Search

Here we report on the structural characterization and the hydrogen storage performance of naturally derived halloysite nanotubes (HNTs). HNTs were mined from different deposits in Australia and purified with different processes including crushing, blunging, reblunging, sedimentation and filtration. The clay materials were characterized by different techniques such as powder XRD, TGA, XPS, FTIR spectroscopy, SEM, TEM, and N₂ sorption. Characterization results revealed that they are highly porous in nature with tubular morphology and exhibited excellent thermal stability. Among the halloysite materials studied, HNT1 which is having higher halloysite content and less kaolinite exhibited hydrogen uptake of 0.5 wt.% at 1 bar and -196 °C, which is increased to 1.33 wt.% when the pressure raised to 48 bar. High hydrogen uptake was linked with the high surface area, hollow tubular aluminosilicate structure and the large interlayer spacing of the HNTs as they favour physisorption of hydrogen. It was also demonstrated that HNT1 is considered to be better material than some of the materials reported so far in terms of their cost-effectiveness and environmental safety for the hydrogen storage.

Highly ordered and three-dimensional (3-D) mesoporous carbon materials were prepared through a nano-hard templating approach using FDU-12 silica with tunable pore sizes as a template, which was synthesized via a microwave-assisted method. Powder XRD and microscopic techniques such as HR-TEM, HR-SEM, and N 2 adsorption-desorption techniques were employed to characterize the structure and textural properties of the prepared mesoporous carbon samples. The characterization results reveal that all the mesoporous carbon samples show a 3-D porous mesostructure with tunable pore diameters (5.7 to 9.4 nm) and a large specific surface area in the range from 451 to 1251 m 2 g -1 . The supercapacitive behavior of the cubic structured mesoporous carbons was determined using cyclic voltammetry, electrochemical impedance and charge-discharge measurements. The cubic mesoporous carbon materials exhibit a superior capacitive performance with a high specific capacitance value of 315.3 F g -1 at the current density of 1 A g -1 , which is much higher than that of hexagonally-ordered mesoporous carbon with large pore diameters, activated carbon, and carbon nanotubes. The materials also show excellent cyclic stability and extremely low resistance. The superior specific capacitance of these materials is attributed to the combination of excellent surface properties such as large specific surface area, large pore volume and uniform pore diameter, spherical morphology, and a 3-D porous system with cage-type pores., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Creating well-ordered nanoporosity in biomolecules promises stability and activity, offering access to an even wider range of application possibilities. Here, the preparation of nanoporous protein films containing cytochrome c protein molecules is reported through a soft-templating strategy using polystyrene (PS) spheres of different sizes as templates. The stability of the cytochrome c film is demonstrated through electrochemistry studies to show a reusable nature of these films over a long period of time. The size of the PS spheres is varied to tune the pore diameter and the thickness of the cytochrome c films, which are quite stable and highly selective for sensing toxic acidic vapors. The fusion of the templating strategy and the self-assembly of biomolecules may offer various possibilities by generating a new series of porous biomolecules including enzymes with different molecular weights and diameters, peptides, antibodies, and DNA with interesting catalytic, adsorption, sensing, and electronic properties., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A simple and efficient way to synthesize activated mesoporous biocarbons (AMBs) with extremely high BET surface area and large pore volume has been achieved for the first time through a simple solid state activation of freely available biomass, Arundo donax, with zinc chloride. The textural parameters of the AMB can easily be controlled by varying the activation temperature. It is demonstrated that the mesoporosity of AMB can be finely tuned with a simple adjustment of the amount of activating agent. AMB with almost 100% mesoporosity can be achieved using the activating agent and the biomass ratio of 5 and carbonization at 500 °C. Under the optimized conditions, AMB with a BET surface area of 3298 m 2 g -1 and a pore volume of 1.9 cm 3 g -1 can be prepared. While being used as an adsorbent for CO 2 capture, AMB registers an impressively high pressure CO 2 adsorption capacity of 30.2 mmol g -1 at 30 bar which is much higher than that of activated carbon (AC), multiwalled carbon nanotubes (MWCNTs), highly ordered mesoporous carbons, and mesoporous carbon nitrides. AMB also shows high stability with excellent regeneration properties under vacuum and temperatures of up to 250 °C. These impressive textural parameters and high CO 2 adsorption capacity of AMB clearly reveal its potential as a promising adsorbent for high-pressure CO 2 capture and storage application. Also, the simple one-step synthesis strategy outlined in this work would provide a pathway to generate a series of novel mesoporous activated biocarbons from different biomasses.

