Search

Background: While moderate-intensity statin therapy is recommended for primary prevention, statins may not be utilized at a recommended intensity due to dose-dependent adverse events, especially in an Asian population. However, evidence supporting the use of low-intensity statins in primary prevention is limited., Objective: We sought to compare clinical outcomes between a low-intensity statin plus ezetimibe and a moderate-intensity statin for primary prevention., Methods: This population-based retrospective cohort study used the Korean nationwide claims database (2002-2019). We included adults without atherosclerotic cardiovascular diseases who received moderate-intensity statins or low-intensity statins plus ezetimibe. The primary outcome was a composite of all-cause mortality, myocardial infarction, and ischemic stroke. The safety outcomes were liver and muscle injuries and new-onset diabetes mellitus (DM). We used standardized inverse probability of treatment weighting (sIPTW) and propensity score matching (PSM)., Results: In the sIPTW model, 1717 and 36 683 patients used a low-intensity statin plus ezetimibe and a moderate-intensity statin, respectively. In the PSM model, each group included 1687 patients. Compared with moderate-intensity statin use, low-intensity statin plus ezetimibe use showed similar risks of the primary outcome (hazard ratio [HR] = 0.92, 95% CI = 0.81-1.12 in sIPTW and HR = 1.16, 95% CI = 0.87-1.56 in PSM model). Low-intensity statin plus ezetimibe use was associated with decreased risks of liver and muscle injuries (subHR [sHR] = 0.84, 95% CI = 0.74-0.96 and sHR = 0.87, 95% CI = 0.77-0.97 in sIPTW; sHR = 0.84, 95% CI = 0.72, 0.96 and sHR = 0.82, 95% CI = 0.72-0.94 in PSM model, respectively). For new-onset DM and hospitalization of liver and muscle injuries, no difference was observed., Conclusion and Relevance: Low-intensity statin plus ezetimibe may be an alternative to moderate-intensity statin for primary prevention. Our findings provide evidence on safety and efficacy of statin therapy in Asian population., Competing Interests: Declaration of Conflicting InterestsThe authors declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Quetiapine myristate (QM), an ester-bonded lipophilic prodrug of quetiapine (QTP), is synthesized and converted into an amphiphilic structure in acidic pH to trigger a novel self-assembled QM nanosuspension (QMN). Following injection, this QMN rearranges within physiological pH to form nanoaggregates in structure, resulting in enhanced physicochemical properties and in vivo therapeutic performance without an initial burst release. The 200-nm-sized QMN exhibits less invasive injection, higher drug content, and better storage stability profile than conventional poly(lactide-co-glycolide) (PLGA) nanosuspensions containing QTP or QM. Following a single intramuscular injection to beagle dogs (35 mg kg -1 QTP), QMN undergoes pH-responsive nanoaggregation to form the lipophilic prodrug, providing esterase-oriented sustained release for five weeks compared with the two-week period of PLGA nanosuspensions. Notably, QMN exhibits improved in vivo pharmacokinetic performance with long-acting delivery while minimizing issues associated with polymeric PLGA formulations, including the initial massive burst release, cellular toxicity, and adverse side effects. These results support the further development of QMN as a novel long-acting injectable to improve patient compliance and dosing frequency., (© 2024 The Author(s). Advanced Science published by Wiley‐VCH GmbH.)

Tadalafil (TD) has poor water solubility but is well absorbed without affecting food intake when administered orally. Owing to patient adherence and therapeutic characteristics, a TD-loaded orodispersible film (TDF) is preferable. However, the mechanistic role of dietary status on the clinical pharmacokinetic analysis of TDF in human volunteers should be investigated because the gastrointestinal environment varies periodically according to meal intervals, although commercial 20 mg TD-loaded tablets (TD-TAB, Cialis ® tablet) may be taken with or without food. TDF was prepared by dispersing TD in an aqueous solution and polyethylene glycol 400 to ensure good dispersibility of the TD particles. In the fasting state, each T/R of Cmax and AUC between TD-TAB and TDF showed bioequivalence with 0.936-1.105 and 1.012-1.153, respectively, and dissolution rates in 1000 mL water containing 0.5% SLS were equivalent. In contrast, TDF was not bioequivalent to TD-TAB under the fed conditions by the C max T/R of 0.610-0.798. The increased dissolution rate of TDF via the micronization of drug particles and the reduced viscosity of the second meal content did not significantly affect the bioequivalence. Interestingly, an increase in second meal intake time from 4 h to 6 h resulted in the bioequivalence by the Cmax T/R of 0.851-0.998 of TD-TAB and TDF. The predictive diffusion direction model for physical digestion of TD-TAB and TDF in the stomach after the first and second meal intake was successfully simulated using computational fluid dynamics modeling, accounting for the delayed drug diffusion of TDF caused by prolonged digestion of stomach contents under postprandial conditions.

The aim of this study was to evaluate the enhanced thermal stability and physicochemical properties of fattigated vaccine antigens. High molecular weight influenza hemagglutinin (Heg) was used as a model antigen because of low heat stability requiring cold chamber. Heg was conjugated with long-chain oleic acid (C18) and short-chain 3-decenoic acid (C10) to prepare fattigated Heg. Circular dichroism analysis revealed no significant changes in the three-dimensional structure post-conjugation. In the liquid state, the fattigated Heg was self-assembled into nanoparticles (NPs) due to its amphiphilic nature, with sizes of 136.27 ± 12.78 nm for oleic acid-conjugated Heg (HOC) and 88.73 ± 3.27 nm for 3-decenoic acid-conjugated Heg (HDC). Accelerated thermal stability studies at 60 °C for 7 days demonstrated that fattigated Heg exhibited higher thermal stability than Heg in various liquid or solid states. The longer-chained HOC showed better thermal stability than HDC in the liquid state, attributed to increased hydrophobic interactions during self-assembly. In bio-mimicking liquid states at 37 °C, HOC exhibited higher thermal stability than Heg. Furthermore, solid-state HOC with cryoprotectants (trehalose, mannitol, and Tween® 80) had significantly increased thermal stability due to reduced exposure of protein surface area via nanonization behavior. The current fattigation platform could be a promising strategy for developing thermostable nano vaccines of heat-labile vaccine antigens., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This study was tasked with the design of mucoadhesive buccal films (MBFs) containing a peptide drug, leuprolide (LEU), or its diverse nanoparticles (NPs), for enhanced membrane permeability via self-assembled nanonization and deformable behavior. An LEU-oleic acid conjugate (LOC) and its self-assembled NPs (LON) were developed. Additionally, a deformable variant of LON (d-LON) was originally developed by incorporating l-α-phosphatidylcholine into LON as an edge activator. The physicochemical properties of LON and d-LON, encompassing particle size, zeta potential, and deformability index (DI), were evaluated. MBFs containing LEU, LOC, and NPs (LON, d-LON) were prepared using the solvent casting method by varying the ratio of Eudragit RLPO and hydroxypropyl methylcellulose, with propylene glycol used as a plasticizer. The optimization of MBF formulations was based on their physicochemical properties, including in vitro residence time, dissolution, and permeability. The dissolution results demonstrated that the conjugation of oleic acid to LEU exhibited a more sustained LEU release pattern by cleaving the ester bond of the conjugate, as compared to the native LEU, with reduced variability. Moreover, the LOC and its self-assembled NPs (LON, d-LON), equivalent to 1 mg LEU doses in MBF, exhibited an amorphous state and demonstrated better permeability through the nanonization process than LEU alone, regardless of membrane types. The incorporation of lauroyl-L-carnitine into the films as a permeation enhancer synergistically augmented drug permeability. Most importantly, the d-LON-loaded buccal films showed the highest permeability, due to the deformability of NPs. Overall, MBF-containing peptide NPs and permeation enhancers have the potential to replace parenteral LEU administration by improving LEU druggability and patient compliance.

