Search

Current protein-based therapies often rely on intravenous and subcutaneous injections leading to patient discomfort due to the need for frequent administration. Oral administration route presents a more patient-friendly alternative, but overcoming the challenge of low drug bioavailability remains paramount. This limitation is primarily attributed to protein degradation in the harsh gastric environment, enzymatic breakdown, and poor intestinal permeability. With their unique properties, such as high porosity and surface area, and easy scalability, aerogels offer a promising platform for oral delivery of therapeutic proteins. This study focused on the development and characterization of both conventional and core-shell aerogels derived from natural polysaccharides for the oral delivery of insulin, utilizing Humulin R® U-100 as the insulin source for the first time. Aerogels were produced via supercritical carbon dioxide (sc-CO 2 ) drying of alginate gel beads. Scanning Electron Microscopy (SEM) images confirmed that the core-shell aerogels had higher uniformity in size and a more well-defined porous structure in comparison to conventional aerogels. Structural differences of two alginate sources were evaluated by Fourier Transform Infrared (FTIR) spectroscopy. A notable difference in encapsulation efficiencies was observed between conventional (12 %) and core-shell (53 %) aerogels, highlighting the superior carrier characteristics of the latter ones. In vitro insulin release profiles from the core-shell aerogels demonstrated their potential suitability for delivering regular/short-acting insulin therapeutics since only 30 % of insulin was released in Simulated Gastric Fluid (SGF) after 120 min, whereas 60 % of insulin was released in Simulated Intestinal Fluid (SIF) within the first hour followed by a sustained release stage., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

In the present study, the nematicidal and fungicidal activity of the biosurfactant (BS) produced by the strain Serratia ureilytica UTS was evaluated. The highest mortality of J2 juveniles of the nematode Nacobbus aberrans was 92.3% at a concentration of 30 mg/mL. Among the phytopathogenic fungi, the concentration of 1.0% of the crude extract of the biosurfactant was the one that obtained the highest percentage inhibition against the phytopathogens Fusarium oxysporum 72.2%, Fusarium sp., 80.2% and Alternaria solani 100% at 168 h of incubation. Analysis of the BS by GC-MS revealed the presence of the three amino acids alanine, homocystine and valine in its composition. As well as the presence of fatty acids: stearic acid, lauric acid and palmitic acid. With nuclear magnetic resonance (NMR) and mass spectrophotometry (MS) analysis, the crude extract was found to have the structure of a quaternary ammonium salt derived from stearic fatty acid, which is a component of the biosurfactant. Based on this evidence, it is suggested that the BS produced by S. ureilytica has a lipopeptide-like chemical structure and possesses nematicidal and fungicidal activity, and is therefore proposed for potential use and application as a biopesticide for the benefit of regenerative and sustainable agriculture., Competing Interests: Declarations. Conflict of interests: On behalf of all authors, the corresponding author states that there is no conflict of interest., (© 2025. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

In this work, starch-based porous cryogels with controlled mechanical and electrical properties were prepared for tissue engineering applications. The starch cryogels were formulated using κ-carrageenan, poly(vinyl alcohol) (PVA), and styrylpyridinium-substituted PVA (SbQ) into the composite. A conductive cryogel was polymerized by chemical oxidation of 3,4-ethylenedioxythiophene (EDOT) using iron(III) p-toluenesulfonate as a strategy to control the electrical properties. The physical, thermal, and mechanical properties were evaluated for the obtained composites. Macro- and nanoscale results confirmed the capability of tuning the mechanical properties of the material by the addition of biopolymers in different contents. The presence of κ-carrageenan significantly increased the storage modulus and decreased the damping effect in the formulations. The presence of PVA showed a plasticizing effect in the formulations, confirmed by the buffering effect and an increase in storage modulus. PVA-SBQ improved the mechanical properties by cross-linking. The addition of PEDOT increased the mechanical and electrical properties of the obtained materials., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Background: The tropical gar (Atractosteus tropicus), a member of the Lepisosteidae family, is native to regions extending from southeastern Mexico to southern Costa Rica. This species serves as a unique bridge between tetrapods and teleosts due to its phylogenetic position, slow evolutionary rate, dense genetic map, gene similarities with humans, and ease of laboratory cultivation. As a taxonomic sister group to teleosts like the zebrafish (Danio rerio), known for its high regenerative capacity, it remains unclear whether the tropical gar shares a similar ability for regeneration., Results: This study aims to elucidate the caudal fin regeneration process in tropical gar through skeletal and histological staining methods. Juvenile specimens were observed over a two-month period, during which they were fed brine shrimp, and anesthetized with 1% eugenol for caudal fin amputation. Samples were collected at various days post-amputation (dpa). Alcian blue and alizarin red staining were used to highlight skeletal regeneration, particularly the formation of new cartilage, while histological staining with hematoxylin and eosin was performed to observe tissue regeneration at the amputation site., Conclusions: The findings reveal a remarkable ability for caudal fin regeneration in juvenile tropical gar. Given the Garfish evolutionary relationship with teleosts, this opens new avenues for research into tissue regeneration across different groups of Actinopterygii., (© 2024. The Author(s).)

Aerogel scaffolds are nanostructured materials with beneficial properties for tissue engineering applications. The tracing of the state of the aerogels after their implantation is challenging due to their variable biodegradation rate and the lack of suitable strategies capable of in vivo monitoring the scaffolds. Upconversion nanoparticles (UCNPs) have emerged as advanced tools for in vitro bioimaging because of their fluorescence properties. In this work, highly fluorescent UCNPs were loaded into aerogels to obtain theranostic implants for tissue engineering and bioimaging applications. 3D-printed alginate-hydroxyapatite aerogels labeled with UCNPs were manufactured by 3D-printing and supercritical CO 2 drying to generate personalize-to-patient aerogels. The physicochemical performance of the resulting structures was evaluated by printing fidelity measurements, nitrogen adsorption-desorption analysis, and different microscopies (confocal, transmission and scanning electron microscopies). Stability of the aerogels in terms of physicochemical properties was also tested after 3 years of storage. Biocompatibility was evaluated in vitro by different cell and hemocompatibility assays, in ovo and in vivo by safety and bioimaging studies using different murine models. Cytokines profile, tissue index and histological evaluations of the main organs unveiled an in vivo downregulation of the inflammation after implantation of the scaffolds. UCNPs-decorated aerogels were first-time manufactured and long-term traceable by fluorescence-based bioimaging until 3 weeks post-implantation, thereby endorsing their suitability as tissue engineering and theranostic nanodevices (i.e. bifunctional implants)., Competing Interests: All authors disclose no actual or potential conflict of interest related with any financial and personal relationships with other people or organizations that could inappropriately influence, or be perceived to influence, this work., (© 2024 The Authors.)

