Search

The extracellular matrix (ECM) shapes the stem cell fate during differentiation by exerting relevant biophysical cues. However, the mechanism of stem cell fate decisions in response to ECM-backed complex biophysical cues has not been fully understood due to the lack of versatile ECMs. Here, we designed two versatile ECMs using colloidal self-assembly technology to probe the mechanisms of their effects on mechanotransduction and stem cell fate regulation. Binary colloidal crystals (BCC) with a hexagonally close-packed structure, composed of silica (5 μm) and polystyrene (0.4 μm) particles as well as a polydimethylsiloxane-embedded BCC (BCCP), were fabricated. They have defined surface chemistry, roughness, stiffness, ion release, and protein adsorption properties, which can modulate the cell adhesion, proliferation, and differentiation of human adipose-derived stem cells (hASCs). On the BCC, hASCs preferred osteogenesis at an early stage but showed a higher tendency toward adipogenesis at later stages. In contrast, the results of BCCP diverged from those of BCC, suggesting a unique regulation of ECM-dependent mechanotransduction. The BCC-mediated cell adhesion reduced the size of the focal adhesion complex, accompanying an ordered spatial organization and cytoskeletal rearrangement. This morphological restriction led to the modulation of mechanosensitive transcription factors, such as c-FOS, the enrichment of transcripts in specific signaling pathways such as PI3K/AKT, and the activation of the Hippo signaling pathway. Epigenetic analyses showed changes in histone modifications across different substrates, suggesting that chromatin remodeling participated in BCC-mediated mechanotransduction. This study demonstrates that BCCs are versatile artificial ECMs that can regulate human stem cells' fate through unique biological signaling, which is beneficial in biomaterial design and stem cell engineering.

The blue-to-red chromatic phase transition of polydiacetylene (PDA) is accompanied by the twist and rearrangement of its side chains, which results in shortening of the conjugation length in the backbone. However, how these morphological changes affect its mechanical properties remains elusive. In this work, force spectroscopy mapping by atomic force microscopy was employed to quantify mechanical parameters of PDA thin films such as breakthrough force and Young's modulus at the monomer, blue, and red phases during the chromatic transition. We found that the breakthrough force increased by 113% and Young's modulus decreased by 21% during the blue-to-red transition, highlighting that the subtle change in the side-chain configuration has a dramatic impact on its mechanical properties.

Macrophages are involved in every stage of the innate/inflammatory immune responses in the body tissues, including the resolution of the reaction, and they do so in close collaboration with the extracellular matrix (ECM). Simplified substrates with nanotopographical features attempt to mimic the structural properties of the ECM to clarify the functional features of the interaction of the ECM with macrophages. We still have a limited understanding of the macrophage behavior upon interaction with disordered nanotopography, especially with features smaller than 10 nm. Here, we combine atomic force microscopy (AFM), finite element modeling (FEM), and quantitative biochemical approaches in order to understand the mechanotransduction from the nanostructured surface into cellular responses. AFM experiments show a decrease of macrophage stiffness, measured with the Young's modulus, as a biomechanical response to a nanostructured (ns-) ZrO x surface. FEM experiments suggest that ZrO x surfaces with increasing roughness represent weaker mechanical boundary conditions. The mechanical cues from the substrate are transduced into the cell through the formation of integrin-regulated focal adhesions and cytoskeletal reorganization, which, in turn, modulate cell biomechanics by downregulating cell stiffness. Surface nanotopography and consequent biomechanical response impact the overall behavior of macrophages by increasing movement and phagocytic ability without significantly influencing their inflammatory behavior. Our study suggests a strong potential of surface nanotopography for the regulation of macrophage functions, which implies a prospective application relative to coating technology for biomedical devices.

