Search

We report the synthesis of a novel class of metal-complexing peptide-based polymers, which we name HyperMAPs (Hyper-loaded MetAl-complexed Polymers). The controlled solid-phase synthesis of HyperMAPs' scaffold peptide provides our polymer with a well-defined molecular structure that allows for an accurate on-design assembly of a wide variety of metals. The peptide-scaffold features a handle for direct conjugation to antibodies or any other biomolecules by means of a thiol-maleimide-click or aldehyde-oxime reaction, a fluorogenic moiety for biomolecule conjugation tracking, and a well-defined number of functional groups for direct incorporation of metal-chelator complexes. Since metal-chelator complexes are prepared in a separate reaction prior to incorporation to the peptide scaffold, polymers can be designed to contain specific ratios of metal isotopes, providing each polymer with a unique CyTOF spectral fingerprint. We demonstrate the complexing of 21 different metals using two different chelators and provide evidence of the application of HyperMAPs on a 13 parameter CyTOF panel and compare its performance to monoisotopic metal-conjugated antibodies., Competing Interests: Declaration of Competing Interest The authors declare no conflict of interest., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Trapped ion mobility spectrometry-time-of-flight mass spectrometry (TIMS-TOFMS) has emerged as a tool to study protein conformational states. In TIMS, gas-phase ions are guided across the IM stages by applying direct current (DC) potentials (D1-6), which, however, might induce changes in protein structures through collisional activation. To define conditions for native protein analysis, we evaluated the influence of these DC potentials using the metalloenzyme bovine carbonic anhydrase (BCA) as primary test compound. The variation of DC potentials did not change BCA-ion charge and heme content but affected (relative) charge-state intensities and adduct retention. Constructed extracted-ion mobilograms and corresponding collisional cross-section (CCS) profiles gave useful insights in (alterations of) protein conformational state. For BCA, the D3 and D6 potential (which are applied between the deflection transfer and funnel 1 [F1] and the accumulation exit and the start of the ramp, respectively) had most profound effects, showing multimodal CCS distributions at higher potentials indicating gradual unfolding. The other DC potentials only marginally altered the CCS profiles of BCA. To allow for more general conclusions, five additional proteins of diverse molecular weight and conformational stability were analyzed, and for the main protein charge states, CCS profiles were constructed. Principal component analysis (PCA) of the obtained data showed that D1 and D3 exhibit the highest degree of correlation with the ratio of folded and unfolded protein (F/U) as extracted from the mobilograms obtained per set D potential. The correlation of D6 with F/U and protein charge were similar, and D2, D4, and D5 showed an inverse correlation with F/U but were correlated with protein charge. Although DC boundary values for induced conformational changes appeared protein dependent, a set of DC values could be determined, which assured native analysis of most proteins., (© 2024 The Authors. Journal of Mass Spectrometry published by John Wiley & Sons Ltd.)

Background: Therapeutic monoclonal antibodies (mAbs) comprise a large structural variability with respect to charge, size and post-translational modifications. These critical quality attributes (CQAs) need to be assessed during and after the production of mAbs. This normally requires off-line purification and sample preparation as well as several chromatographic selectivities, which makes the whole process time-consuming and error-prone. To improve on this, we developed an integrated and automated multi-dimensional analytical platform for the simultaneous assessment of multiple CQAs of mAbs in cell culture fluid (CCF) from upstream processes., Results: The on-line system allows mAb characterization at the intact level, combining protein A affinity chromatography (ProtA) with size-exclusion, ion-exchange, and reversed-phase liquid chromatographic modes with UV and mass spectrometric detection. Multiple heart cuts of a single mAb elution band from ProtA are stored in 20-μL loops and successively sent to the multimethod options in the second dimension. ProtA loading and elution conditions and their compatibility with second-dimension LC modes were studied and optimized. Subsequently, heart-cutting and valve-switching schemes were investigated to achieve effective and reproducible analyses. The applicability of the developed workflow was demonstrated by the direct analysis (i.e. not requiring off-line sample preparation) of a therapeutic mAb in CCF, obtaining useful information on accurate molecular mass, glycosylation, and charge and size variants of the mAb product at the same time and in just over 1 h., Significance: The developed multidimensional platform is the first system that allows for multiple fractions from a single ProtA band to be characterized using different chromatographic selectivities in a single run allowing direct correlation between CQAs. The performance of the system is comparable to established off-line methods, fully compatible with upstream process samples, and provides a significant time-reduction of the characterization procedure., Competing Interests: Declaration of competing interest The authors declare the following financial interests/ which may be considered as potential competing interests: Govert W. Somsen reports equipment was provided by Agilent Technologies Inc., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

Size-exclusion chromatography (SEC) employing aqueous mobile phases with volatile salts at neutral pH combined with native mass spectrometry (nMS) is a valuable tool to characterize proteins and protein aggregates in their native state. However, the liquid-phase conditions (high salt concentrations) frequently used in SEC-nMS hinder the analysis of labile protein complexes in the gas phase, necessitating higher desolvation-gas flow and source temperature, leading to protein fragmentation/dissociation. To overcome this issue, we investigated narrow SEC columns (1.0 mm internal diameter, I.D.) operated at 15-μL/min flow rates and their coupling to nMS for the characterization of proteins, protein complexes and higher-order structures (HOS). The reduced flow rate resulted in a significant increase in the protein-ionization efficiency, facilitating the detection of low-abundant impurities and HOS up to 230 kDa (i.e., the upper limit of the Orbitrap-MS instrument used). More-efficient solvent evaporation and lower desolvation energies allowed for softer ionization conditions (e.g., lower gas temperatures), ensuring little or no structural alterations of proteins and their HOS during transfer into the gas phase. Furthermore, ionization suppression by eluent salts was decreased, permitting the use of volatile-salt concentrations up to 400 mM. Band broadening and loss of resolution resulting from the introduction of injection volumes exceeding 3% of the column volume could be circumvented by incorporating an online trap-column containing a mixed-bed ion-exchange (IEX) material. The online IEX-based solid-phase extraction (SPE) or "trap-and-elute" set-up provided on-column focusing (sample preconcentration). This allowed the injection of large sample volumes on the 1-mm I.D. SEC column without compromising the separation. The enhanced sensitivity attained by the micro-flow SEC-MS, along with the on-column focusing achieved by the IEX precolumn, provided picogram detection limits for proteins., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

We report an online analytical platform based on the coupling of asymmetrical flow field-flow fractionation (AF4) and native mass spectrometry (nMS) in parallel with UV-absorbance, multi-angle light scattering (MALS), and differential-refractive-index (UV-MALS-dRI) detectors to elucidate labile higher-order structures (HOS) of protein biotherapeutics. The technical aspects of coupling AF4 with nMS and the UV-MALS-dRI multi-detection system are discussed. The "slot-outlet" technique was used to reduce sample dilution and split the AF4 effluent between the MS and UV-MALS-dRI detectors. The stability, HOS, and dissociation pathways of the tetrameric biotherapeutic enzyme (anticancer agent) l-asparaginase (ASNase) were studied. ASNase is a 140 kDa homo-tetramer, but the presence of intact octamers and degradation products with lower molecular weights was indicated by AF4-MALS/nMS. Exposing ASNase to 10 mM NaOH disturbed the equilibrium between the different non-covalent species and led to HOS dissociation. Correlation of the information obtained by AF4-MALS (liquid phase) and AF4-nMS (gas phase) revealed the formation of monomeric, tetrameric, and pentameric species. High-resolution MS revealed deamidation of the main intact tetramer upon exposure of ASNase to high pH (NaOH and ammonium bicarbonate). The particular information retrieved from ASNase with the developed platform in a single run demonstrates that the newly developed platform can be highly useful for aggregation and stability studies of protein biopharmaceuticals.