Additive manufacturing (AM) is widely recognized as a versatile tool for achieving complex geometries and customized functionalities in designed materials. However, the challenge lies in selecting an appropriate AM method that simultaneously realizes desired microstructures and macroscopic geometrical designs in a single sample. This study presents a direct ink writing method for 3D printing intricate, high-fidelity macroscopic cellulose aerogel forms. The resulting aerogels exhibit tunable anisotropic mechanical and thermal characteristics by incorporating fibers of different length scales into the hydrogel inks. The alignment of nanofibers significantly enhances mechanical strength and thermal resistance, leading to higher thermal conductivities in the longitudinal direction (65 mW m -1  K -1 ) compared to the transverse direction (24 mW m -1  K -1 ). Moreover, the rehydration of printed cellulose aerogels for biomedical applications preserves their high surface area (≈300 m 2  g -1 ) while significantly improving mechanical properties in the transverse direction. These printed cellulose aerogels demonstrate excellent cellular viability (>90% for NIH/3T3 fibroblasts) and exhibit robust antibacterial activity through in situ-grown silver nanoparticles., (© 2024 The Authors. Advanced Science published by Wiley‐VCH GmbH.)

The increasing demand for innovative approaches in wound healing and skin regeneration has prompted extensive research into advanced biomaterials. This review focuses on showcasing the unique properties of sustainable silk-based particulate systems in promoting the controlled release of pharmaceuticals and bioactive agents in the context of wound healing and skin regeneration. Silk fibroin and sericin are derived from well-established silkworm production and constitute a unique biocompatible and biodegradable protein platform for the development of drug delivery systems. The controlled release of therapeutic compounds from silk-based particulate systems not only ensures optimal bioavailability but also addresses the challenges associated with conventional delivery methods. The multifaceted benefits of silk proteins, including their inherent biocompatibility, versatility, and sustainability, are explored in this review. Furthermore, the intricate mechanisms by which controlled drug release takes place from silk-based carriers are discussed.

Bats are one of the groups of mammals with the highest number of associated Trypanosoma taxa. There are 50 Trypanosoma species and genotypes infecting more than 75 species of bats across five continents. However, in Mexico, the inventory of species of the genus Trypanosoma associated with bats is limited to only two species (Trypanosoma vespertilionis and Trypanosoma cruzi) even though 140 species of bats inhabit this country. Specifically, 91 bat species have been recorded in the state of Veracruz, but records of trypanosomatids associated with this mammalian group are absent. Due to the complex Trypanosoma-bat relationship, the high diversity of bat species in Veracruz, as well as the lack of records of trypanosomatids associated with bats for this state, the aim of this work was to analyze the diversity of species of the genus Trypanosoma and their presence from a bat community in the central area of the state of Veracruz, Mexico. During the period of January to August 2022 in the Tequecholapa Environmental Management Unit where bats were collected using mist nets and blood samples were obtained from their thumbs. We extracted genetic material and amplified a fragment of 800 bp of the 18S ribosomal gene of the genus Trypanosoma by conventional PCR. The positive amplicons were sequenced, and phylogenetic reconstruction was performed to identify the parasite species. A total of 285 bats (149♀, 136♂) belonging to 13 species from 10 genera and a single family (Phyllostomidae) were collected. Twenty-three specimens from six species tested positive for the presence of Trypanosoma dionisii, Trypanosoma sp. Neobat 4, and a potential novelty species provisionally named as Trypanosoma sp. Neobat 6. The results of the present work increase the number of species of the genus Trypanosoma infecting bats in Mexico and in the Neotropical region., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

Scaffolds grafting combined with local delivery of antibiotics at the injury site may promote bone regeneration along with prevention of infections. In this work, a processing strategy combining the 3D-printing of polysaccharide-based inks with supercritical (sc)CO 2 technology was employed to manufacture drug-loaded, nanostructured, and personalized-to-patient aerogels for the first time. Methylcellulose (MC) was employed as graft matrix endowed with nanohydroxyapatite (nHA) to confer bioactivity as required in bone tissue engineering (BTE). MC-nHA aerogels were obtained through the 3D-printing of hydrogel-based scaffolds followed by scCO 2 drying. Aerogels were loaded with vancomycin (VAN), an antibiotic employed in the management of bone infections. Textural properties and printing fidelity of scaffolds were studied as well as VAN release, long-term bioactivity, and pre-osteoblasts mineralization. In vitro cell studies and in vivo Artemia salina tests were carried out to evaluate the potential toxicity of the antibiotic-loaded aerogels. Aerogels efficacy in inhibiting bacterial growth was assessed by antimicrobial tests with Staphylococcus aureus. Textural stability of the aerogels after 7 months of storage was also evaluated. Obtained results showed that the scaffolds promoted the intended two-in-one effect (bone repair and infection management simultaneously) in a personalized way, regulating formulation design, drug dose, and porosity., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Upconversion nanoparticles (UCNPs) are under consideration for their use as bioimaging probes with enhanced optical performance for real time follow-up under non-invasive conditions. Photostable and core-shell NaYF 4 :Yb 3+ , Er 3+ -SiO 2 UCNPs obtained by a novel and simple co-precipitation method from lanthanide nitrates or oxides were herein synthesized for the first time. The sol-gel Stöber method followed by oven or supercritical gel drying was used to confer biocompatible surface properties to UCNPs by the formation of an ultrathin silica coating. Upconversion (UC) spectra were studied to evaluate the fluorescence of UCNPs upon red/near infrared (NIR) irradiation. ζ-potential measurements, TEM analyses, XRD patterns and long-term physicochemical stability were also assessed and confirmed that the UCNPs co-precipitation synthesis is a shape- and phase-controlling approach. The bio- and hemocompatibility of the UCNPs formulation with the highest fluorescence intensity was evaluated with murine fibroblasts and human blood, respectively, and provided excellent results that endorse the efficacy of the silica gel coating. The herein synthesized UCNPs can be regarded as efficient fluorescent probes for bioimaging purposes with the high luminescence, physicochemical stability and biocompatibility required for biomedical applications.

Bats represent the second order of mammals with the highest number of species worldwide with over 1,616 species, and almost 10% of them are recorded in Mexico. These mammals have a great diversity of ectoparasites, in particular soft ticks of the genus Ornithodoros. Desmodus rotundus is one of the bat species that has scarcely been studied in terms of tick species richness in Mexico, with three tick species reported in five of the 32 Mexican states. For this reason, the aim of the present work was to identify ticks associated with D. rotundus from Central Mexico. Fieldwork was undertaken in the municipality El Marqués, Ejido Atongo A, Querétaro, Mexico. Bats were captured using mist nets and were visually inspected for tick presence. The ectoparasites were identified morphologically and molecularly with the use of mitochondrial markers 16SrDNA and cytochrome oxidase subunit I (COI). A total of 30 D. rotundus (1 female, 29 males) were captured, from which 20 larvae identified as Ornithodoros yumatensis were recovered. Molecular analysis confirmed the presence of this species with identity values of 99-100% with sequences of this species from the southwestern US, and the Yucatán Peninsula, Mexico. This is the first report of ticks associated with bats for the state of Querétaro, providing the first sequences of the COI gene from Mexican populations of O. yumatensis and shows an increase in the distribution of this soft tick across Central Mexico., (© 2023. The Author(s), under exclusive licence to Springer Nature B.V.)