The cytoskeleton is involved during movement, shaping, resilience, and functionality in immune system cells. Biomarkers such as elasticity and adhesion can be promising alternatives to detect the status of cells upon phenotype activation in correlation with functionality. For instance, professional immune cells such as macrophages undergo phenotype functional polarization, and their biomechanical behaviors can be used as indicators for early diagnostics. For this purpose, combining the biomechanical sensitivity of atomic force microscopy (AFM) with the automation and performance of a deep neural network (DNN) is a promising strategy to distinguish and classify different activation states. To resolve the issue of small datasets in AFM-typical experiments, nanomechanical maps were divided into pixels with additional localization data. On such an enlarged dataset, a DNN was trained by multimodal fusion, and the prediction was obtained by voting classification. Without using conventional biomarkers, our algorithm demonstrated high performance in predicting the phenotype of macrophages. Moreover, permutation feature importance was employed to interpret the results and unveil the importance of different biophysical properties and, in turn, correlated this with the local density of the cytoskeleton. While our results were demonstrated on the RAW264.7 model cell line, we expect that our methodology could be opportunely customized and applied to distinguish different cell systems and correlate feature importance with biophysical properties to unveil innovative markers for diagnostics., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Wu, Zhang, Zhao, Yang and Galluzzi.)

Direct neuronal reprogramming of somatic cells into induced neurons (iNs) has been recently established as a promising approach to generating neuron cells. Previous studies have reported that the biophysical cues of the in vitro microenvironment are potent modulators in the cell fate decision; thus, the present study explores the effects of a customized pattern (named colloidal self-assembled patterns, cSAPs) on iN generation from human fibroblasts using small molecules. The result revealed that the cSAP, composed of binary particles in a hexagonal-close-packed (hcp) geometry, is capable of improving neuronal reprogramming efficiency and steering the ratio of the iN subtypes. Cells exhibited distinct cell morphology, upregulated cell adhesion markers (i.e., SDC1 and ITGAV), enriched signaling pathways (i.e., Hippo and Wnt), and chromatin remodeling on the cSAP compared to those on the control substrates. The result also showed that the iN subtype specification on cSAP was surface-dependent; therefore, the defined physicochemical cue from each cSAP is exclusive. Our findings show that direct cell reprogramming can be manipulated through specific biophysical cues on the artificial matrix, which is significant in cell transdifferentiation and lineage conversion.

The immune response of macrophages plays an important role in defending against viral infection, tumor deterioration and repairing of contused tissue. Macrophage functional differentiation induced by nanodrugs is the leading edge of current research, but nanodrugs have toxic side effects, and the influence of their physical properties on macrophages is not clear. Here we create an alternative way to modulate macrophage function through PLGA-PEG fibers' Young's modulus. Previously, we revealed that by controlling the Young's modulus of the fibers from kPa to MPa, all the fibers entered murine macrophage cells (RWA 264.7) in a similar manner, and based on that, we found that macrophages' mechanical properties were affected by the fibers' Young's modulus, that is, hard fibers with a Young's modulus of ∼1 MPa increased the cell average Young's modulus, but did not affect the cell shape, while soft fibers with a Young's modulus of ∼100 kPa decreased the cell average Young's modulus and modulated the cell shape to a more spherical one. On the other hand, only the soft fibers induced proinflammatory cytokine secretion, indicating an M1 macrophage functional modulation by low Young's modulus fibers. This study explored the mechanical properties of the interactions between PLGA-PEG fibers and cells, in particular, when guiding the direction of the modulation of macrophage function, which is of great significance for the applications of material biology in the biomedical field.

The cytotoxicity of ionic liquids (ILs) has been receiving attention in the context of the biological and environmental impact of their vast field of applications. It has been ascertained that the cell membrane is the main target of ILs when they interact with microorganisms, cells and bacteria; nevertheless, studies at the micro- and nano-scale aiming at better understanding of the fundamental mechanisms of toxicity of ILs are lacking. In this work, we used atomic force microscopy (AFM) to investigate the impact of room-temperature ILs on the mechanical, morphological and electrostatic properties of solid-supported DOPC phospholipid bilayers, taken as models of biomembranes. In particular, we have characterized the concentration-dependent and time-dependent evolution of the morphological, structural and mechanical properties of DOPC lipid membranes in the presence of imidazolium-based ILs with different alkyl chain lengths and hydrophilic/hydrophobic characteristics. The majority of ILs investigated were found to possess the ability of restructuring the lipid bilayer, through the formation of new IL/lipid complexes, showing distinctive morphological features (increase of area and roughness). The nanomechanical analysis of the lipid membrane exposed to ILs revealed a progressive, concentration-dependent perturbation of the structural ordering and rigidity of the membrane, evidenced by a decrease in the breakthrough force, Young's modulus and area stretching modulus. AFM detected a modification of the electrostatic double-layer at the membrane surface, in terms of a reduction of the original negative surface charge density, suggesting a progressive stratification of cations on the exposed leaflet of the lipid membrane. Our findings may be helpful in designing novel ILs with tailored interaction with biological membranes.

