Search

Self-formation of boron-doped diamond (BDD)-multilayer graphene (MLG) core-shell nanowalls (BDGNWs) via microwave plasma-enhanced chemical vapor deposition is systematically investigated. Here, the incorporation of nitrogen brings out the origin of MLG shells encapsulating the diamond core, resulting in unique sp 3 /sp 2 hybridized frameworks. The evolution mechanism of the nanowall-like morphology with the BDD-MLG core-shell composition is elucidated through a variety of spectroscopic studies. The photocatalytic performance of these core-shell nanowalls is examined by the deterioration of methylene blue (MB) and rhodamine B (RhB) dyes beneath low-power ultraviolet (UV) light irradiation. Starting with 5 ppm dye solutions and employing BDGNWs as the photocatalyst, remarkable degradation efficiencies of 95% for MB within 100 min and 91% for RhB within 220 min are achieved. The effect of varying dye concentrations was also examined. The enhanced photocatalytic activity is driven by carrier photogeneration and mediated by the Schottky junction formed between BDD and MLG, promoting efficient photoinduced charge separation. The stability of the BDGNW photocatalyst is examined, and after five test runs, the photocatalytic behavior for MB and RhB degradation decreases to 87 and 85%, respectively, from initial values of 96 and 91%, demonstrating excellent photostability. These findings underscore the significance of diamond-graphene nanoarchitectures as promising green carbonaceous photocatalysts.

Enhanced oxygen reduction reaction (ORR) kinetics and selectivity are crucial to advance energy technologies like fuel cells and metal-air batteries. Single-atom catalysts (SACs) with M-N 4 /C structure have been recognized to be highly effective for ORR. However, the lack of a comprehensive understanding of the mechanistic differences in the activity under acidic and alkaline environments is limiting the full potential of the energy devices. Here, a porous SAC is synthesized where a cobalt atom is coordinated with doped nitrogen in a graphene framework (pCo-N 4 C). The resulting pCo-N 4 C catalyst demonstrates a direct 4e - ORR process and exhibits kinetics comparable to the state-of-the-art (Pt/C) catalyst. Its higher activity in an acidic electrolyte is attributed to the tuned porosity-induced hydrophobicity. However, the pCo-N 4 C catalyst displays a difference in ORR activity in 0.1 m HClO 4 and 0.1 m KOH, with onset potentials of 0.82 V and 0.91 V versus RHE, respectively. This notable activity difference in acidic and alkaline media is due to the protonation of coordinated nitrogen, restricted proton coupled electron transfer (PCET) at the electrode/electrolyte interface. The effect of pH over the catalytic activity is further verified by Ab-initio molecular dynamics (AIMD) simulations using density functional theory (DFT) calculations., (© 2024 Wiley‐VCH GmbH.)

Fungal endophytes are a known warehouse of bioactive compounds with multifarious applications. In the present investigation two compounds, β-Sitosterol (1) and ursolic acid (2), were isolated from Alternaria alternata , an endophytic fungus associated with Morus alba Linn for the first time. The structure of the compounds was elucidated on the basis of comprehensive spectral analysis (UV, IR, 1 H-, 13 C- and 2D-NMR, as well as HRESI-MS). In the in vitro alpha amylase inhibitory assay both compounds (1) and (2) show potent antidiabetic activity. In support, Docking studies indicate significant binding affinity of the isolated compounds. Hence from the present study, it can be concluded that endophytic fungi in Morus alba Linn can find use in antidiabetic drug development in the medicinal industry.Communicated by Ramaswamy H. Sarma.

Degradation of dyes under natural light sources is one of the most active research areas in basic science for greener technology. In this context, the photocatalytic activity of semiconductors has received massive attention in solving water treatment-related issues as these possess enormous potential for degrading organic impurities. Here, we report that barium aluminate (BaAl 2 O 4 , BAO), which has been extensively studied for photoluminescence applications, is found to be a highly potent candidate for photocatalytic activities. We have explored the degradation of dyes (meant for water purification) by using the photocatalytic properties of pure and Dy- and Yb-codoped BAO. Crystal structure, electron microscopy, and Raman analysis of the autocombustion-synthesized pure and codoped BAO samples revealed significant morphological changes such as increased particle size and stabilization of rod-like structures. UV-vis absorbance measurements confirm the presence of multiple bandgaps in the BAO samples, which is substantiated by X-ray absorption spectroscopy measurements. Photocatalytic degradation studies of methylene blue (MB) dye (with different catalyst concentrations, dopings, and MB dye concentrations) have been carried out by using BAO. The kinetics of the photocatalytic degradation measurements has been explained by the Boltzmann distribution function, and the fastest (in less than 40 min), with more than 99% degradation of MB impurity, is reported here for the first time in BAO compounds. Synthesized BAO samples show excellent cyclic stability, which is essential for their potential applications in environmental remediation. The trade-off between the enhancement of surface area and increased particle size is considered the key parameter for controlling the photocatalytic performance of the BAO catalyst after Dy and Yb codopings.