Polysaccharide aerogels have emerged as a highly promising technology in the field of oral drug delivery. These nanoporous, ultralight materials, derived from natural polysaccharides such as cellulose, starch, or chitin, have significant potential in colonic drug delivery due to their unique properties. The particular degradability of polysaccharide-based materials by the colonic microbiota makes them attractive to produce systems to load, protect, and release drugs in a controlled manner, with the capability to precisely target the colon. This would allow the local treatment of gastrointestinal pathologies such as colon cancer or inflammatory bowel diseases. Despite their great potential, these applications of polysaccharide aerogels have not been widely explored. This review aims to consolidate the available knowledge on the use of polysaccharides for oral drug delivery and their performance, the production methods for polysaccharide-based aerogels, the drug loading possibilities, and the capacity of these nanostructured systems to target colonic regions.

A newly produced silk fibroin (SF) aerogel particulate system using a supercritical carbon dioxide (scCO 2 )-assisted drying technology is herein proposed for biomedical applications. Different concentrations of silk fibroin (3%, 5%, and 7% ( w / v )) were explored to investigate the potential of this technology to produce size- and porosity-controlled particles. Laser diffraction, helium pycnometry, nitrogen adsorption-desorption analysis and Fourier Transform Infrared with Attenuated Total Reflectance (FTIR-ATR) spectroscopy were performed to characterize the physicochemical properties of the material. The enzymatic degradation profile of the SF aerogel particles was evaluated by immersion in protease XIV solution, and the biological properties by cell viability and cell proliferation assays. The obtained aerogel particles were mesoporous with high and concentration dependent specific surface area (203-326 m 2 /g). They displayed significant antioxidant activity and sustained degradation in the presence of protease XIV enzyme. The in vitro assessment using human dermal fibroblasts (HDF) confirm the particles' biocompatibility, as well as the enhancement in cell viability and proliferation.

An increasing number of aerogels as nanostructured highly porous materials are entering the market in every day products, with an attractive portfolio of properties for emerging applications ranging from health care and leisure to electronics, cosmetics, energy, agriculture, food and environmental. However, the novelty in properties and forms of aerogels makes the development of a legislative framework particularly challenging for ensuring the safe development and use of nano-enabled products. The presented safety regulatory Compendium intends to share knowledge with the international aerogels community, as well as end-users and stakeholders, on the regulatory and safe handling procedures, as best safety practices, to be followed during the production process, handling, transport and end-use of aerogel-based formulations to mitigate human and environmental risks considering lack of data availability for this purpose in general.

The identification of skeletal elements, the analysis of their developmental sequence, and the time of their appearance during larval development are essential to broaden the knowledge of each fish species and to recognize skeletal abnormalities that may affect further fish performance. Therefore, this study aimed to provide a general description of the development of the entire skeleton highlighting its variability in Cichlasoma dimerus. Larvae of C. dimersus were stained with alcian blue and alizarin red from hatching to 25 days posthatching. Skeletogenesis began with the endoskeletal disk and some cartilage structures from the caudal fin and the splachnocranium, while the first bony structure observed was the cleithrum. When larvae reached the free-swimming and exogenous feeding stage, mostly bones from the jaws, the branchial arches, and the opercle series evidenced some degree of ossification, suggesting that the ossification sequence of C. dimerus adjusts to physiological demands such as feeding and ventilation. The caudal region was the most variable regarding meristic counts and evidenced higher incidence of bone deformities. In conclusion, this work provides an overview of C. dimerus skeletogenesis and lays the groundwork for further studies on diverse topics, like developmental plasticity, rearing conditions, or phylogenetic relationships., (© 2023 Wiley Periodicals LLC.)

Chronic retinal diseases, such as age-related macular degeneration (AMD), are a major cause of global visual impairment. However, current treatment methods involving repetitive intravitreal injections pose financial and health burdens for patients. The development of controlled drug release systems, particularly for biological drugs, is still an unmet need in prolonging drug release within the vitreous chamber. To address this, green supercritical carbon dioxide (scCO 2 ) foaming technology was employed to manufacture porous poly(lactic-co-glycolic acid) (PLGA)-based intravitreal implants loaded with dexamethasone. The desired implant dimensions were achieved through 3D printing of customised moulds. By varying the depressurisation rates during the foaming process, implants with different porosities and dexamethasone release rates were successfully obtained. These implants demonstrated controlled drug release for up to four months, surpassing the performance of previously developed implants. In view of the positive results obtained, a pilot study was conducted using the monoclonal antibody bevacizumab to explore the feasibility of this technology for preparing intraocular implants loaded with biologic drug molecules. Overall, this study presents a greener and more sustainable alternative to conventional implant manufacturing techniques, particularly suited for drugs that are susceptible to degradation under harsh conditions., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

The production of aerogels for different applications has been widely known, but the use of polysaccharide-based aerogels for pharmaceutical applications, specifically as drug carriers for wound healing, is being recently explored. The main focus of this work is the production and characterization of drug-loaded aerogel capsules through prilling in tandem with supercritical extraction. In particular, drug-loaded particles were produced by a recently developed inverse gelation method through prilling in a coaxial configuration. Particles were loaded with ketoprofen lysinate, which was used as a model drug. The core-shell particles manufactured by prilling were subjected to a supercritical drying process with CO 2 that led to capsules formed by a wide hollow cavity and a tunable thin aerogel layer (40 μm) made of alginate, which presented good textural properties in terms of porosity (89.9% and 95.3%) and a surface area up to 417.0 m 2 /g. Such properties allowed the hollow aerogel particles to absorb a high amount of wound fluid moving very quickly (less than 30 s) into a conformable hydrogel in the wound cavity, prolonging drug release (till 72 h) due to the in situ formed hydrogel that acted as a barrier to drug diffusion.

This review provides a concise overview of up-to-date developments in the processing of neat poly(lactic acid) (PLA), improvement in its properties, and preparation of advanced materials using a green medium (CO 2 under elevated pressure). Pressurized CO 2 in the dense and supercritical state is a superior alternative medium to organic solvents, as it is easily available, fully recyclable, has easily tunable properties, and can be completely removed from the final material without post-processing steps. This review summarizes the state of the art on PLA drying, impregnation, foaming, and particle generation by the employment of dense and supercritical CO 2 for the development of new materials. An analysis of the effect of processing methods on the final material properties was focused on neat PLA and PLA with an addition of natural bioactive components. It was demonstrated that CO 2 -assisted processes enable the control of PLA properties, reduce operating times, and require less energy compared to conventional ones. The described environmentally friendly processing techniques and the versatility of PLA were employed for the preparation of foams, aerogels, scaffolds, microparticles, and nanoparticles, as well as bioactive materials. These PLA-based materials can find application in tissue engineering, drug delivery, active food packaging, compostable packaging, wastewater treatment, or thermal insulation, among others.

The genus Rickettsia encompasses several species grouped into two main clusters, Typhus and the Transitional groups. The latter group contains Rickettsia felis, an endosymbiont of several arthropods with an uncertain human pathogenicity and whose most efficient transmission mechanism described thus far is transovarial. The aim of this study was to evaluate whether this pathway exists using phylogenetic analysis and partial sequences of the 17kDa and gltA genes and comparing them with host phylogeny using the cytb region. This is the first study that evaluates the vertical transmission of R. felis. In general, both phylogenies of R. felis showed no polytomies, as suspected if this pathway was the only pathway occurring. When phylogenies of the invertebrates and the gltA of R. felis were compared for strong coevolutionary insight, intricate relationships were observed, suggesting that other transmission pathways must occur, such as horizontal transmission. Further studies are needed to determine which other transmission routes occur in hematophagous arthropods., (© 2022 Wiley-VCH GmbH.)