Alterations in protein structure may have profound effects on biological function. Analytical techniques that permit characterization of proteins while maintaining their conformational and functional state are crucial for studying changes in the higher order structure of proteins and for establishing structure-function relationships. Coupling of native protein separations with mass spectrometry is emerging rapidly as a powerful approach to study these aspects in a reliable, fast and straightforward way. This Review presents the available native separation modes for proteins, covers practical considerations on the hyphenation of these separations with mass spectrometry and highlights the involvement of affinity-based separations to simultaneously obtain structural and functional information of proteins. The impact of these approaches is emphasized by selected applications addressing biomedical and biopharmaceutical research questions., (© 2022. Springer Nature Limited.)

This chapter focuses on the application of capillary zone electrophoresis hyphenated with mass spectrometry (CZE-MS) for the characterization of monoclonal antibodies (mAbs). mAbs are complex molecules comprising different glycoforms and many other posttranslational modifications. In addition to this inherent microheterogeneity, misassembling of antibodies can take place during production contributing to their macroheterogeneity. CZE-MS is a versatile and powerful technique which has demonstrated high potential for the assessment of both micro- and macroheterogeneity of mAbs. In this chapter, technical and practical considerations for the characterization of mAbs by CZE-MS are described. CE-MS interfacing, capillary coatings for the prevention of mAb adsorption, and sample preparation considerations are covered in detail. The assessment of the macro- and microheterogeneity is discussed and exemplified through three different approaches involving analysis of intact, enzymatically digested, and reduced antibodies. The examples also illustrate the use of two commercially available interfacing techniques (i.e., sheath liquid and sheathless) as well as different types of capillary coatings (positively charged and neutral coatings)., (© 2022. Springer Science+Business Media, LLC, part of Springer Nature.)

There has been great progress in Huntington's disease (HD) research. Yet, effective treatments to halt disease before the onset of disabling symptoms are still unavailable. Scientific breakthroughs require an active and lasting commitment from families. However, they are traditionally less involved and heard in studies. Accordingly, the European Huntington Association (EHA) surveyed individuals at risk (HDRisk) and with premanifest HD (PreHD) to determine which factors affect their willingness to participate in research. Questions assessed research experience and knowledge, information sources, reasons for involvement and noninvolvement, and factors preventing and facilitating participation. The survey included 525 individuals, of which 68.8% never participated in studies and 38.6% reported limited research knowledge. Furthermore, 52% trusted patient organizations to get research information. Reasons for involvement were altruistic and more important than reasons for noninvolvement, which were related to negative emotions. Obstacles included time/financial constraints and invasive procedures, while professional support was seen as a facilitator. PreHD individuals reported less obstacles to research participation than HDRisk individuals. Overall, a high motivation to participate in research was noted, despite limited experience and literacy. This motivation is influenced by subjective and objective factors and, importantly, by HD status. Patient organizations have a key role in fostering motivation through education and support.

Trifluoroacetic acid (TFA) is commonly used as mobile phase additive to improve retention and peak shape characteristics in hydrophilic interaction liquid chromatography (HILIC) of intact proteins. However, when using electrospray ionization-mass spectrometry (ESI-MS) detection, TFA may cause ionization suppression and adduct formation, leading to reduced analyte sensitivity. To address this, we describe a membrane-based microfluidic chip with multiple parallel channels for the selective post-column removal of TFA anions from HILIC. An anion-exchange membrane was used to physically separate the column effluent from a stripper flow solution comprising acetonitrile, formic acid, and propionic acid. The exchange of ions allowed the post-column removal of TFA used during HILIC separation of model proteins. The multichannel design of the device allows the use of flow rates of 0.2 mL/min without the need for a flow splitter, using mobile phases containing 0.1% TFA (13 mM). Separation selectivity and efficiency were maintained (with minor band broadening effects) while increasing the signal intensity and peak areas by improving ionization and reducing TFA adduct formation.

Background: beta-lactoglobulin (BLG) is one of the major cow's milk proteins and the most abundant allergen in whey. Heating is a common technologic treatment applied during milk transformational processes. Maillardation of BLG in the presence of reducing sugars and elevated temperatures may influence its antigenicity and allergenicity., Primary Objective: to analyze and identify lactosylation sites by capillary electrophoresis mass spectrometry (CE-MS)., Secondary Objective: to assess the effect of lactosylated BLG on antigenicity and degranulation of mast cells., Methods: BLG was lactosylated at pH 7, a water activity (aw) of 0.43, and a temperature of 65 °C using a molar ratio BLG:lactose of 1:1 by incubating for 0, 3, 8, 16 or 24 h. For the determination of the effect on antibody-binding capacity of lactosylated BLG, an ELISA was performed. For the assessment of degranulation of the cell-line RBL-hεIa-2B12 transfected with the human α-chain, Fcε receptor type 1 (FcεRI) was used., Results: BLG showed saturated lactosylation between 8 and 16 incubation hours in our experimental setup. Initial stage lactosylation sites L1 (N-terminus)-K47, K60, K75, K77, K91, K138 and K141-have been identified using CE-MS. Lactosylated BLG showed a significant reduction of both the IgG binding ( p = 0.0001) as well as degranulation of anti-BLG IgE-sensitized RBL-hεIa-2B12 cells ( p < 0.0001)., Conclusions and Clinical Relevance: this study shows that lactosylation of BLG decreases both the antigenicity and degranulation of mast cells and can therefore be a promising approach for reducing allergenicity of cow's milk allergens provided that the process is well-controlled.

Trapped ion-mobility spectrometry combined with quadrupole time-of-flight mass spectrometry (TIMS-QTOFMS) was evaluated as a tool for resolving linear and branched isomeric polyester oligomers. Solutions of polyester samples were infused directly into the ion source employing electrospray ionization (ESI). TIMS-MS provides both mobility and m / z data on the formed ions, allowing construction of extracted-ion mobilograms (EIMs). EIMs of polyester molecules showed multimodal patterns, indicating conformational differences among isomers. Subsequent TIMS-MS/MS experiments indicated mobility differences to be caused by (degree of) branching. These assignments were supported by liquid chromatography-TIMS-MS/MS analysis, confirming that direct TIMS-MS provided fast (500 ms/scan) distinction between linear and branched small oligomers. Observing larger oligomers (up to 3000 Da) using TIMS required additional molecular charging to ensure ion entrapment within the mobility window. Molecular supercharging was achieved using m -nitrobenzyl alcohol (NBA). The additional charges on the oligomer structures enhanced mobility separation of isomeric species but also added to the complexity of the obtained fragmentation mass spectra. This complexity could be partly reduced by post-TIMS analyte-decharging applying collision-induced dissociation (CID) prior to Q1 with subsequent isolation of the singly charged ions for further fragmentation. The as-obtained EIM profiles were still quite complex as larger molecules possess more possible structural isomers. Nevertheless, distinguishing between linear and symmetrically branched oligomers was possible based on measured differences in collisional cross sections (CCSs). The established TIMS-QTOFMS approach reliably allows branching information on isomeric polyester molecules up to 3000 Da to be obtained in less than 1 min analysis time.

Protein dynamics play a significant role in many aspects of enzyme activity. Monitoring of structural changes and aggregation of biotechnological enzymes under native conditions is important to safeguard their properties and function. In this work, the potential of asymmetrical flow field-flow fractionation (AF4) to study the dynamic association equilibria of the enzyme β-D-galactosidase (β-D-Gal) was evaluated. Three commercial products of β-D-Gal were investigated using carrier liquids containing sodium chloride or ammonium acetate, and the effect of adding magnesium (II) chloride to the carrier liquid was assessed. Preservation of protein structural integrity during AF4 analysis was essential and the influence of several parameters, such as the focusing step (including use of frit-inlet), cross flow, and injected amount, was studied. Size-exclusion chromatography (SEC) and dynamic light scattering (DLS) were used to corroborate the in-solution enzyme oligomerization observed with AF4. In contrast to SEC, AF4 provided sufficiently mild separation conditions to monitor protein conformations without disturbing the dynamic association equilibria. AF4 analysis showed that ammonium acetate concentrations above 40 mM led to further association of the dimers ("tetramerization") of β-D-Gal. Magnesium ions, which are needed to activate β-D-Gal, appeared to induce dimer association, raising justifiable questions about the role of divalent metal ions in protein oligomerization and on whether tetramers or dimers are the most active form of β-D-Gal., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020. Published by Elsevier B.V.)