Chromium nitride (CrN) spurred enormous interest due to its coupled magnetostructural and unique metal-insulator transition. The underneath electronic structure of CrN remains elusive. Herein, the electronic structure of epitaxial CrN thin film has been explored by employing resonant photoemission spectroscopy (RPES) and X-ray absorption near edge spectroscopy study in combination with the first-principles calculations. The RPES study indicates the presence of a charge-transfer screened 3[Formula: see text] ([Formula: see text]: hole in the N-2[Formula: see text]) and 3[Formula: see text] final-states in the valence band regime. The combined experimental electronic structure along with the orbital resolved electronic density of states from the first-principles calculations reveals the presence of Cr(3[Formula: see text])-N(2[Formula: see text]) hybridized (3[Formula: see text]) states between lower Hubbard (3[Formula: see text]) and upper Hubbard (3[Formula: see text]) bands with onsite Coulomb repulsion energy (U) and charge-transfer energy ([Formula: see text]) estimated as [Formula: see text] 4.5 and 3.6 eV, respectively. It verifies the participation of ligand (N-2[Formula: see text]) states in low energy charge fluctuations and provides concrete evidence for the charge-transfer ([Formula: see text]U) insulating nature of CrN thin film., (© 2023. Springer Nature Limited.)

Many traditional cancer treatments such as radiation and chemotherapy are known to induce cellular DNA damage as part of their cytotoxic activity. The cGAS-STING signaling axis, a key member of the DNA damage response that acts as a sensor of foreign or aberrant cytosolic DNA, is helping to rationalize the DNA-damaging activity of these treatments and their emerging immunostimulatory capacity. Moreover, cGAS-STING, which is attracting considerable attention for its ability to promote antitumor immune responses, may fundamentally be able to address many of the barriers limiting the success of cancer immunotherapy strategies, including the immunosuppressive tumor microenvironment. Herein, we review the traditional cancer therapies that have been linked with cGAS-STING activation, highlighting their targets with respect to their role and function in the DNA damage response. As part of the review, an emerging "chemoimmunotherapy" concept whereby DNA-damaging agents are used for the indirect activation of STING is discussed as an alternative to the direct molecular agonism strategies that are in development, but have yet to achieve clinical approval. The potential of this approach to address some of the inherent and emerging limitations of cGAS-STING signaling in cancer immunotherapy is also discussed. Ultimately, it is becoming clear that in order to successfully employ the immunotherapeutic potential of the cGAS-STING axis, a balance between its contrasting antitumor and protumor/inflammatory activities will need to be achieved.

The development of better electrode materials for lithium-ion batteries has been intensively investigated both due to their fundamental scientific aspects as well as their usefulness in technological applications. The present technological development of rechargeable batteries is hindered by fundamental challenges, such as low energy and power density, short lifespan, and sluggish charge transport kinetics. Among the various anode materials proposed, heterosite FePO 4 (h-FP) has been found to intercalate lithium and sodium ion hosts to obtain novel rechargeable batteries. The h-FP has been obtained via the delithiation of triphylite LiFePO 4 (LFP), and its structural and electronic properties have been investigated with different crystallite sizes. The synchrotron XRD measurements followed by Rietveld refinement analysis reveal lattice expansion upon the reduction of crystallite size of h-FP. In addition, the decrease in the crystallite size enhances surface energy contributions, thereby creating more oxygen vacancies up to 2% for 21 nm crystallite size. The expansion in the lattice parameters is reflected in the vibrational properties of the h-FP structure, where the red-shift has been observed in the characteristic modes upon the reduction of crystallite size. The local environment of the transition metal ion and its bonding characteristics have been elucidated through soft X-ray absorption spectroscopy (XAS) with the effect of crystallite size. XAS unequivocally reveals the valence state of iron 3d electrons near the Fermi level, which is susceptible to local lattice distortion and uncovers the detailed information on the evolution of electronic states with crystallite size. The observed local lattice distortion has been considered to be as a result of the decrease in the level of covalency between the Fe-3d and O-2p states. Further, we demonstrate the structural advantages of nanosized h-FP on the transport properties, where an enhancement in the polaronic conductivity with decreasing crystallite size has been observed. The polaronic conduction mechanism has been analyzed and discussed on the basis of the Mott model of polaron conduction along with an insightful analysis on the role of the electronic structure. The present study provides spectroscopic results on the anode material that reveal the evolution of electronic states for fingerprinting, understanding, and optimizing it for advanced rechargeable battery operations., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Magnetoelastic and magnetoelectric coupling in the artificial multiferroic heterostructures facilitate valuable features for device applications such as magnetic field sensors and electric-write magnetic-read memory devices. In ferromagnetic/ferroelectric heterostructures, the intertwined physical properties can be manipulated by an external perturbation, such as an electric field, temperature, or a magnetic field. Here, we demonstrate the remote-controlled tunability of these effects under visible, coherent, and polarized light. The combined surface and bulk magnetic study of domain-correlated Ni/BaTiO 3 heterostructures reveals that the system shows strong sensitivity to the light illumination via the combined effect of piezoelectricity, ferroelectric polarization, spin imbalance, magnetostriction, and magnetoelectric coupling. A well-defined ferroelastic domain structure is fully transferred from a ferroelectric substrate to the magnetostrictive layer via interface strain transfer. The visible light illumination is used to manipulate the original ferromagnetic microstructure by the light-induced domain wall motion in ferroelectric substrates and consequently the domain wall motion in the ferromagnetic layer. Our findings mimic the attractive remote-controlled ferroelectric random-access memory write and magnetic random-access memory read application scenarios, hence facilitating a perspective for room temperature spintronic device applications.

