Search

One of the most important forces generated during gait is the vertical ground reaction force (vGRF). This force can be measured using force plates, but these can limit the scope of gait analysis. This paper presents a method to estimate the vGRF using inertial measurement units (IMU) and machine learning techniques. Four wearable IMUs were used to obtain flexion/extension angles of the hip, knee, and ankle joints, and an IMU placed over the C7 vertebra to measure vertical acceleration. We trained and compared the performance of two machine learning algorithms: feedforward neural networks (FNN) and random forest (RF). We investigated the importance of the inputs introduced into the models and analyzed in detail the contribution of lower limb kinematics and vertical acceleration to model performance. The results suggest that the inclusion of vertical acceleration increases the root mean square error in the FNN, while the RF appears to decrease it. We also analyzed the ability of the models to construct the force signal, with particular emphasis on the magnitude and timing of the vGRF peaks. Using the proposed method, we concluded that FNN and RF models can estimate the vGRF with high accuracy., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Martínez-Pascual, Catalán, Blanco-Ivorra, Sanchís, Arán-Ais and García-Aracil.)

Background: The aging of the population and the progressive increase of life expectancy in developed countries is leading to a high incidence of age-related cerebrovascular diseases, which affect people's motor and cognitive capabilities and might result in the loss of arm and hand functions. Such conditions have a detrimental impact on people's quality of life. Assistive robots have been developed to help people with motor or cognitive disabilities to perform activities of daily living (ADLs) independently. Most of the robotic systems for assisting on ADLs proposed in the state of the art are mainly external manipulators and exoskeletal devices. The main objective of this study is to compare the performance of an hybrid EEG/EOG interface to perform ADLs when the user is controlling an exoskeleton rather than using an external manipulator., Methods: Ten impaired participants (5 males and 5 females, mean age 52 ± 16 years) were instructed to use both systems to perform a drinking task and a pouring task comprising multiple subtasks. For each device, two modes of operation were studied: synchronous mode (the user received a visual cue indicating the sub-tasks to be performed at each time) and asynchronous mode (the user started and finished each of the sub-tasks independently). Fluent control was assumed when the time for successful initializations ranged below 3 s and a reliable control in case it remained below 5 s. NASA-TLX questionnaire was used to evaluate the task workload. For the trials involving the use of the exoskeleton, a custom Likert-Scale questionnaire was used to evaluate the user's experience in terms of perceived comfort, safety, and reliability., Results: All participants were able to control both systems fluently and reliably. However, results suggest better performances of the exoskeleton over the external manipulator (75% successful initializations remain below 3 s in case of the exoskeleton and bellow 5s in case of the external manipulator)., Conclusions: Although the results of our study in terms of fluency and reliability of EEG control suggest better performances of the exoskeleton over the external manipulator, such results cannot be considered conclusive, due to the heterogeneity of the population under test and the relatively limited number of participants., (© 2023. The Author(s).)

Background: The aging of the population and the progressive increase in life expectancy in developed countries is leading to a high incidence of cerebrovascular diseases. Several studies have demonstrated that robot-assisted rehabilitation therapies combined with serious games can improve rehabilitation outcomes. Social interaction in the form of multiplayer games has been highlighted as a potential element to increase patient's motivation and exercise intensity, which professionals have described as one of the determining factors in maximizing rehabilitation outcomes. Despite this, it has not been widely studied. Physiological measures have been proven as an objective tool to evaluate patients' experience in robot-assisted rehabilitation environments. However, they have not been used to evaluate patients' experience in multiplayer robot-assisted rehabilitation therapies. The main objective of this study is to analyze whether the interpersonal interaction inherent in a competitive game mode affects the patients' physiological responses in robot-assisted rehabilitation environments., Methods: A total of 14 patients participated in this study. The results of a competitive game mode were compared with a single-player game mode with different difficulty levels. Exercise intensity and performance were measured through parameters extracted from the game and the information provided by the robotic rehabilitation platforms. The physiological response of patients in each game mode was measured by the heart rate (HR) and the galvanic skin response (GSR). Patients were asked to fill out the IMI and the overall experience questionnaire., Results: The exercise intensity results show that high-difficulty single-player game mode is similar in terms of intensity level to a competitive game mode, based on velocity values, reaction time and questionnaire results. However, the results of the physiological responses of the patients measured by GSR and HR are lower in the case of the competitive mode compared to the high-difficulty single-player game mode, obtaining results similar to those obtained in the low-difficulty single-player game mode., Conclusions: Patients find the competitive game mode the most fun, which is also the mode they report experiencing the most effort and stress level. However, this subjective evaluation is not in line with the results of physiological responses. This study concludes that interpersonal interaction inherent to a competitive game mode influences patients' physiological responses. This could mean that social interaction is an important factor to consider when interpreting the results obtained from physiological measurements., (© 2023. The Author(s).)