This chapter aims to explore various parameters involved in achieving high-end capillary electrophoresis hyphenated to mass spectrometry (CE-MS) analysis of proteins, peptides, and their posttranslational modifications. The structure of the topics discussed in this book chapter is conveniently mapped on the scheme of the CE-MS system itself, starting from sample preconcentration and injection techniques and finishing with mass analyzer considerations. After going through the technical considerations, a variety of relevant applications for this analytical approach are presented, including posttranslational modifications analysis, clinical biomarker discovery, and its growing use in the biotechnological industry., (© 2021. Springer Nature Switzerland AG.)

Many industrial enzymes exhibit macro- and micro-heterogeneity due to co-occurring post-translational modifications. The resulting proteoforms may have different activity and stability and, therefore, the characterization of their distributions is of interest in the development and monitoring of enzyme products. Protein glycosylation may play a critical role as it can influence the expression, physical and biochemical properties of an enzyme. We report the use of hydrophilic interaction liquid chromatography-mass spectrometry (HILIC-MS) to profile intact glycoform distributions of high mannose-type N-glycosylated proteins, using an industrially produced fungal lipase for the food industry as an example. We compared these results with conventional reversed phase LC-MS (RPLC-MS) and sodium dodecyl sulfate-polyacrylamide gel-electrophoresis (SDS-PAGE). HILIC appeared superior in resolving lipase heterogeneity, facilitating mass assignment of N-glycoforms and sequence variants. In order to understand the glycoform selectivity provided by HILIC, fractions from the four main HILIC elution bands for lipase were taken and subjected to SDS-PAGE and bottom-up proteomic analysis. These analyses enabled the identification of the most abundant glycosylation sites present in each fraction and corroborated the capacity of HILIC to separate protein glycoforms based on the number of glycosylation sites occupied. Compared to RPLC-MS, HILIC-MS reducted the sample complexity delivered to the mass spectrometer, facilitating the assignment of the masses of glycoforms and sequence variants as well as increasing the number of glycoforms detected (69 more proteoforms, 177% increase). The HILIC-MS method required relatively short analysis time (<30 min), in which over 100 glycoforms were distinguished. We suggest that HILIC(-MS) can be a valuable tool in characterizing bioengineering processes aimed at steering protein glycoform expression as well as to check the consistency of product batches., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Size-exclusion chromatography employing aqueous mobile phases with volatile salts at neutral pH combined with electrospray-ionization mass spectrometry (SEC-ESI-MS) is a useful tool to study proteins in their native state. However, whether the applied eluent conditions actually prevent protein-stationary phase interactions, and/or protein denaturation, often is not assessed. In this study, the effects of volatile mobile phase additives on SEC retention and ESI of proteins were thoroughly investigated. Myoglobin was used as the main model protein, and eluents of varying ionic strength and pH were applied. The degree of interaction between protein and stationary phase was evaluated by calculating the SEC distribution coefficient. Protein-ion charge state distributions obtained during offline and online native ESI-MS were used to monitor alterations in protein structure. Interestingly, most of the supposedly mild eluent compositions induced nonideal SEC behavior and/or protein unfolding. SEC experiments revealed that the nature, ionic strength, and pH of the eluent affected protein retention. Protein-stationary phase interactions were effectively avoided using ammonium acetate at ionic strengths above 0.1 M. Direct-infusion ESI-MS showed that the tested volatile eluent salts seem to follow the Hofmeister series: no denaturation was induced using ammonium acetate (kosmotropic), whereas ammonium formate and bicarbonate (both chaotropic) caused structural changes. Using a mobile phase of 0.2 M ammonium acetate (pH 6.9), several proteins (i.e., myoglobin, carbonic anhydrase, and cytochrome c) could be analyzed by SEC-ESI-MS using different column chemistries without compromising their native state. Overall, with SEC-ESI-MS, the effect of nonspecific interactions between protein and stationary phase on the protein structure can be studied, even revealing gradual structural differences along a peak.

Glycosylation is a topic of intense current interest in the development of biopharmaceuticals because it is related to drug safety and efficacy. This work describes results of an interlaboratory study on the glycosylation of the Primary Sample (PS) of NISTmAb, a monoclonal antibody reference material. Seventy-six laboratories from industry, university, research, government, and hospital sectors in Europe, North America, Asia, and Australia submitted a total of 103 reports on glycan distributions. The principal objective of this study was to report and compare results for the full range of analytical methods presently used in the glycosylation analysis of mAbs. Therefore, participation was unrestricted, with laboratories choosing their own measurement techniques. Protein glycosylation was determined in various ways, including at the level of intact mAb, protein fragments, glycopeptides, or released glycans, using a wide variety of methods for derivatization, separation, identification, and quantification. Consequently, the diversity of results was enormous, with the number of glycan compositions identified by each laboratory ranging from 4 to 48. In total, one hundred sixteen glycan compositions were reported, of which 57 compositions could be assigned consensus abundance values. These consensus medians provide community-derived values for NISTmAb PS. Agreement with the consensus medians did not depend on the specific method or laboratory type. The study provides a view of the current state-of-the-art for biologic glycosylation measurement and suggests a clear need for harmonization of glycosylation analysis methods., (© 2020 De Leoz et al.)

Protein glycosylation is one of the most common and critical post-translational modification, which results from covalent attachment of carbohydrates to protein backbones. Glycosylation affects the physicochemical properties of proteins and potentially their function. Therefore it is important to establish analytical methods which can resolve glycoforms of glycoproteins. Recently, hydrophilic-interaction liquid chromatography (HILIC)-mass spectrometry has demonstrated to be a useful tool for the efficient separation and characterization of intact protein glycoforms. In particular, amide-based stationary phases in combination with acetonitrile-water gradients containing ion-pairing agents, have been used for the characterization of glycoproteins. However, finding the optimum gradient conditions for glycoform resolution can be quite tedious as shallow gradients (small decrease of acetonitrile percentage in the elution solvent over a long time) are required. In the present study, the retention mechanism and peak capacity of HILIC for non-glycosylated and glycosylated proteins were investigated and compared to reversed-phase liquid chromatography (RPLC). For both LC modes, ln k vs. φ plots of a series of test proteins were calculated using linear solvent strength (LSS) analysis. For RPLC, the plots were spread over a wider φ range than for HILIC, suggesting that HILIC methods require shallower gradients to resolve intact proteins. Next, the usefulness of computer-aided method development for the optimization of the separation of intact glycoform by HILIC was examined. Five retention models including LSS, adsorption, and mixed-mode, were tested to describe and predict glycoprotein retention under gradient conditions. The adsorption model appeared most suited and was applied to the gradient prediction for the separation of the glycoforms of six glycoproteins (Ides-digested trastuzumab, alpha-acid glycoprotein, ovalbumin, fetuin and thyroglobulin) employing the program PIOTR. Based on the results of three scouting gradients, conditions for high-efficiency separations of protein glycoforms varying in the degree and complexity of glycosylation was achieved, thereby significantly reducing the time needed for method optimization., (Copyright © 2019 Elsevier B.V. All rights reserved.)

