Search

The self-assembly of submonolayer amounts of Au on the densely stepped Si(553) surface creates an array of closely spaced "atomic wires" separated by 1.5 nm. At low temperature, charge transfer between the terraces and the row of silicon dangling bonds at the step edges leads to a charge-ordered state within the row of dangling bonds with ×3 periodicity. Interactions between the dangling bonds lead to their ordering into a fully two-dimensional (2D) array with centered registry between adjacent steps. We show that as the temperature is raised, soliton defects are created within each step edge. The concentration of solitons rises with increasing temperature and eventually destroys the 2D order by decoupling the step edges, reducing the effective dimensionality of the system to 1D. This crossover from higher to lower dimensionality is unexpected and, indeed, opposite to the behavior in other systems.

Ultrafast reflection high-energy electron diffraction is employed to follow the lattice excitation of a Bi(111) surface upon irradiation with a femtosecond laser pulse. The thermal motion of the atoms is analyzed through the Debye-Waller effect. While the Bi bulk is heated on time scales of 2 to 4 ps, we observe that the excitation of vibrational motion of the surface atoms occurs much slower with a time constant of 12 ps. This transient nonequilibrium situation is attributed to the weak coupling between bulk and surface phonon modes which hampers the energy flow between the two subsystems. From the absence of a fast component in the transient diffraction intensity, it is in addition concluded that truncated bulk phonon modes are absent at the surface., (© 2019 Author(s).)

Strong optical irradiation of indium atomic wires on a Si(111) surface causes the nonthermal structural transition from the (8 × 2) reconstructed ground state to an excited (4 × 1) state. The immediate recovery of the system to the ground state is hindered by an energy barrier for the collective motion of the indium atoms along the reaction coordinate from the (4 × 1) to the (8 × 2) state. This metastable, supercooled state can only recover through nucleation of the ground state at defects like adsorbates or step edges. Subsequently, a recovery front propagates with constant velocity across the surface and the (8 × 2) ground state is reinstated. In a combined femtosecond electron diffraction and photoelectron emission microscopy study, we determined-based on the step morphology-a velocity of this recovery front of ∼100 m/s.

The lattice response of a Bi(111) surface upon impulsive femtosecond laser excitation is studied with time-resolved reflection high-energy electron diffraction. We employ a Debye-Waller analysis at large momentum transfer of 9.3 Å -1 ≤ Δ k  ≤ 21.8 Å -1 in order to study the lattice excitation dynamics of the Bi surface under conditions of weak optical excitation up to 2 mJ/cm 2 incident pump fluence. The observed time constants τ int of decay of diffraction spot intensity depend on the momentum transfer Δ k and range from 5 to 12 ps. This large variation of τ int is caused by the nonlinearity of the exponential function in the Debye-Waller factor and has to be taken into account for an intensity drop Δ I > 0.2. An analysis of more than 20 diffraction spots with a large variation in Δ k gave a consistent value for the time constant τ T of vibrational excitation of the surface lattice of 12 ± 1 ps independent on the excitation density. We found no evidence for a deviation from an isotropic Debye-Waller effect and conclude that the primary laser excitation leads to thermal lattice excitation, i.e., heating of the Bi surface.

We present a newly designed 30 kV pulsed electron gun for ultrafast electron diffraction suited for pump-probe setups driven by femtosecond laser pulses. The electron gun can be operated both in transmission and reflection geometry. A robust design with a back illuminated Au photocathode, extraction fields of 7.5 kV/mm, and a magnetic focus lens ensures reliable daily use. Magnetic deflectors allow for beam alignment and characterization. Focusing of the UV pulse on the photocathode results in a small source size of photoemitted electrons and thus a high transverse coherence length of more than 50 nm in diffraction. A low difference of ΔE = 0.1 eV between the work function of the 10 nm Au photocathode and photon energy of the frequency tripled UV laser pulses results in an instrumental temporal resolution of 330 fs full width at half maximum. This resolution is discussed with respect to the number of electrons per pulse.

