Search

Rational optimization of nanoparticle (NP) surfaces is essential for successful conjugation of proteins to NPs for numerous applications. Using surface-roughened NPs (SRNPs) and quasi-spherical NPs (QSNPs) as two model nanostructures, we examined the effects of local surface curvature on protein conformation and interfacial behaviors by circular dichroism (CD) spectroscopy, fluorescence emission spectroscopy (FES), and isothermal titration calorimetry (ITC). The surface of SRNPs consisted of a mixture of undercoordinated and close-packed surface atoms at the highly curved and locally flat surface regions, respectively, whereas QSNPs were primarily enclosed by {100} and {111} facets covered with close-packed surface atoms. Our findings demonstrated that: 1) SRNPs possess higher tendency to denature BSA and accommodate a higher number of BSA molecules on the surface and 2) the aggregation of AuNP-BSA complexes, likely induced by either denatured BSA or reduced electrostatic repulsion between complexes, is dependent on both the BSA concentration and the NP surface curvature. This study also indicated that NP local surface curvature could potentially be used as a design strategy to preserve the biological function of proteins., Competing Interests: Declaration of Competing Interest There are no conflicts to declare., (Copyright © 2020 Elsevier B.V. All rights reserved.)

To maintain osmotic balance, cells usually produce neutral solutes (i.e., osmolytes), together with charged species to cope with salinity stress. Osmolytes are known to be important in stabilizing/destabilizing macromolecules (e.g., proteins) via depletion /accumulation around their surfaces. To better understand the physiological fate of nanoparticles (NPs), we investigated the effect of osmolytes [(urea and trimethylamine N-oxide (TMAO)] and specific anions (NO 3 - and F - ) on the interactions between NPs and supported lipid bilayers (SLBs). Carboxylated polystyrene NPs (60 nm) and 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) were chosen as model NPs and lipid. Quartz crystal microbalance with dissipation monitoring (QCM-D) was used to quantify NP deposition dynamics. Microscale thermophoresis (MST) was used to characterize the affinity between DOPC vesicles (or NPs) and osmolytes. Our results show that osmolytes are capable of protecting SLBs from NP-induced disruption. Upon NP deposition onto supported vesicle layers (SVLs), the leakage of encapsulated dyes decreased with the addition of osmolytes. The combination of kosmotropes (TMAO and F - ) are more efficient than that of chaotropes (urea and NO 3 - ) in weakening the hydrophobic interaction between NPs and SLBs by preferential binding to NPs and/or SLBs., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Inc. All rights reserved.)

Most bacteria in natural and engineered environments grow and exist in biofilms. Recent investigations have shown that nanoparticles (NPs) interact with environmental biofilms, but these interactions are still not well characterized. Extracellular polymeric substances (EPS) are polymers secreted by bacteria to establish the functional and structural integrity of biofilms, and EPS porosity is a major contributor to NP access to and diffusion in biofilms. We used a synergistic combination of total internal reflection fluorescence microscopy and image correlation spectroscopy to monitor and map diffusion of fluorescent NPs in alginate yielding a detailed picture of the heterogeneous structure and connectivity of pores within a model EPS polymer. Using different sizes (20, 100, and 200 nm) of carboxylated polystyrene NPs, we examined how NP diffusive behaviors change as a result of calcium-induced cross-linking of the alginate matrix. This study reveals that cross-linking decreases NP diffusion coefficients and pore accessibility in an NP size-dependent manner and that NP movement through alginate matrices is anisotropic and heterogeneous. These results on heterogeneous and size-dependent movement within biofilms have important implications for future studies and simulations of NP-biofilm interactions.