In all life sciences ligand binding assays (LBAs) play a crucial role. Unfortunately these are very error prone. One part of this uncertainty results from the unavoidable random measurement uncertainty, another part can be attributed to the experimental design. To investigate the latter, uncertainty propagation was evaluated as a function of the given experimental design. A design space including the normalized maximum response range (nMRR), the data point position (DPP), the data point range (DPR) and the number of data points (NoDP) was defined. Based on ten measured ms ACE source data sets 20 specific parameter sets were selected by Design of Experiments. Monte Carlo simulations using 100 000 repeats for every parameter set were employed. The resulting measurement uncertainty propagation factors (measurement uncertainty multiplier: MUM) were used to describe the whole design space by polynomial regression. The resulting 5-dimensional response surface was investigated to evaluate the design parameter's influence and to find the minimal uncertainty propagation. It could be shown, that the nMRR is of highest importance, followed by DPP and DPR. Interestingly, the NoDP is less relevant. However, the interactions of the four parameters need to be carefully considered during design optimization. Using at least five data points which cover over 40% of the upper part of the binding hyperbola (DPP > 0.57) the MUM will be minimized (MUM approximately 1.5) when the nMRR is appropriate. It is possible to reduce the measurement uncertainty propagation more than one order of magnitude., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Antibody-based pharmaceuticals often encompass a complex structural heterogeneity requiring enhanced analytical methods for reliable characterization of variants and degradation products. We have explored the capabilities of low-flow sheathless capillary electrophoresis-mass spectrometry (CE-MS) for the high-resolution and sensitive profiling of antibody therapeutics. Near-zero electroosmotic flow was achieved by employing a novel neutral capillary coating that also prevents protein adsorption. CE-MS analysis of intact model proteins using an acidic background electrolyte demonstrated satisfactory performance, with overall migration-time RSDs below 2.2% from three different capillaries tested. For system evaluation, three nanobody preparations, including mono- and bivalent forms, and three monoclonal antibodies (mAbs) were analyzed. Intact nanobodies were resolved from their degradation products, which could be assigned to deamidated, cleaved, and truncated forms at the C-terminal tag. Excellent resolution of isomeric deamidated products was obtained. The mAbs were analyzed intact and after digestion by the endoproteinase IdeS (middle-up approach). CE-MS of intact mAbs provided resolution of clipped species (e.g. light chain and light chain-heavy chain fragments) from the native protein. Moreover, glycoforms containing sialic acids were resolved from their non-sialylated counterparts. For IdeS-digested, F (ab) 2 and Fc/2 portions where efficiently resolved for the three mAbs. Whereas the migration time of the Fc/2 fragments was fairly similar, the migration time of the F (ab) 2 part was strongly varied among the mAbs. For all mAbs, separation of Fc/2 charge variants - including sialylated glycoforms and other post-translational modifications, such as loss of C-terminal lysine or asparagine deamidation - was achieved. This allowed a detailed and reliable assessment of the Fc/2 heterogeneity (18-33 proteoforms) of the three analyzed mAbs., (Copyright © 2018 The Authors. Published by Elsevier B.V. All rights reserved.)

Monoclonal antibodies (mAbs) and antibody-drug conjugates (ADCs) are highly potent biopharmaceuticals designed for targeted cancer therapies. mAbs and ADCs can undergo modifications during production and storage which may affect binding to target receptors, potentially altering drug efficacy. In this work, liquid chromatography was coupled online to surface plasmon resonance (LC-SPR) to allow label-free affinity evaluation of mAb and ADC sample constituents (size and charge variants), under near-native conditions. Trastuzumab and its ADC trastuzumab emtansine (T-DM1) were used as a test sample and were analyzed by aqueous size-exclusion chromatography (SEC)-SPR before and after exposure to aggregate-inducing conditions. SEC-SPR allowed separation of the formed aggregates and measurement of their affinity towards the ligand-binding domain of the human epidermal growth factor receptor 2 (HER2) receptor immobilized on the surface of the SPR sensor chip. The monomer and aggregates of the mAb and ADC were shown to have similar antigen affinity. Conjugation of drugs to trastuzumab appeared to accelerate the aggregate formation. In addition, cation-exchange chromatography (CEX) was coupled to SPR enabling monitoring the maximum ligand-analyte binding capacity (R max ) of individual charge variants present in mAbs. Deamidated species and lysine variants in trastuzumab sample were separated but did not show different binding affinities to the immobilized HER2-binding domain. In order to allow protein variant assignment, parallel MS detection was added to the LC-SPR setup using a column effluent split. The feasibility of the LC-MS/SPR system was demonstrated by analysis of trastuzumab and T-DM1 providing information on antibody glycoforms and/or determination of the drug-to-antibody ratio (DAR), while simultaneously monitoring binding of eluting species to HER2. Graphical abstract ᅟ.

Glycosylation is considered a critical quality attribute of therapeutic proteins. Protein heterogeneity introduced by glycosylation includes differences in the nature, number and position of the glycans. Whereas analysis of released glycans and glycopeptides provides information about the composition and/or position of the glycan, intact glycoprotein analysis allows assignment of individual proteoforms and co-occurring modifications. Yet, resolving protein glycoforms at the intact level is challenging. We have explored the capacity of hydrophilic liquid chromatography-mass spectrometry (HILIC-MS) for assessing glycosylation patterns of intact pharmaceutical proteins by analyzing the complex glycoproteins interferon-beta-1a (rhIFN-β - 1a) and recombinant human erythropoietin (rhEPO). Efficient glycoform separation was achieved using a superficially-porous amide HILIC stationary phase and trifluoroacetic acid (TFA) as eluent additive. In-source collision-induced dissociation proved to be very useful to minimize protein-signal suppression effects by TFA. Direct injection of therapeutic proteins in aqueous formulation was possible without causing extra band dispersion, provided that the sample injection volume was not larger than 2 μL. HILIC-MS of rhIFN-β - 1a and rhEPO allowed the assignment of, respectively, 15 and 51 glycoform compositions, next to a variety of posttranslational modifications, such as succinimide, oxidation and N-terminal methionine-loss products. MS-based assignments showed that neutral glycan units significantly contributed to glycoform separation, whereas terminal sialic acids only had a marginal effect on HILIC retention. Comparisons of HILIC-MS with the selectivity provided by capillary electrophoresis-MS for the same glycoproteins, revealed a remarkable complementarity of the techniques. Finally it was demonstrated that by replacing TFA for difluoroacetic acid, peak resolution somewhat decreased, but rhEPO glycoforms with relative abundances below 1% could be detected by HILIC-MS, increasing the overall rhEPO glycoform coverage to 72., (Copyright © 2018 The Authors. Published by Elsevier B.V. All rights reserved.)

A capillary zone electrophoresis (CZE) method with UV detection was developed for the quantification of the E.colil-asparaginase (l-ASNase) and its acidic variants. During the initial method development, a variety of experimental conditions were screened. Subsequently, a Design of Experiments (DoE) was used to optimize the pH and concentration of the selected background electrolyte (BGE) containing both TRIS and boric acid. Optimization was performed taking into account both the separation efficiency of l-ASNase and its acidic variants as well as overall method robustness. A repeatable separation between E.colil-ASNase and its acidic variants was achieved on a bare fused silica capillary in combination with a BGE consisting of both 400 mM TRIS and boric acid. The method was validated for linearity, accuracy, precision, LOD, LOQ and robustness. The recovery for l-ASNase was 97.9-104.4% with a precision RSD of 1.5-3.2%, while the recovery of impurities was 92.1-109.8% with a RSD of 1.7-4.6%. The quantification limit was 1.9% (m/m). Moreover, the CZE-UV method was applied to determine the degradation rate in the presence of ammonium bicarbonate, confirming the suitability of the method. The degraded, partially charged l-ASNase was evaluated for its in-vitro enzymatic activity showing an insignificant different enzyme activity compared to the unmodified sample., (Copyright © 2018 Elsevier B.V. All rights reserved.)