Aerogels are materials with unique properties, among which are low density and thermal conductivity. They are also known for their exquisite biocompatibility and biodegradability. All these features make them attractive for biomedical applications, such as their potential use in photothermal therapy (PTT). This technique is, yet, still associated with undesirable effects on surrounding tissues which emphasizes the need to minimize the exposure of healthy regions. One way to do so relies on the use of materials able to block the radiation and the heat generated. Aerogels might be potentially useful for this purpose by acting as insulators. Silica- and pectin-based aerogels are reported as the best inorganic and organic thermal insulators, respectively; thus, the aim of this work relies on assessing the possibility of using these materials as light and thermal insulators and delimiters for PTT. Silica- and pectin-based aerogels were prepared and fully characterized. The thermal protection efficacy of the aerogels when irradiated with a near-infrared laser was assessed using phantoms and ex vivo grafts. Lastly, safety was assessed in human volunteers. Both types presented good textural properties and safe profiles. Moreover, thermal activation unveils the better performance of silica-based aerogels, confirming the potential of this material for PTT.

Chronic wounds are physical traumas that significantly impair the quality of life of over 40 million patients worldwide. Aerogels are nanostructured dry porous materials that can act as carriers for the local delivery of bioactive compounds at the wound site. However, aerogels are usually obtained with low drug loading yields and poor particle size reproducibility and urges the implementation of novel and high-performance processing strategies. In this work, alginate aerogel particles loaded with vancomycin, an antibiotic used for the treatment of Staphylococcus aureus infections, were obtained through aerogel technology combined with gel inkjet printing and water-repellent surfaces. Alginate aerogel particles showed high porosity, large surface area, a well-defined spherical shape and a reproducible size (609 ± 37 μm). Aerogel formulation with vancomycin loadings of up to 33.01 ± 0.47 μg drug/mg of particle were obtained with sustained-release profiles from alginate aerogels for more than 7 days (PBS pH 7.4 medium). Overall, this novel green aerogel processing strategy allowed us to obtain nanostructured drug delivery systems with improved drug loading yields that can enhance the current antibacterial treatments for chronic wounds.

The outbreak of COVID-19 pandemic unveiled an unprecedented scarcity of personal protective equipment (PPE) available in sanitary premises and for the population worldwide. This situation fostered the development of new strategies to reuse PPE that would ensure sterility and, simultaneously, preserve the filtering properties of the materials. In addition, the reuse of PPEs by reprocessing could reduce the environmental impact of the massive single-use and disposal of these materials. Conventional sterilization techniques such as steam or dry heat, ethylene oxide, and gamma irradiation may alter the functional properties of the PPEs and/or leave toxic residues. Supercritical CO 2 (scCO 2 )-based sterilization is herein proposed as a safe, sustainable, and rapid sterilization method for contaminated face masks while preserving their performance. The functional (bacterial filtration efficiency, breathability, splash resistance, straps elasticity) properties of the processed FFP3 face masks were evaluated after 1 and 10 cycles of sterilization. Log-6 sterilization reduction levels were obtained for face masks contaminated with Bacillus pumilus endospores at mild operating conditions (CO 2 at 39 °C and 100 bar for 30 min) and with low contents of H 2 O 2 (150 ppm). Physicochemical properties of the FFP3 face masks remained unchanged after reprocessing and differences in efficacy were not observed neither in the filtration tests, following UNE-EN 14683, nor in the integrity of FFP3 filtration after the sterilization process. The herein presented method based on scCO 2 technology is the first reported protocol achieving the reprocessing of FFP3 masks up to 10 cycles while preserving their functional properties., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 The Authors. Published by Elsevier B.V. All rights reserved.)

The fabrication of bioactive three-dimensional (3D) hydrogel scaffolds from biocompatible materials with a complex inner structure (mesoporous and macroporous) and highly interconnected porosity is crucial for bone tissue engineering (BTE). 3D-printing technology combined with aerogel processing allows the fabrication of functional nanostructured scaffolds from polysaccharides for BTE with personalized geometry, porosity and composition. However, these aerogels are usually fragile, with fast biodegradation rates in biological aqueous fluids, and they lack the sterility required for clinical practice. In this work, reinforced alginate-hydroxyapatite (HA) aerogel scaffolds for BTE applications were obtained by a dual strategy that combines extrusion-based 3D-printing and supercritical CO 2 gel drying with an extra crosslinking step. Gel ageing in CaCl 2 solutions and glutaraldehyde (GA) chemical crosslinking of aerogels were performed as intermediate and post-processing reinforcement strategies to achieve highly crosslinked aerogel scaffolds. Nitrogen adsorption-desorption (BET) and SEM analyses were performed to assess the textural parameters of the resulting alginate-HA aerogel scaffolds. The biological evaluation of the aerogel scaffolds was performed regarding cell viability, hemolytic activity and bioactivity for BTE. The impact of scCO 2 -based post-sterilization treatment on scaffold properties was also assessed. The obtained aerogels were dual porous, bio- and hemocompatible, as well as endowed with high bioactivity that is dependent on the HA content. This work is a step forward towards the optimization of the physicochemical performance of advanced biomaterials and their sterilization.

The access of biodegradable scaffolds to the clinical arena is constrained by the absence of a suitable sterilization technique for the processing of advanced polymeric materials. Sterilization with supercritical CO 2 (scCO 2 ) may circumvent some technological limitations (e.g., low temperature, no chemical residues on the material), although scCO 2 can plasticize the polymer depending on the processing conditions used. In this latter case, the integration of the manufacturing and sterilization processes is of particular interest to obtain sterile and customized scaffolds in a single step. In this work, scCO 2 was exploited as a concomitantly foaming and sterilizing agent for the first time, developing a one-step process for the production of vancomycin-loaded poly(ε-caprolactone) (PCL) bone scaffolds. The effect of the CO 2 contact time on the sterility levels of the procedure was investigated, and the sterilization efficiency was evaluated against dry spores (Bacillus stearothermophilus, Bacillus pumilus and Bacillus atrophaeus). Vancomycin-loaded PCL scaffolds had relevant sustained release profiles for the prophylaxis of infections at the grafted area, even those caused by methicillin-resistant Staphylococcus aureus (MRSA). The biological performance of the scaffolds was evaluated in vitro regarding human mesenchymal stem cells (hMSCs) attachment and growth. Finally, the biocompatibility and angiogenic response of the manufactured sterile scaffolds was assessed in ovo through chick chorioallantoic membrane (CAM) assays., (Copyright © 2021 The Authors. Published by Elsevier B.V. All rights reserved.)

CO 2 levels in the atmosphere are increasing exponentially. The current climate change effects motivate an urgent need for new and sustainable materials to capture CO 2 . Porous materials are particularly interesting for processes that take place near atmospheric pressure. However, materials design should not only consider the morphology, but also the chemical identity of the CO 2 sorbent to enhance the affinity towards CO 2 . Poly(ionic liquid)s (PILs) can enhance CO 2 sorption capacity, but tailoring the porosity is still a challenge. Aerogel's properties grant production strategies that ensure a porosity control. In this work, we joined both worlds, PILs and aerogels, to produce a sustainable CO 2 sorbent. PIL-chitosan aerogels ( AEROPILs ) in the form of beads were successfully obtained with high porosity (94.6-97.0%) and surface areas (270-744 m 2 /g). AEROPILs were applied for the first time as CO 2 sorbents. The combination of PILs with chitosan aerogels generally increased the CO 2 sorption capability of these materials, being the maximum CO 2 capture capacity obtained (0.70 mmol g -1 , at 25 °C and 1 bar) for the CHT:P[DADMA]Cl 30% AEROPIL .