Background: Nanomaterials (NMs) are often exposed to a broad range of biomolecules of different abundances. Biomolecule sorption driven by various interfacial forces determines the surface structure and composition of NMs, subsequently governs their functionality and the reactivity of the adsorbed biomolecules. Isothermal titration calorimetry (ITC) is a nondestructive technique that quantifies thermodynamic parameters through in-situ measurement of the heat absorption or release associated with an interaction., Scope of Review: This review highlights the recent applications of ITC in understanding the thermodynamics of interactions between various nanoparticles (NPs) and biomolecules. Different aspects of a typical ITC experiment that are crucial for obtaining accurate and meaningful data, as well as the strengths, weaknesses, and challenges of ITC applications to NP research were discussed., Major Conclusions: ITC reveals the driving forces behind biomolecule-NP interactions and the effects of the physicochemical properties of both NPs and biomolecules by quantifying the crucial thermodynamics parameters (e.g., binding stoichiometry, ΔH, ΔS, and ΔG). Complimentary techniques would strengthen the interpretation of ITC results for a more holistic understanding of biomolecule-NP interactions., General Significance: The thermodynamic information revealed by ITC and its complimentary characterizations is important for understanding biomolecule-NP interactions that are fundamental to the biomedical and environmental applications of NMs and their toxicological effects., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Surface-functionalized silver nanoparticles (AgNPs) are the most deployed engineered nanomaterials in consumer products because of their optical, antibacterial and electrical properties. Almost all engineered nanoparticles are coated with application-specific capping agents (i.e. organic/inorganic ligands on particle surface) to enhance their stability in suspension or increase their biocompatibility for biomedicine. The aim of this study was to investigate the contribution of the selected capping agents to their observed health impacts using realistic dose ranges. AgNPs capped with citrate, polyvinylpyrrolidone (PVP) and tannic acid were studied with human bronchoalveolar carcinoma (A549) and human colon adenocarcinoma (Caco-2) cell lines and compared against exposures to Ag ions. Cellular uptake and cytotoxicity were evaluated up to 24 h. Tannic acid capped AgNPs induced higher cellular uptake and rate in both cell lines. Citrate-capped and PVP-capped AgNPs behaved similarly over 24 h. All three of the capped AgNPs penetrated more into the A549 cells than Caco-2 cells. In contrast, the uptake rate of Ag ions in Caco-2 cells (0.11 ± 0.0001 µg h(-1) ) was higher than A549 cells (0.025 ± 0.00004 µg h(-1) ). The exposure concentration of 3 mg l(-1) is below the EC50 value for all of the AgNPs; therefore, little cytotoxicity was observed in any experiment conducted herein. Exposure of Ag ions, however, interrupted cell membrane integrity and cell proliferation (up to 70% lysed after 24 h). These findings indicate cellular uptake is dependent on capping agent, and when controlled to realistic exposure concentrations, cellular function is not significantly affected by AgNP exposure., (Copyright © 2015 John Wiley & Sons, Ltd.)

Bacteria are essential components of all natural and many engineered systems. The most active fractions of bacteria are now recognized to occur as biofilms, where cells are attached and surrounded by a secreted matrix of "sticky" extracellular polymeric substances. Recent investigations have established that significant accumulation of nanoparticles (NPs) occurs in aquatic biofilms. These studies point to the emerging roles of biofilms for influencing partitioning and possibly transformations of NPs in both natural and engineered systems. While attached biofilms are efficient "sponges" for NPs, efforts to elucidate the fundamental mechanisms guiding interactions between NPs and biofilms have just begun. In this mini review, special attention is focused on NP-biofilm interactions within the aquatic environment. We highlight key physical, chemical, and biological processes that affect interactions and accumulation of NPs by bacterial biofilms. We posit that these biofilm processes present the likely possibility for unique biological and chemical transformations of NPs. Ultimately, the environmental fate of NPs is influenced by biofilms, and therefore requires a more in-depth understanding of their fundamental properties.

The understanding of nano-sized particle separation processes has been limited by difficulties of nanoparticle characterization. In this study, nanoparticle tracking analysis (NTA) was deployed to evaluate the absolute particle size distributions in laboratory scale flocculation and filtration experiments with silver nanoparticles. The results from NTA were consistent with standard theories of particle destabilization and transport. Direct observations of changes in absolute particle size distributions from NTA enhance both qualitative and quantitative understanding of particle separation processes of nano-sized particles.

As nanoparticles (NPs) enter into biological systems, they are immediately exposed to a variety and concentration of proteins. The physicochemical interactions between proteins and NPs are influenced by the surface properties of the NPs. To identify the effects of NP surface heterogeneity, the interactions between bovine serum albumin (BSA) and gold NPs (AuNPs) with similar chemical composition but different surface structures were investigated. Different interaction modes and BSA conformations were studied by dynamic light scattering, circular dichroism spectroscopy, fluorescence quenching and isothermal titration calorimetry (ITC). Depending on the surface structure of AuNPs, BSA seems to adopt either a "side-on" or an "end-on" conformation on AuNPs. ITC demonstrated that the adsorption of BSA onto AuNPs with randomly distributed polar and nonpolar groups was primarily driven by electrostatic interaction, and all BSA were adsorbed in the same process. The adsorption of BSA onto AuNPs covered with alternating domains of polar and nonpolar groups was a combination of different interactions. Overall, the results of this study point to the potential for utilizing nanoscale manipulation of NP surfaces to control the resulting NP-protein interactions.