Alteration of transport properties of any material, especially metal oxides, by doping suitable impurities is not straightforward as it may introduce multiple defects like oxygen vacancies (V o ) in the system. It plays a decisive role in controlling the resistive switching (RS) performance of metal oxide-based memory devices. Therefore, a judicious choice of dopants and their atomic concentrations is crucial for achieving an optimum V o configuration. Here, we show that the rational designing of RS memory devices with cationic dopants (Ta), in particular, Au/Ti 1- x Ta x O 2-δ /Pt devices, is promising for the upcoming non-volatile memory technology. Indeed, a current window of ∼10 4 is realized at an ultralow voltage as low as 0.25 V with significant retention (∼10 4 s) and endurance (∼10 5 cycles) of the device by considering 1.11 at % Ta doping. The obtained device parameters are compared with those in the available literature to establish its excellent performance. Furthermore, using detailed experimental analyses and density functional theory (DFT)-based first-principles calculations, we comprehend that the meticulous presence of V o configurations and the columnar-like dendritic structures is crucial for achieving ultralow-voltage bipolar RS characteristics. In fact, the dopant-mediated V o interactions are found to be responsible for the enhancement in local current conduction, as evidenced from the DFT-simulated electron localization function plots, and these, in turn, augment the device performance. Overall, the present study on cationic-dopant-controlled defect engineering could pave a neoteric direction for future energy-efficient oxide memristors.

Aim: Investigate the relationship between response to pembrolizumab and expression of the 18-gene T cell-inflamed gene expression profile (Tcell inf GEP) or PD-L1 combined positive score (CPS) in esophageal cancer. Materials & methods: This analysis included heavily pretreated patients with advanced/metastatic esophageal/gastroesophageal junction adenocarcinoma or squamous cell carcinoma who received pembrolizumab in the single-arm, phase II study KEYNOTE-180. PD-L1 CPS was evaluated with PD-L1 IHC 22C3 pharmDx. Results: In patients with squamous cell carcinoma, trends toward enrichment for responders were observed for patients with PD-L1 CPS ≥10 tumors. In patients with adenocarcinoma, a trend was observed for Tcell inf GEP but not for PD-L1. Conclusion: Tcell inf GEP and PD-L1 CPS may enrich for responders to pembrolizumab in patients with esophageal cancer. Clinical trial registration : NCT02559687 (ClinicalTrials.gov).

In this work, we investigated the effect of Ag doping (2-20 at.%) on the phase formation of iron mononitride (FeN) thin films. Together with deposition of FeN using reactive dc magnetron sputtering, Ag was also co-sputtered at various doping levels between 2-20 at.%. We found that doping of Ag around 5 at.% is optimum to not only improve the thermal stability of FeN but also to reduce intrinsic defects that are invariably present in (even in epitaxial) FeN. Conversion electron Mössbauer spectroscopy and N K-edge x-ray near edge absorption measurements clearly reveal a reduction of defects in Ag doped FeN samples. Moreover, Fe self-diffusion measurements carried out using secondary ion mass spectroscopy depth-profiling and polarized neutron reflectivity in 57 Fe enriched samples exhibit an appreciable reduction in Fe self-diffusion in Ag doped FeN samples. Ag being immiscible with Fe and non-reactive with N, occupies grain-boundary positions as nanoparticles and prohibits the fast Fe self-diffusion in FeN., (© 2021 IOP Publishing Ltd.)

A prototype in situ X-ray absorption near-edge structure (XANES) system was developed to explore its sensitivity for ultra-thin films of iron-nitride (Fe-N), cobalt-nitride (Co-N) and nickel-nitride (Ni-N). They were grown using DC-magnetron sputtering in the presence of an N 2 plasma atmosphere at the experimental station of the soft XAS beamline BL01 (Indus-2, RRCAT, India). XANES measurements were performed at the N K-edge in all three cases. It was found that the N K-edge spectral shape and intensity are greatly affected by increasing thickness and appear to be highly sensitive, especially in low-thickness regions. From a certain thickness of ∼1000 Å, however, samples exhibit a bulk-like behavior. On the basis of the obtained results, different growth stages were identified. Furthermore, the presence of a molecular N 2 component in the ultra-thin regime (<100 Å) was also obtained in all three cases studied in this work. In essence, this prototype in situ system reveals that N K-edge XANES is a powerful technique for studying ultra-thin films, and the development of a dedicated in situ system can be effective in probing several phenomena that remain hitherto unexplored in such types of transition metal nitride thin films.

The superconducting transition temperature ( T C ) of rock-salt type niobium nitride ( δ - NbN) typically varies between 9 to 17 K and the theoretically predicted value of 18 K has not been achieved hitherto. The low T C in δ - NbN has been assigned to some structural disorder which is always present irrespective of the microstructure (polycrystalline or epitaxial), methods or conditions adopted during the growth of NbN thin films. In this work, we investigate the atomic origin of such suppression of the T C in δ - NbN thin films by employing combined methods of experiments and ab initio simulations. Sputtered δ - NbN thin films with different disorder were studied using the synchrotron-based N and Nb K-edge x-ray absorption spectroscopy techniques. A strong correlation between the superconductivity and the electronic structure reconstruction was observed. The theoretical analysis revealed that under N-rich growth conditions, atomic and molecular N-interstitial defects assisted by cation vacancies form spontaneously and results into a smeared electronic structure around Fermi-level. The role of electronic smearing on the T C is thoroughly discussed., (© 2021 IOP Publishing Ltd.)