Tropical gar (Atractosteus tropicus) thrives in aquatic habitats with high levels of total nitrogen (TAN) and unionized ammonia (NH 3 ). However, the tolerance of TAN and NH 3 , the excretion mechanisms involved, and the effects of these chemicals on routine metabolism are still unknown. Therefore, our objectives were to assess the acute toxicity of TAN and NH 3 in A. tropicus juveniles after a 96-h exposure (LC50-96 h) to NH 4 Cl and after chronic exposure to two concentrations (15% and 30% of LC50-96 h TAN) for 12 days, as well as to evaluate the transcriptional effects associated with Rhesus proteins (rhag, rhbg, rhcg) and ion transporters (NHE, NKA, NKCC, and CFTR) in gills and skin; and to determine the effects of TAN and NH3 on routine metabolism through oxygen consumption (μM g -1  h -1 ) and gill ventilation frequency (beats min -1 ). LC50-96 h values were 100.20 ± 11.21 mg/L for TAN and 3.756 ± 0.259 mg/L for NH 3 . The genes encoding Rhesus proteins and ion transporters in gills and skin showed a differential expression according to TAN concentrations and exposure time. Oxygen consumption on day 12 showed significant differences between treatments with 15% and 30% TAN. Gill ventilation frequency on day 12 was higher in fish exposed to 30% TAN. In conclusion, A. tropicus juveniles are highly tolerant to TAN, showing upregulation of the genes involved in TAN excretion through gills and skin, which affects routine oxygen consumption and energetic cost. These findings are relevant for understanding adaptations in the physiological response of a tropical ancestral air-breathing fish., (Copyright © 2021 Elsevier Inc. All rights reserved.)

3D-printing technology allows the automated and reproducible manufacturing of functional structures for tissue engineering with customized geometries and compositions by depositing materials layer-by-layer with high precision. For these purposes, the production of bioactive gel-based 3D-scaffolds made of biocompatible materials with well-defined internal structure comprising a dual (mesoporous and macroporous) and highly interconnected porosity is essential. In this work, aerogel scaffolds for bone regeneration purposes were obtained by an innovative strategy that combines the 3D-printing of alginate-hydroxyapatite (HA) hydrogels and the supercritical CO 2 drying of the gels. BET and SEM analyses were performed to assess the textural parameters of the obtained aerogel scaffolds and the dimensional accuracy to the original computer-aided design (CAD) design was also evaluated. The biological characterization of the aerogel scaffolds was also carried out regarding cell viability, adhesion and migration capacity. The obtained alginate-HA aerogel scaffolds were highly porous, biocompatible, with high fidelity to the CAD-pattern and also allowed the attachment and proliferation of mesenchymal stem cells (MSCs). An enhancement of the fibroblast migration toward the damaged area was observed in the presence of the aerogel formulations tested, which is positive in terms of bone regeneration., (Copyright © 2021 The Authors. Published by Elsevier B.V. All rights reserved.)

Mexico is a highly diverse country where ticks and tick-borne diseases (TBD) directly impact the health of humans and domestic and wild animals. Ticks of the genera Rhipicephalus spp., Amblyomma spp., and Ixodes spp. represent the most important species in terms of host parasitism and geographical distribution in the country, although information on other genera is either limited or null. In addition, information regarding the influence of global warming on the increase in tick populations is scarce or nonexistent, despite climate conditions being the most important factors that determine tick distribution. In order to aid in the management of ticks and the risks of TBD in humans and domestic animals in Mexico, an analysis was conducted of the gaps in information on ticks with the purpose of updating the available knowledge of these ectoparasites and adapting the existing diagnostic tools for potential distribution analysis of TBD in wildlife. These tools will help to determine the epidemiological role of wildlife in the human-domestic animal interface in anthropized environments in Mexico.

Long-chain (≥C 20 ) polyunsaturated fatty acids (LC-PUFA), including eicosapentaenoic acid (EPA, 20:5n-3), arachidonic acid (ARA, 20:4n-6) and docosahexaenoic acid (DHA, 22:6n-3), are essential in multiple physiological processes, especially during early development of vertebrates. LC-PUFA biosynthesis is achieved by two key families of enzymes, fatty acyl desaturases (Fads) and elongation of very long-chain fatty acid (Elovl). The present study determined the expression patterns of genes encoding desaturases (fads1 and fads2) and elongases (elovl2 and elovl5) involved in the LC-PUFA biosynthesis during early life-stages of the tropical gar Atractosteus tropicus. We further analyzed the fatty acid profiles during early development of A. tropicus to evaluate the impact of Fads and Elovl enzymatic activities. Specific oligonucleotides were designed from A. tropicus transcriptome to perform qPCR (quantitative polymerase chain reaction) on embryonic and larval stages, along with several organs (intestine, white muscle, brain, liver, heart, mesenteric adipose, kidney, gill, swim bladder, stomach, and spleen) collected from juvenile specimens. Fatty acid content of feeds and embryonic and larval stages were analyzed. Results show that fads1, fads2, elovl2 and elovl5 expression was detected from embryonic stages with expression peaks from day 15 post hatching, which could be related to transcriptional and dietary factors. Moreover, fads1, fads2 and elovl2 showed a higher expression in intestine, while elovl5 showed a higher expression in liver, suggesting that the tropical gar activates its LC-PUFA biosynthetic machinery to produce ARA, EPA and DHA to satisfy physiological demands at crucial developmental milestones during early development., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Sterilization is a quite challenging step in the development of novel polymeric scaffolds for regenerative medicine since conventional sterilization techniques may significantly alter their morphological and physicochemical properties. Supercritical (sc) sterilization, i.e. the use of scCO 2 as a sterilizing agent, emerges as a promising sterilization method due to the mild operational conditions and excellent penetration capability. In this work, a scCO 2 protocol was implemented for the one-pot preparation and sterilization of poly(ε-caprolactone) (PCL)/poly(lactic-co-glycolic acid) (PLGA) scaffolds. The sterilization conditions were established after screening against both Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli, Pseudomonas aeruginosa) vegetative bacteria and spores of Bacillus stearothermophilus, Bacillus pumilus and Bacillus atrophaeus. The transition from the sterilization conditions (140 bar, 39 °C) to the compressed foaming (60 bar, 26 °C) was performed through controlled depressurization (3.2 bar/min) and CO 2 liquid flow. Controlled depressurization/pressurization cycles were subsequently applied. Using this scCO 2 technology toolbox, sterile scaffolds of well-controlled pore architecture were obtained. This sterilization procedure successfully achieved not only SAL-6 against well-known resistant bacteria endospores but also improved the scaffold morphologies compared to standard gamma radiation sterilization procedures., (Copyright © 2021 The Authors. Published by Elsevier B.V. All rights reserved.)