Surface heterogeneity plays an important role in controlling colloidal phenomena. This study investigated the self-aggregation and bacterial adsorption of self-assembled monolayer coated gold nanoparticles (AuNPs) with different surface compositional and structural heterogeneity. Evaluation was performed on AuNPs coated with (1) one ligand with charged terminals (MUS), (2) two homogeneously distributed ligands with respectively charged and nonpolar terminals (brOT) and (3) two ligands with respectively charged and nonpolar terminals with stripe-like distribution (OT). The brOT particles have less negative electrophoretic mobility (EPM) values, smaller critical coagulation concentration (CCC) and larger adsorption rate on Escherichia coli than that of AuNPs with homogeneously charged groups, in good agreement with DLVO predictions. Although the ligand composition on the surface of AuNPs is the same, OT particles have less negative EPM values and faster rate of bacterial adsorption, but much larger CCC compared to brOT. The deviation of OT particles from brOT and MUS in their self-aggregation behavior reflects the effects of surface heterogeneity on electrical double layer structures at the interface. Results from the present study demonstrated that, besides chemical composition, organization of ligands on particle surface is important in determining their colloidal stability.

Nanoparticles (NPs) in the biological environment are exposed to a large variety and concentration of proteins. Proteins are known to adsorb in a 'corona' like structure on the surface of NPs. In this study, we focus on the effects of surface compositional and structural heterogeneity on protein adsorption by examining the interaction of self-assembled monolayer coated gold NPs (AuNPs) with two types of proteins: ubiquitin and fibrinogen. This work was designed to systematically investigate the role of surface heterogeneity in nanoparticle-protein interaction. We have chosen the particles as well as the proteins to provide different types (in distribution and length-scale) of heterogeneity. The goal was to unveil the role of heterogeneity and of its length-scale in the particle-protein interaction. Dynamic light scattering and circular dichroism spectroscopy were used to reveal different interactions at pH above and below the isoelectric points of the proteins, which is related to the charge heterogeneity on the protein surface. At pH 7.4, there was only a monolayer of proteins adsorbed onto the NPs and the secondary structure of proteins remained intact. At pH 4.0, large aggregates of nanoparticle-protein complexes were formed and the secondary structures of the proteins were significantly disrupted. In terms of interaction thermodynamics, results from isothermal titration calorimetry showed that ubiquitin adsorbed differently onto (1) AuNPs with charged and nonpolar terminals organized into nano-scale structure (66-34 OT), (2) AuNPs with randomly distributed terminals (66-34 brOT), and (3) AuNPs with homogeneously charged terminals (MUS). This difference in adsorption behavior was not observed when AuNPs interacted with fibrinogen. The results suggested that the interaction between the proteins and AuNPs was influenced by the surface heterogeneity on the AuNPs, and this influence depends on the scale of surface heterogeneity and the size of the proteins.

Silver nanoparticles (AgNPs)-alginate composite beads were synthesized using three different approaches as filler materials of packed columns for simultaneous filtration-disinfection as an alternative portable water treatment process. The prepared composite beads were packed into a column through which Escherichia coli containing water was filtered to evaluate the disinfection efficacy. Excellent disinfection performance (no detectable viable colony) was achieved with a hydraulic retention time (HRT) as short as 1 min (the shortest tested) with the SGR (Simultaneous-Gelation-Reduction) and AR (Adsorption-Reduction) beads that were prepared using in situ reduction of Ag(+). Comparatively, the SGR beads released significantly less Ag(+)/AgNPs than the AR beads did within the same HRT. From the results of this study it was identified that SGR may be the best choice among all three different synthesis approaches in that the SGR beads can achieve satisfactory bactericidal performance with a relatively low material consumption rate., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Soluble in the extracellular matrix experience a crowded environment. However, most of the biophysical studies performed to date have focused on concentrations within the dilute regime (well below the mM range). Here, we systematically studied the interaction of model cell membrane systems (giant unilamellar vesicles and supported bilayers) with soluble globular , bovine serum albumin, and lysozyme at physiologically relevant concentrations. To mimic the extracellular environment more closely, we also used fetal bovine serum as a good representative of a biomimetic mixture. We found that regardless of the used (and thus of their biological function), the interactions between a model cell membrane and these are determined by their physico-chemical characteristics, mainly their dipolar character (or charged patches). In this paper we discuss the specificity and reversibility of these interactions and their potential implications on the living cells. In particular, we report initial evidence for an additional role of in cell membranes: that of reducing the effects of non-specific of soluble on the cell membrane.