This work reports about a novel approach for investigating surface processes during the early stages of galvanic corrosion of stainless steel in situ by employing ultra-thin films and synchrotron x-radiation. Characterized by x-ray techniques and voltammetry, such films, sputter deposited from austenitic steel, were found representing useful replicas of the target material. Typical for stainless steel, the surface consists of a passivation layer of Fe- and Cr-oxides, a couple of nm thick, that is depleted of Ni. Films of ≈4 nm thickness were studied in situ in an electrochemical cell under potential control (-0.6 to +0.8 V vs Ag/AgCl) during exposure to 0.1 M KCl. Material transport was recorded with better than 1/10 monolayer sensitivity by x-ray spectroscopy. Leaching of Fe was observed in the cathodic range and the therefor necessary reduction of Fe-oxide appears to be accelerated by atomic hydrogen. Except for minor leaching, reduction of Ni, while expected from Pourbaix diagram, was not observed until at a potential of about +0.8 V Cr-oxide was removed from the steel film. After couple of minutes exposure at +0.8 V, the current in the electrochemical cell revealed a rapid pitting event that was simultaneously monitored by x-ray spectroscopy. Continuous loss of Cr and Ni was observed during the induction time leading to the pitting, suggesting a causal connection with the event. Finally, a spectroscopic image of a pit was recorded ex situ with 50 nm lateral and 1 nm depth resolution by soft x-ray scanning absorption microscopy at the Fe L 2,3 -edges by using a 80 nm film on a SiN membrane, which is further demonstrating the usefulness of thin films for corrosion studies., (Creative Commons Attribution license.)

Crystallographic and electronic structures of phase pure ternary solid solutions of Ni 1- x Co x O ( x = 0 to 1) have been studied using XRD, EXAFS and XAS measurements. The lattice parameter of the cubic rock-salt (RS) Ni 1- x Co x O solid solutions increases linearly with increasing Co content and follows Vegard's law, in the complete composition range. A linear increase in the bond lengths (Ni/Co-O, Ni-Ni and Ni-Co) with " x ", closely following the bond lengths determined from virtual crystal approximation (VCA), is observed, which implies that there is only a minimal local distortion of the lattice in the mixed crystal. The optical gap of the ternary solid solution determined from diffuse reflectivity measurements shows neither a linear variation with Co composition nor bowing, as observed in many ternary semiconductors. This trend in the variation of optical gaps is explained by probing the conduction band using XAS at the O K-edge. We have observed that the variation in the onset energy of the conduction band edge with " x " is very similar to the variation in the optical gap with " x ", thus clearly indicating the dominant role played by the conduction band position in determining the optical gap. The variation in the intensities of the pre-edge peak in the XANES spectra measured at Ni and Co K-edges, and the L 1/2 peak in XAS spectra measured at Ni and Co L-edges, is found to depend on the unoccupied O 2p-metal-(Ni/Co) 3d hybridized states and the bond lengths., Competing Interests: There are no conflicts of interest to declare., (This journal is © The Royal Society of Chemistry.)

Background: The open-label phase IIIb/IV CheckMate 374 study (NCT02596035) was conducted to validate the safety and efficacy of flat-dose nivolumab 240 mg every 2 weeks (Q2W) in previously treated advanced/metastatic renal cell carcinoma. Three cohorts included patients with predominantly clear cell histology, non-clear cell histologies, or brain metastases. We report safety and efficacy from the advanced non-clear cell RCC (nccRCC) cohort of CheckMate 374., Methods: Eligible patients received 0 to 3 prior systemic therapies. Patients received nivolumab 240 mg Q2W for ≤24 months or until confirmed progression or unacceptable toxicity. The primary endpoint was incidence of high-grade (grade 3-5) immune-mediated adverse events (IMAEs). Exploratory endpoints included objective response rate (ORR), progression-free survival (PFS), and overall survival (OS)., Results: Forty-four patients had advanced nccRCC (papillary [n = 24], chromophobe [n = 7], unclassified [n = 8], other [n = 5]); 34.1% received ≥1 prior systemic regimen in the advanced/metastatic setting. With median follow-up of 11 (range, 0.4-27) months, no all-cause grade 3-5 IMAEs or treatment-related grade 5 adverse events were reported. ORR was 13.6% (95% confidence interval [CI], 5.2-27.4), with 1 complete response (chromophobe) and 5 partial responses (papillary [n = 2], chromophobe [n = 1], collecting duct [n = 1], and unclassified [n = 1] histology). Median PFS was 2.2 months (95% CI, 1.8-5.4). Median OS was 16.3 months (95% CI, 9.2-not estimable)., Conclusions: Safety of flat-dose nivolumab 240 mg Q2W was consistent with previous results. Clinically meaningful efficacy was observed with responses in several histologies, supporting nivolumab as a treatment option for patients with advanced nccRCC, a patient population with high unmet need., (Copyright © 2020 The Authors. Published by Elsevier Inc. All rights reserved.)