Background: Quetiapine (QTP) is a first-line antipsychotic drug, but its therapeutic druggability and patient adherence were limited due to high oral dose strength, low bioavailability and physicochemical/biopharmaceutical issues., Purpose: To investigate the roles of fatty acid chain length and enzyme-oriented QTP controlled release from pH-triggering self-assembled fatty acid conjugated QTP nanosuspensions (NSPs)., Methods: QTP was conjugated with different chain length fatty acids (C10-decanoic acid, C14-myristic acid, C18-stearic acid) to obtain QTP-fatty acid conjugates (QFCs: QD, QM, QS) by exploiting 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/4-dimethylaminopyridine (EDC/DMAP) conjugation chemistry. Then, the solubility, partitioning coefficient (log P), cell viability and cleavage kinetics of QFCs were evaluated. The pH-triggering self-assembled behaviors of QFCs to form QTP-fatty acid NSPs (QDN, QMN, QSN) by varying pH, QFC concentration and proton-to-QTP ratios were characterized. The morphological images, critical micelle concentration (CMC), physicochemical properties and enzyme-oriented QTP controlled release of NSPs were examined., Results: Three QFCs were synthesized with different chain length fatty acids from QTP after desalting fumarate from QTP fumarate. The pH, QFC concentration and proton-to-quetiapine molar ratio could influence physicochemical properties and nanonization behaviors of QFCs. All three QFCs showed no effect on the viability of myoblast cells. The pH-triggering self-assembly of amphiphilic QFCs to form nanoparticles (NPs) occurred as the amine moiety of QTP was readily ionized in a strongly acidic environment (pH 1.2). Interestingly, the longer the fatty acid chain length, the lower water solubility, the higher log P (lipophilicity) and the smaller NP particle size were observed. The conversion rate of QFCs to liberate QTP by esterase in human plasma and liver S9 fractions was also inversely proportional to the fatty acid carbon chain length. Interestingly, the freeze-dried QMN showed the esterase-oriented controlled release of QTP over one month, unlike the initial burst release of QDN or the slowly delayed release pattern of QSN., Conclusion: A new pH-triggering self-assembled nanonization platform was developed using different chain length fatty acid conjugated QTP in low pH environment. By varying fatty acid chain length, the enzyme-oriented QTP controlled release dosage form was challenged to enhance the therapeutic effectiveness of QTP., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have influenced the work reported in this paper., (© 2023 Nguyen et al.)

The aim of this study was to design a novel matrix tablet with enhanced dissolution and pH-independent controlled release of sildenafil citrate (SIL), a drug with pH-dependent solubility, by using solid dispersions (SDs) and polyelectrostatic interactions. SIL-loaded SDs were prepared using various polymeric carriers such as poloxamer 188, poloxamer 407, Soluplus®, polyvinylpyrrolidone (PVP) K 12, and PVP K 17 by the solvent evaporation method. Among these polymers, Soluplus® was found to be the most effective in SDs for enhancing the drug dissolution over 6 h in pH 6.8 intestinal fluid. SIL was well dispersed in Soluplus®-based SDs in an amorphous form. When the Soluplus®-based SDs were added in the tablet containing positively charged chitosan and negatively charged Eudragit® L100, the drug release rate was further modulated in a controlled manner. The charge density of the tablet was higher at pH 6.8 than at pH 1.2 due to the polyelectrostatic interaction between chitosan and Eudragit® L100. This interaction could provide a pH-independent controlled release of SIL. Our study demonstrates that a combinatory approach of Soluplus®-based SDs and polyelectrostatic interactions can improve the dissolution and pH-independent release performance of SIL. This approach could be a promising pharmaceutical strategy to design a matrix tablet of poorly water-soluble drugs for the enhanced bioavailability., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 The Authors. Published by Elsevier Ltd.)

This study aimed to investigate the enhancement of cannabinoid acid solubility and stability through the formation of a cannabinoid acid/cyclodextrin (CD) inclusion complex. Two cannabinoid acids, tetrahydro-cannabinolic acid (THCA) and cannabidiolic acid (CBDA), were selected as a model drug along with five types of CD: α-cyclodextrin (α-CD), β-cyclodextrin (β-CD), γ-cyclodextrin (γ-CD), hydroxypropyl-β-cyclodextrin (HP-β-CD), and methylated-β-cyclodextrin (M-β-CD). Phase solubility studies were conducted using various types of CD to determine the complex stoichiometry. The preparation methods of the CD inclusion complex were optimized by adjusting the loading pH solution and the drying processes (spray-drying, freeze-drying, spray-freeze-drying). The drying process of the cannabinoid acid/M-β-CD inclusion complex was further optimized through the spray-freeze-drying method. These CD complexes were characterized using solubility determination, differential scanning calorimetry (DSC), field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), and 1 H NMR spectroscopy. DSC, XRD, and FE-SEM studies confirmed the non-crystalline state of the cannabinoid acid/CD inclusion complex. The permeation of THCA or CBDA from the M-β-CD spray-freeze-dried inclusion complex was highly improved compared to those of cannabis ethanolic extracts under simulated physiological conditions. The stability of the cannabinoid acid/M-β-CD inclusion complex was maintained for 7 days in a simulated physiological condition. Furthermore, the minimum inhibitory concentration of cannabinoid acid/M-β-CD inclusion complex had superior anti-cancer activity in MCF-7 breast cancer cell lines compared to cannabinoid acid alone. The improved physicochemical and biological performances indicated that these CD inclusion complexes could provide a promising option for loading lipophilic cannabinoids in cannabis-derived drug products.

The objective of this study was to evaluate the effectiveness of organ-on-chip system investigating simultaneous cellular efficacy and real-time reactive oxygen species (ROS) occurrence of anticancer drug-loaded nanoparticles (NPs) using hepatocarcinoma cells (HepG2) chip system under static and hepatomimicking shear stress conditions (5 dyne/cm 2 ). Then, the role of hepatomimetic shear stress exposed to HepG2 and drug solubility were compared. The highly soluble doxorubicin (DOX) and poorly soluble paclitaxel (PTX) were chosen. Fattigated NPs (AONs) were formed via self-assembly of amphiphilic albumin (HSA)-oleic acid conjugate (AOC). Then, drug-loaded AONs (DOX-AON or PTX-AON) were exposed to a serum-free HepG2 medium at 37 °C and 5% carbon dioxide for 24 h using a real-time ROS sensor chip-based microfluidic system. The cellular efficacy and simultaneous ROS occurrence of free drugs and drug-loaded AONs were compared. The cellular efficacy of drug-loaded AONs varied in a dose-dependent manner and were consistently correlated with real-time of ROS occurrence. Drug-loaded AONs increased the intracellular fluorescence intensity and decreased the cellular efficacy compared to free drugs under dynamic conditions. The half-maximal inhibitory concentration (IC 50 ) values of free DOX (13.4 μg/mL) and PTX (54.44 μg/mL) under static conditions decreased to 11.79 and 38.43 μg/mL, respectively, under dynamic conditions. Furthermore, DOX- and PTX-AONs showed highly decreased IC 50 values of 5.613 and 21.86 μg/mL, respectively, as compared to free drugs under dynamic conditions. It was evident that cellular efficacy and real-time ROS occurrence were well-correlated and highly dependent on the drug-loaded nanostructure, drug solubility and physiological shear stress.

Introduction: As direct-acting oral anticoagulants (DOACs) have short half-lives of around 12 h, even a short gap in DOAC therapy may diminish anticoagulation effects, increasing risks of adverse clinical outcomes. We aimed to evaluate clinical consequences of a gap in DOAC therapy with atrial fibrillation (AF) and to identify its potential predictors., Materials and Methods: In this retrospective cohort study, we included DOAC users aged over 65 years with AF from the 2018 Korean nationwide claims database. We defined a gap in DOAC therapy as no claim for a DOAC one or more days after the due date of a refill prescription. We used a time-varying-analysis method. The primary outcome was a composite of death and thrombotic events including ischemic stroke/transient ischemic attack or systemic embolism. Potential predictors of a gap included sociodemographic and clinical factors., Results and Conclusions: Among 11,042 DOAC users, 4857 (44.0 %) patients had at least one gap. Standard national health insurance, non-metropolitan locations of medical institutions, history of liver disease, chronic obstructive pulmonary disease, cancer, or dementia, and use of diuretics or non-oral agents were associated with increased risks of a gap. In contrast, history of hypertension, ischemic heart disease, or dyslipidemia were associated with a decreased risk of a gap. A short gap in DOAC therapy was significantly associated with a higher risk of the primary outcome compared to no gap (hazard ratio 4.04, 95 % confidence interval 2.95-5.52). The predictors could be utilized to identify at-risk patients to provide additional support to prevent a gap., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

