Search

This study aims to improve our understanding of the interaction between olfactory receptors and odorants to develop highly selective biosensing devices. Natural nanovesicles (NVs) from Saccharomyces cerevisiae, ~100 nm in diameter, carrying either the human OR17-40 or the chimpanzee OR7D4 olfactory receptor (OR) tagged with the c-myc epitope at their N-terminus, are presented as model systems to quantify the interaction between odorant and olfactory receptors. The level of expression of olfactory receptors was determined at individual NVs using a novel competitive ELISA immunoassay comparing the values obtained against those from techniques involving the solubilization of cell membrane proteins and the identification of c-myc-carrying receptors. Surface Plasmon Resonance (SPR) measurements on L1 Biacore chips indicate that cognate odorants bind to their Ors, thereby quantifying the approximate number of odorants that interact with a given olfactory receptor. The selectivity of OR17-40-carrying NVs towards helional and OR7D4-carrying NVs towards androstenone has been proven in cross-check experiments with non-specific odorant molecules (heptanal and pentadecalactone, respectively) and in control receptors.

Analytical ultracentrifugation (AUC) is a powerful tool for the study of particle size distributions and interactions with high accuracy and resolution. In this work, we show how the analysis of sedimentation velocity data from the AUC can be used to characterize nanocarrier drug delivery systems used in nanomedicine. Nanocarrier size distribution and the ratio of free versus nanoparticle-encapsulated drug in a commercially available liposomal doxorubicin formulation are determined using interference and absorbance based AUC measurements and compared with results generated with conventional techniques. Additionally, the potential of AUC in measuring particle density and the detection of nanocarrier sub-populations is discussed as well. The unique capability of AUC in providing reliable data for size and composition in a single measurement and without complex sample preparation makes this characterization technique a promising tool both in nanomedicine product development and quality control., (Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.)

Peptide-lipid interactions support a variety of biological functions. Of particular interest are those that underpin fundamental mechanisms of innate immunity that are programmed in host defense or antimicrobial peptide sequences found virtually in all multicellular organisms. Here we synthetically modulate antimicrobial peptide-lipid interactions using an archetypal helical antimicrobial peptide and synthetic membranes mimicking bacterial and mammalian membranes in solution. We probe these interactions as a function of membrane-induced folding, membrane stability and peptide-lipid ratios using a correlative approach encompassing light scattering and spectroscopy measurements such as circular dichroism spectroscopy, fluorescence and nuclear magnetic resonance spectroscopy. The peptide behavior is assessed against that of its anionic counterpart having similar propensities for α-helical folding. The results indicate strong correlations between peptide folding and membrane type, supporting folding-responsive binding of antimicrobial peptides to bacterial membranes. The study provides a straightforward approach for modulating structure-activity relationships in the context of membrane-induced antimicrobial action, thus holding promise for the rational design of potent antimicrobial agents.

The spread of bacterial resistance to traditional antibiotics continues to stimulate the search for alternative antimicrobial strategies. All forms of life, from bacteria to humans, are postulated to rely on a fundamental host defense mechanism, which exploits the formation of open pores in microbial phospholipid bilayers. Here we predict that transmembrane poration is not necessary for antimicrobial activity and reveal a distinct poration mechanism that targets the outer leaflet of phospholipid bilayers. Using a combination of molecular-scale and real-time imaging, spectroscopy and spectrometry approaches, we introduce a structural motif with a universal insertion mode in reconstituted membranes and live bacteria. We demonstrate that this motif rapidly assembles into monolayer pits that coalesce during progressive membrane exfoliation, leading to bacterial cell death within minutes. The findings offer a new physical basis for designing effective antibiotics.