The on-line coupling of micellar electrokinetic chromatography and mass spectrometry (MEKC-MS) is often hampered by incompatibility problems leading to reduced separation performance and unfavorable limits of detection (LODs). Here we propose a new selective and highly sensitive MEKC-MS/MS method employing a sheathless porous-tip interface in combination with a micellar phase comprised of semi-volatile surfactant molecules. Carbamate pesticides (CRBs) were selected as representative model compounds being neutral toxic pollutants potentially present at trace levels in environmental water samples. A background electrolyte of 75mM perfluorooctanoic acid adjusted to pH 9.0 with ammonium hydroxide allowed efficient separation of 15 CRBs and appeared fully compatible with electrospray ionization (ESI)-MS. Interfacing parameters, such as the distance between the capillary tip and mass-spectrometer inlet, ESI voltage, and dry gas temperature and flow were optimized in order to attain good spray stability and high analyte signal-to-noise ratios. For CRBs the LODs ranged from 0.2 to 3.9ngL -1 (13nL injected, i.e., 2% of capillary volume), representing an improvement for certain CRBs of more than 300-fold when compared with conventional sheath-liquid interfacing. Good linearity (R 2 >0.99) and satisfactory reproducibility were obtained for all CRBs with interday RSD values for peak area and migration time of 4.0-11.3% and below 1.5%, respectively. Analysis of spiked mineral water showed that the new MEKC-MS/MS method allows selective and quantitative determination of CRB concentrations below the maximum residue limit of 100ngL -1 without the need for sample preconcentration., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Greater control is desirable in the stochastic conjugation technology used to synthesize antibody-drug conjugates (ADC). We have shown recently that a fluorescent dye can be stably conjugated to a mAb using a bifunctional platinum(II) linker. Here, we describe the general applicability of this novel linker technology for the preparation of stable and efficacious ADCs. The ethylenediamine platinum(II) moiety, herein called Lx, was coordinated to Desferal (DFO) or auristatin F (AF) to provide storable "semifinal" products, which were directly conjugated to unmodified mAbs. Conjugation resulted in ADCs with unimpaired mAb-binding characteristics, DAR in the range of 2.5 to 2.7 and approximately 85% payload bound to the Fc region, presumably to histidine residues. To evaluate the in vivo stability of Lx and its effect on pharmacokinetics and tumor targeting of an ADC, Lx-DFO was conjugated to the HER2 mAb trastuzumab, followed by radiolabeling with 89 Zr. Trastuzumab-Lx-DFO- 89 Zr was stable in vivo and exhibited pharmacokinetic and tumor-targeting properties similar to parental trastuzumab. In a xenograft mouse model of gastric cancer (NCI-N87) or an ado-trastuzumab emtansine-resistant breast cancer (JIMT-1), a single dose of trastuzumab-Lx-AF outperformed its maleimide benchmark trastuzumab-Mal-AF and FDA-approved ado-trastuzumab emtansine. Overall, our findings show the potential of the Lx technology as a robust conjugation platform for the preparation of anticancer ADCs. Cancer Res; 77(2); 257-67. ©2016 AACR., (©2016 American Association for Cancer Research.)

In this work we explored the feasibility of different CE-ESI-MS set-ups for the analysis of conformational states of an intact protein. By using the same background electrolyte at quasi physiological conditions (50 mM ammonium bicarbonate, pH 7.4) a sequential optimization was carried out, initially by evaluating a sheath-liquid interface with both a single quadrupole (SQ) and a time-of-flight (TOF) mass spectrometer; then a sheathless interface coupled with high-resolution QTOF MS was considered. Beta 2 -microglobulin has been taken as a model, as it is an amyloidogenic protein and its conformational changes are strictly connected to the onset of a disease. The separation of two conformers at dynamic equilibrium is achieved all the way down to the MS detection. Notably, the equilibrium ratio of the protein conformers is maintained in the electrospray source after CE separation. Strengths and weaknesses of each optimized set-up are emphasized and their feasibility in unfolding studies is evaluated. In particular, ESI-TOF MS can assign protein forms that differ by 1 Da only and sheathless interfacing is best suited to preserve protein structure integrity. This demonstrates the CE-ESI-MS performance in terms of separation, detection and characterization of conformational species that co-populate a protein solution., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Surface plasmon resonance (SPR) is an optical technique that measures biomolecular interactions. Stand-alone SPR cannot distinguish different binding components present in one sample. Moreover, sample matrix components may show non-specific binding to the sensor surface, leading to detection interferences. This study describes the development of coupled size-exclusion chromatography (SEC) SPR sensing for the separation of sample components prior to their on-line bio-interaction analysis. A heterogeneous polyclonal human serum albumin antibody (anti-HSA) sample, which was characterized by proteomics analysis, was used as test sample. The proposed SEC-SPR coupling was optimized by studying system parameters, such as injection volume, flow rate and sample concentration, using immobilized HSA on the sensor chip. Automated switch valves were used for on-line regeneration of the SPR sensor chip in between injections and for potential chromatographic heart cutting experiments, allowing SPR detection of individual components. The performance of the SEC-SPR system was evaluated by the analysis of papain-digested anti-HSA sampled at different incubation time points. The new on-line SEC-SPR methodology allows specific label-free analysis of real-time interactions of eluting antibody sample constituents towards their antigenic target., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Comprehensive physicochemical characterization and biological assays are essential parts in assessing quality attributes of biologicals. Here, we compared the quality of different marketed recombinant human erythropoietin (epoetin) products: originators, Eprex and NeoRecormon as well as 2 biosimilars, Retacrit and Binocrit. In addition, assessment of batch-to-batch variability was included by collecting 2 or more batches of each product. Common assays which included sodium dodecyl sulfate-polyacrylamide gel electrophoresis, high-performance size-exclusion chromatography, asymmetrical flow field-flow fractionation, capillary zone electrophoresis, and potency testing were used. Of the tested products and among batches of single products, variations in epoetin content, isoform profiles, and potency were found. Ultimately, this study demonstrated the high quality of epoetin products with some degree of variation among products and batches, confirming the "similar but not identical" paradigm of biologicals., (Copyright © 2016. Published by Elsevier Inc.)

A novel approach for the direct injection from plant tissues without any sample pre-treatment has been developed by simply placing a small piece of the tissue into a capillary electrophoresis vial followed by application of a voltage for electrokinetic injection. Separations of sodium, potassium, calcium and magnesium were achieved using a BGE comprising 10mM imidazole and 2.5mM 18-crown-6-ether at pH 4.5. The addition of 2% (m/v) hydroxypropylmethyl cellulose to the separation buffer allowed for precise and accurate electrokinetic injection of ions from the plant material by halting the movement of tissue fluid into the capillary. This method provides both qualitative and quantitative data of inorganic cations, with quantitation in zucchini, mushroom and apple samples in agreement with Sector Field Inductively Coupled Plasma Mass Spectrometric analysis (r(2)=0.98, n=9). This method provides a new way for rapid, quantitative analysis by eliminating sample preparation procedures, and has great potential for a range of applications in plant science and food chemistry., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Capillary electrophoresis (CE) coupled with mass spectrometry (MS) has proven to be a powerful analytical tool for the characterization of intact proteins. It combines the high separation efficiency, short analysis time, and versatility of CE with the mass selectivity and sensitivity offered by MS detection. This chapter focuses on important practical considerations when applying CE-MS for the analysis of intact proteins. Technological aspects with respect to the use of CE-MS interfaces and application of noncovalent capillary coatings preventing protein adsorption are treated. Critical factors for successful protein analysis are discussed and four typical CE-MS systems are described demonstrating the characterization of different types of intact proteins by CE-MS. These methodologies comprise the use of sheath-liquid and sheathless CE-MS interfaces, and various types of noncovalent capillary coatings allowing efficient and reproducible protein separations. The discussion includes the analysis of lysozyme-drug conjugates and the therapeutic proteins human growth hormone, human interferon-β-1a, and human erythropoietin.