Polydopamine (PDA) is a biocompatible cell-adhesive polymer with versatile applications in biomedical devices. Previous studies have shown that PDA coating could improve cell adhesion and differentiation of human mesenchymal stem cells (hMSCs). However, there is still a knowledge gap in the effect of PDA-mediated protein adsorption on the epigenetic status of MSCs. This work used gelatin-coated cell culture surfaces with and without PDA underlayer (Gel and PDA-Gel) to culture and differentiate primary human adipose-derived stem cells (hASCs). The properties of these two substrates were significantly different, which, in combination with a variation in extracellular matrix (ECM) protein bioactivity, regulated cell adhesion and migration. hASCs reduced focal adhesions by downregulating the expression of integrins such as αV, α1, α2, and β1 on the PDA-Gel compared to the Gel substrate. Interestingly, the ratio of H3K27me3 to H3K27me3+H3K4me3 was decreased, but this only occurred for upregulation of AGG and BMP4 genes during chondrogenic differentiation. This result implies that the PDA-Gel surface positively affects the chondrogenic, but not adipogenic and osteogenic, differentiation. In conclusion, for the first time, this study demonstrates the sequential effects of PDA coating on the biophysical property of adsorbed protein and then focal adhesions and differentiation of hMSCs through epigenetic regulation. This study sheds light on PDA-mediated mechanotransduction., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Harati, Tao, Shahsavarani, Du, Galluzzi, Liu, Zhang, Shaw, Shokrgozar, Pan and Wang.)

This study was designed to investigate the regulatory effect of hyaluronic acid (HA)-coating silk fibroin (SF) nanofibers during epithelialization of urinary tract for urethral regeneration. The obtained electrospun biomimetic tubular HA-SF nanofiber scaffold is composed of a dense inner layer and a porous outer layer in order to mimic adhesion and cavernous layers of the native tissue, respectively. A thin layer of HA-gel coating was fixed in the inner wall to provide SF nanofibers with a dense and smooth surface nano-topography and higher hydrophilicity. Compared with pure SF nanofibers, HA-SF nanofibers significantly promoted the adhesion, growth, and proliferation of primary urothelial cells, and up-regulate the expression of uroplakin-3 (terminal differentiation keratin protein in urothelium). Using the New Zealand male rabbit urethral injury model, the scaffold composed of tubular HA-SF nanofibers could recruit lumen and myoepithelial cells from the adjacent area of the host, rapidly reconstructing the urothelial barrier in the wound area in order to keep the urinary tract unobstructed, thereby promoting luminal epithelialization, smooth muscle bundle structural remodeling, and capillary formation. Overall, the synergistic effects of nano-topography and biophysical cues in a biomimetic scaffold design for effective endogenous regeneration., Competing Interests: All authors declared no potential conflicts of interest., (© 2021 The Authors. Bioengineering & Translational Medicine published by Wiley Periodicals LLC on behalf of American Institute of Chemical Engineers.)

Chemodynamic therapy (CDT) is an emerging treatment that usually employs chemical agents to decompose hydrogen peroxide (H 2 O 2 ) into hydroxyl radical (•OH) via Fenton or Fenton-like reactions, inducing cell apoptosis or necrosis by damaging biomacromolecules such as, lipids, proteins, and DNA. Generally, CDT shows high tumor-specificity and minimal-invasiveness in patients, thus it has attracted extensive research interests. However, the catalytic reaction efficiency of CDT is largely limited by the relatively high pH at the tumor sites. Herein, a 808 nm laser-potentiated peroxidase catalytic/mild-photothermal therapy of molybdenum diphosphide nanorods (MoP 2 NRs) is developed to improve CDT performance, and simultaneously achieve effective tumor eradication and anti-infection. In this system, MoP 2 NRs exhibit a favorable cytocompatibility due to their inherent excellent elemental biocompatibility. Upon irradiation with an 808 nm laser, MoP 2 NRs act as photosensitizers to efficiently capture the photo-excited band electrons and valance band holes, exhibiting enhanced peroxidase-like catalytic activity to sustainedly decompose tumor endogenous H 2 O 2 to •OH, which subsequently destroy the cellular biomacromolecules both in tumor cells and bacteria. As demonstrated both in vitro and in vivo, this system exhibits a superior therapeutic efficiency with inappreciable toxicity. Hence, the work may provide a promising therapeutic technique for further clinical applications., Competing Interests: The authors declare no conflict of interest., (© 2021 The Authors. Advanced Science published by Wiley‐VCH GmbH.)