Bifidobacterial proteins have been widely studied to elucidate the metabolic mechanisms of diet adaptation and survival of Bifidobacteria, among others. The use of heterologous expression systems to obtain proteins in sufficient quantities to be characterized has been essential in these studies. L. lactis and the same Bifidobacterium as expression systems highlight ways to corroborate some of the functions attributed to these proteins. The most studied proteins are enzymes related to carbohydrate metabolism, particularly glycosidases, due to their potential application in the synthesis of neoglycoconjugates, prebiotic neooligosaccharides, and active metabolites as well as their high specificity and efficiency in processing glycoconjugates. In this review, we classified the recombinant bifidobacterial proteins reported to date whose characterization has demonstrated their usefulness or their ability to produce a product of commercial interest for the food industry, biomedicine, process innovation and glycobiology. Future directions for their study are also discussed., Supplementary Information: The online version contains supplementary material available at 10.1007/s10068-021-00957-1., Competing Interests: Conflict of interestThe authors declare that there is no conflict of interest., (© The Korean Society of Food Science and Technology 2021.)

Larval attachment organs (LAOs) are unicellular or multicellular organs that allow larvae to adhere to a substrate before yolk-sac absorption and the free-swimming stage. This study documents the LAO of tropical gar, Atractosteus tropicus, using a combination of scanning electron microscopy and light microscopy. It is shown that the LAO of A. tropicus is a super-organ surrounded by a wall and containing at its centre many smaller multicellular organ units, each comprised of attachment and support cells. Attachment cells are secretory and house large vacuoles filled with a glycoprotein. At hatching, the super-organ is well developed and occupies almost the entire anteroventral surface of the head. During subsequent development, the smaller individual units begin to regress, until at 6 days post-hatching the super-organ and its individual units are no longer visible., (© 2021 Fisheries Society of the British Isles.)

To adopt prevention strategies in gastric cancer, it is imperative to develop robust biomarkers with acceptable costs and feasibility in clinical practice to stratified populations according to risk scores. With this aim, we applied an unbiased genome-wide CpG methylation approach to a discovery cohort composed of gastric cancer ( n = 24), and non-malignant precursor lesions ( n = 64). Then, candidate-methylation approaches were performed in a validation cohort of precursor lesions obtained from an observational longitudinal study ( n = 264), with a 12-year follow-up to identify repression or progression cases. H. pylori stratification and histology were considered to determine their influence on the methylation dynamics. As a result, we ascertained that intestinal metaplasia partially recapitulates patterns of aberrant methylation of intestinal type of gastric cancer, independently of the H. pylori status. Two epigenetically regulated genes in cancer, RPRM and ZNF793 , consistently showed increased methylation in intestinal metaplasia with respect to earlier precursor lesions. In summary, our result supports the need to investigate the practical utilities of the quantification of DNA methylation in candidate genes as a marker for disease progression. In addition, the H. pylori -dependent methylation in intestinal metaplasia suggests that pharmacological treatments aimed at H. pylori eradication in the late stages of precursor lesions do not prevent epigenome reprogramming toward a cancer signature.

Pulmonary drug delivery has recognized benefits for both local and systemic treatments. Dry powder inhalers (DPIs) are convenient, portable and environmentally friendly devices, becoming an optimal choice for patients. The tailoring of novel formulations for DPIs, namely in the form of porous particles, is stimulating in the pharmaceutical research area to improve delivery efficiency. Suitable powder technological approaches are being sought to design such formulations. Namely, aerogel powders are nanostructured porous particles with particularly attractive properties (large surface area, excellent aerodynamic properties and high fluid uptake capacity) for these purposes. In this review, the most recent development on powder technologies used for the processing of particulate porous carriers are described via updated examples and critically discussed. A special focus will be devoted to the most recent advances and uses of aerogel technology to obtain porous particles with advanced performance in pulmonary delivery., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Duong, López-Iglesias, Szewczyk, Stachewicz, Barros, Alvarez-Lorenzo, Alnaief and García-González.)

Aerogels are the lightest processed solid materials on Earth and with the largest empty volume fraction in their structure. Composition versatility, modularity, and feasibility of industrial scale manufacturing are behind the fast emergence of aerogels in the drug delivery field. Compared to other 3D materials, the high porosity (interconnected mesopores) and high specific surface area of aerogels may allow faster loading of small-molecule drugs, less constrained access to inner regions of the matrix, and more efficient interactions of the biological milieu with the polymer matrix. Processing in supercritical CO 2 medium for both aerogel production (drying) and drug loading (impregnation) has remarkable advantages such as absence of an oxidizing environment, clean manufacture, and easiness for the scale-up under good manufacturing practices. The aerogel solid skeleton dictates the chemical affinity to the different drugs, which in turn determines the loading efficiency and the release pattern. Aerogels can be used to increase the solubility of BCS Class II and IV drugs because the drug can be deposited in amorphous state onto the large surface area of the skeleton, which facilitates a rapid contact with the body fluids, dissolution, and release. Conversely, tuning the aerogel structure by functionalization with drug-binding moieties or stimuli-responsive components, application of coatings and incorporation of drug-loaded aerogels into other matrices may enable site-specific, stimuli-responsive, or prolonged drug release. The present review deals with last decade advances in aerogels for drug delivery. An special focus is paid first on the loading efficiency of active ingredients and release kinetics under biorelevant conditions. Subsequent sections deal with aerogels intended to address specific therapeutic demands. In addition to oral delivery, the physical properties of the aerogels appear to be very advantageous for mucosal administration routes, such as pulmonary, nasal, or transdermal. A specific section devoted to recent achievements in gene therapy and theranostics is also included. In the last section, scale up strategies and life cycle assessment are comprehensively addressed., (Copyright © 2021 The Author(s). Published by Elsevier B.V. All rights reserved.)

Background: Evidence from the scientific literature shows a significant variation in greenhouse gas (GHG) emissions from the diet, according to the type of food consumed. We aim to analyze the relationship between the daily dietary GHG emissions according to red meat, fruit and vegetables consumption and their relationship with risk of total mortality, and incident risk of chronic diseases., Methods: We examined data on the EPIC-Spain prospective study, with a sample of 40 621 participants. Dietary GHG emission values were calculated for 57 food items of the EPIC study using mean emission data from a systematic review of 369 published studies., Results: Dietary GHG emissions (kgCO2eq/day), per 2000 kcal, were 4.7 times higher in those with high red-meat consumption (>140 g/day) than those with low consumption (<70 g/day). The average dietary GHG emissions were similar in males and females, but it was significantly higher in youngest people and in those individuals with lower educational level, as well as for northern EPIC centers of Spain. We found a significant association with the risk of mortality comparing the third vs. the first tertile of dietary GHG emissions [hazard ratio (HR) 1.095; 95% confidence interval (CI) 1.007-1.19; trend test 0.037]. Risk of coronary heart disease (HR 1.26; 95% CI 1.08-1.48; trend test 0.003) and risk of type 2 diabetes (HR 1.24; 95% CI 1.11-1.38; trend test 0.002) showed significant association as well., Conclusions: Decreasing red-meat consumption would lead to reduce GHG emissions from diet and would reduce risk of mortality, coronary heart disease and type 2 diabetes., (© The Author(s) 2020. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.)

