Search

Objectives: This study investigated the influence of prophylactic treatments and thermocycling on the marginal and internal veneering interface (tooth-veneer) as well as on the surface texture of ceramic veneers., Materials and Methods: A total of 32 extracted human premolars were restored with veneers made of lithium disilicate (LDS) or zirconia-reinforced lithium silicate (ZLS). An artificial aging of the specimens was conducted via five cycles of both thermocycling (5/55°C) and prophylactic treatment (powder air polishing or ultrasonic scaling). Changes in the marginal interface and in the surface texture were examined using confocal laser scanning microscopy. The internal interface and the microstructure were investigated using micro X-ray computed tomography., Results: Artificial aging resulted in a deepening of the marginal interface across all groups (mean height: 4.51-15.74 μm, maximum height: 10.42-22.71 μm, cross-section: 256.68-1525.84 μm², regardless of the veneer material or prophylaxis method. No change in surface texture was observed. The internal interface exhibited defects for all groups after artificial aging. ZLS showed cracks in five out of eight veneers after exposure to ultrasonic scaling and thermocycling., Conclusion: Ceramic veneers exhibited a high resistance to prophylactic measures in terms of surface durability, but a deepening of the marginal interface should be taken into account. With regard to the formation of cracks within the material, the use of ultrasonic scaling is not recommended for ZLS veneers., Clinical Relevance: The influence of artificial aging, including prophylactic treatments, plays a critical role in assessing longevity for veneers in defect-oriented and esthetic dentistry., Competing Interests: Declarations. Ethical approval: This study was approved by the institutional Ethics Committee at the Medical Faculty of the Leipzig University (286/18-ek). Informed consent: Not Applicable. Competing interests: The authors declare no competing interests., (© 2024. The Author(s).)

Objectives: Allomaternal care (AMC) is suggested to be energetically beneficial to mothers and costly to allomothers. However, among primates, AMC is a heterogeneous phenomenon and its implications are less clear especially in female dispersal species. Here, we investigated infant care in a female dispersal species, Phayre's leaf monkeys (Trachypithecus phayrei crepusculus), to evaluate whether mothers were constrained by infant care and benefitted energetically from AMC, whether AMC was energetically costly for allomothers and how maternal experience was associated with AMC., Materials and Methods: Data were collected via instantaneous focal animal sampling between 2004 and 2005 for juvenile and adult females (N = 18) from two groups at the Phu Khieo Wildlife Sanctuary, Thailand (440 h). We used generalized linear mixed models to determine how infant care during the first month after birth affected the time mothers and allomothers spent feeding, socializing, resting, and locomoting and how AMC varied., Results: In the first month, infants spent 26% of their time with an allomother. We found no differences in mothers' overall activity before versus after birth, although mothers fed significantly more and rested less when without their infant. Allomothers fed and rested less when with an infant. AMC varied between 0.0% and 20.5%, with immature females being most active., Discussion: Mothers appear to benefit energetically from AMC such that their overall activity after birth remained unchanged. Costs and benefits for allomothers seem to be variable. Some very active immature females may be benefitting from learning-to-mother. The overall low cost of AMC may facilitate a reciprocal social network among unrelated females., (© 2024 The Author(s). American Journal of Biological Anthropology published by Wiley Periodicals LLC.)

Early hominin species likely had access to open, grassy habitats where periodic reliance on underground storage organs (USOs) is hypothesized to have played a crucial dietary role. As the only living graminivorous primate today, geladas (Theropithecus gelada) provide a unique perspective for understanding the energetic consequences of seasonal consumption of USOs. Geladas rely heavily on above-ground grasses throughout the year, but when grass is seasonally less available, they feed more on USOs. To assess whether USOs fit the definition of fallback foods (i.e., foods that are difficult to access, less preferred, or both), we examined how foraging effort (measured via time spent feeding and moving) and energetic status (measured via urinary C-peptide) fluctuated during seasonal dietary changes in a population of wild geladas in the Simien Mountains National Park, Ethiopia. If, indeed, USOs are fallback foods, we predicted an increase in foraging effort and a decline in energetic status during the dry season, when geladas rely more heavily on USOs. We collected behavioral and physiological data from 13 adult gelada males across a 13-month period. As expected, we found that male geladas spent more time moving during drier months. However, counter to the hypothesis that USOs are fallback foods in geladas, urinary C-peptide concentrations were significantly higher during the dry season. We suggest that USOs may represent an energy-rich food item for geladas, but it remains unclear why USOs are not consumed year-round. Future work is needed to better understand seasonal variation in the availability, nutrient content, and digestibility of USOs. However, results indicate that exploiting USOs seasonally could have been a valuable dietary strategy for the evolutionary success of early hominins., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Objective: The influence of various aging protocols, representing and accelerating influences present in the dental context, on possible changes in the microstructure and mechanical properties of thermoplastics was investigated. In order to minimize the complexity of the systems, first pure polymers and then later the equivalent dental polymeric materials were analyzed., Materials and Methods: Pure polymers (Poly(methyl methacrylate) - PMMA, Polyoxymethylene homopolymer - POM-H, Polyether ether ketone - PEEK, Nylon 12 - PA12, Polypropylene - PP) were analyzed before as well as after applying different aging protocols relevant to the oral environment (ethanol, thermocycling, alkaline and acidic setting) by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The thermoanalytical parameters used were glass transition temperature (T g ), melting peak and crystallization peak temperature (T pm, T pc ) and decomposition behavior. In a second step selected commercially available dental products (Telio CAD - PMMA D , Zirlux Acetal - POM D , Juvora Natural Dental Disc - PEEK D ) aged by the protocol that previously showed strong effects were examined and additionally tested for changes in their Vickers and Martens hardness by Mann-Whitney-U test., Results: The combinations of pure polymers and viable aging protocols analyzed within this study were identified via TGA or DSC as PA12 & thermocycling, POM-H & denture cleanser/lactic acid/ethanol, PP & lactic acid. The dental polymeric materials PMMA D and POM D due to aging in lactic acid showed slight but significantly (p < 0.01) reduced Vickers and partly Martens hardness. PEEK showed the greatest material resistance within this study., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

This study presents the effects of treating polystyrene (PS) cell culture plastic with oxidoreductase enzyme laccase and the catechol substrates caffeic acid (CA), L-DOPA, and dopamine on the culturing of normal human epidermal melanocytes (NHEMs) and human embryonal carcinoma cells (NTERA-2). The laccase-substrate treatment improved PS hydrophilicity and roughness, increasing NHEM and NTERA-2 adherence, proliferation, and NHEM melanogenesis to a level comparable with conventional plasma treatment. Cell adherence dynamics and proliferation were evaluated. The NHEM endpoint function was quantified by measuring melanin content. PS surfaces treated with laccase and its substrates demonstrated the forming of polymer-like structures. The surface texture roughness gradient and the peak curvature were higher on PS treated with a combination of laccase and substrates than laccase alone. The number of adherent NHEM and NTERA-2 was significantly higher than on the untreated surface. The proliferation of NHEM and NTERA-2 correspondingly increased on treated surfaces. NHEM melanin content was enhanced 6-10-fold on treated surfaces. In summary, laccase- and laccase-substrate-modified PS possess improved PS surface chemistry/hydrophilicity and altered roughness compared to untreated and plasma-treated surfaces, facilitating cellular adherence, subsequent proliferation, and exertion of the melanotic phenotype. The presented technology is easy to apply and creates a promising custom-made, substrate-based, cell-type-specific platform for both 2D and 3D cell culture.

Group living may entail local resource competition (LRC) which can be reduced if the birth sex ratio (BSR) is biased towards members of the dispersing sex who leave the group and no longer compete locally with kin. In primates, the predicted relationship between dispersal and BSR is generally supported although data for female dispersal species are rare and primarily available from captivity. Here, we present BSR data for Phayre's leaf monkeys ( Trachypithecus phayrei crepusculus ) at the Phu Khieo Wildlife Sanctuary, Thailand ( N = 104). In this population, nearly all natal females dispersed, while natal males stayed or formed new groups nearby. The slower reproductive rate in larger groups suggests that food can be a limiting resource. In accordance with LRC, significantly more females than males were born (BSR 0.404 males/all births) thus reducing future competition with kin. This bias was similar in 2-year-olds (no sex-differential mortality). It became stronger in adults, supporting our impression of particularly fierce competition among males. To better evaluate the importance of BSR, more studies should report sex ratios throughout the life span, and more data for female dispersal primates need to be collected, ideally for multiple groups of different sizes and for several years.