One of the main challenges of tissue-engineered vascular prostheses is restenosis due to intimal hyperplasia. The aim of this study is to develop a material for scaffolds able to support cell growth while tolerating physiological conditions and maintaining the patency of carotid artery model. Tubular hyaluronic acid (HA)-functionalized collagen nanofibrous composite scaffolds were prepared by sequential electrospinning method. The tubular composite scaffold has well-controlled biophysical and biochemical signals, providing a good matrix for the adhesion and proliferation of vascular endothelial cells (ECs), but resisting to platelets adhesion when exposed to blood. Carotid artery replacement experiment from 6-week rabbits showed that the HA/collagen nanofibrous composite scaffold grafts with endothelialization on the luminal surface could maintain vascular patency. At retrieval, the composite scaffold maintained good structural integrity and had comparable mechanical strength as the native artery. This study indicating that electrospun scaffolds combined with cells may become an alternative to prosthetic grafts for vascular reconstruction., (© 2021. The Author(s).)

This work was designed to evaluate the efficacy of hyaluronic acid (HA) functionalized tubular poly-lactic acid (PLA) microfibers in directing the luminal pre-endothelialization of vascular endothelial cells (ECs). Tubular HA/PLA microfibers with hierarchical architecture were prepared by electrospinning and chemical cross-linking process. A layer of HA microfibrous film coating was fixed on the inner wall surface of the tubular HA/PLA microfibers, resulting in higher anisotropy wettability and relatively lower surface energy and roughness. We confirmed that HA coating on PLA microfibers surface have reduced hemolytic activity and coagulation degree. Mouse vascular ECs exhibited surface-dependent differences in cell elongation and proliferation (HA/PLA > PLA). Compared with PLA microfibers, the gene expression levels of platelet EC adhesion molecule-1 (PECAM-1/CD31) and vascular endothelial growth factor (VEGF) in ECs of HA/PLA microfibers surface were up-regulated. Immunostaining analysis revealed that the surface of HA/PLA nanofibers supported the expression of mature vascular EC phenotype CD31 protein. In vitro co-culture analysis showed that the luminal pre-endothelialization induced vascular smooth muscle cells (SMCs) to maintain their phenotypic shape and establish natural behavior patterns in the hierarchical tubular scaffold. These studies indicate that the biophysical cues of scaffolds are potent regulators of vascular EC endothelialization., (Copyright © 2021. Published by Elsevier B.V.)

In this study, we designed and synthetized artificial vascular scaffolds based on nanofibers of collagen functionalized with hyaluronic acid (HA) in order to direct the phenotypic shape, proliferation, and complete endothelization of mouse primary aortic endothelial cells (PAECs). Layered tubular HA/collagen nanofibers were prepared using electrospinning and crosslinking process. The obtained scaffold is composed of a thin inner layer and a thick outer layer that structurally mimic the layer the intima and media layers of the native blood vessels, respectively. Compared with the pure tubular collagen nanofibers, the surface of HA functionalized collagen nanofibers has higher anisotropic wettability and mechanical flexibility. HA/collagen nanofibers can significantly promote the elongation, proliferation and phenotypic shape expression of PAECs. In vitro co-culture of mouse PAECs and their corresponding smooth muscle cells (SMCs) showed that the luminal endothelialization governs the biophysical integrity of the newly formed extracellular matrix (e.g., collagen and elastin fibers) and structural remodeling of SMCs. Furthermore, in vitro hemocompatibility assays indicated that HA/collagen nanofibers have no detectable degree of hemolysis and coagulation, suggesting their promise as engineered vascular implants.