Biopolymers and biocomposites have emerged as promising pathways to develop novel materials and substrates for biomedical applications [...].

Demand of scaffolds for hard tissue repair increases due to a higher incidence of fractures related to accidents and bone-diseases that are linked to the ageing of the population. Namely, scaffolds loaded with bioactive agents can facilitate the bone repair by favoring the bone integration and avoiding post-grafting complications. Supercritical (sc-)foaming technology emerges as a unique solvent-free approach for the processing of drug-loadenu7d scaffolds at high incorporation yields. In this work, medicated poly(ε-caprolactone) (PCL) scaffolds were prepared by sc-foaming coupled with a leaching process to overcome problems of pore size tuning of the sc-foaming technique. The removal of the solid porogen (BA, ammonium bicarbonate) was carried out by a thermal leaching taking place at 37 °C and in the absence of solvents for the first time. Macroporous scaffolds with dual porosity (50-100 µm and 200-400 µm ranges) were obtained and with a porous structure directly dependent on the porogen content used. The processing of ketoprofen-loaded scaffolds using BA porogen resulted in drug loading yields close to 100% and influenced its release profile from the PCL matrix to a relevant clinical scenario. A novel solvent-free strategy has been set to integrate the incorporation of solid porogens in the sc-foaming of medicated scaffolds.

Starch aerogels are attractive materials for biomedical applications because of their low density and high open porosity coupled with high surface areas. However, the lack of macropores in conventionally manufactured polysaccharide aerogels is a limitation to their use as scaffolds for regenerative medicine. Moreover, the stability under storage of polysaccharide aerogels is critical for biomedical purposes and scarcely studied so far. In this work, the induction of a new macropore population (1-2 μm) well integrated into the starch aerogel backbone was successfully achieved by the incorporation of zein as a porogen. The obtained dual-porous aerogels were evaluated in terms of composition as well as morphological, textural, and mechanical properties. Stability of aerogels upon storage mimicking the zone II (25 °C, 65% relative humidity) according to the International Council for Harmonization guideline of climatic conditions was checked after 1 and 3 months from morphological, physicochemical, and mechanical perspectives. Zein incorporation induced remarkable changes in the mechanical performance of the end aerogel products and showed a preventive effect on the morphological changes during the storage period.

The Holostei group occupies a critical phylogenetic position as the sister group of the Teleostei. However, little is known about holostean pituitary anatomy or brain distribution of important reproductive neuropeptides, such as the gonadotropin-inhibitory hormone (GnIH). Thus, the present study set out to characterize the structure of the pituitary and to localize GnIH-immunoreactive cells in the brain of Atractosteus tropicus from the viewpoint of comparative neuroanatomy. Juveniles of both sexes were processed for general histology and immunohistochemistry. Based on the differences in cell organization, morphology, and staining properties, the neurohypophysis and three regions in the adenohypophysis were identified: the rostral and proximal pars distalis (PPD) and the pars intermedia. This last region was found to be innervated by the neurohypophysis. This organization, together with the presence of a saccus vasculosus, resembles the general teleost pituitary organization. A vast number of blood vessels were also recognized between the infundibulum floor of the hypothalamus and the PPD, evidencing the characteristic presence of a median eminence and a portal system. However, this well-developed pituitary portal system resembles that of tetrapods. As regards the immunohistochemical localization of GnIH, we found four GnIH-immunoreactive (GnIH-ir) populations in three hypothalamic nuclei (suprachiasmatic, retrotuberal, and tuberal nuclei) and one in the diencephalon (prethalamic nucleus), as well as a few scattered neurons throughout the olfactory bulbs, the telencephalon, and the intersection between them. GnIH-ir fibers showed a widespread distribution over almost all brain regions, suggesting that GnIH function is not restricted to reproduction only. In conclusion, the present study describes, for the first time, the pituitary of A. tropicus and the neuroanatomical localization of GnIH in a holostean fish that exhibits a similar distribution pattern to that of teleosts and other vertebrates, suggesting a high degree of phylogenetic conservation of this system., (Copyright © 2020 Elsevier Inc. All rights reserved.)

Solid lipid microparticles (SLMPs) are attractive carriers as delivery systems as they are stable, easy to manufacture and can provide controlled release of bioactive agents and increase their efficacy and/or safety. Particles from Gas-Saturated Solutions (PGSS ® ) technique is a solvent-free technology to produce SLMPs, which involves the use of supercritical CO 2 (scCO 2 ) at mild pressures and temperatures for the melting of lipids and atomization into particles. The determination of the key processing variables is crucial in PGSS ® technique to obtain reliable and reproducible microparticles, therefore the modelling of SLMPs production process and variables control are of great interest to obtain quality therapeutic systems. In this work, the melting point depression of a commercial lipid (glyceryl monostearate, GMS) under compressed CO 2 was studied using view cell experiments. Based on an unconstrained D-optimal design for three variables (nozzle diameter, temperature and pressure), SLMPs were produced using the PGSS ® technique. The yield of production was registered and the particles characterized in terms of particle size distribution. Variable modeling was carried out using artificial neural networks and fuzzy logic integrated into neurofuzzy software. Modeling results highlight the main effect of temperature to tune the mean diameter SLMPs, whereas the pressure-nozzle diameter interaction is the main responsible in the SLMPs size distribution and in the PGSS ® production yield.

The delivery of bioactive agents using active wound dressings for the management of pain and infections offers improved performances in the treatment of wound complications. In this work, solid lipid microparticles (SLMPs) loaded with lidocaine hydrochloride (LID) were processed and the formulation was evaluated regarding its ability to deliver the drug at the wound site and through the skin barrier. The SLMPs of glyceryl monostearate (GMS) were prepared with different LID contents (0, 1, 2, 4, and 10 wt.%) using the solvent-free and one-step PGSS (Particles from Gas-Saturated Solutions) technique. PGSS exploits the use of supercritical CO 2 (scCO 2 ) as a plasticizer for lipids and as pressurizing agent for the atomization of particles. The SLMPs were characterized in terms of shape, size, and morphology (SEM), physicochemical properties (ATR-IR, XRD), and drug content and release behavior. An in vitro test for the evaluation of the influence of the wound environment on the LID release rate from SLMPs was studied using different bioengineered human skin substitutes obtained by 3D-bioprinting. Finally, the antimicrobial activity of the SLMPs was evaluated against three relevant bacteria in wound infections ( Escherichia coli , Staphylococcus aureus, and Pseudomonas aeruginosa ). SLMPs processed with 10 wt.% of LID showed a remarkable performance to provide effective doses for pain relief and preventive infection effects.

In this work, the impact of pepper ( Capsicum spp.) fruits morphology on their composition for health-promoting compounds was investigated. For that purpose, pepper accessions from Ecuador, one of the hotspots in Capsicum 's origin, were analyzed for ascorbic acid, polyphenols, capsaicinoids, and prevention of cholesterol oxidation. Plant and fruit phenomics were assessed with conventional descriptors and Tomato Analyzer digital traits. Significant differences among accessions and species revealed a large diversity within the collection. The Capsicum frutescens group displayed the highest levels of capsaicinoids, whereas the polyphenols shortly varied among the five domesticated species. Capsicum pubescens exhibited the lowest content of ascorbic acid. The conventional descriptors describing the magnitude of plants and fruits, as well as digital attributes under the categories of size, shape index, and latitudinal section, mostly explained the variance among Capsicum groups. Correlation test revealed that phytochemical components were negatively correlated with the morphometric fruit attributes, suggesting that huge fruits contained lower amounts of nutraceutical compounds. Multivariate analysis showed that parameters related to fruit size, shape, and nutraceutical composition primarily contribute to the arrangement of pepper accessions. Such results suggested that those traits have been subjected to higher selection pressures imposed by humans.