A collaborative study on the robustness and portability of a capillary electrophoresis-mass spectrometry method for peptide mapping was performed by an international team, consisting of 13 independent laboratories from academia and industry. All participants used the same batch of samples, reagents and coated capillaries to run their assays, whereas they utilized the capillary electrophoresis-mass spectrometry equipment available in their laboratories. The equipment used varied in model, type and instrument manufacturer. Furthermore, different types of sheath-flow capillary electrophoresis-mass spectrometry interfaces were used. Migration time, peak height and peak area of ten representative target peptides of trypsin-digested bovine serum albumin were determined by every laboratory on two consecutive days. The data were critically evaluated to identify outliers and final values for means, repeatability (precision within a laboratory) and reproducibility (precision between laboratories) were established. For relative migration time the repeatability was between 0.05 and 0.18% RSD and the reproducibility between 0.14 and 1.3% RSD. For relative peak area repeatability and reproducibility values obtained were 3-12 and 9-29% RSD, respectively. These results demonstrate that capillary electrophoresis-mass spectrometry is robust enough to allow a method transfer across multiple laboratories and should promote a more widespread use of peptide mapping and other capillary electrophoresis-mass spectrometry applications in biopharmaceutical analysis and related fields., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Most conventional analytical tools for the assessment of protein-protein interactions yield information on the bulk sample. By employing the efficient separation of intact proteins, affinity capillary electrophoresis (ACE) can measure the interaction of components of heterogeneous proteins with a target protein. In this work, the hyphenation of ACE with mass spectrometry (MS) is presented as a novel, highly selective tool for the assessment of protein-protein interactions. The binding of the protease inhibitor aprotinin to trypsinogen was used as protein-protein affinity model. A trypsinogen sample comprising several modifications was analyzed using a background electrolyte of 25 mM ammonium acetate (pH 8.0) containing increasing concentrations of aprotinin (0-300 μM). A capillary coating of polybrene-dextran sulfate-polybrene (PB-DS-PB) was employed to prevent adsorption of the proteins to the capillary wall. The trypsinogen variants were separated and could be assigned based on detected molecular masses and relative migration. In presence of aprotinin, both free and aprotinin-bound trypsinogen were detected revealing a 1:1 binding stoichiometry. For most trypsinogen variants, shifts in electrophoretic mobility were observed upon raising the aprotinin concentration, allowing determination of their dissociation constants (Kd's). The interacting trypsinogen variants showed similar affinity toward aprotinin (Kd's of 3-9 μM), which were not significantly different from the values obtained with ACE-UV and were in agreement with an earlier reported value. The use of the ratio of obtained MS signal intensities of free and protein-protein complex for the determination of Kd's was also explored. Derived Kd values (20-104 μM) for the binding variants were similar to those obtained with direct-infusion MS, but higher and less precise as compared with values based on mobility shifts. The suitability of the ACE-MS methodology for the affinity profiling of heterogeneous protein samples was evaluated, and components with high, medium, or low affinity toward aprotinin could be successfully discriminated.

The potential of platinum(II) as a bifunctional linker in the coordination of small molecules, such as imaging agents or (cytotoxic) drugs, to monoclonal antibodies (mAbs) was investigated with a 4-nitrobenzo-2-oxa-1,3-diazole (NBD) fluorophore and trastuzumab (Herceptin™) as a model antibody. The effect of ligand and reaction conditions on conjugation efficiency was explored for [Pt(en)(L-NBD)Cl](NO3 ) (en=ethylenediamine), with L=N-heteroaromatic, N-alkyl amine, or thioether. Conjugation proceeded most efficiently at pH 8.0 in the presence of NaClO4 or Na2 SO4 in tricine or HEPES buffer. Reaction of N-coordinated complexes (20 equiv) with trastuzumab at 37 °C for 2 h, followed by removal of weakly bound complexes with excess thiourea, afforded conjugates with an NBD/mAb ratio of 1.5-2.9 that were stable in phosphate-buffered saline at room temperature for at least 48 h. In contrast, thioether-coordinated complexes afforded unstable conjugates. Finally, surface plasmon resonance analysis showed no loss in binding affinity of trastuzumab after conjugation., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Chemical modification of biomolecules like the introduction of metal-chelators into proteins can lead to heterogeneous product formation. The nature and extend of the modification is important in interpreting the biological properties of the bioconjugate, given their possible influence on the pharmacokinetics as well as on the binding affinity to the target. The present study describes the synthesis and analytical characterization of somatropin modified on its lysine's ɛ-amino groups with the acylating chelator S-2-(4-isothiocyanatobenzyl)-1,4,7-triazacyclononane-1,4,7-triacetic acid (p-SCN-Bn-NOTA). Direct separation and identification techniques (i.e. RP-MS and CE-MS) and peptide mapping after trypsin and chymotrypsin digestion demonstrated that the use of higher amounts of p-SCN-Bn-NOTA during synthesis leads to a complex product composition with higher order substitution degrees (i.e. multiple NOTA-moieties per somatropin molecule), as well as the presence of different position isomers. From the nine lysine (Lys) residues in somatropin, Lys-70 was experimentally found to be the modification hotspot under our synthesis conditions (pH=9.0). This was supported by the in silico calculated lowest pKa value of 8.3 for Lys-70. Based on the crystal structure of somatropin in complex with the extracellular parts of the growth hormone receptor, the Lys-70 residue is positioned outside the binding pockets and will therefore not directly interfere with receptor binding. Gallium chelation by NOTA-somatropin resulted in a 100% complexation. The synthesis of NOTA-somatropin using p-SCN-Bn-NOTA and somatropin under our operational conditions is therefore a suitable synthesis procedure for the production of a target-specific radiopharmaceutical for further investigation toward treatment and visualization of growth hormone-specific cancers., (Copyright © 2014 Elsevier B.V. All rights reserved.)

A flow-through microvial is used to interface capillary electrophoresis and mass spectrometry (CE-MS) to develop a method for simultaneous profiling both neutral and sialylated glycans without derivatization or labeling. The CE separation was performed at near-zero electroosmotic flow in a capillary with neutral, hydrophilic coating, using 50 mM ammonium acetate in 20% methanol (pH 3.1) as the background electrolyte. The method was optimized with reversed CE polarity and negative ion ESI-MS. Enzymatically released N-glycans from human immunoglobulin G (IgG) were used as the test sample. The approach was also used to study the more complex N-glycans from recombinant human erythropoietin (rHuEPO) expressed in Chinese hamster ovary (CHO) cells. Glycoscreening of rHuEPO was performed using a triple quadrupole MS and an ultrahigh resolution TOF-MS. The high sensitivity and high mass accuracy of the TOF-MS revealed the presence of more than 70 glycans. Three mono- and di-sialylated tetra-antennary N-glycans and one mono-sialylated tri-antennary N-glycan of rHuEPO are reported for the first time. Further glycan heterogeneity was identified of the highly sialylated N-glycans of rHuEPO by extensive acetylation, Neu5Ac/Neu5Gc variation and the presence of N-acetyl-lactosamine repeats. For comparative purposes, porous graphitic carbon-based LC-MS/MS was also used to glycoprofile rHuEPO. This work demonstrates the potential of CE-MS to provide a comprehensive glycosylation profile with detailed features of the secondary glycan modifications. The CE-MS based method eliminates the need to label the N-glycans, as well as the requirement to desialylate before analysis, and could complement other established techniques for glycan characterization of therapeutic glycoproteins.

Drug purity and affinity are essential attributes during development and production of therapeutic proteins. In this work, capillary electrophoresis (CE) was used to determine both the affinity and composition of the biotechnologically produced "nanobody" EGa1, the binding fragment of a heavy-chain-only antibody. EGa1 is an antagonist of the epidermal growth factor receptor (EGFR), which is overexpressed on the surface of tumor cells. Using a background electrolyte (BGE) of 50mM sodium phosphate (pH 8.0) in combination with a polybrene-poly(vinylsulfonic acid) capillary coating, CE analysis of EGa1 showed the presence of at least three components. Affinity of the EGa1 components towards the extracellular domain of EGFR was assessed by adding different concentrations (0-12 nM) of the receptor to the BGE while measuring the effective electrophoretic mobility of the respective EGa1 components. Binding curves obtained by plotting electrophoretic mobility shifts as a function of receptor concentration, yielded dissociation constants (Kd) of 1.65, 1.67, and 1.75 nM for the three components, respectively; these values were comparable to the Kd of 2.1 nM obtained for the bulk EGa1 product using a cellular assay. CE with mass spectrometry (MS) detection using a BGE of 25 mM ammonium acetate (pH 8.0) revealed that the EGa1 sample comprised of significant amounts of deamidated, bisdeamidated and N-terminal pyroglutamic acid products. CE-MS using a BGE of 100mM acetic acid (pH 2.8) in combination with a polybrene-dextran sulfate-polybrene capillary coating demonstrated the additional presence of minor products related to incomplete removal of the signal peptide from the produced nanobody. Combining the results obtained from affinity CE and CE-MS, it is concluded that the EGa1 nanobody product is heterogeneous, comprising highly-related proteins that exhibit very similar affinity towards EGFR., (Copyright © 2014 Elsevier B.V. All rights reserved.)