For most herbivorous animals, group-living appears to incur a high cost by intensifying feeding competition. These costs raise the question of how gregariousness (i.e., the tendency to aggregate) could have evolved to such an extent in taxa such as anthropoid primates and ungulates. When attempting to test the potential benefits and costs, previous foraging models demonstrated that group-living might be beneficial by lowering variance in intake, but that it reduces overall foraging success. However, these models did not fully account for the fact that gregariousness has multiple experiences and can vary in relation to ecological variables and foraging competition. Here, we present an agent-based model for testing how ecological variables impact the costs and benefits of gregariousness. In our simulations, primate-like agents forage on a variable resource landscape while maintaining spatial cohesion with conspecifics to varying degrees. The agents' energy intake rate, daily distance traveled, and variance in energy intake were recorded. Using Morris Elementary Effects sensitivity analysis, we tested the sensitivity of 10 model parameters, of which 2 controlled gregarious behavior and 8 controlled food resources, including multiple aspects of temporal and spatial heterogeneity. We found that, while gregariousness generally increased feeding competition, the costs of gregariousness were much lower when resources were less variable over time (i.e., when calorie extraction was slow and resource renewal was frequent). We also found that maintaining proximity to other agents resulted in lower variance in energy intake when resources were more variable over time. Thus, it appears that the costs and benefits of gregariousness are strongly influenced by the temporal characteristics of food resources, giving insight into the pressures that shaped the evolution of sociality and group living, including in our own lineage., Competing Interests: The authors have no conflicts of interest., (© 2024 The Authors. Ecology and Evolution published by John Wiley & Sons Ltd.)

Objectives: Raising offspring imposes energetic costs, especially for female mammals. Consequently, seasons favoring high energy intake and sustained positive energy balance often result in a conception peak. Factors that may weaken this coordinated effect include premature offspring loss and adolescent subfertility. Furthermore, seasonal ingestion of phytochemicals may facilitate conception peaks. We examined these factors and potential benefits of a conception peak (infant survival and interbirth interval) in Phayre's leaf monkeys (Trachypithecus phayrei crepusculus)., Materials and Methods: Data were collected at Phu Khieo Wildlife Sanctuary, Thailand (78 conceptions). We estimated periods of high energy intake based on fruit and young leaf feeding and via monthly energy intake rates. Phytochemical intake was based on fecal progestin. We examined seasonality (circular statistics and cox proportional hazard models) and compared consequences of timing (infant survival and interbirth intervals, t-test, and Fisher exact test)., Results: Conceptions occurred in all months but peaked from May to August. This peak coincided with high fecal progestin rather than presumed positive energy balance. Primipara conceived significantly later than multipara. Neither infant survival nor interbirth intervals were related to the timing of conception., Discussion: Periods of high energy intake may not exist and would not explain the conception peak in this population. However, the presumed high intake of phytochemicals was tightly linked to the conception peak. Timing conceptions to the peak season did not provide benefits, suggesting that the clustering of conceptions may be a mere by-product of phytochemical intake. To confirm this conclusion, seasonal changes in phytochemical intake and hormone levels need to be studied more directly., (© 2023 The Authors. American Journal of Biological Anthropology published by Wiley Periodicals LLC.)

AbstractAnimals can form dominance relationships that vary from highly unequal, or despotic, to egalitarian, and this variation likely impacts the fitness of individuals. How and why these differences in relationships and fitness exist among groups, populations, and species has been the subject of much debate. Here, we investigated the influence of two major factors: (1) spatial resource distribution and (2) the presence or absence of winner-loser effects. To determine the effects of these factors, we built an agent-based model that represented 10 agents directly competing over food resources on a simple landscape. By varying the food distribution and using either asymmetry of strength or experience, we contrasted four scenarios from which we recorded attack decisions, fight outcomes, and individual energy intake to calculate dominance hierarchy steepness and energetic skew. Surprisingly, resource distribution and winner-loser effects did not have the predicted effects on hierarchy steepness. However, skew in energy intake arose when resources were distributed heterogeneously, despite hierarchy steepness frequently being higher in the homogeneous resource scenarios. Thus, this study confirms some decades-old predictions about feeding competition but also casts doubt on the ability to infer energetic consequences from observations of agonistic interactions.

Objectives: The aim of the current study is to investigate the influence of mechanical stress as well as cleaning agents on the performance of various polyether ether ketone (PEEK) inserts for implant-retained overdentures (IOD)., Materials and Methods: Three different standard PEEK inserts were subjected to rapid artificial aging through storage in chemical denture cleaning agents (acetic acid, sodium hypochlorite, or sparkling denture cleaner) as well as demineralized water. The pre-aged PEEK inserts were then placed in unilateral IOD and subjected to 200,000 chewing loads (5 kg ~ 50 N), with 5000 thermal cycles (5/55°C), and 1100 removal/insertion cycles (vertical movement 2 mm)., Results: For all the PEEK inserts, the retention forces decreased significantly with an increasing number of mechanical load cycles and after exposure to all the cleaning agents. PEEK inserts aged by exposure to chemical cleaning agents showed a significantly higher decline in retention force than the inserts stored in water. Confocal laser scanning microscopy indicated that the decline in retention force might be caused by wear on the internal insert surface in contact with the patrix., Conclusions: Within the limitations of this study, it can be concluded that the application of chemical cleaning agents accelerates the decline in the retention forces of PEEK retentive inserts in IODs., (© 2023 The Authors. Clinical Oral Implants Research published by John Wiley & Sons Ltd.)

Three-dimensional (3D)-printed occlusal splints are becoming more prevalent in the treatment of tooth substance loss due to their fast and cost-effective production. The purpose of this in vitro study was to investigate whether the mechanical properties (tensile strength-TS, modulus of elasticity in tension-ME, and Vickers hardness-HV) vary between the materials (printed dimethacrylate-based resins: Keyprint KeySplint soft-KEY, Luxaprint Ortho Plus-LUX, V-Print splint-VPR, printed methacrylate-based resins Freeprint splint 2.0-FRE, and milled methacrylate-based material, CLEAR splint-CLE), and the influence of aging processes (extraoral storage conditions and nightly or daily use) was examined. The printed methacrylate-based resins (FRE, LUX, and VPR) had much higher TS (43.7-48.5 MPa compared to 12.3-13.3 MPa), higher ME (2.01-2.37 GPa compared to 0.43-0.72 GPa), and higher HV (11.8-15.0 HV compared to 3.3-3.5 HV) than both of the methacrylate-based resins (KEY and CLE) after the production process. Although the TS, ME, and HV of the printed dimethacrylate resins (FRE, LUX, and VPR) decreased significantly under humid conditions with possibly elevated temperatures (thermocycling as well as 37 °C), these mechanical properties were significantly higher than both methacrylate-based resins (KEY and CLE). Therefore, printed dimethacrylate resins should be used rather than methacrylate-based resins for high expected masticatory forces, low wall thicknesses, or very long wearing times (≥6 months).

Background: this study aims to validate two occlusal-force-measuring devices by comparing them to a universal testing machine and assessing their reliability across various dental and prosthetic groups. The research comprised two parts: part 1 assessed the measurement accuracy of the Occlusal Force Meter GM 10 ® (OFM) (Morita, Nagano Keiki, Higashimagome, Ohta-ku, Tokyo, Japan) and a prototype (PRO) by comparing them to a calibrated universal testing machine (ZWICK). Part 2 involved analyzing the devices' reliability based on clinical bite force measurements from study participants., Results: both devices become more accurate and reliable compared to the ZWICK over time of usage. Additionally, higher deviation from the ZWICK can be observed for higher values of forces applied and vice versa for both devices. The PRO's intraoral alignment influences its mean values compared to the OFM in different dental and prosthetic groups., Conclusion: both devices had limitations and required quadratic function calibration, making them suitable only for progression measurements. The study concludes that both the OFM and PRO devices can measure occlusal forces with improved accuracy over time. Intraoral alignment should be considered. Their easy-to-use clinical application would allow a more widespread use of masticatory function diagnosis, which could indicate the need for treatment and improve treatment planning.