Cell membrane proteins are involved in a variety of biochemical pathways and therefore constitute important targets for therapy and development of new drugs. Bioanalytical platforms and binding assays using these membrane protein receptors for drug screening or diagnostic require the construction of well-characterized liposome and lipid bilayer arrays that act as support to prevent protein denaturation during biochip processing. Quantification of the protein receptors in the lipid membrane arrays is a key issue in order to produce reproducible and well-characterized chips. Herein, we report a novel immunochemical analytical approach for the quantification of membrane proteins (i.e., G-protein-coupled receptor, GPCR) in nanovesicles (NVs). The procedure allows direct determination of tagged receptors (i.e., c-myc tag) without any previous protein purification or extraction steps. The immunochemical method is based on a microplate ELISA format and quantifies this tag on proteins embedded in NVs with detectability in the picomolar range, using protein bioconjugates as reference standards. The applicability of the method is demonstrated through the quantification of the c-myc-olfactory receptor (OR, c-myc-OR1740) in the cell membrane NVs. The reported method opens the possibility to develop well-characterized drug-screening platforms based on G-coupled proteins embedded on membranes., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Asymmetric Flow Field-Flow Fractionation (AF4) combined with multidetector analysis form a promising technique in the field of nanoparticle characterization. This system is able to measure the dimensions and physicochemical properties of nanoparticles with unprecedented accuracy and precision. Here, for the first time, this technique is optimized to characterize the interaction between an archetypal antimicrobial peptide and synthetic membranes. By using charged and neutral liposomes it is possible to mimic some of the charge characteristics of biological membranes. The use of AF4 system allows determining, in a single analysis, information regarding the selectivity of the peptides, the quantity of peptides bound to each liposome, the induced change in the size distribution and morphology of the liposomes. The results obtained provide relevant information for the study of structure-activity relationships in the context of membrane-induced antimicrobial action. This information will contribute to the rational design of potent antimicrobial agents in the future. Moreover, the application of this method to other liposome systems is straightforward and would be extremely useful for a comprehensive characterization with regard to size distribution and protein interaction in the nanomedicine field., (Copyright © 2015. Published by Elsevier B.V.)

Changing abruptly the potential between a scanning tunneling microscope tip and a graphite substrate induces "high-conductance" spots at the molecular level in a monolayer formed by a manganese chloride-porphyrin molecule. These events are attributed to the pulse-induced formation of μ-oxo-porphyrin dimers. The pulse voltage must pass a certain threshold for dimer formation, and pulse polarity determines the yield.

Manganese porphyrins have been extensively investigated as model systems for the natural enzyme cytochrome P450 and as synthetic oxidation catalysts. Here, we report single-molecule studies of the multistep reaction of manganese porphyrins with molecular oxygen at a solid/liquid interface, using a scanning tunnelling microscope (STM) under environmental control. The high lateral resolution of the STM, in combination with its sensitivity to subtle differences in the electronic properties of molecules, allowed the detection of at least four distinct reaction species. Real-space and real-time imaging of reaction dynamics enabled the observation of active sites, immobile on the experimental timescale. Conversions between the different species could be tuned by the composition of the atmosphere (argon, air or oxygen) and the surface bias voltage. By means of extensive comparison of the results to those obtained by analogous solution-based chemistry, we assigned the observed species to the starting compound, reaction intermediates and products.

This article describes a study of the outcome of racemate condensation in different types of monolayers. The study was performed on a resorcinol surfactant bearing an octadecyl chain and a lactate group which formed a monolayer at the interface of graphite and 1-phenyloctane as well as a Langmuir film at the air-water interface. Control experiments with the enantiopure materials provided the characteristics of the chiral organizations. The results obtained on the racemate show that on graphite the molecule forms chiral domains, indicating that spontaneous resolution takes place at the surface, a phenomenon that has been rationalized using molecular modeling. The X-ray crystal structure of the DMSO solvate of one of the enantiomers shows a similar type of packing to this monolayer. On the other hand, in the Langmuir layer it appears that the formation of a racemic compound is favoured, as it is in the solid state in three dimensions. The work shows how the symmetry restrictions in different environments can have a critical influence on the outcome of racemate organization, and underline the tendency of graphite to favour symmetry breaking in monolayers formed at its surface., (Copyright © 2011 Wiley Periodicals, Inc.)