The correlation of several defects and optical and magnetic properties with Fe content in Zn 1-x Fe x Al 2 O 4 (0.01 ≤ x ≤ 0.40) nanocrystals has been scrutinized through X-ray diffraction, O K-edge X-ray absorption near-edge structure, FT-IR, diffuse reflectance, photoluminescence and electron spin-resonance spectroscopies, and vibrating sample magnetometry. Increasing Fe content causes elongation in the octahedral units of the lattice, accompanied by distortion in the octahedral coordination. Fe introduces non-radiative centres in the forbidden gap, thereby tuning the band gap from 4.37 to 3.88 eV and eliminating emission in the visible region. Zn vacancies are found to tail off, while {\rm Fe}&#95;i^{\bullet \bullet \bullet}, {\rm Al}&#95;{\rm Zn}^\bullet and Fe Al × antisite defects increase in concentration with increasing Fe content. Inhomogeneous broadening of spin-resonance signals infers strong spin-lattice interactions of Fe 3+ ions at distorted octahedral and non-symmetric tetrahedral sites. A transition is observed from paramagnetism to superparamagnetism at higher Fe concentrations. A visual colour change from pearly white to orange-brown is observed in Zn 1-x Fe x Al 2 O 4 nanocrystals with increasing Fe content, revealing its potential candidature for pigments in the paint and dye industries.

Graphene-nanostructured systems, such as graphene quantum dots (GQDs), are well known for their interesting light-emitting characteristics and are being applied to a variety of luminescence-based applications. The emission properties of GQDs are complex. Therefore, understanding the science of the photophysics of coupled quantum systems (like quantum clusters) is still challenging. In this regard, we have successfully prepared two different types of GQD clusters, and explored their photophysical properties in detail. By co-relating the structure and photophysics, it was possible to understand the emission behavior of the cluster in detail. This gave new insight into understanding the clustering effect on the emission behaviour. The results clearly indicated that although GQDs are well connected, the local discontinuity in the structure prohibits the dynamics of photoexcited charge carriers going from one domain to another. Therefore, an excitation-sensitive dual emission was possible. Emission yield values of about 18% each were recorded at the blue and green emission wavelengths at a particular excitation energy. This meant that the choice of emission color was decided by the excitation energy. Through systematic analysis, it was found that both intrinsic and extrinsic effects contributed to the blue emission, whereas only the intrinsic effect contributed to the green emission. These excitation-sensitive dual emissive GQD clusters were then used to sense Fe 3+ and Cr 6+ ions in the nanomolar range. While the Cr 6+ ions were able to quench both blue and green emissions, the Fe 3+ ions quenched blue emission only. The insensitivity of the Fe 3+ ions in the quenching of the green emission was also understood through quantum chemical calculations., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Rechargeable batteries based on the most abundant elements, such as sodium and iron, have a great potential in the development of cost effective sodium ion batteries for large scale energy storage devices. We report, for the first time, crystallite size dependent structural investigations on maricite-NaFePO 4 through X-ray diffraction, X-ray absorption spectroscopy and theoretical simulations. Rietveld refinement analysis on the X-ray diffraction data reveals that a decrease in the unit cell parameters leads to volume contraction upon reduction in the crystallite size. Further, the atomic multiplet simulations on X-ray absorption spectra provide unequivocally a change in the site symmetry of transition metal ions. The high resolution oxygen K-edge spectra reveal a substantial change in the bonding character with the reduction of crystallite size, which is the fundamental cause for the change in the unit cell parameters of maricite-NaFePO 4 . In parallel, we performed first-principles density functional theory (DFT) calculations on maricite-NaFePO 4 with different sodium ion vacancy concentrations. The obtained structural parameters are in excellent agreement with the experimental observations on the mesostructured maricite-NaFePO 4 . The volumetric changes with respect to crystallite size are related to the compressive strain, resulting in the improvement in the electronic diffusivity. The nano-crystalline maricite-NaFePO 4 with improved kinetics will open a new avenue for its usage as a cathode material in sodium ion batteries.

W/B 4 C multilayers (MLs) consisting of ten layer pairs with varying boron carbide layer thicknesses have been investigated. The ML structures were characterized using grazing-incidence hard X-ray reflectivity (GIXR), resonant soft X-ray reflectivity (RSXR), hard X-ray photoelectron spectroscopy (HAXPES) and X-ray absorption near-edge spectroscopy (XANES). Depth-resolved spectroscopic information on the boron carbide layer in W/B 4 C MLs was extracted with sub-nanometre resolution using reflectivity performed in the vicinity of the B K-edge. Interestingly, these results show that the composition of boron carbide films is strongly dependent on layer thicknesses. HAXPES measurements suggest that most of the boron is in the chemical state of B 4 C in the multilayer structures. XANES measurements suggest an increase in boron content and C-B-C bonding with increase in boron carbide layer thickness.