Owing to their peculiar oxidative effect, silver cations (Ag + ) are well known for their antimicrobial properties and explored as therapeutic agents for biomedical applications. Size control with improved dispersion and stability are the key factors of Ag NPs (silver nanoparticles) to be used in biomedical applications. Silver based nano-materials are highly efficient due to their biological, chemical and physical properties in comparison with bulk silver. Atomic scale fabrication is achieved by rearranging the internal components of a material, in turn, influencing the mechanical, electrical, magnetic, thermal and chemical properties. For instance, size and shape have a strong impact on the optical, thermal and catalytic properties of Ag NPs. Such properties can be tuned by controlling the surface/volume ratio of Ag nanostructures with a small size (ideally <100 nm), in turn showing peculiar biological activity different from that of bulk silver. Silver nanomaterials such as nanoparticles, thin films and nanorods can be synthesized by various physical, chemical and biological methods whose most recent implementations will be described in this review. By controlling the structure-functionality relationship, silver based nano-materials have high potential for commercialization in biomedical applications. Antimicrobial, antifungal, antiviral, and anti-inflammatory Ag NPs can be applied in several fields such as pharmaceutics, sensors, coatings, cosmetics, wound healing, bio-labelling agents, antiviral drugs, and packaging.

Efficient point-of-care diagnosis of severe acute respiratory syndrome-corovavirus-2 (SARS-CoV-2) is crucial for the early control of novel coronavirus infections. At present, polymerase chain reaction (PCR) is primarily used to detect SARS-CoV-2. Despite the high sensitivity, the PCR process is time-consuming and complex which limits its applicability for rapid testing of large-scale outbreaks. Here, we propose a rapid and easy-to-implement approach for SARS-CoV-2 detection based on surface enhanced infrared absorption (SEIRA) spectroscopy. The evaporated gold nano-island films are used as SEIRA substrates which are functionalized with the single-stranded DNA probes for specific binding to selected SARS-CoV-2 genomic sequences. The infrared absorption spectra are analyzed using the principal component analysis method to identify the key characteristic differences between infected and control samples. The SEIRA-based biosensor demonstrates rapid detection of SARS-CoV-2, completing the detection of 1 μM viral nucleic acids within less than 5 min without any amplification. When combined with the recombinase polymerase amplification treatment, the detection capability of 2.98 copies per μL (5 aM) can be completed within 30 min. This approach provides a simple and economical alternative for COVID-19 diagnosis, which can be potentially useful in monitoring and controlling future pandemics in a timely manner.

Shape-morphing hydrogels can be widely used to develop artificial muscles, reconfigurable biodevices, and soft robotics. However, conventional approaches for developing shape-morphing hydrogels highly rely on composite materials or complex manufacturing techniques, which limit their practical applications. Herein, we develop an unprecedented strategy to edit the shape morphing of monocomponent natural polysaccharide hydrogel films via integrating gradient cross-linking density and geometry effect. Owing to the synergistic effect, the shape morphing of chitosan (CS) hydrogel films with gradient cross-linking density can be facilely edited by changing their geometries (length-to-width ratios or thicknesses). Therefore, helix, short-side rolling, and long-side rolling can be easily customized. Furthermore, various complex artificial 3D deformations such as artificial claw, horn, and flower can also be obtained by combining various flat CS hydrogel films with different geometries into one system, which can further demonstrate various shape transformations as triggered by pH. This work offers a simple strategy to construct a monocomponent hydrogel with geometry-directing programmable deformations, which provides universal insights into the design of shape-morphing polymers and will promote their applications in biodevices and soft robotics., Competing Interests: The authors declare no conflict of interest., (Copyright © 2021 Hao Hu et al.)

Fluorescent imaging combined with atomic force microscopy (AFM), namely AFM-fluorescence correlative microscopy, is a popular technology in life science. However, the influence of involved fluorophores on obtained mechanical information is normally underestimated, and such subtle changes are still challenging to detect. Herein, we combined AFM with laser light excitation to perform a mechanical quantitative analysis of a model membrane system labeled with a commonly used fluorophore. Mechanical quantification was additionally validated by finite element simulations. Upon staining, we noticed fluorophores forming a diffuse weakly organized overlayer on phospholipid supported membrane, easily detected by AFM mechanics. The laser was found to cause a degradation of mechanical stability of the membrane synergically with presence of fluorophore. In particular, a 30 min laser irradiation, with intensity similar to that in typical confocal scanning microscopy experiment, was found to result in a ∼40% decrease in the breakthrough force of the stained phospholipid bilayer along with a ∼30% reduction in its apparent elastic modulus. The findings highlight the significance of analytical power provided by AFM, which will allow us to "see" the "unseen" in correlative microscopy, as well as the necessity to consider photothermal effects when using fluorescent dyes to investigate, for example, the deformability and permeability of phospholipid membranes., Competing Interests: BZ was employed by the companies DGene (Dongjin Big Health (Shenzhen)) Co., Ltd, and BenHealth Biopharmaceutical (Shenzhen) Co., Ltd. The remaining authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Galluzzi, Zhang, Zhang, Wang, Lin, Yu, Chu and Li.)

