed the future development of RCS reduction by using the electromagnetic metasurface. In order to satisfy the needs of practical application, the research of metasurface will continue development in broadband, flexible, large angle and other aspects.

In the present paper, the recent progress in terahertz metamaterials-based sensing is reviewed with the principle of metamaterial biosensor,metamaterial substrate, and structure design, respectively. The paper introduces the principle in detail, analyzes the sensitivity of the biosensor with the material and the thickness of the substrate and the structure of metamaterial. The analysis shows that we can enhance the sensitivity and resolution of biosensor by designing specific metamaterial structure, using low dielectric constant and low loss thin substrate, especially many materials have a specific response in the terahertz frequency. So, there is a large potential application for label-free sensing by using the terahertz metamaterials. This paper also presents the future development of THz metamaterial sensors.