Denture prostheses are an ideal and extensive reservoir for microorganisms to attach to their surfaces. The aim of the study was to elucidate interactions between materials for the fabrication of denture bases and the attachment of microorganisms, focusing on respiratory pathogens and Candida species. Specimens (6 mm × 1 mm) with a standardized surface roughness (Sa = 0.1 µm) were prepared from heat-pressed polymethyl methacrylate (PMMA), CAD/CAM-processed PMMA, and CAD/CAM-processed polyether ether ketone (PEEK). The specimens were randomly placed in the vestibular areas of complete upper dentures in seven patients and were removed either after 24 h without any oral hygiene measures or after a period of four weeks. The microorganisms adherent to the surface of the specimens were cultivated and subsequently analyzed using mass spectrometry (MALDI-TOF). The means and standard deviations were calculated, and the data were analyzed using a two-way analysis of variance (ANOVA) and Tukey post-hoc test where appropriate (α = 0.05). There was a significant increase ( p ≤ 0.004) in the total bacterial counts (CFU/mL) between the first (24 h) and the second (four weeks) measurements. Regarding quantitative microbiological analyses, no significant differences between the various materials were identified. Respiratory microorganisms were detected in all samples at both measurement time points, with a large variance between different patients. Only after four weeks, Candida species were identified on all materials but not in all participants. Candida species and respiratory microorganisms accumulate on various denture base resins. While no significant differences were identified between the materials, there was a tendency towards a more pronounced accumulation of microorganisms on conventionally processed PMMA.

Chipping of implant-supported molar crowns (iSCs) is a frequently reported complication. This study aimed to investigate the in-vitro aging and fracture resistance of iSCs with a CAD/CAM resin composite veneer structure fabricated with the Rapid Layer Technology (RLT) approach. Eight iSCs per group were fabricated by using two different CAD/CAM resin composites (Shofu Block HC: SH; Grandio blocs: GB) for veneer structures, and zirconia (ZrO 2 ), polyetheretherketone (PEEK), and cobalt-chromium (CoCr; control) as framework materials. The surfaces to be bonded were sandblasted, cleaned in an ultrasonic bath, and a coupling agent was applied. A self-adhesive resin luting composite was used to adhesively lute the veneer structures to the frameworks. The crowns were semi-permanently cemented to the abutments. After storage in deionized water, iSCs were loaded in a chewing simulator (TCML, 10,000 thermal cycles 5 °C to 55 °C for 20 s, 1.2 million, loading force 50 N). Four ZrO 2 and one CoCr crown did not survive the TCML. The fracture force was determined after 24 h storage in deionized water and yielded values of ≥974 N. Lowest fracture forces were yielded in the PEEK-SH group in comparison to CoCr or ZrO 2 groups ( p ≤ 0.031). For identical framework materials, no significant influence of the veneering material was observed. All PEEK-GB frameworks fractured, and chipping occurred for ZrO 2 -SH and all CoCr frameworks. PEEK-SH and ZrO 2 -GB presented both chipping and framework fractures. Within the limitations of this in-vitro study, the RLT with a CAD/CAM resin composite veneer structure might be a promising approach to veneer iSCs. Yet, the choice of the CAD/CAM resin composite and of the framework material determine the fracture resistance.

The aim of the study was to investigate the retention behaviour (pull-off force include adhesive remnant index = ARI) as well as translucency of various temporary luting cements and use microstructure elucidation methods to formulate explanatory approaches to their mode of action. The retention force of the temporary luting cements Provicol QM Plus (P+), Provicol QM Aesthetic (Pae), Bifix Temp (BiT), and as a reference a glass ionomer cement Meron (M) with a direct (Structur 3/S3) or an indirect (Structure CAD/SCAD) resin-based composite restauration was investigated after accelerated aging (thermocycling). Additional investigation of the physical properties was performed regarding to translucency and surface free energy. The microstructure was evaluated by X-ray diffraction, thermogravimetric analysis, differential scanning calorimetry and micro X-ray computed tomography. All tested temporary luting cements showed different pull-off forces in the range between 3.0 and 16.8 N in combination with S3 or SCAD after thermocycling. Only BiT with S3 showed pull-off forces of 129.2 N and complete retention on the restoration (ARI = 0), which was significant (p < .001) to all other samples. High translucency (BiT > Pae > M > P+) was observed for materials with lower crystalline content and low residual mass (usally resulting from higher organic content). M showed the highest surface free energy with a predominantly polar fraction, while BiT had a predominantly dispersive fraction. The highest porosity was observed in the coronal region of the restoration. The results suggest that translucency of temporary luting cements can be increased with higher organic and lower cryristall content. All combinations of cements and temporary restorations (direct/indirect; with the exception of BiT/S3) showed pull-off forces below 17 N (equivalent to a weight force of ∼1.7 kg), which allows manual detachment of the restoration by the dentist., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Andreas Koenig reports financial support was provided by VOCO GmbH., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Objectives: The aim of this study was to investigate the influence of dental prophylaxis cleaning procedures and artificial aging on veneers in human teeth. The external marginal and internal tooth veneer as well as the restoration surfaces were examined., Material and Methods: Thirty-two extracted premolars were restored with resin-based composite (RBC) and polymer-infiltrated ceramic network (PICN) veneers. Artificial aging by alternating thermocycling and subsequent prophylaxis procedure (glycine-based powder air polishing or ultrasonic scaling) was conducted for five consecutive cycles. The external marginal interface was examined by height profile measurements and the internal interface was investigated using micro X-ray computed tomography. In addition, the surface texture of the veneer surface was analyzed using confocal laser scanning microscopy., Results: The application of both prophylaxis procedures resulted in a deepening of the marginal interface (10 µm ± 8 µm) for materials. Furthermore, the internal interface of PICN restorations showed marginal gaps after both treatments and artificial aging (16 µm ± 3 µm). In contrast to the RBC specimens, a significant increase in surface roughness was identified for PICN veneers after ultrasonic scaling., Conclusions: The marginal and internal interface regions in veneers fabricated from PICN and RBC were affected by prophylaxis procedures. Furthermore, it may result in increased veneer surface roughness, especially in PICN and after ultrasonic scaling, which might affect bioadhesion and longevity., Clinical Relevance: After dental prophylaxis procedures, examination of the marginal and the internal interface as well as the veneer surface provides a precise insight into damage mechanisms and offers an assessment of longevity., (© 2022. The Author(s).)

Objectives: The aim of this study was to compare composition, microstructure, and mechanical strength of current multilayer zirconia blanks., Methods: Bar shaped specimens were made from several layers of multilayer zirconia blanks (Cercon ht ML, Dentsply Sirona, US; Katana Zirconia YML, Kuraray, J;SHOFU Disk ZR Lucent Supra, Shofu, J; priti multidisc ZrO 2 Multi Translucent, Pritidenta, D; IPS e.max ZirCAD Prime, Ivoclar Vivadent, FL). Flexural strength was determined in a three-point bending test on extra-thin bars. X-ray diffraction (XRD) with Rietveld refinement was used to assess crystal structure and scanning electron microscopy (SEM) imaging to visualize the microstructure of each material and layer., Results: Mean flexural strength varied between 467.5 ± 97.5 MPa (top layer, IPS e.max ZirCAD Prime) and 898.0 ± 188.5 MPa (bottom layer, Cercon ht ML) with significant (p ≤ 0.055) differences between the individual layers. XRD indicated 5Y-TZP for enamel-layers, 3Y-TZP for dentine-layers, individual mixtures of 3Y-TZP, 4Y-TZP, or 5 Y-TZP for intermediate layers. SEM analysis showed grain sizes between approx. 0.15 and 4 µm. Grain size tended to decrease from top to bottom layers., Significance: The investigated blanks differ predominantly in the intermediate layers. In addition to dimensioning of restorations, the milling position in the blanks must also be taken into account when using multilayer zirconia as restorative material., (Copyright © 2023 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.)