Interpersonal rehabilitation games, compared to single-player games, enhance motivation and intensity level. Usually, it is complicated to restrict the use of the system to pairs of impaired patients who have a similar skill level. Thus, such games must be dynamically adapted. Difficulty-adaptation algorithms are usually based only on performance parameters. In this way, the patient's condition cannot be considered when adapting the game. Introducing physiological reactions could help to improve decision-making. However, it is difficult to control how social interaction influences physiological reactions, making it difficult to interpret physiological responses. This article aimed to explore the changes in physiological responses due to the social interaction of a competitive game modality. This pilot study involved ten unimpaired participants (five pairs). We defined different therapy sessions: (i) a session without a competitor; (ii) two sessions with a virtual competitor with different difficulty levels; (iii) a competitive game. Results showed a difference in the physiological response in the competitive mode concerning single-player mode only due to the interpersonal game modality. In addition, feedback from participants suggested that it was necessary to keep a certain difficulty level to make the activity more challenging, and therefore be more engaging and rewarding.

In this paper, the analysis of the intensity of muscle activations in different subjects when they perform an industrial task in a repetitive way assisted by a robotic upper-limb exoskeleton is presented. To do that, surface electromyography (EMG) signals were monitored with and without a robotic upper-limb exoskeleton for 10 subjects during a drilling task, a typical tedious maintenance or industrial task. Our results show that wearing the upper-limb exoskeleton substantially reduces muscle activity during a drilling task above head height. Specifically, there is statistically significant differences in the pectoralis major and rhomboids muscles between the groups wearing or not wearing the robotic upper-limb exoskeleton.

Post-stroke neurorehabilitation based on virtual therapies are performed completing repetitive exercises shown in visual electronic devices, whose content represents imaginary or daily life tasks. Currently, there are two ways of visualization of these task. 3D virtual environments are used to get a three dimensional space that represents the real world with a high level of detail, whose realism is determinated by the resolucion and fidelity of the objects of the task. Furthermore, 2D virtual environments are used to represent the tasks with a low degree of realism using techniques of bidimensional graphics. However, the type of visualization can influence the quality of perception of the task, affecting the patient's sensorimotor performance. The purpose of this paper was to evaluate if there were differences in patterns of kinematic movements when post-stroke patients performed a reach task viewing a virtual therapeutic game with two different type of visualization of virtual environment: 2D and 3D. Nine post-stroke patients have participated in the study receiving a virtual therapy assisted by PUPArm rehabilitation robot. Horizontal movements of the upper limb were performed to complete the aim of the tasks, which consist in reaching peripheral or perspective targets depending on the virtual environment shown. Various parameter types such as the maximum speed, reaction time, path length, or initial movement are analyzed from the data acquired objectively by the robotic device to evaluate the influence of the task visualization. At the end of the study, a usability survey was provided to each patient to analysis his/her satisfaction level. For all patients, the movement trajectories were enhanced when they completed the therapy. This fact suggests that patient's motor recovery was increased. Despite of the similarity in majority of the kinematic parameters, differences in reaction time and path length were higher using the 3D task. Regarding the success rates were very similar. In conclusion, the using of 2D environments in virtual therapy may be a more appropriate and comfortable way to perform tasks for upper limb rehabilitation of post-stroke patients, in terms of accuracy in order to effectuate optimal kinematic trajectories.

The aim of rehabilitation robotic area is to research on the application of robotic devices to therapeutic procedures. The goal is to achieve the best possible motor, cognitive and functional recovery for people with impairments following various diseases. Pneumatic actuators are attractive for robotic rehabilitation applications because they are lightweight, powerful, and compliant, but their control has historically been difficult, limiting their use. This article first reviews the current state-of-art in rehabilitation robotic devices with pneumatic actuation systems reporting main features and control issues of each therapeutic device. Then, a new pneumatic rehabilitation robot for proprioceptive neuromuscular facilitation therapies and for relearning daily living skills: like taking a glass, drinking, and placing object on shelves is described as a case study and compared with the current pneumatic rehabilitation devices.