The hepatocyte growth factor receptor (HGFR, c-Met or Met) is a receptor tyrosine kinase that is involved in embryogenesis, tissue regeneration and wound healing. Abnormal activation of this proto-oncogene product is implicated in the development, progression and metastasis of many cancers. Current therapies directed against Met, such as ligand- or, dimerization-blocking antibodies or kinase inhibitors, reduce tumor growth but hardly eradicate the tumor. In order to improve anti-Met therapy, we have designed a drug delivery system consisting of crosslinked albumin nanoparticles decorated with newly selected anti-Met nanobodies (anti-Met-NANAPs). The anti-Met NANAPs bound specifically to and were specifically taken up by Met-expressing cells and transported to lysosomes for degradation. Treatment of tumor cells with anti-Met NANAPs also resulted in downregulation of the total Met protein. This study shows that anti-Met NANAPs offer a potential system for lysosomal delivery of drugs into Met-positive tumor cells., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

Analyte-wall interaction is a significant problem in capillary electrophoresis (CE) as it may compromise separation efficiencies and migration time repeatability. In CE, self-assembled polyelectrolyte multilayer films of Polybrene (PB) and dextran sulfate (DS) or poly(vinylsulfonic acid) (PVS) have been used to coat the capillary inner wall and thereby prevent analyte adsorption. In this study, atomic force microscopy (AFM) was employed to investigate the layer thickness and surface morphology of monolayer (PB), bilayer, (PB-DS and PB-PVS), and trilayer (PB-DS-PB and PB-PVS-PB) coatings on glass surfaces. AFM nanoshaving experiments providing height distributions demonstrated that the coating procedures led to average layer thicknesses between 1 nm (PB) and 5 nm (PB-DS-PB), suggesting the individual polyelectrolytes adhere flat on the silica surface. Investigation of the surface morphology of the different coatings by AFM revealed that the PB coating does not completely cover the silica surface, whereas full coverage was observed for the trilayer coatings. The DS-containing coatings appeared on average 1 nm thicker than the corresponding PVS-containing coatings, which could be attributed to the molecular structure of the anionic polymers applied. Upon exposure to the basic protein cytochrome c, AFM measurements showed an increase of the layer thickness for bare (3.1 nm) and PB-DS-coated (4.6 nm) silica, indicating substantial protein adsorption. In contrast, a very small or no increase of the layer thickness was observed for the PB and PB-DS-PB coatings, demonstrating their effectiveness against protein adsorption. The AFM results are consistent with earlier obtained CE data obtained for proteins using the same polyelectrolyte coatings., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Capillary electrophoresis coupled to time-of-flight mass spectrometry (CE-TOF-MS) via a porous tip sheathless electrospray ionization (ESI) interface was studied for the characterization of pharmaceutical glycoproteins. To achieve optimal glycoform separation, background electrolytes of low pH were used in conjunction with a capillary with a neutral coating exhibiting near-zero electroosmotic flow. Crucial interfacing parameters, like ESI voltage and ESI tip-to-end plate distance, were optimized for very low flow rates (∼5 nL/min) in order to attain maximum sensitivity and stable performance. Under optimal conditions, the sheathless CE-MS interface provided significantly increased ionization efficiencies for intact proteins and decreased ionization suppression leading to detection limits in the picomolar-range. Analysis of a sample of recombinant human interferon-β allowed the assignment of at least 18 glycoforms, plus a variety of deamidation, succinimide, and oxidation products, representing a considerable improvement over sheath-liquid CE-MS. The sheathless CE-MS system also proved highly suitable for the glycoprofiling of recombinant human erythropoietin, revealing 74 glycoforms in a 60-min run. In addition, oxidation and acetylation products were detected, overall resulting in assignment of more than 250 different isoforms. Semiquantitative glycoprofiles could be derived for both pharmaceutical proteins, with estimated glycoform concentrations analyzed ranging from 0.35 to 950 nM. These profiles may be very useful for quality control of biopharmaceuticals and their biosimilars.

Since its introduction in 1987, CE-MS has become an increasingly important technique for the analysis of biomolecules. Since our previous update on CE-MS methods within the field of intact protein analysis (Electrophoresis 2011, 32, 66-82), a variety of interesting methodological improvements and applications have been reported in literature. Therefore, this article presents an overview of the development and application of CE-MS for intact protein analysis as published between June 2010 and June 2012. The article is divided in sections that treat CE coupled to MS through ESI, MALDI, and ICP ionization, respectively. In the section about CE-ESI-MS, technological developments with respect to CE-MS interfacing, prevention of protein adsorption, and chip-based CE-MS are treated in more detail. Novel interfacing strategies and the development of improved capillary coating strategies appeared to be the major developments. Furthermore, in all sections, the applicability of CE-MS for intact protein analysis is demonstrated by representative examples, including important developments in the fields of biopharmaceutical characterization and the analysis of proteins in biological samples. Finally, some general conclusions and future perspectives are given., (© 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The epidermal growth factor receptor (EGFR) is a validated target for anti-cancer therapy and several EGFR inhibitors are used in the clinic. Over the years, an increasing number of studies have reported on the crosstalk between EGFR and other receptors that can contribute to accelerated cancer development or even acquisition of resistance to anti-EGFR therapies. Combined targeting of EGFR and insulin-like growth factor 1 receptor (IGF-1R) is a rational strategy to potentiate anti-cancer treatment and possibly retard resistance development. In the present study, we have pursued this by encapsulating the kinase inhibitor AG538 in anti-EGFR nanobody-liposomes. The thus developed dual-active nanobody-liposomes associated with EGFR-(over)expressing cells in an EGFR-specific manner and blocked both EGFR and IGF-1R activation, due to the presence of the EGFR-blocking nanobody EGa1 and the anti-IGF-1R kinase inhibitor AG538 respectively. AG538-loaded nanobody-liposomes induced a strong inhibition of tumor cell proliferation even upon short-term exposure followed by a drug-free wash-out period. Therefore, AG538-loaded nanobody-liposomes are a promising anti-cancer formulation due to efficient intracellular delivery of AG538 in combination with antagonistic and downregulating properties of the EGa1 nanobody-liposomes., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Drug-protein conjugates have been widely used for the cell-specific targeting of drugs to cells that can bind and internalize the proteinaceous carrier. For renal drug targeting, lysozyme (LZM) can be used as an effective carrier that accumulates in proximal tubular cells. We used capillary electrophoresis-time-of-flight mass spectrometry (CE-TOF-MS) for the characterization of different drug-LZM conjugates. A recently developed prototype porous tip sprayer was employed for sheathless electrospray ionization (ESI) CE-MS interfacing. In order to prevent adsorption of LZM conjugates to the capillary wall, a positively charged polyethylenimine capillary coating was used in combination with a low-pH background electrolyte. Drug-LZM products had been prepared by first coupling BOC-l-methionine hydroxysuccinimide ester (BOCmet) to lysine residues of LZM followed by conjugation with the kinase inhibitors LY364947, erlotinib, or Y27632 via a platinum(II)-based linker. CE-TOF-MS of each preparation showed narrow symmetrical peaks for the various reaction products demonstrating that drug-LZM conjugates remained stable during the CE analysis and subsequent ESI. Components observed in the drug-LZM products were assigned based on their relative migration times and on molecular mass as obtained by TOF-MS. The TOF-MS data obtained for the individual components revealed that the preparations contained LZM carrying one or two drug molecules, next to unmodified and BOCmet-modified LZM. Based on relative peak areas (assuming an equimolar response for each component) a quantitative conjugate profile could be derived for every preparation leading to drug loading values of 0.4-0.6 mol drug per mole protein., (Copyright © 2011 Elsevier B.V. All rights reserved.)