The specific binding of fluorescent probes or biomolecules to the actin cytoskeleton network is increasingly important for monitoring various complex cellular activities such as cell adhesion, proliferation, locomotion, endocytosis, and cell division. However, improving cell uptake and subcellular resolution is still the main obstacle for successful and wide application of cellular fluorescent probes. Here, we designed and synthesized an amphiphilic block polyurethane with peculiar photophysical properties of aggregation induced emission (AIE), which can be used in living cell imaging to promote selective visualization of cell structures. The AIE effect polyurethane (abbreviated as AIE-PU) was prepared by two-step polymerization of diisocyanate terminated polyethylene glycol and polycaprolactone with hydroxyl terminated AIE dye. A series of characterization techniques proved the successful synthesis of AIE-PU. Due to the amphiphilic chain segment of its linear block molecule, AIE-PU block copolymers can self-assemble into spherical nanoparticles in aqueous solution, showing relatively stable photophysical properties and good water dispersion. Cellular experiments demonstrated that AIE-PUs have low toxicity and high actin network affinity. Moreover, the uptake mechanism was studied by low temperature and metabolic inhibition experiments, showing that AIE-PU nanoparticles could be easily internalized into different living cells through energy-dependent endocytosis, and can be transported from the cellular periphery to the actin network via clathrin- and caveolae-dependent transport pathway. Upon binding with the actin network, the inter-chain AIE mechanism of the probe was significantly enhanced, which is pivotal for the long-term stable fluorescence imaging of actin microfilament network in living cells. Finally, compared with commercial actin dyes, this probe showed higher photostability, even after a longer retention time, without significant fluorescence quenching., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Inc. All rights reserved.)

Reconstruction of peripheral nerve defects with tissue engineered nerve scaffolds is an exciting field of biomedical research and holds potential for clinical application. However, due to poor neovascularization after the implantation, nerve regeneration is still not satisfactory, especially for large nerve defects. These obstacles hinder the investigation of basic neurobiological principles and development of a wide range of treatments for peripheral nerve diseases. Herein, we designed an amphiphilic alternating block polyurethane (abbreviated as PU) copolymer-based nerve guidance scaffold, which has good Schwann cell compatibility, and more importantly, a rapid vascularization of the scaffold in vivo. In the sciatic nerve transection model of SD rats, vascularized PU nerve guidance scaffolds induced rapid regeneration of nerve fibers and axons along the scaffold. Through the analysis of nerve electrophysiology, sciatic nerve functional index, histology, and immunofluorescence related to angiogenesis, we determined that PU with rapid vascularization function enhances recovery and re-obtains nerve conduction function. Our study points out a new strategy of using nerve tissue engineering scaffolds to treat large nerve defects.

Plasticity and functional diversity of macrophages play an important role in resisting pathogens invasion, tumor progression and tissue repair. At present, nanodrug formulations are becoming increasingly important to induce and control the functional diversity of macrophages. In this framework, the internalization process of nanodrugs is co-regulated by a complex interplay of biochemistry, cell physiology and cell mechanics. From a biophysical perspective, little is known about cellular mechanics' modulation induced by the nanodrug carrier's internalization. In this study, we used the polylactic-co-glycolic acid (PLGA)-polyethylene glycol (PEG) nanofibers as a model drug carrier, and we investigated their influence on macrophage mechanics. Interestingly, the nanofibers internalized in macrophages induced a local increase of stiffness detected by atomic force microscopy (AFM) nanomechanical investigation. Confocal laser scanning microscopy revealed a thickening of actin filaments around nanofibers during the internalization process. Following geometry and mechanical properties by AFM, indentation experiments are virtualized in a finite element model simulation. It turned out that it is necessary to include an additional actin wrapping layer around nanofiber in order to achieve similar reaction force of AFM experiments, consistent with confocal observation. The quantitative investigation of actin reconfiguration around internalized nanofibers can be exploited to develop novel strategies for drug delivery.

