Search

This research provides a review of seated shot put alongside new data from the Tokyo 2020 Paralympic Games with the aim to understand the latest trends in equipment within a recently established rule set and how key equipment variables may impact performance for athletes in different classifications. First, a review of the literature found that the throwing pole is a key equipment aid that is not well understood, in part due to limitations in testing design. New data from the 2020 Paralympic Games showed inconsistent trends for the use of the throwing pole among athletes, particularly in transitionary classes (F33-34 and F54-55). A two-way analysis of variance found a main effect of classification on performance (p < .001), as well as an interaction effect between pole use and classification on performance (p < .05). Notably, pole users are seen to perform better than non-pole users in Class F32 (p < .05).

Prediction of propulsion kinematics and performance in wheelchair sports has the potential to improve capabilities of individual wheelchair prescription while minimizing testing requirements. While propulsion predictions have been developed for daily propulsion, these have not been extended for maximal effort in wheelchair sports. A two step-approach to predicting the effects of changing set-up in wheelchair rugby was developed, consisting of: (One) predicting propulsion kinematics during a 5 m sprint by adapting an existing linkage model; and (Two) applying partial least-squares regression to wheelchair set-up, propulsion kinematics, and performance. Eight elite wheelchair rugby players completed 5 m sprints in nine wheelchair set-ups while varying seat height, seat depth, seat angle, and tire pressure. Propulsion kinematics (contact and release angles) and performance (sprint time) were measured during each sprint and used for training and assessment for both models. Results were assessed through comparison of predicted and experimental propulsion kinematics (degree differences) for Step One and performance times (seconds differences) for Step Two. Kinematic measures, in particular contact angles, were identified with mean prediction errors less than 5 degrees for 43 of 48 predictions. Performance predictions were found to reflect on-court trends for some players, while others showed weaker prediction accuracy. More detailed modeling approaches that can account for individual athlete activity limitations would likely result in improved accuracy in propulsion and performance predictions across a range of wheelchair sports. Although this would come at an increased cost, developments would provide opportunities for more suitable set-ups earlier in an athlete's career, increasing performance and reducing injury risk., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Haydon, Pinder, Grimshaw, Robertson and Holdback.)

Prescription of wheelchair rugby chairs is difficult due to the range of athlete impairment types and severities in the sport, difficulty in adjusting wheelchair settings, and assessing on-court performance. Currently, elite players rely on experiential knowledge (personal, coaches, and support staff) to select an appropriate set-up. Technological advancements, such as with inertial measurement units and processing algorithms, and representative testing approaches, has improved the potential for assessing set-ups at an individual level. An orthogonal design approach was implemented using an adjustable wheelchair to investigate the effect of seat height, seat depth, seat angle, and tyre pressure on performance, mobility, and propulsion kinematics. Six elite wheelchair rugby players completed testing in nine individually tailored wheelchair set-ups while monitoring both quantitative and qualitative measures of performance. From this testing, a recommended set-up was compared with the current set-up for each individual. A single case-study approach shows how the assessment method identifies parameter settings that can potentially improve performance. Three of six players reported a blind preference for the recommended set-up over the current set-up, whilst remaining players often displayed similar performance between their current and recommended set-ups. This approach can improve upon the current prescription process for rugby wheelchairs.

Due to the detrimental influence of unnecessary mass on performance, racing wheelchair instrumentation used in both competition assessment and research is currently limited. Attaining key kinetic parameters of propulsion can enhance technique and provide athletes with a competitive advantage. This research examined the plausibility of inertial measurement units (IMUs) to estimate propulsion forces, during a simulated wheelchair race start and training. Start propulsion data calculated from an IMU system was compared to reference force plate data; steady state motion data was compared with existing literature. Some agreement in kinetic parameters between IMU data was observed under steady state motion, with data from athletes following a linear force-velocity relationship. In this context, it is important to identify that this cannot be directly compared to the existing literature due to the different methods of force measurement and the lack of data for similar force measurements using IMUs. IMUs were ineffective when used with wheelchairs having spoked wheels. Performance was best for measurements in the direction of motion. Although exact agreement was not observed, the IMU can provide an effective tool in the in-field assessment of propulsion kinetics.