The photoinduced structural dynamics of the atomic wire system on the Si(111)-In surface has been studied by ultrafast electron diffraction in reflection geometry. Upon intense fs-laser excitation, this system can be driven in around 1 ps from the insulating [Formula: see text] reconstructed low temperature phase to a metastable metallic [Formula: see text] reconstructed high temperature phase. Subsequent to the structural transition, the surface heats up on a 6 times slower timescale as determined from a transient Debye-Waller analysis of the diffraction spots. From a comparison with the structural response of the high temperature [Formula: see text] phase, we conclude that electron-phonon coupling is responsible for the slow energy transfer from the excited electron system to the lattice. The significant difference in timescales is evidence that the photoinduced structural transition is non-thermally driven.

Transient control over the atomic potential-energy landscapes of solids could lead to new states of matter and to quantum control of nuclear motion on the timescale of lattice vibrations. Recently developed ultrafast time-resolved diffraction techniques combine ultrafast temporal manipulation with atomic-scale spatial resolution and femtosecond temporal resolution. These advances have enabled investigations of photo-induced structural changes in bulk solids that often occur on timescales as short as a few hundred femtoseconds. In contrast, experiments at surfaces and on single atomic layers such as graphene report timescales of structural changes that are orders of magnitude longer. This raises the question of whether the structural response of low-dimensional materials to femtosecond laser excitation is, in general, limited. Here we show that a photo-induced transition from the low- to high-symmetry state of a charge density wave in atomic indium (In) wires supported by a silicon (Si) surface takes place within 350 femtoseconds. The optical excitation breaks and creates In-In bonds, leading to the non-thermal excitation of soft phonon modes, and drives the structural transition in the limit of critically damped nuclear motion through coupling of these soft phonon modes to a manifold of surface and interface phonons that arise from the symmetry breaking at the silicon surface. This finding demonstrates that carefully tuned electronic excitations can create non-equilibrium potential energy surfaces that drive structural dynamics at interfaces in the quantum limit (that is, in a regime in which the nuclear motion is directed and deterministic). This technique could potentially be used to tune the dynamic response of a solid to optical excitation, and has widespread potential application, for example in ultrafast detectors.

Purpose: In autologous osteochondral transplantation, the edges of the harvested plug are particularly susceptible to mechanical or thermal damage to the chondrocytes. We hypothesised that the applied harvesting device has an impact on chondrocyte vitality., Methods: Both knees of five blackhead sheep (ten knees) underwent open osteochondral plug harvesting with three different circular harvesting devices (osteoarticular transfer system harvester [OATS; diameter 8 mm; Arthrex, Munich, Germany], diamond cutter [DC; diameter 8.35 mm; Karl Storz, Tuttlingen, Germany] and hollow reamer with cutting crown [HRCC; diameter 7 mm; Dannoritzer, Tuttlingen, Germany]) from distinctly assigned anatomical sites of the knee joint. The rotary cutters (DC and HRCC) were either used with (+) or without cooling (-). Surgical cuts of the cartilage with a scalpel blade were chosen as control method. After cryotomy cutting, chondrocyte vitality was assessed using fluorescence microscopy and a Live/Dead assay., Results: There were distinct patterns of chondrocyte vitality, with reproducible accumulations of dead chondrocytes along the harvesting edge. No statistical difference in chondrocyte survivorship was seen between the OATS technique and the control method, or between the HRCC+ technique and the control method (P > 0.05). The DC+, HRCC- and DC- techniques yielded significantly lower chondrocyte survival rates compared with the control method (P < 0.05)., Conclusions: Chondrocyte survival in osteochondral cylinders depends on the applied harvesting technique. The use of rotary cutters without cooling yielded worst results, while the traditional OATS punch and rotary cutters with cooling achieved comparable rates of chondrocyte vitality.

Ultrafast high energy electron diffraction in reflection geometry is employed to study the structural dynamics of self-organized Germanium hut-, dome-, and relaxed clusters on Si(001) upon femtosecond laser excitation. Utilizing the difference in size and strain state the response of hut- and dome clusters can be distinguished by a transient spot profile analysis. Surface diffraction from {105}-type facets provide exclusive information on hut clusters. A pixel-by-pixel analysis of the dynamics of the entire diffraction pattern gives time constants of 40, 160, and 390 ps, which are assigned to the cooling time constants for hut-, dome-, and relaxed clusters.