As engineered nanoparticles (NPs) are increasingly used, their entry into the environment has become an important topic for water sustainability. Recent investigations point to the critical role of natural organic matter (NOM) in altering the persistence of NPs by complexing with their surfaces. The NP-NOM complex, in turn, is the new entity that may potentially influence subsequent fate of NPs. To understand the relative impact of humic (HA) and fulvic fraction of NOM on the stability and mobility of silver nanoparticles (AgNPs), a combination of dynamic light scattering and quartz crystal microgravimetry with dissipation monitoring was used. In the absence of unbound NOM, (1) surface modification on either AgNP or silica substrate by different NOM fractions could lead to substantial changes in the extent and kinetics of AgNP aggregation and deposition, and (2) HA has a greater capability to enhance the transport of AgNPs by reducing their aggregation and deposition. With unbound NOM, HA seems to compete more successfully for binding sites on the substrate under electrostatically favorable conditions and formed a steric layer to prevent subsequent deposition of AgNPs. These findings highlighted the importance of NOM fraction in the overall environmental partitioning of AgNPs.

Nanoparticulate metal sulfides such as ZnS can influence the transport and bioavailability of pollutant metals in anaerobic environments. The aim of this work was to investigate how the composition of dissolved natural organic matter (NOM) influences the stability of zinc sulfide nanoparticles as they nucleate and aggregate in water with dissolved NOM. We compared NOM fractions that were isolated from several surface waters and represented a range of characteristics including molecular weight, type of carbon, and ligand density. Dynamic light scattering was employed to monitor the growth and aggregation of Zn-S-NOM nanoparticles in supersaturated solutions containing dissolved aquatic humic substances. The NOM was observed to reduce particle growth rates, depending on solution variables such as type and concentration of NOM, monovalent electrolyte concentration, and pH. The rates of growth increased with increasing ionic strength, indicating that observed growth rates primarily represented aggregation of charged Zn-S-NOM particles. Furthermore, the observed rates decreased with increasing molecular weight and aromatic content of the NOM fractions, while carboxylate and reduced sulfur content had little effect. Differences between NOM were likely due to properties that increased electrosteric hindrances for aggregation. Overall, results of this study suggest that the composition and source of NOM are key factors that contribute to the stabilization and persistence of zinc sulfide nanoparticles in the aquatic environment.

In sulfidic aquatic systems, metal sulfides can control the mobility and bioavailability of trace metal pollutants such as zinc, mercury, and silver. Nanoparticles of ZnS and other metal sulfides are known to exist in oxic and anoxic waters. However, the processes that lead to their persistence in the aquatic environment are relatively unknown. The objective of this study was to evaluate the importance of dissolved natural organics in stabilizing nanoparticulate ZnS that precipitates under environmentally relevant conditions. Precipitation and growth of ZnS particles were investigated in the presence of dissolved humic acid and low-molecular weight organic acids that are prevalent in sediment porewater. Dynamic light scattering was used to monitor the hydrodynamic diameter of particles precipitating in laboratory solutions. Zn speciation was also measured by filtering the ZnS solutions (< 0.2 microm) and using anodic stripping voltammetry to confirm that Zn was coordinated to sulfide during the precipitation experiments and not to the dissolved organic ligands. X-ray photoelectron spectroscopy and electron microscopy were used to confirm that amorphous particles containing Zn and S were precipitating in the suspensions. Observed growth rates of ZnS particles varied by orders of magnitude, depending on the type and concentration of organic ligand in solution. In the presence of humic acid and thiol-containing ligands (cysteine, glutathione, and thioglycolate), observed growth rates decreased by 1-3 orders of magnitude relative to controls without the ligands. In contrast, growth rates of the particles were consistently within 1 order of magnitude of the ligand-free control when oxygen- and amine-containing ligands (oxalate, serine, and glycolate) were present Furthermore, particle growth rates decreased with an increase in thiol concentration and increased with NaNO3 electrolyte concentration. These studies suggest that specific surface interactions with thiol-containing organics may be one factor that contributes to the persistence of naturally occurring and anthropogenic nanoparticles of ZnS and other metal sulfides in the aquatic environment.

The presence of waterborne enteric pathogens in municipal water supplies contributes risk to public health. To evaluate the removal of these pathogens in drinking water treatment processes, previous researchers have spiked raw waters with up to 10(6) pathogens/L in order to reliably detect the pathogens in treated water. These spike doses are 6-8 orders of magnitude higher than pathogen concentrations routinely observed in practice. In the present study, experiments were conducted with different sampling methods (i.e., grab versus continuous sampling) and initial pathogen concentrations ranging from 10(1) to 10(6) pathogens/L. Results showed that Cryptosporidium oocyst and Giardia cyst removal across conventional treatment were dependent on initial pathogen concentrations, with lower pathogen removals observed when lower initial pathogen spike doses were used. In addition, higher raw water turbidity appeared to result in higher log removal for both Cryptosporidium oocysts and Giardia cysts.