Inertial measurement units (IMUs) provide a practical solution for attaining key performance data for wheelchair sports. The effects of IMU placement position on the identification of propulsion characteristics are unknown. The aim of this study was to determine the variability in the reliability of cycle time measurements (time between hand contacts) across IMU locations on the chair frame (axle housings), and wheels (axle, push rim, outer rim), on both the left and right sides ( n  = 8). Contacts were defined by spikes in the resultant acceleration data, corresponding to impact between the hands and push rim, and verified against motion capture. Five elite wheelchair racing athletes propelled at racing speeds on a treadmill. Excellent inter-rater Intraclass Correlation Coefficient values indicated high reliability and repeatability for both motion capture and IMU signal analysis approaches ( R  = 0.997, p  < 0.001 and R  = 0.990, p  < 0.001, respectively). The best results were (as determined by the best between method agreement) were observed for IMUs located on the frame. Detection reliability was positively associated with signal-to-noise ratio of the acceleration data. The IMU assessment approach facilitates an automated processing capability, which is an improvement to the currently used video analysis.

The anthropometries of elite wheelchair racing athletes differ from the generic, able-bodied anthropometries commonly used in computational biomechanical simulations. The impact of using able-bodied parameters on the accuracy of simulations involving wheelchair racing is currently unknown. In this study, athlete-specific mass segment inertial parameters of the head and neck, torso, upper arm, forearm, hand, thigh, shank, and feet for five elite wheelchair athletes were calculated using dual-energy X-ray absorptiometry (DXA) scans. These were compared against commonly used anthropometrics parameters of data presented in the literature. A computational biomechanical simulation of wheelchair propulsion using the upper extremity dynamic model in opensim assessed the sensitivity of athlete-specific mass parameters using Kruskal-Wallis analysis and Spearman correlations. Substantial between-athlete body mass distribution variances (thigh mass between 7.8% and 22.4% total body mass) and between-limb asymmetries (<62.4% segment mass; 3.1 kg) were observed. Compared to nonathletic able-bodied anthropometric data, wheelchair racing athletes demonstrated greater mass in the upper extremities (up to 3.8% total body mass) and less in the lower extremities (up to 9.8% total body mass). Computational simulations were sensitive to individual body mass distribution, with joint torques increasing by up to 31.5% when the scaling of segment masses (measured or generic) differed by up to 2.3% total body mass. These data suggest that nonathletic, able-bodied mass segment inertial parameters are inappropriate for analyzing elite wheelchair racing motion., (Copyright © 2019 by ASME.)

Objectives: Use a task vehicle of sprint testing in wheelchair rugby (WCR) to explore the impact of small changes to test design using both group and individual analysis., Design: Exploratory, repeated measures, on-court study METHOD: 25 national or international level wheelchair rugby players completed 5×5m sprints under two conditions: (i) an acceleration from standstill in their own time, and (ii) an 'active' start, simulating a key aspect of performance. Video analysis and accelerometer data were used to measure key kinematic and performance variables with a focus on the first three strokes. Each player was grouped into a high-, mid-, or low-point group based on their sport-specific classification score. Group (paired sample t-tests) and individual (meaningful differences, performance coefficients, and Cohen's d effect sizes) analysis assessed differences between the two conditions., Results: The low-point classification group performed significantly slower in the active start (p<0.05). There were no differences in sprint time for the high- and mid-point groups. Mid-point players achieved greater peak accelerations for strokes two and three in the active start (p<0.05). Individual sprint performances varied substantially, ranging from 8% decrease to 14% increase in sprint time for the active start. Meaningful differences in peak accelerations were demonstrated for 23 out of the 25 players., Conclusions: Small amendments to test design can lead to significant differences in individual athlete performance. Traditional group analyses masked important individual responses to testing conditions. There is need to further consider representative test design, and individual analysis for monitoring physical and skill performance., (Copyright © 2018 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.)

Purpose: Maximal acceleration from standstill has been identified as a key performance indicator in wheelchair rugby; however, the impact of classification and kinematic variables on performance has received limited attention. This study aimed to investigate kinematic variables during maximal acceleration, with level of activity limitation accounted for using sport-classification scores., Methods: Based on their sporting classification scores, which reflect combined trunk, arm, and hand function, 25 elite wheelchair rugby players were analyzed in high-, mid-, and low-point groups before completing five 5-m sprints from a stationary position. Inertial measurement units and video analysis were used to monitor key kinematic variables., Results: Significant differences in kinematic variables were evident across the classification groups, particularly for the first stroke-contact angle (1-way ANOVA F 2,122  = 51.5, P < .05) and first stroke time (F 2,124  = 18.3, P < .05). High-point players used a first stroke-contact angle that was closer to top dead center of the wheel than either other group, while also using a shorter overall stroke time than low-point players. A linear mixed-effects model was used to investigate how kinematic variables influenced performance, with results suggesting that increased release angles (ie, farther around the wheel) and decreased stroke angles resulted in larger peak accelerations. Further investigation revealed that these results are likely influenced by strong relationships for the high-point group, as there was often no clear trend evident for midpoint and low-point groups., Conclusion: Findings show that various propulsion approaches exist across classification groups, with this information potentially informing individual wheelchair setups and training programs.