This study aimed to design mucoadhesive buccal tablets of leuprolide (LEU) and to manufacture and evaluate the properties of buccal tablets containing LEU-oleic acid conjugate (LOC) and self-assembled LEU-oleic acid nanoparticles (LON), which were developed in a previous study. Hydroxypropyl methylcellulose (HPMC 4000) was used as the mucoadhesive polymer, and tablets were prepared by direct compression. The formulations were characterized by weight, content uniformity, thickness, hardness, swelling index, disintegration time, mucoadhesion time, and drug release. The chosen formulation maintained an adhesion time of up to 6.43 h and a disintegration time of 4.10 h. Drug stability in the mucoadhesive tablets was confirmed after 2 h of storage in human mimic saliva (Phosphate buffer solution pH 6.8). Furthermore, the designed LEU formulation and the LOC and LON developed in a previous study were prepared as buccal tablets and compared. In the dissolution and permeation studies, LON-loaded buccal tablets showed the highest permeation rate. This study suggests that mucoadhesive buccal tablets containing self-assembled LON may effectively increase the medication adherence for pediatric and geriatric patients by improving the bioavailability and permeation rate of LEU., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Background: Leuprolide (LEU), a synthetic nonapeptide analog of naturally occurring gonadotropin-releasing hormone (GnRH), could exert a direct inhibitory activity on the proliferation of prostate cancer cells. However, the short half-life in blood and the biopharmaceutical problem of LEU limit this anticancer activity., Purpose: To improve its druggability for improving anticancer activity, the amine-group targeted LEU was conjugated with different chain lengths of saturated fatty acids (FAs)., Methods: LEU-fatty acid conjugates (LFCs) were synthesized by exploiting N-hydroxysuccinimidyl (NHS) conjugation chemistry. The physicochemical properties and the self-assembled behaviors of the conjugates were extensively investigated. The in vitro anticancer activity of three LFCs was extensively studied in both 2D monolayer and 3D spheroid culture models of a prostate cancer cell line, PC3., Results: Three LFCs could be readily self-assembled into nanoparticles (LFNs) with a small size of around 100 nm, positive charges, and exhibited greater permeability rates compared to the same concentration of LEU, excluding LSN. The chain length of FA in conjugate was positively related to the selectivity index between cancer cells and non-cancerous cell lines. All LFCs showed a superior direct antiproliferative effect on cancer cells in the following order: LSC (98.9%) > LPC (86.7%) > LLC (75.0%) > LEU (8.9%) after repeat daily of the same dose strength of LEU for 4 days. In addition, the 3D spheroid model study indicates that all LFCs with a one-time treatment performed a long-acting inhibitory effect on tumor growth as compared to LEU after 7 days., Conclusion: The conjugation of LEU with different chain lengths of FAs could provide a novel strategy to improve peptide stability and exert an additional superior direct inhibitory effect for the treatment of several hormone-responsive tumor systems using therapeutic peptides., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have influenced the work reported in this paper., (© 2023 Ngo et al.)

Desmopressin acetate (DDAVP), a nonapeptide drug, is easily destroyed by heat in the manufacturing process of orodispersible film (ODF). A new challenging study was conducted to improve thermal stability through glycosylation and hydrogen bonding using carbohydrate gums (agar, arabic gum, carrageenan, xanthan gum) using the solvent casting method. Among gum types, xanthan gum strongly showed dual stabilizing effects of DDAVP via covalent glycosylation and hydrogen bonding, minimizing total impurities and optimizing physicochemical properties of ODF under accelerated conditions for six months. The optimized ODF formulation (O-DDAVP ODF) at a DDAVP and xanthan gum ratio of 1:1.5 had a pharmaceutically equivalent dissolution profile as compared with a commercial 0.2 mg commercial Minirin® tablet in four different media: pH 1.2, pH 4.0, and pH 6.8 buffers and deionized water. Furthermore, O-DDAVP ODF showed in vivo bioequivalence to Minirin® tablets in healthy human volunteers. Glycosylation-oriented stabilization of peptide drug using pharmaceutically active excipients against thermal denaturation could be challenged to design patient-friendly ODF., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Background: A needs-based approach is desirable for the transformation of pharmaceutical education, and to link pharmaceutical education with the health needs of populations and national priorities. There are varying levels of data in the literature on the status of pharmaceutical education in all six World Health Organization (WHO) regions, especially in the context of needs identification and evidence-based policy interventions. The framework for this study was the FIP Development Goals., Objectives: The aim of the study was to develop evidence-based policies through a needs-based approach for pharmaceutical education transformation nationally, regionally and globally by addressing the following objectives: 1. Identify global and regional needs in pharmaceutical education, through a regional SWOT analysis and prioritization of FIP development goals; 2. Develop valid and credible regional roadmaps for pharmaceutical education advancement according to the identified prioritized goals and 3. Develop a global call to action as a policy intervention for advancing pharmaceutical education., Methods: This study was conducted between 2020 and 2021 using a mixed methods approach. Surveys of higher education institutions and a series of qualitative interviews were conducted with national professional leadership organizations, with further regional workshops having 284 participants recruited from the International Pharmaceutical Federation (FIP) membership base, spanning all six WHO regions., Results: Eleven out of 21 FIP DGs were identified as priorities for regional roadmaps and FIP DG 1 (Academic capacity) was identified as a priority in four regions. All regions had distinctive results with an area of commonality between them. There were common weaknesses in the adoption of competency-based education and inter-professional education., Conclusions: It is critical for every country and region to develop needs- and evidence-based policies for the transformation of pharmaceutical education, for which FIP DGs provide a systematic framework., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 International Pharmaceutical Federation.)

Leuprolide is a synthetic nonapeptide drug (pyroGlu-His-Trp-Ser-Tyr-d-Leu-Leu-Arg-Pro-NHEt) that acts as a gonadotropin-releasing hormone agonist. The continuous administration of therapeutic doses of leuprolide inhibits gonadotropin secretion, which is used in androgen-deprivation therapy for the treatment of advanced prostate cancer, central precocious puberty, endometriosis, uterine fibroids, and other sex-hormone-related conditions. To improve the pharmacokinetic properties of peptide drugs, a fatty acid was conjugated with leuprolide for long-term action. In this study, we developed a simple ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method for the simultaneous determination of leuprolide and leuprolide-oleic acid conjugate (LOC) levels. The developed method was validated in terms of linearity, precision, accuracy, recovery, matrix effect, and stability according to the US Food and Drug Administration guidelines, and the parameters were within acceptable limits. Subsequently, the pharmacokinetics of leuprolide and LOCs were evaluated. In vivo rat subcutaneous studies revealed that conjugation with fatty acids significantly altered the pharmacokinetics of leuprolide. After the subcutaneous administration of fatty-acid-conjugated leuprolide, the mean absorption time and half-life were prolonged. To the best of our knowledge, this is the first study showing the effects of fatty acid conjugates on the pharmacokinetics of leuprolide using a newly developed UPLC-MS/MS method for the simultaneous quantification of leuprolide and LOCs.

Rizatriptan (RZT) is an efficient anti-migraine drug which belongs to the class of selective 5 HT (1B/1D) serotonin receptor agonists. Nevertheless, RZT elicits several adverse effects and RZT nasal sprays have a limited half-life, requiring repeated doses that could cause patient noncompliance or harm to the nasopharynx and cilia. The current research aimed to develop orally disintegrating films (ODFs) of RZT employing maltodextrin (MTX) and pullulan (PUL) as film-forming polymers, as well as propylene glycol (PG) as a plasticizer. The ODFs were prepared by solvent casting method (SCM). The technique was optimized using Box-Behnken design (BBD), contemplating the ratios of PUL: MTX and different levels of PG (%) as factor variables. The influence of these factors was systematically analyzed on the selected dependent variables, including film thickness, disintegration time (D-time), folding endurance (FE), tensile strength (TS), percent elongation (%E), moisture content (%), and water uptake (%). In addition, the surface morphology, solid state analysis, drug content uniformity (%), drug release (%), and pH of the RZT-ODFs were also studied. The results demonstrated a satisfactory stable RZT-ODFs formulation that exhibited surface homogeneity and amorphous RZT in films with no discernible interactions between the model drug and polymeric materials. The optimized film showed a rapid D-time of 16 s and remarkable mechanical features. The in vitro dissolution kinetics showed that 100% RZT was released from optimized film compared to 61% RZT released from conventional RZT formulation in the initial 5 min. An animal pharmacokinetic (PK) investigation revealed that RZT-ODFs had a shorter time to achieve peak plasma concentration (T max ), a higher maximum plasma concentration (C max ), and area under the curve (AUC 0-t ) than traditional oral mini capsules. These findings proposed a progressive approach for developing anti-migraine drugs that could be useful in reducing the complications of dysphagia in geriatric and pediatric sufferers.

The objective of this study was to design and evaluate an orodispersible film (ODF) composed of aripiprazole (ARP), prepared using a conventional solvent casting technique, and to fuse a three-dimensional (3D) printing technique with a hot-melt extrusion (HME) filament. Klucel ® LF (hydroxypropyl cellulose, HPC) and PE-05JPS ® (polyvinyl alcohol, PVA) were used as backbone polymers for 3D printing and solvent casting. HPC-, PVA-, and ARP-loaded filaments were applied for 3D printing using HME. The physicochemical and mechanical properties of the 3D printing filaments and films were optimized based on the composition of the polymers and the processing parameters. The crystalline states of drug and drug-loaded formulations were investigated using differential scanning calorimetry (DSC) and powder X-ray diffraction (XRD). The dissolution and disintegration of the 3D-printed films were faster than those of solvent-cast films. HPC-3D printed film was fully disintegrated within 45 ± 3.5 s. The dissolution rate of HPC films reached 80% within 30 min at pH 1.2 and pH 4.0 USP buffer. There was a difference in the dissolution rate of about 5 to 10% compared to PVA films at the same sampling time. The root mean square of the roughness (Rq) values of each sample were evaluated using atomic force microscopy. The higher the Rq value, the rougher the surface, and the larger the surface area, the more salivary fluid penetrated the film, resulting in faster drug release and disintegration. Specifically, The HPC 3D-printed film showed the highest Rq value (102.868 nm) and average surface roughness (85.007 nm). The puncture strength of 3D-printed films had desirable strength with HPC (0.65 ± 0.27 N/mm 2 ) and PVA (0.93 ± 0.15 N/mm 2 ) to prevent deformation compared to those of marketed film products (over 0.34 N/mm 2 ). In conclusion, combining polymer selection and 3D printing technology could innovatively design ODFs composed of ARP to solve the unmet medical needs of psychiatric patients.