Importance: Effective treatment options are limited for patients with advanced, metastatic esophageal cancer progressing after 2 or more lines of systemic therapy., Objective: To evaluate the efficacy and safety of pembrolizumab for patients with advanced, metastatic esophageal squamous cell carcinoma (ESCC) or advanced, metastatic adenocarcinoma of the esophagus and gastroesophageal junction that progressed after 2 or more lines of systemic therapy., Design, Setting, and Participants: This phase 2, open-label, interventional, single-arm study, KEYNOTE-180, enrolled 121 patients from January 12, 2016, to March 21, 2017, from 57 sites in 10 countries. Patients had advanced, metastatic esophageal cancer that progressed after 2 or more lines of therapy and had evaluable tumor samples for biomarkers., Interventions: Pembrolizumab, 200 mg, was administered intravenously every 3 weeks until disease progression, unacceptable toxic effects, or study withdrawal, for up to 2 years., Main Outcomes and Measures: Primary end point was objective response rate per the Response Evaluation Criteria in Solid Tumors by central imaging review for all patients., Results: As of September 18, 2017, of 121 enrolled patients (100 men and 21 women; median age, 65 years [range, 33-87 years]), 18 (14.9%) had undergone 3 or more prior therapies, 63 (52.1%) had ESCC, and 58 (47.9%) had tumors positive for programmed death ligand-1 (PD-L1), defined as a combined positive score of 10 or higher assessed by immunohistochemistry. Median duration of follow-up was 5.8 months (range, 0.2-18.3 months). Objective response rate was 9.9% (95% CI, 5.2%-16.7%) among all patients (12 of 121), and median duration of response was not reached (range, 1.9-14.4 months). Objective response rate was 14.3% (95% CI, 6.7%-25.4%) among patients with ESCC (9 of 63), 5.2% (95% CI, 1.1%-14.4%) among patients with adenocarcinoma (3 of 58), 13.8% (95% CI, 6.1%-25.4%) among patients with PD-L1-positive tumors (8 of 58), and 6.3% (95% CI, 1.8%-15.5%) among patients with PD-L1-negative tumors (4 of 63). Overall, 15 patients (12.4%) had treatment-related grade 3 to 5 adverse events. Only 5 patients (4.1%) discontinued treatment because of adverse events. There was 1 treatment-related death from pneumonitis., Conclusions and Relevance: Where effective treatment options are an unmet need, pembrolizumab provided durable antitumor activity with manageable safety in patients with heavily pretreated esophageal cancer. Phase 3 studies evaluating pembrolizumab vs standard therapy for patients with esophageal cancer progressing after first-line therapy or in combination with chemotherapy as first-line therapy for patients with locally advanced unresectable or metastatic esophageal cancer are ongoing., Trial Registration: ClinicalTrials.gov identifier: NCT02559687.

Interfacial interactions between a layer of iron and MgO hold the key to various phenomena like tunnel magnetoresistance, perpendicular magnetic anisotropy, interlayer exchange coupling, observed in the system. Interface structure has been studied in situ during deposition of iron on MgO surface, using soft x-ray absorption spectroscopy (SXAS). Sub-monolayer sensitivity of SXAS, combined with in situ measurements as a function of iron layer thickness, allowed one to study the evolution of interface with film thickness. Two different substrates namely MgO (0 0 1) single crystal, and a polycrystalline MgO film on Si substrate have been used in order to elucidate the role of the state of MgO surface in controlling the interface structure. It is found that at the interface of iron and MgO film, about two monolayers of Fe 3 O 4 are formed. Fe 3 O 4 being the oxide of iron with the highest heat of formation, the reaction appears to be controlled thermodynamically. On the other hand, on the interface with MgO (0 0 1) surface, FeO is formed, suggesting that the reaction is limited by the availability of oxygen atoms. Magnetic behavior of the FeO layer gets modified significantly due to proximity effect of the bulk ferromagnetic iron layer.

The electronic structure of double perovskite Pr 2 MnNiO 6 was studied using core x-ray photoelectron spectroscopy and x-ray absorption spectroscopy. The 2p x-ray absorption spectra show that Mn and Ni are in 4+  and 2+  states respectively. Based on charge transfer multiplet analysis of the 2p XPS spectra of both ions, we find charge transfer energies [Formula: see text] of 3.5 and 2.5 eV for Ni and Mn respectively. The ground state of Ni 2+ and Mn 4+ ions reveal a higher d electron count of 8.21 and 3.38 respectively as compared to the ionic values. The partial density of states clearly show a charge transfer character of the system for U  -  J [Formula: see text] 2 eV. The O 1s edge absorption spectra reveal a band gap of 0.9 eV, which is close to the value estimated from analysis of Ni and Mn 2p photoemission and absorption spectra. The combined analysis of nature of spectroscopic data and first principles calculations reveal that the material is a p  -  d type charge transfer insulator with an intermediate covalent character according to the Zannen-Sawatzy-Allen phase diagram.

Ion beam irradiation technique has been proposed, for efficient, fast and eco-friendly reduction of graphene oxide (GO), as an alternative to the conventional methods. 5 MeV, Au + ion beam has been used to reduce the free standing GO flake. Both electronic and nuclear energy loss mechanisms of the irradiation process play a major role in removal of oxygen moieties and recovery of graphene network. Atomic resolution scanning tunnelling microscopy analysis of the irradiated GO flake shows the characteristic honeycomb structure of graphene. X-ray absorption near edge structure analysis at C K-edge reveals that the features of the irradiated GO flake resemble the few layer graphene. Resonant Rutherford backscattering spectrometry analysis evidenced an enhanced C/O ratio of ∼23 in the irradiated GO. In situ sheet resistance measurements exhibit a sharp decrease of resistance (few 100 s of Ω) at a fluence of 6.5 × 10 14 ions cm -2 . Photoluminescence spectroscopic analysis of irradiated GO shows a sharp blue emission, while pristine GO exhibits a broad emission in the visible-near IR region. Region selective reduction, tunable electrical and optical properties by controlling C/O ratio makes ion irradiation as a versatile tool for the green reduction of GO for diverse applications.