A correct silanization time is essential for successful surface functionalization and sufficient bonding to dental ceramics. The shear bond strength (SBS) of lithium disilicate (LDS) and feldspar (FSC) ceramics and luting resin composite was investigated with respect to different silanization times, taking into account the physical properties of the individual surfaces. The SBS test was performed with a universal testing machine, and the fracture surfaces were evaluated by stereomicroscopy. The surface roughness of the prepared specimens was analyzed after etching. Changes in surface properties due to surface functionalization were evaluated by surface free energy (SFE) via contact angle measurement. Fourier transform infrared spectroscopy (FTIR) was used to determine the chemical binding. The roughness and SBS of the control group (no silane, etched) were higher for FSC than for LDS. Regarding the SFE, the dispersive fraction increased and the polar fraction decreased after silanization. FTIR confirmed the presence of silane on the surfaces. The SBS of LDS showed a significant increase from 5 to 15 s, depending on the silane and luting resin composite. For FSC, cohesive failure was observed for all samples. For LDS specimens, a silane application time of 15 to 60 s is recommended. Based on clinical conditions, no difference between the silanization times was observed for FSC specimens, indicating that etching alone produces sufficient bonding.

Introduction: This study examined Vickers hardness as well as surface characteristics of different computer-aided design/computer-aided manufacturing (CAD/CAM) resin composites prior to and after storage in various media., Materials and Methods: CAD/CAM resin composite blocks (Grandio Blocs (GB), Lava Ultimate (LU), Brilliant Crios (BC), Cerasmart (GC), Shofu Block HC (SB), Tetric CAD (TC), Luxacam Composite (LC); incl. different translucency variants) were prepared, polished and surface free energy was determined. The specimens were divided into four groups: dry conditions for 24 h (25 °C), demineralized water (37 °C), Pepsi Cola (37 °C) and 75% ethanol (37 °C). After seven and 28 days of storage, Vickers hardness was determined. Surface roughness was measured after the entire storage period., Results and Discussion: Vickers hardness was in the range of about 150 HV for GB, around 115 HV for LU, and 80-100 HV for BC, GC, SB, TC and LC. Only minor differences (total: 50.2 (6.4)-56.2 (3.2) mN/m) in surface free energy could be detected. No relationship was observed between surface free energy and filler content. However, a correlation between filler content and Vickers hardness was evident. Artificial aging caused a decrease of Vickers hardness (up to -40 HV or 35%) depending on storage media, duration and material. The changes in surface texture after immersion in different media were below a value of ΔSa = 0.015 µm., Conclusion: Artificial aging of CAD/CAM resin composites leads to a significant decrease of Vickers hardness for most materials, while only small changes in surface roughness were identified., (© 2023. The Author(s).)

In the study the influence of different dental technical tools on the surface temperature and phase composition of fixed dental prostheses (FDPs) made of yttria-partially stabilized zirconia polycrystals (3Y-/4Y-/5Y-PSZ) was investigated. FDPs were fabricated by using computer-aided manufacturing (CAM). The FDPs were treated with a contra-angle handpiece equipped with different burs and polishers. The resulting surface temperatures were measured with a thermographic camera, and the resulting phase transformations were investigated by X-ray diffraction and quantified by Rietveld refinement. Processing with burs resulted in no phase transformation, but a preferred orientation shift. Using coarse polisher induced a phase transformation to the rhombohedral phase, while fine polishers produced no relevant phase transformations and no preferred orientation shift. Compared to the monoclinic phase (ca. 9% theoretical volume increase), which is associated with low-temperature degradation (LTD), the rhombohedral phase is much more voluminous (ca. 15% theoretical volume increase) and distorted and, therefore, has a greater degradation potential.

Acid resistance of CAD/CAM resin composites. Erosion-related tooth surface loss is closely related to acid exposure, such as contact with acidic beverages or disease-related reflux. As a result, dental restorations in affected patients are also exposed to acids, which indicates that the performance and longevity of a dental restoration is impacted by the acid resistance of the individually employed restorative materials. However, unlike for ceramic materials, the acid resistance of CAD/CAM resin composites is not commonly evaluated by the manufacturers, and no standardised test methods have yet been established. Against this background, the present in vitro study aimed to examine the long-term resistance of CAD/CAM resin composites (Brilliant Crios, Cerasmart, Grandio blocs, Lava Ultimate, Shofu Block HC) against three acidic media (tonic water, acetic acid, hydrochloric acid) as well as demineralized water and to investigate potential damage mechanisms. Changes in surface roughness (Sa) were detected by confocal laser scanning microscopy (CLSM), and changes in surface hardness were measured using Vickers hardness (HV). The damage mechanisms were analysed by scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS) and micro X-ray computer tomography (µXCT). For each material, few changes in either Sa or HV were identified for at least one of the different media; for Cerasmart, the sharpest deterioration in surface properties was observed. SEM-EDS revealed leaching of barium, aluminium, and titanium from fillers in a 2 µm zone on the rough but not on the polished surface of the specimen. Within the limitations of the current study, it can be concluded that polished CAD/CAM resin composites can be recommended for clinical use in patients with erosive conditions.

This study evaluated the pull-off force between titanium abutments and zirconia crowns that were bonded using four different cements and two abutment heights (AHs). In total, 24 titanium abutments (3-mm AH: n = 12; 5-mm AH: n = 12; taper: 7.5 degrees) and 24 zirconia crowns were designed, manufactured, cemented with one of four dental cements (one temporary, two semi-permanent, one permanent), stored in water for 24 hours, and thermocycled (37,500 cycles, equal to ~4 years in vivo). The pull-off force needed to separate the abutment and crown in each combination was determined eight times per combination of cement type and abutment height. Statistical analysis was conducted at a significance level of P < .05. The permanent self-adhesive composite cement showed a high pull-off force with a risk for crown fracture (mean: 381 N for 3-mm AH; 617 N for 5-mm AH). In contrast, the temporary zinc-oxide cement showed frequent premature decementation after thermocycling (mean: 14 N with 3-mm AH; 28 N with 5-mm AH). Both semi-permanent methacrylate-based cements ranked between the other cements (mean: 31 N/37 N for 3-mm AH; 120 N/72 N for 5-mm AH). Statistically significant differences were found between all cements (ANOVA P < .001). The abutment heights differed significantly for all cements (P < .005) except for the temporary zinc-oxide cement. Methacrylate-based cements were the most reliable cements for semi-permanent mounting of zirconia crowns on titanium abutments. They provide sufficient retention to avoid unintended loosening and are weak enough to remove the crown without causing damage.

Objective: The aim of this study was to compare the fracture behavior of cantilever fixed dental prostheses (FDPs) fabricated from 3Y-TZP, 4Y-TZP, or 5Y-TZP zirconia., Method and Materials: Posterior cantilever FDPs (three groups, each n = 16) were digitally designed and milled. After sintering, eight specimens/group were stored in demineralized water for 72 hours; eight specimens/group were subjected to accelerated aging using chewing simulation with thermal cycling (1,200,000 × 50 N; 2 × 3,000 × 5°C/55°C; H2O, 2 minutes/cycle) and finally stored in demineralized water for 24 hours. The cantilever FDPs were then statically loaded to failure to determine fracture load. Phase transformation towards the monoclinic phase was controlled with x-ray diffractometry., Results: One failure was identified after accelerated aging in the 5Y-TZP group. Fracture load decreased with increasing yttria content and decreasing bending strength. Accelerated aging using chewing simulation with thermal cycling caused a significant decline in fracture load. All FDPs failed in the area of the prepared tooth and in proximity to the cantilever, where the largest bending moment occurred. The yttria content had no influence on the type of fracture. With increasing yttria content, the relation between deformation and fracture load decreased only slightly. On the surface of FDPs that had been subjected to chewing simulation, no phase transformation towards the monoclinic phase (eg, low temperature degradation) was detected., Conclusion: Within the limitations of a laboratory study, the data indicate that 3Y-, 4Y-, and 5Y-TZP may be employed as material for the fabrication of permanent posterior cantilever FDPs. However, more data are necessary to finally advocate the application of 5-Y-TZP. (Quintessence Int 2022;53:414-422; doi: 10.3290/j.qi.b2793243).