This study aimed to verify, for the first time, the need for Good Pharmacy Practice (GPP) regulations as guidelines to provide pharmaceutical care services in community pharmacies in Korea. Statistical analyses were performed with demographic characteristics, institutional factors, and diversity factors of 3 pharmaceutical care services as independent variables and the favorability of GPP implementation as a dependent variable. In assessing the diversity of methods of providing pharmaceutical care services as an indicator of willingness to provide these services, this study understood such diversity as an innovative behavior that represents the efforts and willingness of pharmacists to provide better services. The results of descriptive statistics showed that most pharmacists in community pharmacy recognize that guidelines are necessary to provide better pharmaceutical care services. The statistical correlation analysis results confirmed that a greater need for guidelines was strongly related to higher GPP favorability. The institutional factors had the greatest influence on GPP favorability, rather than diversity factors of pharmaceutical care services, ultimately with the Korean perspectives to equate the GPP with the guidelines for pharmaceutical care services. Our study confirmed that it is a wish and a policy task of community pharmacists in Korea to enact GPP as soon as possible.

Purpose: To conjugate different degree of saturation of C18 fatty acids (stearic acid, oleic acid, and linoleic acid) with the hydroxyl groups of leuprolide acetate (LEU acetate) and to investigate the controlled release and enhanced permeability through self-assembled nanoparticles (L18FNs)., Methods: Yamaguchi esterification with benzoyl chloride and DMAP (4-Dimethylaminopyridine) allowed the conjugation of the fatty acid to the hydroxyl group of LEU. The three conjugates were then designated as stearic acid-conjugated LEU, LSC, oleic acid-conjugated LEU, LOC, and linoleic acid-conjugated LEU, LLC, respectively. The conjugates (L18FCs) were purified using preparative HPLC (Prep-HPLC) and identified through various instrumental analyses., Results: The zeta potential, particle size, and morphology of each L18FNs were evaluated. In the case of LSNs, the zeta potential value was relatively low and the particle size was larger than LONs and LLNs owing to the higher hydrophobicity of saturated fatty chain, while the LLNs showed a higher zeta potential and smaller particle size. In human plasma, LLC showed the fastest degradation rate with the highest accumulative drug release. The permeability of L18FNs was analyzed through the Franz diffusion cell experiment, confirming that the degree of saturation of fatty acids affects the permeability of LFNs. While the permeability of LSNs was not significantly enhanced due to higher particle size after nanonization, LONs and LLNs increased 1.56 and 1.85 times in permeation, respectively, compared to LEU., Conclusion: Utilization of different degree of saturation of fatty acids to conjugate a peptide drug could provide pharmaceutical versatility via self-assembly and modification of physicochemical properties., Competing Interests: Kye Wan Lee reports grants from Ministry of Trade, Industry & Energy (MOTIE, Korea), during the conduct of the study, and is an employee of Dongkook Pharmaceutical Co., Ltd, Seoul, Republic of Korea. The authors report no other potential conflicts of interest in relation to this work and declare that they have no known competing financial interests or personal relationships that could have influenced the work reported in this paper., (© 2022 Park et al.)

In this study, the electrostatic molecular effect of differently charged surfactants on the solubilization capacity and physicochemical properties of salt-caged nanosuspensions (NSPs) containing poorly water-soluble drug was investigated. Anionic rebamipide (RBM) was chosen as a model drug because of its poor water solubility in low pH condition and ionizable acidic forms. Negatively charged sodium lauryl sulfate (SLS) and positively charged cetyltrimethylammonium bromide (CTAB) were selected as surfactants for the preparation of NSPs or in the dissolution medium. Salt-caged NSPs surrounded by NaCl were prepared by the HCl-NaOH neutralization method in the presence of poloxamer 407. Interestingly, the addition of positively charged CTAB in the preparation process or the dissolution media could interfere with the solubilization capacity of salt-caged NSPs containing a negatively charged drug via intermolecular electrostatic attraction. In the presence of positively charged CTAB, the salt-caged NSP was disordered in structure via electrostatic attractive interaction with partially ionizable anionic RBM resulting in changes in the physicochemical properties of the salt-caged NSP such as low drug content, increased particle size, decreased dissolution rate, and the formation of water-insoluble precipitates with rough and irregular crystals. This inhibitory effect of CTAB on the dissolution rate of pure RBM and the salt-caged NSP in pH 6.8 intestinal fluid was pronounced in a concentration-dependent manner mainly owing to the formation of precipitates, so-called poorly soluble complexes. When the salt-caged NSP (F1) was dissolved in DW containing CTAB, the dissolution rate decreased more significantly, dissolving less than 20% within 2 h. Depending on the surfactant charges, the charge density and the initial potential were varied during the dissolution of NSPs in deionized water (DW). In contrast, the negatively charged SLS did not significantly change the physicochemical properties of the salt-caged NSP. For example, the dissolution rate of the salt-caged NSP containing SLS in DW or pH 1.2 gastric fluid remained over 90% for 2 h. Surfactants for the formulation or dissolution media should be chosen carefully because of their effect on the physicochemical properties and solubilization capacity of salt-caged NSPs containing poorly water-soluble and ionizable drugs via electrostatic molecular interactions., (Copyright © 2022 Elsevier B.V. All rights reserved.)

The purpose of this study was to develop a once-daily, bilayer matrix tablet with immediate (IR) and sustained release (SR) layers of poorly water-soluble and absorption site dependent rebamipide (RBM) to substitute three times a day IR tablet. Owing to the pH-dependent poor water solubility of RBM in low pH condition, salt-caged nanosuspensions (NSPs) consisting of RBM and poloxamer 407 (POX 407) or poloxamer 188 (POX 188) were prepared using an acid-base neutralization method to increase the dissolution rate, which was subsequently applied to the immediate-release (IR) layer. Polyethylene oxide (PEO) with different molecular weights (PEO 100,000 and PEO 5,000,000) and hydroxypropyl methylcellulose 4000 (HPMC 4000) were then investigated as SR agents to incorporate into the SR layer with pure RBM via wet granulation method. The dissolution profile of the optimized bilayer tablet having 50% IR and 50% SR layer of 300 mg RBM showed that the IR layer could rapidly disintegrate in pH 1.2 buffer solution within 2 h, reaching 50% of drug release from the tablet, followed by an extended drug release from the SR layer in pH 6.8 buffer over 24 h. An in vivo pharmacokinetic study was carried out in beagle dogs to compare the optimal formulation (300 mg RBM bilayer tablet) and the commercial tablet (Mucosta® 100 mg) as a reference. Unexpectedly, despite enhanced dissolution rate in a controlled manner, a designed bilayer tablet had no dose- and dosage form dependent in vivo bioavailability in beagle dogs as compared with IR 100 mg RBM reference tablet. It was evident that solubility in low pH condition, gastric residence time and absorption site of RBM should be carefully considered for designing specific SR or gastroretentive dosage form to improve therapeutic outcomes., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Background: Hydrophilic Hydroxypropyl Methylcellulose (HPMC) matrix tablets are the standard role model of the oral controlled-release formulation. Nevertheless, the HPMC kinetics for the mechanistic understanding of drug release and hydrodynamic behaviors are rarely investigated. This study aims to investigate the release behaviors of both HPMC and paracetamol (model drug) from the hydrophilic matrix tablet., Methods: Two different viscosity grades of HPMC were used (Low viscosity: 6 cps, High viscosity: 4,000 cps). Three different ratios of drug/HPMC (H:38.08%, M:22.85%, and L:15.23% (w/w) of HPMC amounts in total weight) matrix tablets were prepared by wet granulation technique. The release profiles of the drug and HPMC in a matrix tablet were quantitatively analyzed by HPLC and 1H-Nuclear Magnetic Resonance (NMR) spectroscopy. The hydrodynamic changes of HPMC were determined by the gravimetric behaviors such as swelling and erosion rates, gel layer thickness, front movement data,and distributive Near-Infrared (NIR) chemical imaging of HPMC in a matrix tablet during the dissolution process., Results: High viscosity HPMC tablets showed slower release of HPMC than the release rate of drug, suggesting that drug release preceded polymer release.Different hydration phenomenon was qualitatively identified and corresponded to the release profiles. The release behaviors of HPMC and drug in the tablet could be distinguished with the significant difference with fitted dissolution kinetics model (Low viscosity HPMC 6cps; Korsmeyer-Peppas model, High viscosity HPMC 4000cps; Hopfenberg model, Paracetamol; Weibull model) according to the weight of ingredients and types of HPMC., Conclusion: The determination of HPMC polymer release correlating with drug release, hydrodynamic behavior, and NIR chemical imaging of HPMC can provide new insights into the drug release- modulating mechanism in the hydrophilic matrix system., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Itraconazole (ITZ) is a class II drug according to the biopharmaceutical classification system. Its solubility is pH 3-dependent, and it is poorly water-soluble. Its pKa is 3.7, which makes it a weak base drug. The aim of this study was to prepare solid dispersion (SD) pellets to enhance the release of ITZ into the gastrointestinal environment using hot-melt extrusion (HME) technology and a pelletizer. The pellets were then filled into capsules and evaluated in vitro and in vivo. The ITZ changed from a crystalline state to an amorphous state during the HME process, as determined using DSC and PXRD. In addition, its release into the gastrointestinal tract was enhanced, as was the level of ITZ recrystallization, which was lower than the marketed drug (Sporanox ® ), as assessed using an in vitro method. In the in vivo study that was carried out in rats, the AUC 0-48h of the commercial formulation, Sporanox ® , was 1073.9 ± 314.7 ng·h·mL -1 , and the bioavailability of the SD pellet (2969.7 ± 720.6 ng·h·mL -1 ) was three-fold higher than that of Sporanox ® (*** p < 0.001). The results of the in vivo test in beagle dogs revealed that the AUC 0-24h of the SD-1 pellet (which was designed to enhance drug release into gastric fluids) was 3.37 ± 3.28 μg·h·mL -1 and that of the SD-2 pellet (which was designed to enhance drug release in intestinal fluids) was 7.50 ± 4.50 μg·h·mL -1 . The AUC of the SD-2 pellet was 2.2 times higher than that of the SD-1 pellet. Based on pharmacokinetic data, ITZ would exist in a supersaturated state in the area of drug absorption. These results indicated that the absorption area is critical for improving the bioavailability of ITZ. Consequently, the bioavailability of ITZ could be improved by inhibiting precipitation in the absorption area.