Background: This study examined relationships between adiposity, physical functioning, and physical activity., Methods: Obese (N = 107) and healthy-weight (N = 132) children aged 10-13 years underwent assessments of percent body fat (%BF, dual energy X-ray absorptiometry); knee extensor strength (KE, isokinetic dynamometry); cardiorespiratory fitness (CRF, peak oxygen uptake by cycle ergometry); physical health-related quality of life (HRQOL); and worst pain intensity and walking capacity [six-minute walk (6MWT)]. Structural equation modelling was used to assess relationships between variables., Results: Moderate relationships were observed between %BF and (1) 6MWT, (2) KE strength corrected for mass, and (3) CRF relative to mass (r -0.36 to -0.69, p ≤ 0.007). Weak relationships were found between %BF and physical HRQOL (r -0.27, p = 0.008); CRF relative to mass and physical HRQOL (r -0.24, p = 0.003); physical activity and 6MWT (r 0.17, p = 0.004). Squared multiple correlations showed that 29.6% variance in physical HRQOL was explained by %BF, pain, and CRF relative to mass; while 28.0% variance in 6MWT was explained by %BF and physical activity., Conclusions: It appears that children with a higher body fat percentage have poorer KE strength, CRF, and overall physical functioning. Reducing percent fat appears to be the best target to improve functioning. However, a combined approach to intervention, targeting reductions in body fat percentage, reductions in pain, and improvements in physical activity and CRF may assist physical functioning.

The modern golf swing is a complex and asymmetrical movement that places an emphasis on restricting pelvic turn while increasing thorax rotation during the backswing to generate higher clubhead speeds at impact. Increasing thorax rotation relative to pelvic rotation preloads the trunk muscles by accentuating their length and allowing them to use the energy stored in their elastic elements to produce more power. As the thorax and pelvis turn back towards the ball during the downswing, more skilled golfers are known to laterally slide their pelvis toward the target, which further contributes to final clubhead speed. However, despite the apparent performance benefits associated with these sequences, it has been argued that the lumbar spine is incapable of safely accommodating the forces they produce. This notion supports a link between the repeated performance of the golf swing and the development of golf-related low back injuries. Of the complaints reported by golfers, low back injuries continue to be the most prevalent, but the mechanism of these injuries is still poorly understood. This review highlights that there is a paucity of research directly evaluating the apparent link between the modern golf swing and golf-related low back pain. Furthermore, there has been a general lack of consensus within the literature with respect to the methods used to objectively assess the golf swing and the methods used to derived common outcome measures. Future research would benefit from a clear set of guidelines to help reduce the variability between studies.

Injuries are common within military populations, with high incidence rates well established in the literature. Injuries cause a substantial number of working days lost, a significant cost through compensation claims and an increased risk of attrition. In an effort to address this, a considerable amount of research has gone into identifying the most prevalent types of injury and their associated risk factors. Collective evidence suggests that training and equipment contribute to a large proportion of the injuries sustained. In particular, the large loads borne by soldiers, the high intensity training programs and the influence of footwear have been identified as significant causative factors of lower limb injury in military populations. A number of preventative strategies have been developed within military bodies around the world to address these issues. The relative success of these strategies is highly variable; however, with advancements in technology, new approaches will become available and existing strategies may become more effective.

Background Context: The golf swing exposes the spine to complex torsional, compressive, and shearing loads that increase a player's risk of injury. The crunch factor (CF) has been described as a measure to evaluate the risk of low back injuries in golfers and is based on the notion that lateral flexion and axial trunk rotation jointly contribute to spinal degeneration. However, few studies have evaluated the appropriateness of this measure in golfers with low back pain (LBP)., Purpose: To objectively examine the usefulness of the CF as a measure for assessing the risk of low back injury in golfers., Study Design: Field-based research using a cross-sectional design., Methods: This research used three-dimensional motion analysis to assess the golf swings of 12 golfers with LBP and 15 asymptomatic controls. Three-dimensional kinematics were derived using Vicon Motus, and the CF was calculated as the instantaneous product of axial trunk rotation velocity and lateral trunk flexion angle., Results: Maximum CFs and their timings were not significantly different between the symptomatic and asymptomatic groups. Furthermore, for those golfers who produced higher CFs (irrespective of the group), the increased magnitude could not be attributed to an increased axial angular trunk velocity or lateral flexion angle, but rather to a concomitant increase in both of these variables., Conclusions: The findings suggested that although the fundamental concepts that underpin the CF seem sensible, this measure does not appear to be sensitive enough to distinguish golfers with LBP from the asymptomatic players., (Copyright © 2014 Elsevier Inc. All rights reserved.)