The tunable electronic, electrical and optical properties of graphene oxide (GO) sheets were investigated using a controlled reduction by 500 keV Ar + -ion irradiation. The carbon to oxygen ratio of the GO sheets upon the ion beam reduction has been estimated using resonant Rutherford backscattering spectrometry analyses and its effect on the electrical and optical properties of GO sheets has been studied using sheet resistance measurements and photoluminescence (PL) measurements. The restoration of sp 2 -hybridized carbon atoms within the sp 3 matrix is found to be increases with increasing the Ar + -ion fluences as evident from Fourier transform infrared, and x-ray absorption near-edge structure measurements. The decrease in the number of disorder-induced local density of states (LDOSs) within the π-π* gap upon the reduction causes the shifting of PL emission from near infra-red to blue region and decreases the sheet resistance. The improved electrical and optical properties of GO sheets were correlated to the decrease in the number of LDOSs within the π-π* gap. Our experimental investigations suggest ion beam irradiation is one of an effective approaches to reduce GO to RGO and to tailor its electronic, electrical and optical properties.

Glucal with different alcohols can be converted into the corresponding 2-deoxy glycosides without Ferrier rearrangement in high yield by treatment with eco friendly transition metal based catalysts [CuCl 3 ·2H 2 O-NaI (A) or CeCl 3 ·7H 2 O-NaI (B)] and chiral amine ligand L-proline at various reaction conditions which were optimized for stereoselectivity. The catalyst CeCl 3 ·7H 2 O-NaI (B) and ligand L-proline in toluene, was found to be much more efficient and high atom economic for the stereoselective glycosidation of propargyl alcohol with glucal, afforded exclusively α-2-deoxy propargyl glycoside in 98% optimized yield. The ligand L-proline was used for the first time in stereoselective glycosidation of α-2-deoxy glycosides involving glucal and alcohols., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Graphene has been studied intensively in opto-electronics, and its transport properties are well established. However, efforts to induce intrinsic optical properties are still in progress. Herein, we report the production of micron-sized sheets by interconnecting graphene quantum dots (GQDs), which are termed 'GQD solid sheets', with intrinsic absorption and emission properties. Since a GQD solid sheet is an interconnected QD system, it possesses the optical properties of GQDs. Metal atoms that interconnect the GQDs in the bottom-up hydrothermal growth process, induce the semiconducting behaviour in the GQD solid sheets. X-ray absorption measurements and quantum chemical calculations provide clear evidence for the metal-mediated growth process. The as-grown graphene quantum dot solids undergo a Forster Resonance Energy Transfer (FRET) interaction with GQDs to exhibit an unconventional 36% photoluminescence (PL) quantum yield in the blue region at 440 nm. A high-magnitude photocurrent was also induced in graphene quantum dot solid sheets by the energy transfer process.

Two new compounds 1 (Methyl 26-di-deoxy-6-methyl-β-D-allohexopyranoside) and 3 (3, 11, 12, 20 tetra-O-acetyl-pregn-5-ene-14β-ol) have been isolated from the chloroform-soluble extract of the whole plant of Marsdenia roylei (family: Asclepiadaceae) and their structures were determined by 1D, 2D NMR and ESI-MS as well as by chemical modification. We have calculated the molecular geometries, local reactivity descriptors by the density functional theory with B3LYP functional with basis set 6-311G+(d,2p) of 1, 3 and 4 (deacylated 3). The 1 H and 13 C NMR chemical shifts of 1, 3 and 4 were calculated using Gauge-Including Atomic Orbital approach and these values are correlated with the experimental observations.

The present study investigates the effect of gradient doping on modifying the photoelectrochemical response of Ti-doped Fe 2 O 3 photoanodes for their use in sunlight based water splitting for hydrogen evolution. The deposition of a thin film over the ITO (tin doped indium oxide) substrate was carried out using a spray pyrolysis method. The concentration of dopant was varied from 0.5-8.0 at% and two sets of samples were also prepared with low to high (0.5-8%) and high to low (8-0.5%) dopant concentrations in the direction towards the substrate. The prepared thin films were characterized using X-ray Diffractometry (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDX) Spectroscopy, Secondary Ion Mass Spectroscopy (SIMS), X-ray Photoelectron Spectroscopy (XPS) and UV-visible Spectroscopy. The photoelectrochemical studies revealed that the deposition of dopant layers with a low to high concentration towards the substrate exhibited a highly improved photoresponse (200 times) in comparison to the pristine sample and a two fold enhancement in comparison to 2% Ti-doped Fe 2 O 3 . The improvement in the photoresponse has been attributed to the values of a high flat band potential, low resistance, high open circuit voltage, carrier separation efficiency, applied bias photon-to-current conversion efficiency (ABPE), and incident photon-to-current conversion efficiency (IPCE). A reduced charge transfer resistance has been demonstrated with Nyquist plots.