In this work, the usefulness of capillary electrophoresis-electrospray ionization time-of-flight-mass spectrometry for the analysis of biopharmaceuticals was studied. Noncovalently bound capillary coatings consisting of Polybrene-poly(vinyl sulfonic acid) or Polybrene-dextran sulfate-Polybrene were used to minimize protein and peptide adsorption, and achieve good separation efficiencies. The potential of the capillary electrophoresis-mass spectrometry (CE-MS) system to characterize degradation products was investigated by analyzing samples of the drugs, recombinant human growth hormone (rhGH) and oxytocin, which had been subjected to prolonged storage, heat exposure, and/or different pH values. Modifications could be assigned based on accurate masses as obtained with time-of-flight-mass spectrometry (TOF-MS) and migration times with respect to the parent compound. For heat-exposed rhGH, oxidations, sulfonate formation, and deamidations were observed. Oxytocin showed strong deamidation (up to 40%) upon heat exposure at low pH, whereas at medium and high pH, mainly dimer (>10%) and trisulfide formation (6-7%) occurred. Recombinant human interferon-β-1a (rhIFN-β) was used to evaluate the capability of the CE-MS method to assess glycan heterogeneity of pharmaceutical proteins. Analysis of this N-glycosylated protein revealed a cluster of resolved peaks which appeared to be caused by at least ten glycoforms differing merely in sialic acid and hexose N-acetylhexosamine composition. Based on the relative peak area (assuming an equimolar response per glycoform), a quantitative profile could be derived with the disialytated biantennary glycoform as most abundant (52%). Such a profile may be useful for in-process and quality control of rhIFN-β batches. It is concluded that the separation power provided by combined capillary electrophoresis and TOF-MS allows discrimination of highly related protein species.

Purpose: To compare the quality of therapeutic erythropoietin (EPO) products, including two biosimilars, with respect to content, aggregation, isoform profile and potency., Methods: Two original products, Eprex (epoetin alpha) and Dynepo (epoetin delta), and two biosimilar products, Binocrit (epoetin alpha) and Retacrit (epoetin zeta), were compared using (1) high performance size exclusion chromatography, (2) ELISA, (3) SDS-PAGE, (4) capillary zone electrophoresis and (5) in-vivo potency., Results: Tested EPO products differed in content, isoform composition, and potency., Conclusion: Of the tested products, the biosimilars have the same or even better quality as the originals. Especially, the potency of originals may significantly differ from the value on the label.

CE coupled to MS has proven to be a powerful analytical tool for the characterization of intact proteins, as it combines the high separation efficiency of CE with the selectivity of MS. This review provides an overview of the development and application of CE-MS methods within the field of intact protein analysis as published between January 2007 and June 2010. Ongoing technological developments with respect to CE-MS interfacing, capillary coatings for CE-MS, coupling of CIEF with MS and chip-based CE-MS are treated. Furthermore, CE-MS of intact proteins involving ESI, MALDI and ICP ionization is outlined and overviews of the use of the various CE-MS methods are provided by tables. Representative examples illustrate the applicability of CE-MS for the characterization of proteins, including glycoproteins, biopharmaceuticals, protein-ligand complexes, biomarkers and dietary proteins. It is concluded that CE-MS is a valuable technique with high potential for intact protein analysis, providing useful information on protein identity and purity, including modifications and degradation products., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The performance of a prototype porous tip sprayer for sheathless capillary electrophoresis-mass spectrometry (CE-MS) of intact proteins was studied. Capillaries with a porous tip were inserted in a stainless steel needle filled with static conductive liquid and installed in a conventional electrospray ionization (ESI) source. Using a BGE of 100 mM acetic acid (pH 3.1) and a positively charged capillary coating, a highly reproducible and efficient separation of four model proteins (insulin, carbonic anhydrase II, ribonuclease A and lysozyme) was obtained. The protein mass spectra were of good quality allowing reliable mass determination of the proteins and some of their impurities. Sheath-liquid CE-MS using the same porous tip capillary and an isopropanol-water-acetic acid sheath liquid showed slightly lower to similar analyte responses. However, as noise levels increased with sheath-liquid CE-MS, detection limits were improved by a factor 6.5-20 with sheathless CE-MS. The analyte response in sheathless CE-MS could be enhanced using a nanoESI source and adding 5% isopropanol to the BGE, leading to improved detection limits by 50-fold to 140-fold as compared to sheath liquid interfacing using the same capillary - equivalent to sub-nM detection limits for three out of four proteins. Clearly, the sheathless porous tip sprayer provides high sensitivity CE-MS of intact proteins., (Copyright © 2010 Elsevier B.V. All rights reserved.)

A capillary electrophoresis-mass spectrometry (CE-MS) method using sheath liquid electrospray ionization interfacing was studied and optimized for the analysis of intact basic proteins. To prevent protein adsorption, capillaries with a noncovalent positively charged coating were utilized. Capillaries were coated by subsequent rinsing with solutions of Polybrene, dextran sulfate and Polybrene. The coating proved to be fully compatible with MS detection, causing no background signals and ionization suppression. The composition of the sheath liquid and BGE was optimized using the model proteins α-chymotrypsinogen A, ribonuclease A, lysozyme and cytochrome c. A sheath liquid of isopropanol-water-acetic acid (75:25:0.1, v/v/v) at 2 μL min(-1) resulted in optimal signal intensities for most proteins, but caused dissociation of the heme group of cytochrome c. Optimum protein responses were obtained with a BGE of 50 mM acetic acid (pH 3.0), which allowed a baseline separation of the test protein mixture. Several minor impurities present in the mixture could be detected and provisionally identified using accurate mass and a protein modification database. The selectivity of the CE-MS system was investigated by the analysis of acetylated lysozyme. Eight highly related species, identified as non-acetylated lysozyme and lysozyme acetylated in various degrees, could be distinguished. The CE-MS system showed good reproducibility yielding interday (three weeks period) RSDs for migration time and peak area within 2% and 10%, respectively. With the CE-MS system, determination coefficients (R(2)) for protein concentration and peak area were higher than 0.996, whereas detection limits were between 11 and 19 nM., (Copyright © 2010 Elsevier B.V. All rights reserved.)

Protein adsorption to silica surfaces is a notorious problem in analytical separations. Evanescent-wave cavity ring-down spectroscopy (EW-CRDS) and capillary electrophoresis (CE) were employed to investigate the capability of positively charged polymer coatings to minimize the adsorption of basic proteins. Adsorption of cytochrome c (cyt c) to silica coated with a single layer of polybrene (PB), or a triple layer of PB, dextran sulfate (DS), and PB, was studied and compared to bare silica. Direct analysis of silica surfaces by EW-CRDS revealed that both coatings effectively reduce irreversible protein adsorption. Significant adsorption was observed only for protein concentrations above 400 microM, whereas the PB-DS-PB coating was shown to be most effective and stable. CE analyses of cyt c were performed with and without the respective coatings applied to the fused-silica capillary wall. Monitoring of the electroosmotic flow and protein peak areas indicated a strong reduction of irreversible protein adsorption by the positively charged coatings. Determination of the electrophoretic mobility and peak width of cyt c revealed reversible protein adsorption to the PB coating. It is concluded that the combination of results from EW-CRDS and CE provides highly useful information on the adsorptive characteristics of bare and coated silica surfaces toward basic proteins.