The purpose of this study was to design alginate in situ forming gel (ISFG) injectable with clinically acceptable gelation time and controlled release of hydrophobic drug. Milled or unmilled paliperidone palmitate (PPP) was used. The gelation time was controlled by varying the ratios of glucono-d-lactone (GDL) and pyridoxal 5'-phosphate (PLP) in prefilled alginate solution mixtures (ASMs) containing PPP, CaCO 3 , GDL and PLP for clinically acceptable injectability. However, the gelation time was varied by the alginate type (M/G ratio), storage condition, and drug solubilizers. This ISFG exhibited 32.15 kPa of the maximal compressive stress without causing pain and stiffness. The ISFG containing conically milled PPP released PPP in a controlled manner without exhibiting any initial burst release for 4 weeks. The current alginate ISFG injectable using new combination of PLP and GDL could be used to deliver long-acting injectable drugs., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

In the design of abuse-deterrent formulations (ADFs), pharmaceutical strategies that do not modify the physical and chemical properties of opioid dosage forms should be investigated. Among these, four major drug abusing factors, including particle size by physical modification, swellability, dissolution rate, and solvent extraction, were mainly characterized for evaluating abuse deterrence of narcotics. Tramadol hydrochloride (TMD) was chosen as a model drug. In this study, the frequently used eight generally recognized as safe (GRAS)-listed pharmaceutical excipients, including polyvinyl alcohol (PVA), hydroxypropyl methylcellulose (HPMC 4,000, HPMC 100,000), xanthan gum (XG), cellulose acetate (CA), polyethylene oxide (PEO), carbomer 940 NF, and Compritol® 888 ATO, were selected as abuse deterring agents and used to prepare TMD-loaded tablet. A new abuse-deterrent index (ADI) for compressed TMD-loaded tablets was originally defined and considered as an index of drug abuse deterrence, based on the assumption that it was proportional to particle size and swellability but inversely proportional to dissolution and solvent extraction rates after assigning the categorized five scale scores (one to five) to the four experimental data. The resulting ADI of the selected eight abuse deterring agents in deionized water was given in decreasing order: HPMC 4000 > carbomer 940 > Compritol® 888 ATO > XG > PVA > HPMC 100,000 > PEO, and CA while in 40% hydro-alcoholic solution in the decreasing order: carbomer 940 > HPMC 4,000 ≒ XG > PVA > HPMC 100,000 > PEO > Compritol® 888 ATO > CA. Interestingly, the HPMC 4,000 and carbomer 940 showed the highest ADI and gave drug abuse deterrent potential. This study could provide a pharmaceutical strategy that utilizes a variety of abuse-deterring agents and resist to extraction solvents in designing drug abuse-deterrent formulations and establishing their standard guidelines for regulatory authorities., (Copyright © 2021 Elsevier B.V. All rights reserved.)

In this study, volatile perfume was encapsulated in microcapsules (MCs) via interpolyelectrolyte complexes (IPECs) of oppositely charged polymers, with high encapsulation efficiency, to be delivered in a sustained manner. Positively charged chitosan (CTS) and negatively charged Eudragit® S100 (ES100) were used as eco-friendly biopolymers. Limonene (LMN) was selected as the model perfume. First, the solution of LMN in ethyl acetate and poloxamer 407 (POX407) in acidic solution was emulsified using ultrasonication. CTS and ES100 were added in that particular order to form o/w emulsion. LMN-loaded microcapsules (LMN-MCs) were prepared by adjusting the pH and freeze-drying for solidification. The electrostatic interactions of CTS and ES100 to form IPECs were highly dependent on pH, changing in the microscopic images of emulsion droplets and zeta potential. The NH 3 + group of CTS and the COO - group of ES100 caused the electrostatic interactions at a specific pH. The formation mechanism of LMN-MCs was successfully validated using instrumental analysis, charge density, and energy dispersive X-ray spectrometer (EDS) mapping. Encapsulation efficiency, loading content, and release rates of LMN-MCs varied according to the ratios of CTS and ES100, demonstrating optimal performance at a 1:1 ratio. The current LMN-MCs could provide a simple manufacturing process with high performance in terms of encapsulation efficiency (>94%), drug loading, yield and sustained release of volatile perfume for 120 h., (Copyright © 2021 Elsevier B.V. All rights reserved.)

The aim of this study was to develop a stable microemulsion (ME) for transdermal delivery of tetrahydrocannabinolic acid (THCA) and cannabidiolic acid (CBDA). The lipid-based vehicles were selected by screening cannabinoid solubility and the emulsifying ability of surfactants. Pseudo-ternary phase diagrams were constructed by formulation of cannabinoids with Capryol® 90 as oil phase, Tween® 80, Solutol® HS15, Procetyl® AWS, and Cremophor® RH40 as surfactants, ethanol as cosurfactant, and distilled water as the aqueous phase. A significant improvement in transmembrane flux (J ss ), permeability coefficient (K p ), and enhancement ratio (E R ) was found in one system compared to other formulations. This ME consisted of 1.0% (w/w) of cannabinoids, 5% (w/w) of Capryol® 90, 44% (w/w) S mix (2:1, Procetyl® AWS and Ethanol) and 50.0% (w/w) of distilled water. Additionally, the effects of pH on the permeation of the cannabinoids were investigated. Based on the pH value THCA and CBDA-loaded ME exhibited the highest permeation at pH 5.17 and pH 5.25. After storing the pH-adjusted P2 ME and the optimized P2 ME for 180 days at 4℃ and 25℃, the content of cannabinoids was over 95%. Consequently, the cannabinoid-loaded ME system is a promising option for solubilizing and stabilizing lipophilic drugs like cannabinoids and utilize them for transdermal delivery., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Industrial-scale pharmaceutical applications still face many challenges in overcoming the low absorption and bioavailability of poorly water-soluble drugs. Hot-melt extrusion has emerged as a promising approach with continuous processing on an industrial scale for the preparation of drug delivery systems. Many reviews have mentioned the potential applications, processes, principles and advantages and disadvantages of hot-melt extrusion in the pharmaceutical industry. However, a focus on the recent progress of hot-melt extrusion, which investigates the impacts of processes and formulations of solid dispersions of poorly water-soluble drugs, is missing. In this review, various factors, including polymers, drug properties, additives and surfactants, in solid dispersion SD formulations by hot-melt extrusion will be discussed. Moreover, the effects of the hot-melt extrusion process on the physicochemical properties of solid dispersions will be mentioned. The utilization of molecular interactions in hot-melt extrusion to improve drug stability will also be described. Overall, this summary of recent studies on solid dispersion by hot-melt extrusion will provide perspectives and effectiveness for the development of formulations containing poorly water-soluble drugs., (Copyright © 2021 Elsevier B.V. All rights reserved.)