The structures of two novel steroidal derivatives (1 and 4) were elucidated. Steroidal derivatives namely fologenin (1) and hoyagenin (4) have been isolated from chloroform-soluble extract of the whole plant of Hoya longifolia (family: Asclepiadaceae), and their structures were determined by using (1)H NMR, (13)C NMR, (1)H-(1)H COSY and FAB-MS techniques as well as chemical degradation and derivatisation.

Silver/tungsten oxide multi-layer films are deposited over quartz substrates by RF magnetron sputtering technique and the films are annealed at temperatures 200, 400 and 600°C. The effect of thermal annealing on the phase evolution of silver tungstate phase in Ag/WO3 films is studied extensively using techniques like X-ray diffraction, micro-Raman analysis, atomic force microscopy and photoluminescence studies. The XRD pattern of the as-deposited film shows only the peaks of cubic phase of silver. The film annealed at 200°C shows the presence of XRD peaks corresponding to orthorhombic phase of Ag2WO4 and peaks corresponding to cubic phase of silver with reduced intensity. It is found that, as annealing temperature increases, the volume fraction of Ag decreases and that of Ag2WO4 phase increases and becomes highest at a temperature of 400°C. When the temperature increases beyond 400°C, the volume fraction of Ag2WO4 decreases, due to its decomposition into silver and oxygen deficient phase Ag2W4O13. The micro-Raman spectra of the annealed films show the characteristic bands of tungstate phase which is in agreement with XRD analysis. The surface morphology of the films studied by atomic force microscopy reveals that the particle size and r.m.s roughness are highest for the sample annealed at 400°C. In the photoluminescence study, the films with silver tungstate phase show an emission peak in blue region centered around the wavelength 441 nm (excitation wavelength 256 nm)., (Copyright © 2015 Elsevier B.V. All rights reserved.)

In this work we studied Ag surfactant induced growth of Cu/Co multilayers. The Cu/Co multilayers were deposited using Ag surfactant by the ion beam sputtering technique. It was found that Ag surfactant balances the asymmetry between the surface free energies of Cu and Co. As a result, the Co-on-Cu and Cu-on-Co interfaces become sharp and symmetric and thereby improve the thermal stability of the multilayer. On the basis of obtained results, a mechanism leading to symmetric and stable interfaces in Cu/Co multilayers is discussed.

The problem of predicting the enzymes and non-enzymes from the protein sequence information is still an open problem in bioinformatics. It is further becoming more important as the number of sequenced information grows exponentially over time. We describe a novel approach for predicting the enzymes and non-enzymes from its amino-acid sequence using artificial neural network (ANN). Using 61 sequence derived features alone we have been able to achieve 79 percent correct prediction of enzymes/non-enzymes (in the set of 660 proteins). For the complete set of 61 parameters using 5-fold cross-validated classification, ANN model reveal a superior model (accuracy = 78.79 plus or minus 6.86 percent, Q(pred) = 74.734 plus or minus 17.08 percent, sensitivity = 84.48 plus or minus 6.73 percent, specificity = 77.13 plus or minus 13.39 percent). The second module of ANN is based on PSSM matrix. Using the same 5-fold cross-validation set, this ANN model predicts enzymes/non-enzymes with more accuracy (accuracy = 80.37 plus or minus 6.59 percent, Q(pred) = 67.466 plus or minus 12.41 percent, sensitivity = 0.9070 plus or minus 3.37 percent, specificity = 74.66 plus or minus 7.17 percent).

Currently several institutes worldwide are working on the development of a new generation of ultracold neutron (UCN) sources. In parallel with source development, new materials for guiding and storage of UCN are developed. Currently the best results have been achieved using (58)Ni, Be, solid O2 and low temperature Fomblin oil (LTF). All of these materials have their shortcomings like cost, toxicity or difficulty of use. A novel very promising material is diamond like carbon (DLC). Several techniques exist to coat surfaces, and industrial applications (e.g., for extremely hard surfaces) are already wide spread. Preliminary investigations using neutron reflectometry at PSI and Los Alamos yielded a critical velocity for DLC of about 7 m/s thus comparable to Beryllium. A low upper limit of depolarization probability for stored polarized UCN has been measured at the PF2 facility of the Institut Laue-Langevin (ILL) by North Carolina State University (NCSU), Los Alamos National Laboratory (LANL), and Petersburg Nuclear Physics Institute (PNPI), thus making it also a good material for storage and guidance of polarized UCN. Still missing is the loss probability per bounce. We will be able to extract this number and a more stringent value for the depolarization from our experiment thus proving the suitability of DLC as a wall material for a wide range of UCN applications.

The time course of reported illnesses (epidemic curve) in the 1993 Milwaukee outbreak of cryptosporidiosis was analysed using a dynamic model considering time variant force of infection and incubation time distributions. Different functional forms for the force of infection and incubation time distribution were tested. The resulting model is a coupled integro-differential equation system. These models gave a good fit to the data, although depending upon the functional forms of the underlying distributions, different incubation time and force of infection curves were obtained. However there was reasonable agreement with respect to a baseline illness rate that existed. This demonstrates that useful information may be obtained in this manner, although it should be supplemented with other data (e.g. serology) for a precise assessment of dynamics of disease occurrence during waterborne epidemic conditions.