Polysaccharide-based hydrogel particles (PbHPs) are very promising carriers aiming to control and target the release of drugs with different physico-chemical properties. Such delivery systems can offer benefits through the proper encapsulation of many drugs (non-steroidal and steroidal anti-inflammatory drugs, antibiotics, etc) ensuring their proper release and targeting. This review discusses the different phases involved in the production of PbHPs in pharmaceutical technology, such as droplet formation (SOL phase), sol-gel transition of the droplets (GEL phase) and drying, as well as the different methods available for droplet production with a special focus on prilling technique. In addition, an overview of the various droplet gelation methods with particular emphasis on ionic cross-linking of several polysaccharides enabling the formation of particles with inner highly porous network or nanofibrillar structure is given. Moreover, a detailed survey of the different inner texture, in xerogels, cryogels or aerogels, each with specific arrangement and properties, which can be obtained with different drying methods, is presented. Various case studies are reported to highlight the most appropriate application of such systems in pharmaceutical field. We also describe the challenges to be faced for the breakthrough towards clinic studies and, finally, the market, focusing on the useful approach of safety-by-design (SbD)., Competing Interests: The authors declare no conflict of interest.

Ticks are vectors of a large number of pathogens of medical and veterinary importance, and in recent years, they have participated in the rise of multiple infectious outbreaks around the world. Studies have proposed that temperature and precipitation are the main variables that limit the geographical distribution of ticks. The analysis of environmental constraints with ecological niche modeling (ENM) techniques can improve our ability to identify suitable areas for emergence events. Algorithms used in this study showed different distributional patterns for each tick genera; the environmental suitability for Amblyomma includes warm and humid localities below 1000 m above the sea level, while Ixodes is mainly associated with ecosystems with high vegetation cover. Dermacentor and Rhipicephalus genus presented wider distribution patterns; the first includes species that are well adapted to resist desiccation, whereas the latter includes generalist species that are mostly associated with domestic hosts in Mexico. Ecological niche models have proven to be useful in estimating the geographic distribution of many taxa of ticks. Despite our limited knowledge of tick's diversity, ENM can improve our understanding of the dynamics of vector-borne diseases and can assist public health decision-making processes., Competing Interests: The authors declare no conflict of interest. The funders had no role in the design of the study; in the collection, analyses, or interpretation of data; in the writing of the manuscript; or in the decision to publish the results.

The regenerative medicine field is seeking novel strategies for the production of synthetic scaffolds that are able to promote the in vivo regeneration of a fully functional tissue. The choices of the scaffold formulation and the manufacturing method are crucial to determine the rate of success of the graft for the intended tissue regeneration process. On one hand, the incorporation of bioactive compounds such as growth factors and drugs in the scaffolds can efficiently guide and promote the spreading, differentiation, growth, and proliferation of cells as well as alleviate post-surgical complications such as foreign body responses and infections. On the other hand, the manufacturing method will determine the feasible morphological properties of the scaffolds and, in certain cases, it can compromise their biocompatibility. In the case of medicated scaffolds, the manufacturing method has also a key effect in the incorporation yield and retained activity of the loaded bioactive agents. In this work, solvent-free methods for scaffolds production, i.e., technological approaches leading to the processing of the porous material with no use of solvents, are presented as advantageous solutions for the processing of medicated scaffolds in terms of efficiency and versatility. The principles of these solvent-free technologies (melt molding, 3D printing by fused deposition modeling, sintering of solid microspheres, gas foaming, and compressed CO 2 and supercritical CO 2 -assisted foaming), a critical discussion of advantages and limitations, as well as selected examples for regenerative medicine purposes are herein presented.

The increasing complexity in morphology and composition of modern biomedical materials (e.g., soft and hard biological tissues, synthetic and natural-based scaffolds, technical textiles) and the high sensitivity to the processing environment requires the development of innovative but benign technologies for processing and treatment. This scenario is particularly applicable where current conventional techniques (steam/dry heat, ethylene oxide, and gamma irradiation) may not be able to preserve the functionality and integrity of the treated material. Sterilization using supercritical carbon dioxide emerges as a green and sustainable technology able to reach the sterility levels required by regulation without altering the original properties of even highly sensitive materials. In this review article, an updated survey of experimental protocols based on supercritical sterilization and of the efficacy results sorted by microbial strains and treated materials was carried out. The application of the supercritical sterilization process in materials used for biomedical, pharmaceutical, and food applications is assessed. The opportunity of supercritical sterilization of not only replace the above mentioned conventional techniques, but also of reach unmet needs for sterilization in highly sensitive materials (e.g., single-use medical devices, the next-generation biomaterials, and medical devices and graft tissues) is herein unveiled., (© 2019 Wiley Periodicals, Inc.)

Biopolymer-based aerogels can be obtained by supercritical drying of wet gels and endowed with outstanding properties for biomedical applications. Namely, polysaccharide-based aerogels in the form of microparticles are of special interest for wound treatment and can also be loaded with bioactive agents to improve the healing process. However, the production of the precursor gel may be limited by the viscosity of the polysaccharide initial solution. The jet cutting technique is regarded as a suitable processing technique to overcome this problem. In this work, the technological combination of jet cutting and supercritical drying of gels was assessed to produce chitosan aerogel microparticles loaded with vancomycin HCl (antimicrobial agent) for wound healing purposes. The resulting aerogel formulation was evaluated in terms of morphology, textural properties, drug loading, and release profile. Aerogels were also tested for wound application in terms of exudate sorption capacity, antimicrobial activity, hemocompatibility, and cytocompatibility. Overall, the microparticles had excellent textural properties, absorbed high amounts of exudate, and controlled the release of vancomycin HCl, providing sustained antimicrobial activity., Competing Interests: The authors declare no conflict of interest.

Four epidemiologic studies have assessed the association between nut intake and pancreatic cancer risk with contradictory results. The present study aims to investigate the relation between nut intake (including seeds) and pancreatic ductal adenocarcinoma (PDAC) risk in the European Prospective Investigation into Cancer and Nutrition (EPIC) study. Cox proportional hazards models were used to estimate hazards ratio (HR) and 95% confidence intervals (95% CI) for nut intake and PDAC risk. Information on intake of nuts was obtained from the EPIC country-specific dietary questionnaires. After a mean follow-up of 14 years, 476,160 participants were eligible for the present study and included 1,283 PDAC cases. No association was observed between consumption of nuts and PDAC risk (highest intake vs nonconsumers: HR, 0.89; 95% CI, 0.72-1.10; p-trend = 0.70). Furthermore, no evidence for effect-measure modification was observed when different subgroups were analyzed. Overall, in EPIC, the highest intake of nuts was not statistically significantly associated with PDAC risk., (© 2019 UICC.)