This study aimed to investigate the role of micellization of sodium lauryl sulfate (SLS) in poloxamer 407 (POX)-based solid dispersions (POX-based SDs) using the anti-solvent method in enhancing the dissolution rate of practically water-insoluble cilostazol (CLT). Herein, SLS was incorporated into CLT-loaded SDs, at a weight ratio of 50:50:10 of CLT, POX, and SLS by three different methods: anti-solvent, fusion (60 °C), and solvent (ethanol) evaporation. The SDs containing micellar SLS in the anti-solvent method were superior in the transformation of the crystalline form of the drug into a partial amorphous state. It was notable that there was an existence of a hydrophobic interaction between the surfactant and the hydrophobic regions of polymer chain via non-covalent bonding and the adsorption of micellar SLS to the POX-based SDs matrix. Moreover, SLS micellization via the anti-solvent method was effectively interleaved in SDs and adhered by the dissolved CLT, which precluded drug particles from aggregation and recrystallization, resulting in improved SD wettability (lower contact angle) and reduced particle size and dissolution rate. In contrast, SDs without micellar SLS prepared by the solvent method exerted drug recrystallization and an increase of particle size, resulting in decreased dissolution. Incorporation of surfactant below or above critical micellar concentration (CMC) in SDs using the anti-solvent method should be considered in advance. Dissolution results showed that the pre-added incorporation of micellar SLS into POX-based SDs using the anti-solvent method could provide a way of a solubilization mechanism to enhance the dissolution rate of poorly water-soluble drugs.

Purpose: To investigate the effects of solvents on the formation of self-assembled nanonization of albumin-oleic acid conjugates (AOCs) using a solvent exchange mechanism for the construction of in situ forming implants (ISFI)., Methods: A poorly water-soluble drug, paliperidone palmitate (PPP), was chosen as the model drug. AOC was synthesized with the 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) reaction. Dichloromethane, tetrahydrofuran, ethanol, N-methyl-2-pyrrolidone, dimethyl sulfoxide, and deionized water were selected to investigate the formation of self-assembled AOC nanoparticles (AONs). The volume ratios of organic solvents against water could determine the miscibility, injectability, and in situ nanonizing capability without aggregation., Results: As the polarity of the organic solvents increased, the AONs exhibited a spherical shape, and the larger the volume of the solvent, the smaller the size of the AONs. To use AOC in ISFI for controlled release of PPP, poly(d,l-lactide-co-glycolide) (PLGA) was combined with the AOC in 2 mL of N-methyl-2-pyrrolidone and water solution (1.8/0.2 ratio). The release rates of all formulations exhibited similar curve patterns overall but were more controlled in decreasing order as follows: AOC, PLGA, and AOC/PLGA for 14 days., Conclusion: A combined formulation of AOC and PLGA was found to effectively control the initial burst release of the drug., Competing Interests: The authors declare that there are no conflicts of interest regarding the publication of this study., (© 2021 Yu et al.)

Fucoidan is well known to have various biological functions and is often investigated for pharmaceutical applications. Several studies have been conducted on clinical applications of fucoidan in recent years, especially regarding its oral drug delivery. Although fucoidan has shown promising results in various dosage forms, its potential applications as a dietary supplement have been demonstrated, and recent studies show that oral administration of fucoidan is preferred. However, the focus on the oral delivery of fucoidan in recent studies has caused its potency in therapy to be understudied. This review aims to provide results on the promising fucoidan activity by oral administration with in vivo studies. In addition to using it as an active ingredient, the utilization of fucoidan as an excipient in oral drug delivery systems will be discussed. An overview of fucoidan administration by oral delivery in recent promising studies will provide a direction for further investigations in clinical applications, particularly for fucoidan, which has a broad spectrum of bioactive properties., (Copyright © 2021 Elsevier B.V. All rights reserved.)

The freeze-drying process has been particularly attractive for preparing tablets for controlled drug release. Although traditional methods, such as granulation or direct compression methods, have been used in various studies to produce tablets with controlled release, freeze-drying processes have been utilized in certain circumstances due to their distinct advantages. However, overall, further development of these strategies, which started with early studies on orally disintegrating tablets, is still necessary. In this review, the incorporation of different formulations into freeze-dried tablets will be discussed. Moreover, the use of excipients, freeze-drying conditions, formulation reconstitution and tablet structure for optimizing the performance of freeze-dried tablets will be reported, including strategies with nanoformulations and natural materials. Generally, this discussion with potential approaches will benefit further development of freeze-dried tablets containing drugs in the pharmaceutical industry., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Dapagliflozin (DAP), which improves glycemic control in patients with type 2 diabetes mellitus, has poor physical properties against heat and moisture, thus hindering its manufacturing potential. The superior physicochemical properties of a recently developed cocrystal of DAP and citric acid (DAP cocrystal) in comparison with those of DAP and Forxiga ® , a patented solvate form with propandiol monohydrate, were identified via structural analysis and moisture sorption isotherm. For the first time, the formulation, manufacturability, and in vivo bioavailability of DAP cocrystals were successfully investigated to develop oral dosage forms that substitute Forxiga ® . The intrinsic dissolution rate of DAP cocrystal was controlled by varying particle size distribution. Unlike the direct compression (DC), roller compaction (RC) was more preferable to obtain good flowability of dry granules for a continuous manufacturing system. The cocrystal structure was maintained throughout the stability assessment period. In Vitro dissolution pattern differences of the optimized DAP cocrystal tablet with RC and the reference tablet, Forxiga ® 10 mg, were pharmaceutically equivalent within 5% in four different media. Furthermore, comparative pharmacokinetic analysis confirmed that a 10 mg DAP cocrystal tablet with RC was bioequivalent to a 10 mg Forxiga ® tablet, as assessed in beagle dogs and human volunteers.

Solid dispersions offer many advantages for oral drug delivery of poorly water-soluble drugs over other systems, including an increase in drug solubility and drug dissolution. An improvement in drug absorption and the higher bioavailability of active pharmaceutical ingredients in the gastrointestinal tract have been reported in various studies. In certain circumstances, a rapid pharmacological effect is required for patients. Fastdissolving solid dispersions provide an ideal formulation in such cases. This report will provide an overview of current studies on fast-dissolving solid dispersions, including not only solid dispersion powders with fast dissolution rates but also specific dose form for the controlled release of poorly water-soluble drugs. Specifically, the applications of fast-dissolving solid dispersions will be described in every specific case. Moreover, pharmaceutical approaches and the utilization of polymers will be summarized. The classification and analysis of fastdissolving solid dispersions could provide insight into strategies and potential applications in future drug delivery developments., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Aspirin has emerged as a promising intervention in cancer in the past decade. However, there are existing controversies regarding the anticancer properties of aspirin as its mechanism of action has not been clearly defined. In addition, the risk of bleeding in the gastrointestinal tract from aspirin is another consideration that requires medical and pharmaceutical scientists to work together to develop more potent and safe aspirin therapy in cancer. This review presents the most recent studies of aspirin with regard to its role in cancer prevention and treatment demonstrated by highlighted clinical trials, mechanisms of action as well as approaches to develop aspirin therapy best beneficial to cancer patients. Hence, this review provides readers with an overview of aspirin research in cancer that covers not only the unique features of aspirin, which differentiate aspirin from other non-steroidal anti-inflammatory drugs (NSAIDs), but also strategies that can be used in the development of drug delivery systems carrying aspirin for cancer management. These studies convey optimistic messages on the continuing efforts of the scientist on the way of developing an effective therapy for patients with a low response to current cancer treatments., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

The WHO Biopharmaceutical Classification System (BCS) is a practical tool to identify active pharmaceutical ingredients (APIs) that scientifically qualify for a waiver of in vivo bioequivalence studies. The focus of this study was to engage a global network of laboratories to experimentally quantify the pH-dependent solubility of the highest therapeutic dose of 16 APIs using a harmonized protocol. Intra-laboratory variability was ≤5 %, and no apparent association of inter-laboratory variability with API solubility was discovered. Final classification "low solubility" vs "high solubility" was consistent among laboratories. In comparison to the literature-based provisional 2006 WHO BCS classification, three compounds were re-classified from "high" to "low-solubility". To estimate the consequences of these experimental solubility results on BCS classification, dose-adjusted in silico predictions of the fraction absorbed in humans were performed using GastroPlus®. Further expansion of these experimental efforts to qualified APIs from the WHO Essential Medicines List is anticipated to empower regulatory authorities across the globe to issue scientifically-supported guidance regarding the necessity of performing in vivo bioequivalence studies. Ultimately, this will improve access to affordable generic products, which is a critical prerequisite to reach Universal Health Coverage., Competing Interests: Conflict of interest: The authors report no conflict of interest., (Copyright © 2021 by the authors.)