The purpose of this study was to investigate if obese children have reduced knee extensor (KE) strength and to explore the relationship between adiposity and KE strength. An observational case-control study was conducted in three Australian states, recruiting obese [N = 107 (51 female, 56 male)] and healthy-weight [N = 132 (56 female, 76 male)] 10- to 13-year-old children. Body mass index, body composition (dual energy X-ray absorptiometry), isokinetic/isometric peak KE torques (dynamometry) and physical activity (accelerometry) were assessed. Results revealed that compared with their healthy-weight peers, obese children had higher absolute KE torques (P ≤ 0.005), equivocal KE torques when allometrically normalized for fat-free mass (FFM) (P ≥ 0.448) but lower relative KE torques when allometrically normalized for body mass (P ≤ 0.008). Adjustments for maternal education, income and accelerometry had little impact on group differences, except for isometric KE torques relative to body mass which were no longer significantly lower in obese children (P ≥ 0.013, not significant after controlling for multiple comparisons). Percent body fat was inversely related to KE torques relative to body mass (r = -0.22 to -0.35, P ≤ 0.002), irrespective of maternal education, income or accelerometry. In conclusion, while obese children have higher absolute KE strength and FFM, they have less functional KE strength (relative to mass) available for weight-bearing activities than healthy-weight children. The finding that FFM-normalized KE torques did not differ suggests that the intrinsic contractile properties of the KE muscles are unaffected by obesity. Future research is needed to see if deficits in KE strength relative to mass translate into functional limitations in weight-bearing activities.

Background: Isokinetic dynamometry is a widely used tool for measuring muscle strength in clinical intervention and rehabilitation as well as research in children., Objective: To assess the test-retest reliability of knee flexor/extensor strength using the Biodex Multi-Joint System 4 Isokinetic Dynamometer in children., Methods: Peak isometric knee extensor (KE) and peak isokinetic knee flexor (KF) torques of the dominant and nondominant limbs were assessed twice in 11 children aged 10 to 13 yrs, 7 to 10 days apart., Results: Peak torques were higher in the dominant limb (p ≤ 0.006). Peak isometric KE torque was 8.4% higher (SEM 2.5%) at the second testing session, but there was no interaction with the limb tested (p > 0.2). Peak isokinetic KE/KF torque ratios agreed well between tests and had intraclass correlation coefficients (ICCs) of 0.96., Conclusions: The dynamometer provides a reliable means of assessing knee strength in 10 to 13 year olds, with excellent test-retest reliability for isokinetic KE/KF. A learning effect occurred when assessing isometric torque, indicating the importance of habituation for this measure.

Objective: To critically appraise the Biodex System 4 isokinetic dynamometer for strength assessment of children., Methods: Appraisal was based on experiences from two independent laboratories involving testing of 213 children. Issues were recorded and the manufacturer was consulted regarding appropriate solutions., Results: The dynamometer had insufficient height adjustment for alignment of the knee for some children, requiring the construction of padding to better fit the child within the dynamometer. Potential for entrapment of the non-testing leg was evident in the passive and eccentric modes and a leg bracket restraint was constructed. Automated gravity correction did not operate when protocols were linked or data was exported to an external device., Conclusions: Limitations were noted, some of which were applicable to knee strength testing in general and others which were specific to use with children. However, most of these obstacles could be overcome, making the Biodex System 4 suitable for assessment of knee strength in children., (© 2011 - IOS Press and the authors. All rights reserved)

The benefits of creatine (CR) supplementation are well documented, particularly during repeated bouts of high-intensity muscular activity. Most published experiments use mass-supported (cycle ergometry) activities as a means of evaluating creatine's efficacy, therefore minimizing any possible adverse effects of increased body mass associated with CR supplementation. This study aims to use both mass-supported and mass-dependent activities to assess the effectiveness of acute CR supplementation on a group of highly trained rugby players. A randomized, double-blind, crossover research design was utilized, with subjects receiving 20 g.d(-1) x 5 d of both CR and a glucose placebo (PL). Subjects were assessed via 10 x 6-second Wingate test and a 10 x 40-m sprint test on separate days, presupplementation and postsupplementation. A 28-d washout period separated the two treatments. No significant treatment (p > 0.05) or treatment by test interaction effects (p > 0.05) were observed for peak or minimum power output (W), peak or minimum running velocity (m.s(-1)), or fatigue index (%). No significant differences (p > 0.05) were found postsupplementation for body mass and percentage body fat. Although statistical significance was not achieved for any of the measured parameters, there were small improvements in performance that may be of benefit to rugby players.