Atomic force microscopy (AFM) indentation is a popular method for characterizing the micromechanical properties of soft materials such as living cells. However, the mechanical data obtained from deep indentation measurements can be difficult and problematic to interpret as a result of the complex geometry of a cell, the nonlinearity of indentation contact, and constitutive relations of heterogeneous hyperelastic soft components. Living MDA-MB-231 cells were indented by spherical probes to obtain morphological and mechanical data that were adopted to build an accurate finite element model (FEM) for a parametric study. Initially, a 2D-axisymmetric numerical model was constructed with the main purpose of understanding the effect of geometrical and mechanical properties of constitutive parts such as the cell body, nucleus, and lamellipodium. A series of FEM deformation fields were directly compared with atomic force spectroscopy in order to resolve the mechanical convolution of heterogeneous parts and quantify Young's modulus and the geometry of nuclei. Furthermore, a 3D finite element model was constructed to investigate indentation events located far from the axisymmetric geometry. In this framework, the joint FEM/AFM approach has provided a useful methodology and a comprehensive characterization of the heterogeneous structure of living cells, emphasizing the deconvolution of geometrical structure and the true elastic modulus of the cell nucleus.

Aluminum (Al) is one of the most attractive anode materials for lithium-ion batteries (LIBs) due to its high theoretical specific capacity, excellent conductivity, abundance, and especially low cost. However, the large volume expansion, originating from the uneven alloying/dealloying reactions in the charge/discharge process, causes structural stress and electrode pulverization, which has long hindered its practical application, especially when assembled with a high-areal-density cathode. Here, an inactive (Cu) and active (Al) co-deposition strategy is reported to homogeneously distribute the alloying sites and disperse the stress of volume expansion, which is beneficial to obtain the structural stability of the Al anode. Owing to the homogeneous reaction and uniform distribution of stress during the charge/discharge process, the assembled full battery (LiFePO 4 cathode with a high areal density of ≈7.4 mg cm -2 ) with the Cu-Al@Al anode, achieves a high capacity retention of ≈88% over 200 cycles, suggesting the feasibility of the interfacial design to optimize the structural stability of alloying metal anodes for high-performance LIBs., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The study of the toxicity, biocompatibility, and environmental sustainability of room-temperature ionic liquids (ILs) is still in its infancy. Understanding the impact of ILs on living organisms, especially from the aquatic ecosystem, is urgent, since large amounts of these substances are starting to be employed as solvents in industrial chemical processes, and on the other side, evidence of toxic effects of ILs on microorganisms and single cells have been observed. To date, the toxicity of ILs has been investigated by means of macroscopic assays aimed at characterizing the effective concentrations (like the EC 50 ) that cause the death of a significant fraction of the population of microorganisms and cells. These studies allow us to identify the cell membrane as the first target of the IL interaction, whose effectiveness was correlated to the lipophilicity of the cation, i.e., to the length of the lateral alkyl chain. Our study aimed at investigating the molecular mechanisms underpinning the interaction of ILs with living cells. To this purpose, we carried out a combined topographic and mechanical analysis by atomic force microscopy of living breast metastatic cancer cells (MDA-MB-231) upon interaction with imidazolium-based ILs. We showed that ILs are able to induce modifications of the overall rigidity (effective Young's modulus) and morphology of the cells. Our results demonstrate that ILs act on the physical properties of the outer cell layer (the membrane linked to the actin cytoskeleton), already at concentrations below the EC 50 . These potentially toxic effects are stronger at higher IL concentrations, as well as with longer lateral chains in the cation.

Atomic force microscopy has proven to be a valuable technique to characterize the mechanical and morphological properties of heterogeneous soft materials such as biological specimens in liquid environment. Here we propose a 3-step method in order to investigate biological specimens where heterogeneity hinder a quantitative characterization: (1) precise AFM calibration, (2) nano-indentation in force volume mode, (3) array of finite element simulations built from AFM indentation events. We combine simulations to determine internal geometries, multi-layer material properties, and interfacial friction. In order to easily perform this analysis from raw AFM data to simulation comparison, we propose a standalone software, AFMech Suite comprising five interacting interfaces for simultaneous calibration, morphology, adhesion, mechanical, and simulation analysis. We test the methodology on soft hydrogels with hard spherical inclusions, as a soft-matter model system. Finally, we apply the method on E. coli bacteria supported on soft/hard hydrogels to prove usefulness in biological field.