An acid-base neutralization technique has generated interest for the ability to achieve an enhanced dissolution of pH-dependent weakly basic or acidic poorly water-soluble drugs. However, the underlying nanonization mechanism, following acid-base neutralization, requires further elucidation. We hypothesized that the nanosuspensions (NSPs) via nanonization of drug particles could be attributed to the "salt-induced effect" and surfactant-driven micellization after acid-base neutralization. Rebamipide (RBM) and valsartan (VAL) were chosen as model drugs owing to poor water solubility and pH-dependent aqueous solubility. The drug NSP was rapidly obtained via salt formation (NaCl) after neutralization of the drug in basic NaOH solution and poloxamer 407 (POX 407) in acidic HCl solution. The NSP surrounded by NaCl salt was further stabilized by POX 407. The resulting NaCl salt modulated the critical micelle aggregation of POX 407, stabilizing the drug-loaded NSP in a cage of salt and micellar surfactant. In non-assisted homogenization, size analysis indicated the relationship between salt concentration and size reduction. Fourier transform infrared (FTIR) spectra revealed that the existence of hydrogen bonding between the drug and surfactant after neutralization, attributed to NSP size reduction. Changes in drug crystallinity to the nano-amorphous state were confirmed by powder X-ray diffraction (PXRD). Overall, the salt-induced drug NSP synergistically enhanced the dissolution rate, narrowing a gap between drug dissolution profiles in different pH environments., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The aims of this study were to design different chain length fatty acid-conjugated albumin nanoparticles (ANPs) and evaluate their anticancer activity in the HCT116 human colorectal cancer xenograft mouse model. Doxorubicin hydrochloride (DOX·HCl) was chosen as a model drug. The different chain lengths of fatty acids (butyric acid; C4, and stearic acid; C18) in albumin conjugates exhibited different physicochemical properties and anticancer activity. Fatty acid-conjugated albumin aided the formation of self-assembled structures with an average size of approximately 200 nm and a negative charge when incubated with excess DOX in an aqueous solution. DOX-loaded long-chain C18-conjugated ANPs allowed efficient encapsulation of hydrophobic DOX into the core of the self-assembled structure, enabling higher drug loading, enhanced colloidal stability and controlled release behavior in PBS pH 7.4 medium as compared with free DOX·HCl or non-fatty acid conjugated ANPs. Furthermore, DOX-loaded fatty acid-conjugated ANPs showed an increased cellular uptake intensity and cytotoxic effects in vitro. In vivo, HCT116 xenograft model experiments confirmed that DOX-loaded C18-conjugated ANPs showed improved anticancer activity and reduced side effects compared with the DOX-treated groups. The long-chain fatty acid-conjugated ANPs synergistically activated the interaction with the free-fatty acid receptor (FFAR) on HCT116 colorectal cancer cells as compared with short-chain C4 or other non-conjugated ANPs. Specifically, DOX-loaded C18-conjugated NPs exhibited significant performance to overexpressed FFAR4 on HCT116 colorectal cancer cells. The fatty acid chain length in the fattigation-platform system could be a promising molecular moiety to improve targeting efficiency and drug accumulation in various cancer therapy., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Amorphous solid dispersions (ASDs) improve the oral delivery of poorly water-soluble drugs. ASDs of olanzapine (OLZ), which have a high melting point and low solubility, are performed using a complicated process. Three-dimensional (3D) printing based on hot-melt pneumatic extrusion (HMPE) is a simplified method for producing ASDs. Unlike general 3D printing, printlet extrusion is possible without the preparation of drug-loaded filaments. By heating powder blends, direct fused deposition modeling (FDM) printing through a nozzle is possible, and this step produces ASDs of drugs. In this study, we developed orodispersible films (ODFs) loaded with OLZ as a poorly water-soluble drug. Various ratios of film-forming polymers and plasticizers were investigated to enhance the printability and optimize the printing temperature. Scanning electron microscopy (SEM) showed the surface morphology of the film for the optimization of the polymer carrier ratios. Differential scanning calorimetry (DSC) was used to evaluate thermal properties. Powder X-ray diffraction (PXRD) confirmed the physical form of the drug during printing. The 3D printed ODF formulations successfully loaded ASDs of OLZ using HMPE. Our ODFs showed fast disintegration patterns within 22 s, and rapidly dissolved and reached up to 88% dissolution within 5 min in the dissolution test. ODFs fabricated using HMPE in a single process of 3D printing increased the dissolution rates of the poorly water-soluble drug, which could be a suitable formulation for fast drug absorption. Moreover, this new technology showed prompt fabrication feasibility of various formulations and ASD formation of poorly water-soluble drugs as a single process. The immediate dissolution within a few minutes of ODFs with OLZ, an atypical antipsychotic, is preferred for drug compliance and administration convenience.

This study aimed to design the ideal nanonizing vehicle for poorly water-soluble model curcumin (CCM) using fattigation-platform nanotechnology, and to investigate the effects of fatty acid salts chain length on nanonizing CCM and its efficient delivery to different cancer cells. HSA-fatty acid conjugates were synthesized by EDC/NHS coupling. Fattigation-platform nanomicelles (NMs), prepared by film hydration, exhibited uniform and spherical morphology, although, each NM varied in particle size, zeta potential, and critical micelle concentration according to the types of fatty acid. Preliminary solubility studies of albumin conjugates with 5 types of fatty acid salts of different chain lengths revealed that C14 exhibited the highest solubilization of CCM. CCM-loaded HSA-C14 NMs demonstrated the highest drug content (5.35 ± 0.48%) and loading efficiency (95.93 ± 1.87%) compared to other NMs. It exhibited enhanced drug release rate and reduced micelle size in biorelevant dissolution medium. Interestingly, this solubilization approach was well applied in poorly water-soluble docetaxel trihydrate (DTX). Preliminary solubility results of DTX was also corresponded to the stable nanonization phenomenon in biorelevant dissolution medium. Compared to the CCM EtOH solution, HSA-C14 NMs showed higher internalization in cancer cell lines A549 and MCF-7, and consequently, exhibited significantly increased cytotoxicity against both cell lines. Therefore, this study provides a new solubilization approach for poorly water-soluble drugs using fatty acid salts of different chain lengths and their micellar formations via nanonization, which could be a promising tool for targeted cancer therapy using poorly water-soluble drugs., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

3D-printing technology is growing in importance due to increased availability and a wider range of applications. Here, we prepared and evaluated a hot melt pneumatic (HMP) 3D-printed QR (Quick Response)-coded orodispersible film (QRODF) containing a poorly water-soluble aripiprazole (ARP). Moreover, QRODF was formulated to evaluate the extrusion process and characterize physicochemical properties of drug-loaded films. QRODF was designed with a 30-mm length/width and 0.3-mm thickness by varying QRODF formulations with different polyethylene oxide 100,000(PEO)/poloxamer 188(POX188) ratios and then optimized for extrusion accessibility and film-forming capability. The optimal QRODF formulation was further controlled by ARP and citric acid addition (pH control) for salivary applicability and dissolution rate. Physicochemical evaluation of QRODF was performed by scanning electron microscopy, differential scanning calorimetry, and powder X-ray diffraction. Dissolution studies were performed in buffer media (pH 1.2) following USP Apparatus type II method. Drug-loaded QRODF was scannable using a smartphone. Drug release from QRODF rapidly reached over 95% and was dependent on polymer/poloxamer ratios. By optimizing PEO/POX/drug ratio, the morphology and physical properties of the oral film were changed. Furthermore, disintegration and dissolution rates of ARP-loaded QRODF were successfully established in a controlled manner., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Cellular properties and microenvironments, as well as the characteristics of nanoparticles (NPs), affect the cellular uptake and cytotoxic effects of drug-loaded NPs. Since there is fluid flow in the human blood system, fluid flow also affects the drug delivery efficiency of NPs. This study aimed to evaluate the cellular behaviors of drug-loaded soft NPs on A549 cancer cells under different levels of shear stress (0.5, 5, and 50 dynes/cm 2 ) in the biomimetic microfluidic system. The soft self-assembled NPs were formed by the gelatin-oleic conjugate (GOC). The poorly water-soluble coumarin-6 or paclitaxel (PTX) were used as model markers for encapsulation within self-assembled NPs (C-GONs or PTX-GONs, respectively). The cellular uptake of C-GONs was found to be improved with shear-stress dependence. The inhibitory concentration (IC 50 ) of PTX-GONs at 0.5, 5, and 50 dynes/cm 2 was 0.106 µg/mL, 0.108 µg/mL, and 0.091 µg/mL, respectively, as compared to 0.138 µg/mL in a static condition. The cell killing efficiency of PTX-GONs was increased in the highest shear stress of 50 dynes/cm 2 in the static condition, and other levels of shear stress in dynamic conditions.