Highly ordered mesoporous carbon nitrides (MCN) with 3D structure and a high nitrogen content are successfully prepared for the first time using "uncalcined" mesoporous silica template, KIT-6 and 3-amino-1,2,4-triazole as a single molecular carbon and nitrogen precursor. The prepared MCN with C and N stoichiometry of C 3 N 5 shows unique CN framework and exhibits the CO 2 capture capacity of 5.63 mmol g -1 at 273 K and 30 bar, which is higher than that of MCN with 2D structure and C 3 N 4 stoichiometry., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Mesoporous carbon nitrides (MCN) are fascinating materials with unique semiconducting and basic properties that are useful in many applications including photocatalysis and sensing. Most syntheses of MCN focus on creating theoretically predicted C 3 N 4 stoichiometry with a band gap of 2.7 eV using a nano-hard templating approach with triazine-based precursors. However, the performance of the MCN in semiconducting applications is limited to the MCN framework with a small band gap, which would be linked with the addition of more N in the CN framework, but this remains a huge challenge. Here, we report a precursor with high nitrogen content, 3-amino-1,2,4-triazole, that enables the formation of new and well-ordered 3D MCN with C 3 N 5 stoichiometry (MCN-8), which has not been predicted so far, and a low-band-gap energy (2.2 eV). This novel class of material without addition of any dopants shows not only a superior photocatalytic water-splitting performance with a total of 801 μmol of H 2 under visible-light irradiation for 3 h but also excellent sensing properties for toxic acids., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Mesoporous carbon nitrides (MCNs) with rod-shaped morphology and tunable nitrogen contents have been synthesized through a calcination-free method by using ethanol-washed mesoporous SBA-15 as templates at different carbonization temperatures. Carbon tetrachloride and ethylenediamine were used as the sources of carbon and nitrogen, respectively. The resulting MCN materials were characterized with low- and high-angle powder XRD, nitrogen adsorption, high-resolution (HR) SEM, HR-TEM, elemental analysis, X-ray photoelectron spectroscopy, and X-ray absorption near-edge structure techniques. The carbonization temperature plays a critical role in controlling not only the crystallinity, but also the nitrogen content and textural parameters of the samples, including specific surface area and specific pore volume. The nitrogen content of MCN decreases with a concomitant increase in specific surface area and specific pore volume, as well as the crystallinity of the samples, as the carbonization temperature is increased. The results also reveal that the structural order of the materials is retained, even after heat treatment at temperatures up to 900 °C with a significant reduction of the nitrogen content, but the structure is partially damaged at 1000 °C. The carbon dioxide adsorption capacity of these materials is not only dependent on the textural parameters, but also on the nitrogen content. The MCN prepared at 900 °C, which has an optimum BET surface area and nitrogen content, registers a carbon dioxide adsorption capacity of 20.1 mmol g -1 at 273 K and 30 bar, which is much higher than that of mesoporous silica, MCN-1, activated carbon, and multiwalled carbon nanotubes., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Correction for 'Mesoporous carbon nitrides: synthesis, functionalization, and applications' by Kripal S. Lakhi et al., Chem. Soc. Rev., 2017, DOI: .

Mesoporous carbon nitrides (MCNs) with large surface areas and uniform pore diameters are unique semiconducting materials and exhibit highly versatile structural and excellent physicochemical properties, which promote their application in diverse fields such as metal free catalysis, photocatalytic water splitting, energy storage and conversion, gas adsorption, separation, and even sensing. These fascinating MCN materials can be obtained through the polymerization of different aromatic and/or aliphatic carbons and high nitrogen containing molecular precursors via hard and/or soft templating approaches. One of the unique characteristics of these materials is that they exhibit both semiconducting and basic properties, which make them excellent platforms for the photoelectrochemical conversion and sensing of molecules such as CO 2 , and the selective sensing of toxic organic acids. The semiconducting features of these materials are finely controlled by varying the nitrogen content or local electronic structure of the MCNs. The incorporation of different functionalities including metal nanoparticles or organic molecules is further achieved in various ways to develop new electronic, semiconducting, catalytic, and energy harvesting materials. Dual functionalities including acidic and basic groups are also introduced in the wall structure of MCNs through simple UV-light irradiation, which offers enzyme-like properties in a single MCN system. In this review article, we summarize and highlight the existing literature covering every aspect of MCNs including their templating synthesis, modification and functionalization, and potential applications of these MCN materials with an overview of the key and relevant results. A special emphasis is given on the catalytic applications of MCNs including hydrogenation, oxidation, photocatalysis, and CO 2 activation.

Recently, mesoporous carbon nitride (MCN) has aroused extensive interest for its potential applications in organocatalysis, photo- and electrochemistry and CO2 capture. However, further surface functionalization of MCN for advanced nanomaterials and catalysis still remains very challenging. Here we show that acidic carboxyl groups can be smoothly introduced onto the surface of well-ordered MCN without annihilation between the introduced acid groups and MCN's inherent basic groups through a facile UV light oxidation method. The functionalization generates a novel bifunctional nanocatalyst which offers an enzyme-like catalytic performance in the one-pot deacetalization-Knoevenagel reaction of benzaldehyde dimethylacetal and malononitrile with 100% conversion and more than 99% selectivity due to the cooperative catalysis between the acid and base groups separated on the surface of the catalyst. The results provide a general method to create multifunctional nanomaterials and open new opportunities for the development of high efficient catalyst for green organic synthesis.

Novel mesoporous BN and BCN materials with cage type porous structure and spherical morphology have been synthesized using carbon nanocages with 3D porous structure as a template via an elemental substitution method at a low synthesis temperature. The obtained materials exhibit a large specific pore volume with uniform pore size distribution and the specific surface area ranging from 945 to 1023 m(2) g(-1).

The preparation of size-controllable Fe2O3 nanoparticles grown in nanoporous carbon with tuneable pore diameters is reported. These hybrid materials exhibit strong non-linear magnetic properties and a magnetic moment of approximately 229 emu g(-1), which is the highest value ever reported for nanoporous hybrids, and can be attributed to the nanosieve effect and the strong interaction between the nanoparticles and the carbon walls., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)