Significance: Reactive oxygen species (ROS) are well known to promote innate immune responses during and in the absence of microbial infections. However, excessive or prolonged exposure to ROS provokes innate immune signaling dysfunction and contributes to the pathogenesis of many autoimmune diseases. The relatively high basal expression of pattern recognition receptors (PRRs) in innate immune cells renders them prone to activation in response to minor intrinsic or extrinsic ROS misbalances in the absence of pathogens. Critical Issues: A prominent source of ROS are mitochondria, which are also major inter-organelle hubs for innate immunity activation, since most PRRs and downstream receptor molecules are directly located either at mitochondria or at mitochondria-associated membranes. Due to their ancestral bacterial origin, mitochondria can also act as quasi-intrinsic self-microbes that mimic a pathogen invasion and become a source of danger-associated molecular patterns (DAMPs) that triggers innate immunity from within. Recent Advances: The release of mitochondrial DAMPs correlates with mitochondrial metabolism changes and increased generation of ROS, which can lead to the oxidative modification of DAMPs. Recent studies suggest that ROS-modified mitochondrial DAMPs possess increased, persistent immunogenicity. Future Directions: Herein, we discuss how mitochondrial DAMP release and oxidation activates PRRs, changes cellular metabolism, and causes innate immune response dysfunction by promoting systemic inflammation, thereby contributing to the onset or progression of autoimmune diseases. The future goal is to understand what the tipping point for DAMPs is to become oxidized, and whether this is a road without return. Antioxid. Redox Signal . 36, 441-461.

Objectives: It seems to be commonly accepted that gestation length within the subfamily Colobinae lasts several weeks longer in the African tribe (Colobini) than in the Asian tribe (Presbytini) even though closely related taxa of similar body mass should have similar life histories. Suspecting problems with data provenance to cause the difference, we revisited the published records expecting similar gestation lengths in both tribes if based on vetted, accurate data., Materials and Methods: We compiled published gestation length data for Colobini and Presbytini, labeling them as "unspecified" (n = 16) if the primary reference could not be located, methods were not described, and/or conceptions, the beginning of gestation, were determined based on sporadic observations of mating. If conceptions were determined based on changing hormone levels or patterns of daily mating records, we labeled the data as "accurate" (n = 12). We analyzed the ln transformed data in a phylogenetic framework in relation to adult female body mass., Results: In the unspecified dataset, gestation length in the two tribes overlapped extensively and did not differ significantly. However, in the accurate dataset, gestation length was significantly shorter in Colobini (not longer, as previously assumed)., Discussion: Data provenance had a strong impact on the comparison, reversing the relationship in gestation length in the two sister tribes. It remains to be determined why gestation lengths differ, whether, relative to the other primates, Colobini have a shortened gestation or Presbytini a lengthened gestation, and whether similar differences exist in other closely related taxa. Addressing these questions will require additional, broader, comparative analyses., (© 2021 Wiley Periodicals LLC.)

New resin-based composites and resin-infiltrated ceramics are used to fabricate computer-aided design (CAD) and computer-aided manufacturing (CAM)-based restorations, although little information is available on the long-term performance of these materials. The aim of this investigation was to determine the effects of storage time (24 h, 90 days, 180 days) on the thermophysical properties of resin-based CAD/CAM materials. Thermogravimetric Analysis (TGA), differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA) were used in the study. TGA provided insight into the composition of the resin-based materials and the influence of internal plasticization and water sorption. Resin-based composites showed different decomposition, heat energy and mechanical behavior, which was influenced by storage time in water. Individual materials such as Grandio bloc showed lower influence of water storage while maintaining good mechanical properties.

The aim of this in vitro study was to analyse the performance of CAD/CAM resin-based composites for the fabrication of long-term temporary fixed dental prostheses (FDP) and to compare it to other commercially available alternative materials regarding its long-term stability. Four CAD/CAM materials [Structur CAD (SC), VITA CAD-Temp (CT), Grandio disc (GD), and Lava Esthetic (LE)] and two direct RBCs [(Structur 3 (S3) and LuxaCrown (LC)] were used to fabricate three-unit FDPs. 10/20 FDPs were subjected to thermal cycling and mechanical loading by chewing simulation and 10/20 FDPs were stored in distilled water. Two FDPs of each material were forwarded to additional image diagnostics prior and after chewing simulation. Fracture loads were measured and data were statistically analysed. SC is suitable for use as a long-term temporary (two years) three-unit FDP. In comparison to CT, SC featured significantly higher breaking forces (SC > 800 N; CT < 600 N) and the surface wear of the antagonists was (significantly) lower and the abrasion of the FDP was similar. The high breaking forces (1100-1327 N) of GD and the small difference compared to LE regarding flexural strength showed that the material might be used for the fabrication of three-unit FDPs. With the exception of S3, all analysed direct or indirect materials are suitable for the fabrication of temporary FDPs.

Background: The influence of typical manufacturing regimes for producing fixed dental prostheses (FDPs) from yttria partly-stabilized zirconia polycrystals (3Y/4Y/5Y-TZP) on the phase composition is quantified., Methods: Fixed dental prostheses (FDPs) were designed using a CAD process and machined from different Y-TZP blanks from two manufacturers differing in yttria contents. Subsequent to sintering, the FDPs were glaze fired and air-blasted using alumina particles. Phase composition was determined with X-ray diffraction and quantified with Rietveld refinement., Results: The blanks from VITA Zahnfabrik (VITA YZ HT, VITA YZ ST, VITA YZ XT) and Dental Direct (DD Bio ZX 2 , DD cube ONE, DD cube X 2 ) featured a rhombohedral portion with rather small crystallites and a small monoclinic portion for 3Y/4Y-TZPs, which increased after machining and disappeared after sintering. Glaze firing and air-blasting with alumina particles had no significant influence on the phase composition., Conclusion: The phase history of dental zirconia is revealed, which may have implications on further processing and aging of the FDP (e.g. low temperature degradation) in mouth.

Arthropods (insects, spiders, etc.) can fulfill major nutritional requirements for primates, particularly in terms of proteins, fats, vitamins, and minerals. Yet, for many primate species we know very little about the frequency and importance of arthropod consumption. Traditional methods for arthropod prey identification, such as behavioral observations and fecal dissections, offer limited taxonomic resolution and, as a result, underestimate true diversity. Metabarcoding arthropod DNA from primate fecal samples provides a promising but underused alternative. Here, we inventoried arthropod prey diversity in wild lemurs by sequencing two regions of the CO1 gene. Samples were collected opportunistically from 10 species of lemurs inhabiting three national parks in southern Madagascar using a combination of focal animal follows and live trapping. In total, we detected arthropod DNA in 98 of the 170 fecal samples analyzed. Although all lemur species included in these analyses showed evidence of arthropod consumption, those within the family Cheirogaleidae appeared to consume the highest frequency and diversity of arthropods. To our knowledge, this study presents the first evidence of arthropod consumption in Phaner pallescens, Avahi peyrierasi, and Propithecus verreauxi, and identifies 32 families of arthropods as probable food items that have not been published as lemur dietary items to date. Our study emphasizes the importance of arthropods as a nutritional source and the role DNA metabarcoding can play in elucidating an animal's diet., (© 2021 Wiley Periodicals LLC.)

The effect of dental technical tools on the phase composition and roughness of 3/4/5 yttria-stabilized tetragonal zirconia polycrystalline (3y-/4y-/5y-TZP) for application in prosthetic dentistry was investigated. Additionally, the X-ray diffraction methods of Garvie-Nicholson and Rietveld were compared in a dental restoration context. Seven plates from two manufacturers, each fabricated from commercially available zirconia (3/4/5 mol%) for application as dental restorative material, were stressed by different dental technical tools used for grinding and polishing, as well as by chewing simulation and thermocycling. All specimens were examined via laser microscopy (surface roughness) and X-ray diffraction (DIN EN ISO 13356 and the Rietveld method). As a result, the monoclinic phase fraction was halved by grinding for the 3y-TZP and transformed entirely into one of the tetragonal phases by polishing/chewing for all specimens. The tetragonal phase t is preferred for an yttria content of 3 mol% and phase t″ for 5 mol%. Mechanical stress, such as polishing or grinding, does not trigger low-temperature degradation (LTD), but it fosters a phase transformation from monoclinic to tetragonal under certain conditions. This may increase the translucency and deteriorate the mechanical properties to some extent.