Nanoparticle-protein interactions under conditions mimicking physiology determine how nanoparticles (NPs) will behave inside blood vessels and, therefore, the overall outcome of the drug-delivery system. Here, for the first time, we explore the effects of bio-mimicking shear stress and protein corona conditions on novel active targeting of clickable fattigation nanoparticles (NPs) for cancer therapy. Active targeting dibenzocyclooctyne-functionalized biocompatible gelatin-oleic NPs (GON-DBCOs) via a bioorthogonal click reaction were prepared by the desolvation method for delivery of docetaxel (DTX) to lung and breast cancer models. The effect of shear stress (5 dyne/cm 2 ) and human serum albumin (HSA) protein corona on the cellular behavior of NPs was explored under a dynamic microfluidic system in lung (A549) and breast (MCF-7) cancer cell lines. The developed drug-loaded NPs had a particle size of 300 nm, a narrow size distribution, positive zeta potential, high encapsulation efficacy (72.4%), and spherical morphology. The particle size of the protein corona-coated NPs increased to 341 nm with a negative zeta potential. The inhibitory dose (IC 50 ) increased approximately 3- and 42-fold in A549 and MCF-7 cells, respectively, under dynamic microfluidic conditions compared to static conditions. Cellular uptake was significantly decreased in the presence of shear stress and a protein corona, compared with static conditions, in both lung (A549, **p < 0.01) and breast (MCF-7, *p < 0.05) cancer cell lines. Clathrin-and energy-dependent pathways were found to be involved in the cellular uptake of NPs. This study could serve as a vital tool for the evaluation of NPs under aggressive bio-mimicking conditions comprising shear stress and a protein corona to predict the in vivo performance of NPs and support the preclinical and clinical translation of NP drug delivery systems., Competing Interests: Declaration of competing interest The authors declare no competing interests., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The aim of this study was to prepare various types of solid dispersions (SDs) by the hot-melt extrusion technique. Next, process analytical technology (PAT) such as Fourier transform-infrared (FT-IR) and Raman and near infrared (NIR) spectroscopy were applied to determine the solubilization effect. The SDs and its tablets were prepared. Differential scanning calorimetry (DSC), X-ray diffraction (XRD), and scanning electron microscopy (SEM) were performed to determine the morphological and crystalline characteristics of the SDs. Additionally, PAT analyses were performed to identify the solubilization of the celecoxib. Dissolution testing was performed using the paddle method indicated in the US Pharmacopeia Apparatus II. Based on SEM, DSC, and XRD analysis, all SDs changed successfully from the crystalline to the amorphous form. However, FT-IR, Raman, and NIR analysis used in PAT showed that SDs were divided into two groups. New peaks formed as the amount of drug loading increased to >50% in the SD and the dissolution rates were lower than those of the marketed drug. Drug loading levels of ≤50% showed no new peak and exhibited strong solubilization effects. PAT tools can be used to discriminate between extrudates with poor (<50% drug release after 120 min) and desirable (>75% drug release after 120 min) dissolution performance.

Solubilizing adjuvants are commonly used to dissolve insoluble drugs by simply adding in a formulation. In this study, gelatin and oleic acid sodium salt (OAS), a generally recognized as safe-listed material were chosen and conjugated to develop a natural solubilizing adjuvant using the fattigation platform technology to enhance solubility and dissolution rate of poorly water-soluble drugs according to self-assembly and nanonization principle when simply mixed with poorly water-soluble drugs. We synthesized the gelatin and OAS conjugates (GOC) at three different ratios (1:1, 1:3, 1:5; GOC 1, GOC 2, and GOC 3, respectively) via the 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide reaction using a spray dryer. This amphiphilic micronized GOC was self-assembled into nanoparticles. The synthesis of new amphiphilic conjugates was identified through Fourier transform-infrared (FT-IR) spectroscopy. The powder properties of the GOCs, such as angle of repose, bulk density, and tapped density were varied with the oleic acid bonding ratio. Then, GOCs were utilized to investigate the enhanced solubility and release rate of various poorly water-soluble drugs such as cilostazol (CSZ), coenzyme Q10, ticagrelor, telmisartan, aprepitant and itraconazole as model drugs. Based on the solubility studies by concentration and type of GOCs, 3% GOC 2 was selected. When this GOC was mixed with these model drugs by the physical mixing, wetting and hot melting methoods, the solubility was highly enhanced compared to the pure control drug, ranging from 20 to 150,000 times. In case of CSZ, all formulations were significantly improved release rate compared to the of CSZ alone and the reference tablet, cilostan® (Korea United Pharm) in simulated intestinal fluid containing 0.2% sodium lauryl sulfate. Differential scanning calorimetry and powder X-ray diffraction were conducted to confirm the crystal polymorphic structure of CSZ, and as a result they changed to diminutive peak intensity compared to CSZ alone. Field-emission scanning electron microscopy indicated that GOC was round with a reduced size of about 100 nm. The reduction of drug particles via nanonization and self-assembly of amphiphilic GOC in an aqueous media could be a key factor to improve poor water solubility by providing a favorable dispersion of drug molecules in an amphiphilic network., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Extracellular vesicles have an excellent ability to transfer their contents to cells. Extracellular vesicles can also be engineered to deliver therapeutic molecules to target cells. Although a number of studies have exploited synthesized nanoparticles in the treatment of neurological disease in the past few years, extracellular vesicles have been investigated and shown tremendous promise for clinical applications because they are safe and have strong targeting specificity. Different types of extracellular vesicles have been studied and modified for delivering therapeutic factors in neurological disease, including extracellular vesicles loaded with natural therapeutic factors and therapeutic molecules. In this review, we discuss delivery systems using extracellular vesicles containing molecules of interest and then focus on main strategies used for EV loading and surface modification. Discussing these important issues will support and facilitate the design and development of promising techniques and products for neurological therapy., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

For a number of decades, schistosomiasis has remained a public threat and an economic burden in a number of countries, directly impacting over 200 million people. The past 15 years have seen tremendous progress in the development of high-throughput methods for targeting or compound selection that are vital to early-stage schistosome drug discovery research. Genomewide approaches to analyze gene expression at the transcriptional and other -omic levels have helped immensely for gaining insight into the pathways and mechanisms involved in the schistosomiasis and it is expected to revolutionize the drug discovery as well as related diagnostics. This review discusses the most recent progress of pharmacology and genomics concerning schistosomiasis with a focus on drug discovery and diagnostic tools. It also provides chemical structural insights of promising targets along with available in vitro and/or in vivo data. Although significant research has been done to identify new molecules for the treatment and new methods for diagnosis, the necessity of new options for the sustainable control of schistosomiasis remains a great challenge., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

The long history of discovery and recently encouraging studies of the anti-cancer effect of aspirin promise a closer step to widely used aspirin-based medication in cancer therapy. To resolve the poor water-solubility of aspirin and low encapsulation efficiency of exosomes for further developing a new delivery of aspirin as anti-cancer treatment, our nanoamorphous exosomal delivery platform was established. In this study, the anti-tumour effects of nanoamorphous aspirin-loaded exosomes with exosomes derived from breast and colorectal cancer cells, were comprehensively studied using both in vitro and in vivo models. These exosomes displayed enhanced cellular uptake via both clathrin-dependent and -independent endocytosis pathways, and significantly improved cytotoxicity of aspirin to breast and colorectal cancer cells, accompanied by the enhanced apoptosis and autophagy. Remarkably, this nanoamorphous exosomal platform endowed aspirin with the unprecedented cancer stem cell eradication capacity. Further animal study demonstrated that this developed exosomal system was able to efficiently deliver aspirin to in vivo tumours. The active targeting of these exosomes to tumour was further improved by conjugating an aptamer specifically targeting EpCAM protein. Hence, this nanoamorphous structured exosome system effectively transformed aspirin into a potential cancer stem cell killer with distinguished properties for clinical translation., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Despite several studies on film-forming systems with the advantages of both the film and the hydrogel, there are still no effective systems for fast film formation with a high level of control over permeability. In this study, a film-forming system for the delivery of nanomedicine, termed a film-forming nanogel (FFN), was produced and investigated for the first time to meet this need. The objective of this research was to study a new generation of film-forming hydrogels (FFHs) loaded with curcumin nanoparticles (CUR-GNPs) for transdermal applications. FFHs were prepared by employing zein and HPMC 4000 as film-forming polymers. Meanwhile, CUR-GNPs were obtained by sonoprecipitation. The film-forming time, particle characteristics and FFN drug release profile were assessed. The optimized FFH had a smooth surface and a fast drying time of 6 min and 4.5 min in vitro and ex vivo, respectively. Additionally, high, sustained drug permeation from the FFN was observed after 24 h. The FFH containing CUR-GNPs showed potential for application in transdermal drug delivery with a fast film-forming time, uniform particle dispersion and high, sustained drug permeation.

In recent years, various oral dosage forms using biomaterials have been developed to deliver drugs to the colon for therapy due to the advantages of local treatment and its ideal location for drug delivery. To achieve site-specific delivery, the complete drug should be released in the colon, while the drug must be protected or their delivery minimized in the stomach and small intestine. The use of natural or synthetic polymers has been reported for these purposes. The roles of zein in drug delivery have been identified with various types of formulations for improving bioavailability, controlled drug release and targeted delivery. Although zein has been demonstrated as a potential material for pharmaceutical applications, a review of zein in the gastrointestinal tract for stabilizing drug- and colon-specific delivery is still missing. In the present review, we aim to provide typical strategies for using zein in formulations to minimize drug release/ensure drug protection in the upper part of the gastrointestinal tract. Furthermore, effective fabrications or modifications for drug release in the colon will be highlighted. This primary resource of related methods of using zein in the gastrointestinal tract will advance technologies for using it as a natural polymer for drug delivery., (Copyright © 2019 Elsevier B.V. All rights reserved.)