Search

Periodic superlattices constitute ideal structures to modulate the transport properties of two-dimensional materials. In this paper, we show that the tunneling magnetoresistance (TMR) in phosphorene can be tuned effectively through periodic magnetic modulation. Deltaic magnetic barriers are arranged periodically along the phosphorene armchair direction in parallel (PM) and anti-parallel magnetization (AM) fashion. The theoretical treatment is based on a low-energy effective Hamiltonian, the transfer matrix method and the Landauer-Büttiker formalism. We find that the periodic modulation gives rise to oscillating transport characteristics for both PM and AM configurations. More importantly, by adjusting the electrostatic potential appropriately we find Fermi energy regions for which the AM conductance is reduced significantly while the PM conductance keeps considerable values, resulting in an effective TMR that increases with the magnetic field strength. These findings could be useful in the design of magnetoresistive devices based on magnetic phosphorene superlattices., (© 2023 IOP Publishing Ltd.)

Based on a V-shaped microactuator with a pair of beams, modifications were made to the length and width of a microactuator to observe the effects. A theoretical approach and numerical characterization of the modified microactuator were performed. Its performance was compared to a similar microactuator with equal beam widths, and a V-shaped microactuator. The proposed microactuator, fed at 2 V, compared to the V-shaped actuator, showed a 370.48% increase in force, but a 29.8% decrease in displacement. The equivalent von Mises stress level increased (until 74.2 MPa), but was below the silicon ultimate stress. When the modified microactuator was applied to the proposed microgripper, compared to the case using a V-shaped actuator, the displacement between the jaws increased from 0.85 µm to 4.85 µm, the force from 42.11 mN to 73.61 mN, and the natural frequency from 11.36 kHz to 37.99 kHz; although the temperature increased, on average, from 42 °C up to 73 °C, it is not a critical value for many microobjects. The maximum equivalent von Mises stress was equal to 68.65 MPa. Therefore, it has been demonstrated that the new modified microactuator with damping elements is useful for the proposed microgripper of novel geometry, while a reduced area is maintained.