The performance of dental resin-based composites (RBCs) heavily depends on the characteristic properties of the individual filler fraction. As specific information regarding the properties of the filler fraction is often missing, the current study aims to characterize the filler fractions of several contemporary computer-aided design/computer-aided manufacturing (CAD/CAM) RBCs from a material science point of view. The filler fractions of seven commercially available CAD/CAM RBCs featuring different translucency variants were analysed using Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray Spectroscopy (EDS), Micro-X-ray Computed Tomography (µXCT), Thermogravimetric Analysis (TG) and X-ray Diffractometry (XRD). All CAD/CAM RBCs investigated included midifill hybrid type filler fractions, and the size of the individual particles was clearly larger than the individual specifications of the manufacturer. The fillers in Shofu Block HC featured a sphericity of ≈0.8, while it was <0.7 in all other RBCs. All RBCs featured only X-ray amorphous phases. However, in Lava Ultimate, zircon crystals with low crystallinity were detected. In some CAD/CAM RBCs, inhomogeneities (X-ray opaque fillers or pores) with a size <80 µm were identified, but the effects were minor in relation to the total volume (<0.01 vol.%). The characteristic parameters of the filler fraction in RBCs are essential for the interpretation of the individual material's mechanical and optical properties.

The aim of the study was to investigate the effect of X-rays used in micro X-ray computer tomography (µXCT) on the mechanical performance and microstructure of a variety of dental materials. Standardised bending beams (2 × 2 × 25 mm 3 ) were forwarded to irradiation with an industrial tomograph. Using three-dimensional datasets, the porosity of the materials was quantified and flexural strength was investigated prior to and after irradiation. The thermal properties of irradiated and unirradiated materials were analysed and compared by means of differential scanning calorimetry (DSC). Single µXCT measurements led to a significant decrease in flexural strength of polycarbonate with acrylnitril-butadien-styrol (PC-ABS). No significant influence in flexural strength was identified for resin-based composites (RBCs), poly(methyl methacrylate) (PMMA), and zinc phosphate cement (HAR) after a single irradiation by measurement. However, DSC results suggest that changes in the microstructure of PMMA are possible with increasing radiation doses (multiple measurements, longer measurements, higher output power from the X-ray tube). In summary, it must be assumed that X-ray radiation during µXCT measurement at high doses can lead to changes in the structure and properties of certain polymers.

The performance of artificial nerve guidance conduits (NGC) in peripheral nerve regeneration can be improved by providing structures with multiple small channels instead of a single wide lumen. 3D-printing is a strategy to access such multi-channeled structures in a defined and reproducible way. This study explores extrusion-based 3D-printing of two-component hydrogels from a single cartridge printhead into multi-channeled structures under aseptic conditions. The gels are based on a platform of synthetic, anhydride-containing oligomers for cross-linking of gelatinous peptides. Stable constructs with continuous small channels and a variety of footprints and sizes were successfully generated from formulations containing either an organic or inorganic gelation base. The adjustability of the system was investigated by varying the cross-linking oligomer and substituting the gelation bases controlling the cross-linking kinetics. Formulations with organic N ‑methyl-piperidin-3-ol and inorganic K 2 HPO 4 yielded hydrogels with comparable properties after manual processing and extrusion-based 3D-printing. The slower reaction kinetics of formulations with K 2 HPO 4 can be beneficial for extending the time frame for printing. The two-component hydrogels displayed both slow hydrolytic and activity-dependent enzymatic degradability. Together with satisfying in vitro cell proliferation data, these results indicate the suitability of our cross-linked hydrogels as multi-channeled NGC for enhanced peripheral nerve regeneration.

In group-living species, integrating into a new social group after dispersal is an important life history milestone associated with physical and social challenges. Generally, this process seems to be accompanied by heightened glucocorticoid (GC) concentrations; however, most studies of physiological responses to group transfer have been conducted on species with despotic social relationships, where integrating individuals are often targets of frequent aggression. Here we present data on fecal glucocorticoid (fGC) concentrations during periods of unstable group membership for male woolly monkeys (Lagothrix lagotricha poeppigii), a species with extremely low rates of male-male aggression and generally tolerant male-male associations. We collected data on males in four study groups at the Tiputini Biodiversity Station, Ecuador, and observed three attempted transfer events, involving a total of four adult males, in one study group. We observed only three instances of overt aggression (chases) between males across the entire study period, though male display behaviors were more frequent. We tested whether rates of displays were higher during periods of unstable group membership using a generalized linear mixed model (LMM). We also examined whether male status, group stability, and the occurrence of intergroup encounters affected fGC concentrations using LMMs. Contrary to our predictions, rates of display behaviors were not higher during periods of unstable group membership. However, both transient/integrating males and those who were already group members showed elevated fGC concentrations during these unstable periods. Our results suggest that even in species with tolerant male-male relationships, the integration of unfamiliar individuals can provoke an increase in GCs., (© 2021 Wiley Periodicals LLC.)

Objectives: The goal of this study was to show the potential of the inexpensive macro photography technique for application in various fields of contemporary dental materials science. The method was used for studying surface characteristics for fractographic evaluation, topography analysis, and for the measurement of optical properties such as translucency and opalescence., Materials and Methods: The variable test setup consisted of a digital camera with macro or microscopic objectives (combined with a lens tube and an objective adapter). The distance between object surface and objectives was controlled by an automatic stacking unit with a software-controlled mobile object slide. The exposure was carried out by LED light sources and a standard illuminant (D55)., Results: Highly resolved pictures with fine details, high focal depth, flexible imaging by adjusting the illuminates in different angles, and the possibility of 3D topography imaging are the main reasons why macro photography proved to be a suitable imaging method for fractographic analyses. The automatic focal stacking technique was a powerful tool for imaging distinct topographies in high-resolution with nearly unlimited focal depth and 3D surface visualisation. Translucency as well as opalescence, measured with the macro photography produced differed from the measurements performed with a conventional spectrophotometer., Conclusions: The modular structure of the cost-effective macro photography setup enables diverse applications such as identification of material groups, fractography analysis, and 3D surface visualisation. Quantification of colour, translucency, as well as opalescence under condition of the microscopic scale requires further research., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Variation in the relationship between gestation length and body mass can arise because different types of tissue require varying amounts of energy to build, and not all species build such tissues in the same proportions. Given that a pregnant female has a finite amount of energy, trade-offs between investment in different tissues may occur. Here we examine if dental precocity accounts for variation in primate gestation length. If true, this could explain why folivorous species with precocial dentition have longer gestation lengths than predicted by neonatal brain and body mass. We compiled data on gestation length, neonate and adult female body and brain mass from the literature. We used published postcanine eruption schedules at 4 months of age and measured the total occlusal area as dental endowment to approximate dental precocity at birth. Species with embryonic delay in growth or altricial neonates were not considered because they represent grade shifts regarding gestation length. Consequently, our data were biased toward Simiiformes and Old World monkeys, specifically. We performed a phylogenetic generalized least squares regression (pGLS) of neonate brain mass in relation to neonate body mass, and a second pGLS with dental endowment as an additional predictor variable. Including dental endowment in the pGLS did not improve the model. Dental endowment did not systematically impact primate gestation length. Concordant with results from previous studies, this indicates that the energetically expensive period of tooth mineralization may occur postnatally. More data are required to examine if the results are typical across primates., (© 2020 American Association for Anatomy.)

Studies in multiple host species have shown that gut microbial diversity and composition change during pregnancy and lactation. However, the specific mechanisms underlying these shifts are not well understood. Here, we use longitudinal data from wild Phayre's leaf monkeys to test the hypothesis that fluctuations in reproductive hormone concentrations contribute to gut microbial shifts during pregnancy. We described the microbial taxonomic composition of 91 fecal samples from 15 females (n = 16 cycling, n = 36 pregnant, n = 39 lactating) using 16S rRNA gene amplicon sequencing and assessed whether the resulting data were better explained by overall reproductive stage or by fecal estrogen (fE) and progesterone (fP) concentrations. Our results indicate that while overall reproductive stage affected gut microbiome composition, the observed patterns were driven by reproductive hormones. Females had lower gut microbial diversity during pregnancy and fP concentrations were negatively correlated with diversity. Additionally, fP concentrations predicted both unweighted and weighted UniFrac distances, while reproductive state only predicted unweighted UniFrac distances. Seasonality (rainfall and periods of phytoprogestin consumption) additionally influenced gut microbial diversity and composition. Our results indicate that reproductive hormones, specifically progestagens, contribute to the shifts in the gut microbiome during pregnancy and lactation.