The direct coupling of complex, functional organic molecules at a surface is one of the outstanding challenges in the road map to future molecular devices. Equally demanding is to meet this challenge without recourse to additional functionalization of the molecular building blocks and via clean surface reactions that leave no surface contamination. Here, we demonstrate the directional coupling of unfunctionalized porphyrin molecules--large aromatic multifunctional building blocks--on a single crystal copper surface, which generates highly oriented one-dimensional organometallic macromolecular nanostructures (wires) in a reaction which generates gaseous hydrogen as the only byproduct. In situ scanning tunneling microscopy and temperature programmed desorption, supported by theoretical modeling, reveal that the process is driven by C-H bond scission and the incorporation of copper atoms in between the organic components to form a very stable organocopper oligomer comprising organometallic edge-to-edge porphyrin-Cu-porphyrin connections on the surface that are unprecedented in solution chemistry. The hydrogen generated during the reaction leaves the surface and, therefore, produces no surface contamination. A remarkable feature of the wires is their stability at high temperatures (up to 670 K) and their preference for 1D growth along a prescribed crystallographic direction of the surface. The on-surface formation of directional organometallic wires that link highly functional porphyrin cores via direct C-Cu-C bonds in a single-step synthesis is a new development in surface-based molecular systems and provides a versatile approach to create functional organic nanostructures at surfaces., (© 2011 American Chemical Society)

A synthetic strategy was developed for the preparation of porphyrins containing between one and four stereogenic centers, such that their molecular weights vary only as a result of methyl groups which give the chiral forms. The low-dimensional nanoscale aggregates of these compounds reveal the profound effects of this varying molecular chirality on their supramolecular structure and optical activity. The number of stereogenic centers influences significantly the self-assembly and chiral structure of the aggregates of porphyrin molecules described here. A scanning tunneling microscopy study of monolayers on graphite shows that the degree of structural chirality with respect to the surface increases almost linearly with the number of stereogenic centers, and only one handedness is formed in the monolayers, whereas the achiral compound forms a mixture of mirror-image domains at the surface. In solution, four hydrogen bonds induce the formation of an H-aggregate, and circular dichroism measurements and theoretical studies indicate that the compounds self-assemble into helical structures. Both the chirality and stability of the aggregates depend critically on the number of stereocenters. The chiral porphyrin derivatives gelate methylcyclohexane at concentrations dependent on the number and position of chiral groups at the periphery of the aromatic core, reflecting the different aggregation forces of the molecules in solution. Increasing the number of stereogenic centers requires more material to immobilize the solvent, in all likelihood because of the greater solubility of the porphyrins. The vibrational circular dichroism spectra of the gels show that all compounds have a chiral environment around the amide bonds, confirming the helical model proposed by calculations. The morphologies of the xerogels (studied by scanning electron microscopy and scanning force microscopy) are similar, although more fibrous features are present in the molecules with fewer stereogenic centers. Importantly, the presence of only one stereogenic center, bearing a methyl group as the desymmetrizing ligand, in a molecule of considerable molecular weight is enough to induce single-handed chirality in both the one- and two-dimensional supramolecular self-assembled structures.

The chiral organization of an enantiopure functional molecule on an achiral surface has been studied with the aim of understanding the influence of stereogenic centers on the self-assembly in two dimensions. A chiral tetra meso-amidophenyl-substituted porphyrin containing long hydrophobic tails at the periphery of the conjugated pi-electron system was prepared for this purpose. Scanning tunneling microscopy (STM) images of the compound at the graphite-heptanol interface reveal a chiral arrangement of the molecules, with the porphyrin rows tilted by 13 degrees with respect to the normal to the graphite axes. In terms of molecular modeling, a combination of molecular dynamics simulations on systems constrained by periodic boundary conditions and on unconstrained large molecular aggregates has been applied to reach a quantitative interpretation on both the density of the layer and its orientation with respect to the graphite surface. The results show clearly that (i) the methyl groups of the stereogenic point toward the graphite surface and (ii) the porphyrin molecules self-assemble into an interdigitated structure where the alkyl chains align along one of the graphite axes and the porphyrin cores are slightly shifted with respect to one another. The direction of this shift, which defines the chirality of the monolayer, is set by the chirality of the stereogenic centers. Such an arrangement results in the formation of a dense chiral monolayer that is further stabilized by hydrogen bonding with protic solvents.

Deposition of a porphyrin onto metallic copper followed by heating leads to an unprecedented type of linking of the molecules giving a mixture of covalent multiporphyrin nanostructures at the surface.