This paper investigates the development of the alkalinity and its impact on carbon steel reinforcement embedded in alkali-activated fly ashes (AAFA) and alkali-activated fly ashes with ten percentage mass (wt%) of blast furnace slag (AAFAS)-based materials (geopolymer-GP). The pH analysis of eluates indicates a remarkable decrease of alkalinity in AAFA and AAFAS in the first hours of the geopolymerization process. Phenolphthalein solution and pore solution tests on concretes also show a sharp decrease of alkalinity with increased Ca content in the binder due to carbonation. Micro X-ray computer tomography (µXCT) and electrochemical techniques indicate that the changed pH in the GP systems was accompanied by a decrease in the corrosion rates of steel reinforcement when compared to ordinary Portland cement (OPC) systems. In contrast to calcite and vaterite, which were detected in OPC and AAFAS after a carbonation process, only sodium carbonate natron was determined at lower levels in AAFA by X-ray diffraction (XRD).

The aim of the current study was to relate an artificial aging protocol for the analysis of dental materials to their clinical performance. 20 fixed interim restorations (crowns and fixed denture prostheses (FDPs)) fabricated from two commercially available resin-based composites (RBCs) and a previous clinical trial served as templates for the fabrication of duplicate restorations. Duplicates were subjected to artificial aging using thermal cycling and mechanical loading. Subsequent to wear analysis, templates and duplicates were loaded to fracture and were examined using thermal gravimetric analysis (TG) and differential scanning calorimetry (DSC). For both RBCs, a relevant uptake of water was identified, which was more pronounced in the duplicates. Tribological analyses indicated relevant signs of wear in both templates and duplicates. While qualitative analyses indicated macroscopically similar wear traces in templates and duplicates, data showed that wear of FDPs was underrated in the laboratory analyses. The results of the current study suggest that chewing simulation allows a proper estimation of aging processes in materials for the fabrication of fixed interim restorations. However, simulation parameters should be continuously improved using data derived from clinical settings to enhance the quality of the simulation protocols., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Objectives: Geophagy has several hypothesized functions, among them (1) detoxification of plant secondary compounds, for example, tannins, (2) buffering stomach pH to alleviate acidosis caused by high sugar intake, and (3) supplementing the diet with mineral nutrients. We tested these hypotheses in Nepal gray langurs (Semnopithecus schistaceus), a foregut fermenter for which fruits and leaves dominate the diet at different times of the year., Materials and Methods: We collected data on feeding time per food item for 21 unprovisioned adult langurs at Ramnagar, Nepal, for 1 year using instantaneous sampling (773 observation hours). We combined these data with relative sugar and tannin content of food items to estimate diet content. We collected rainfall data to distinguish the wet season (May-September) from the dry season (October-April). We collected soil samples from consumption and control sites to test for pH and sodium, potassium, magnesium, and calcium concentrations., Results: Langurs consumed soil from two sources: termite structures (in almost all months) and river banks and beds (mainly in the dry season). Soil feeding was not positively correlated with dietary tannin or sugar content (GLMM). Soil pH was not high enough to buffer stomach contents. Only sodium was significantly higher in consumed soil., Discussion: The most likely function of geophagy was the acquisition of sodium. This conclusion is consistent with reports for other animals. Buffering stomach pH, an often-suggested function for animals with ruminant-like digestion, was not supported. Detoxification, often proposed for animals with a diet high in secondary compounds, was also not supported., (© 2018 Wiley Periodicals, Inc.)

In several countries in northwestern Europe, the number of resident greylag geese (Anser anser) has increased by up to 20% a year over the last few decades. The increasing numbers of geese are causing problems in tourism and agriculture. The number of resident greylag geese visiting the Altmuehlsee lake, a recreational area in the south of Germany, has also increased, especially in June and July. However, the geese leave the lake again at the beginning of August. 30 adult greylag geese were banded with telemetry transmitters during molting at the Altmuehlsee lake to determine when the geese leave the lake in August and what structures they need in their winter habitat. The distances the greylag geese flew from their resting sites to foraging sites were calculated, as well as the size of their home ranges and the proportions of each habitat type in the home range. It was found that the greylag geese used small home ranges while rearing their young, and fed close to the water. After molting, the size of their home ranges increased. They fed on fields and meadows around the lake. In the winter habitat, the geese also had a small home range, and they preferred eating grain and corn and the availability of an open body of water. In addition, one group of geese remained in the city of Munich during the winter, benefiting from supplementary food from people. This information helps us to understand the different requirements of resident greylag geese. It can be used to inform management decisions aimed at preventing agricultural damage. Special goose areas can for example be designated for the different periods in a goose's life cycle., Competing Interests: The authors have declared that no competing interests exist.

Sexual bias is a hallmark in various diseases. This review evaluates sexual dimorphism in clinical and experimental coxsackievirus B3 (CVB3) myocarditis, and how sex bias in the experimental disease changes with increased age. Coxsackieviruses are major causes of viral myocarditis, an inflammation of the heart muscle, which is more frequent and severe in men than women. Young male mice infected with CVB3 develop heart-specific autoimmunity and severe myocarditis. Females infected during estrus (high estradiol) develop T-regulatory cells and when infected during diestrus (low estradiol) develop autoimmunity similar to males. During estrus, protection depends on estrogen receptor alpha (ERα), which promotes type I interferon, activation of natural killer/natural killer T cells and suppressor cell responses. Estrogen receptor beta has opposing effects to ERα and supports pro-inflammatory immunity. However, the sexual dimorphism of the disease is significantly ameliorated in aged animals when old females become as susceptible as males. This correlates to a selective loss of the ERα that is required for immunosuppression. Therefore, sex-associated hormones control susceptibility in the virus-mediated disease, but their impact can alter with the age and physiological stage of the individual.

The uneven representation of frugivorous mammals and birds across tropical regions - high in the New World, low in Madagascar and intermediate in Africa and Asia - represents a long-standing enigma in ecology. Several hypotheses have been proposed to explain these differences but the ultimate drivers remain unclear. Here, we tested the hypothesis that fruits in Madagascar contain insufficient nitrogen to meet primate metabolic requirements, thus constraining the evolution of frugivory. We performed a global analysis of nitrogen in fruits consumed by primates, as collated from 79 studies. Our results showed that average frugivory among lemur communities was lower compared to New World and Asian-African primate communities. Fruits in Madagascar contain lower average nitrogen than those in the New World and Old World. Nitrogen content in the overall diets of primate species did not differ significantly between major taxonomic radiations. There is no relationship between fruit protein and the degree of frugivory among primates either globally or within regions, with the exception of Madagascar. This suggests that low protein availability in fruits influences current lemur communities to select for protein from other sources, whereas in the New World and Old World other factors are more significant in shaping primate communities.

In species with strong male-male competition, access to females in multimale-multifemale groups is usually regulated via a dominance hierarchy. The highest ranking (alpha) male often has priority of access and sires most offspring. The alpha male can change in three basic ways: (i) a recent immigrant or a resident challenges and becomes the new alpha; (ii) formation of a new group; (iii) succession-becoming alpha after higher ranking males have left. When, in a given primate population, the alpha male changes in different ways, two questions arise: (a) which is the most successful tactic and (b) do male attributes, such as age, aggressiveness or propensity to commit infanticide, affect the outcome? We examined these questions in the seasonally breeding Nepal gray langurs (Semnopithecus schistaceus) at Ramnagar, where new alpha males were either recent immigrants or residents. Success was measured as alpha tenure, residency duration, and the number of offspring sired (paternity exclusion based on DNA analysis, 28 infants). We documented 12 alpha-male tenures across two multimale-multifemale groups between 1991 and 1997. The predominant mode of change was the immigrant tactic. Age had no effect perhaps because alpha males were among the youngest adult males in their group. As expected, infanticidal males performed similarly to non-infanticidal ones. Alpha tenure was highly variable and longer for immigrant alphas and hyper-aggressive ones. However, none of the tactics or attributes examined resulted in significantly longer residencies or more offspring, likely because of the timing of immigrations and stochastic effects (i.e., the number of conceptions occurring per alpha tenure). The influence of female mate choice on male reproductive success requires further investigation. Furthermore, it remains to be examined why resident alpha males-with their presumed better knowledge of their opponents -performed so poorly. Am. J. Primatol. 79:e22437, 2017. © 2015 Wiley Periodicals, Inc., (© 2015 Wiley Periodicals, Inc.)

Protein limitation has been considered a key factor in hypotheses on the evolution of life history and animal communities, suggesting that animals should prioritize protein in their food choice. This contrasts with the limited support that food selection studies have provided for such a priority in nonhuman primates, particularly for folivores. Here, we suggest that this discrepancy can be resolved if folivores only need to select for high protein leaves when average protein concentration in the habitat is low. To test the prediction, we applied meta-analyses to analyze published and unpublished results of food selection for protein and fiber concentrations from 24 studies (some with multiple species) of folivorous primates. To counter potential methodological flaws, we differentiated between methods analyzing total nitrogen and soluble protein concentrations. We used a meta-analysis to test for the effect of protein on food selection by primates and found a significant effect of soluble protein concentrations, but a non-significant effect for total nitrogen. Furthermore, selection for soluble protein was reinforced in forests where protein was less available. Selection for low fiber content was significant but unrelated to the fiber concentrations in representative leaf samples of a given forest. There was no relationship (either negative or positive) between the concentration of protein and fiber in the food or in representative samples of leaves. Overall our study suggests that protein selection is influenced by the protein availability in the environment, explaining the sometimes contradictory results in previous studies on protein selection. Am. J. Primatol. 79:e22550, 2017. © 2016 Wiley Periodicals, Inc., (© 2016 Wiley Periodicals, Inc.)

The increased expression of genes induced by type I interferon (IFN) is characteristic of viral infections and systemic lupus erythematosus (SLE). We showed that mitochondrial antiviral signaling (MAVS) protein, which normally forms a complex with retinoic acid gene I (RIG-I)-like helicases during viral infection, was activated by oxidative stress independently of RIG-I helicases. We found that chemically generated oxidative stress stimulated the formation of MAVS oligomers, which led to mitochondrial hyperpolarization and decreased adenosine triphosphate production and spare respiratory capacity, responses that were not observed in similarly treated cells lacking MAVS. Peripheral blood lymphocytes of SLE patients also showed spontaneous MAVS oligomerization that correlated with the increased secretion of type I IFN and mitochondrial oxidative stress. Furthermore, inhibition of mitochondrial reactive oxygen species (ROS) by the mitochondria-targeted antioxidant MitoQ prevented MAVS oligomerization and type I IFN production. ROS-dependent MAVS oligomerization and type I IFN production were reduced in cells expressing the MAVS-C79F variant, which occurs in 30% of sub-Saharan Africans and is linked with reduced type I IFN secretion and milder disease in SLE patients. Patients expressing the MAVS-C79F variant also had reduced amounts of oligomerized MAVS in their plasma compared to healthy controls. Together, our findings suggest that oxidative stress-induced MAVS oligomerization in SLE patients may contribute to the type I IFN signature that is characteristic of this syndrome., (Copyright © 2016, American Association for the Advancement of Science.)

In most group-living mammals, reproductive success declines with increasing age and increases with increasing rank. Such effects have mainly been studied in matrilineal and in "age positive" hierarchies, which are stable and in which high ranking females often outperform low ranking ones. These relationships are less well-understood in age-inversed dominance hierarchies, in which a female's rank changes over time. We analyzed demographic data of 2 wild, unprovisioned groups of gray langurs (Semnopithecus schistaceus) near Ramnagar, Nepal covering periods of 5 years each. Female rank was unstable and age-inversed. We measured reproductive success via birth rates (57 births), infant survival (proportion of infants surviving to 2 years) and number of offspring surviving to 2 years of age (successful births) for 3 age and 3 rank classes. We found that old females performed significantly worse than expected (birth rate P = 0.04; successful births P = 0.03). The same was true for low ranking females (P = 0.04, and P < 0.01, respectively). Infant survival was highest for young and middle-aged as well as for high and middle ranking females. Overall, the results for these unstable hierarchies were rather similar to those for stable hierarchies of other mammals, particularly several nonhuman primates. Compared to a provisioned population of a closely related species, the wild and unprovisioned population examined (i) showed stronger age effects, while (ii) female reproductive success was equally affected by rank. Future comparative studies are needed to examine whether captive or provisioned populations deviate predictably from wild populations., (© 2016 International Society of Zoological Sciences, Institute of Zoology/Chinese Academy of Sciences and John Wiley & Sons Australia, Ltd.)

Recent decades have seen rapid development of new analytical methods to investigate patterns of interspecific variation. Yet these cutting-edge statistical analyses often rely on data of questionable origin, varying accuracy, and weak comparability, which seem to have reduced the reproducibility of studies. It is time to improve the transparency of comparative data while also making these improved data more widely available. We, the authors, met to discuss how transparency, usability, and reproducibility of comparative data can best be achieved. We propose four guiding principles: 1) data identification with explicit operational definitions and complete descriptions of methods; 2) inclusion of metadata that capture key characteristics of the data, such as sample size, geographic coordinates, and nutrient availability (for example, captive versus wild animals); 3) documentation of the original reference for each datum; and 4) facilitation of effective interactions with the data via user friendly and transparent interfaces. We urge reviewers, editors, publishers, database developers and users, funding agencies, researchers publishing their primary data, and those performing comparative analyses to embrace these standards to increase the transparency, usability, and reproducibility of comparative studies., (© 2016 Wiley Periodicals, Inc.)

Objectives: Reproductive skew is proposed to link to despotism in dominance hierarchies. While studies illustrating male skew are plentiful, demonstrating the link to despotism is rare. Likewise, it is often unknown which factors (e.g., resource holding potential, age, physical condition) affect a male's dominance rank. Here we investigated correlates of male rank and hierarchy characteristics in Nepal gray langurs (Semnopithecus schistaceus), a population with high male reproductive skew, and compared the results to other multi-male groups of nonhuman primates., Methods: We collected dyadic displacement interactions from two groups (mean 3.0 and 4.1 adult males) for five years each. We assessed dominance ranks for demographically stable phases (n = 11, n = 28) and analyzed the effects of age and physical condition through linear mixed models (LMM). We analyzed hierarchy characteristics via the program MatMan. We used data from 27 primate groups (cercopithecines, colobines, hominoids) as a comparative sample., Results: The highest ranks were attained by adults in one group (LMM, P < 0.091) and by young adults in the other group (LMM, P < 0.001). With some exceptions, rank was highest for males with higher physical condition scores (LMM, P < 0.05). Hierarchies had high directional consistency (mean > 0.93) and linearity (mean >0.81) and were relatively steep (mean >0.66) when compared with other species., Discussion: Dominance rank followed a pattern predicted by resource holding potential, but other individual attributes and group composition also seemed important. As predicted, hierarchy characteristics indicated a despotic system in line with the strong reproductive skew. Across primates, however, the degree of despotism did not appear to match the degree of reproductive skew. Am J Phys Anthropol 160:208-219, 2016. © 2016 Wiley Periodicals, Inc., (© 2016 Wiley Periodicals, Inc.)

Enteroviruses are small, non-enveloped, positive-sense single-strand RNA viruses, and are ubiquitously found throughout the world. These viruses usually cause asymptomatic or mild febrile illnesses, but have a propensity to induce severe diseases including type 1 diabetes and pancreatitis, paralysis and neuroinflammatory disease, myocarditis, or hepatitis. This pathogenicity may result from induction of autoimmunity to organ-specific antigens. While enterovirus-triggered autoimmunity can arise from multiple mechanisms including antigenic mimicry and release of sequestered antigens, the recent demonstration of T cells expressing dual T cell receptors arising as a natural consequence of Theiler's virus infection is the first demonstration of this autoimmune mechanism., (Copyright © 2015 Elsevier B.V. All rights reserved.)