Atomic force microscopy (AFM) indentation is the most suitable way to characterize micromechanical properties of soft materials such as bio tissues. However, the mechanical data obtained from force-indentation measurement are still not well understood due to complex geometry of the bio tissue, nonlinearity of indentation contact, and constitutive relation of hyperelastic soft material. Poly-N-isopropyl acrylamide (PNIPAM) filled with 5wt% polystyrene (PS) sphere particles material system can be utilized as a simplified model for mimicking a whole host of soft materials. Finite element model has been constructed to simulate indentation as in AFM experiments using colloidal probes for a parametric study, with the main purpose of understanding the effect of particles on overall behavior of mechanical data and local deformation field under indentation contact. Direct comparison between finite element simulation and indentation data from AFM experiments provides a powerful method to characterize soft materials properties quantitatively, addressing the lack of analytical solutions for hard-soft composites, both biological and synthetic ones. In this framework, quantitative relations are found between the depth, at which the particle was embedded, the particle size and the elastic modulus of the overall composite. Comprehensive characterizations were established to distinguish indentation on a particle residing on top of the hydrogel from a particle embedded inside the hydrogel matrix. Finally, different assumptions of interface friction at the boundary between the particle and the hydrogel have been tested and directly compared with experimental measurements., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

We present a procedure that allows a reliable determination of the elastic (Young's) modulus of soft samples, including living cells, by atomic force microscopy (AFM). The standardized nanomechanical AFM procedure (SNAP) ensures the precise adjustment of the AFM optical lever system, a prerequisite for all kinds of force spectroscopy methods, to obtain reliable values independent of the instrument, laboratory and operator. Measurements of soft hydrogel samples with a well-defined elastic modulus using different AFMs revealed that the uncertainties in the determination of the deflection sensitivity and subsequently cantilever's spring constant were the main sources of error. SNAP eliminates those errors by calculating the correct deflection sensitivity based on spring constants determined with a vibrometer. The procedure was validated within a large network of European laboratories by measuring the elastic properties of gels and living cells, showing that its application reduces the variability in elastic moduli of hydrogels down to 1%, and increased the consistency of living cells elasticity measurements by a factor of two. The high reproducibility of elasticity measurements provided by SNAP could improve significantly the applicability of cell mechanics as a quantitative marker to discriminate between cell types and conditions.

Nanohybrids of graphene with water soluble polymer were synthesized using 'grafting from' method. GO, prepared by modified Hummers' method, was first reacted with sodium azide. Alkyne-terminated RAFT-CTA was synthesized by reaction of propargyl alcohol and S-1-dodecyl-S'-(α,α'-dimethyl-α"-acetic acid) trithiocarbonate. RAFT-CTA was grafted onto the GO sheets by facile click-reaction and subsequently, N-isopropylacrylamide (NIPAM) and N-ethyleacrylamide (NEAM) were polymerized on graphene sheets via RAFT polymerization method. The respective copolymers with different ratios were also prepared. The nanohybrids were characterized by FTIR, XRD, TGA, Raman, SEM, and AFM. Both SEM and AFM clearly showed rod-like structures for rGO-PNEAM. XRD showed a small peak at 2θ = 19.21°, corresponding to d-spacing ≈ 4.6 Å. In addition, the nanohybrids showed a very broad temperature range for the LCST in water between ca. 30 and 70 °C.

Here, we present the first observation of magneto-transport properties of graphene foam (GF) composed of a few layers in a wide temperature range of 2-300 K. Large room-temperature linear positive magnetoresistance (PMR ≈ 171% at B ≈ 9 T) has been detected. The largest PMR (∼213%) has been achieved at 2 K under a magnetic field of 9 T, which can be tuned by the addition of poly(methyl methacrylate) to the porous structure of the foam. This remarkable magnetoresistance may be the result of quadratic magnetoresistance. The excellent magneto-transport properties of GF open a way toward three-dimensional graphene-based magnetoelectronic devices.

Background: Thanks to mechanotransductive components cells are competent to perceive nanoscale topographical features of their environment and to convert the immanent information into corresponding physiological responses. Due to its complex configuration, unraveling the role of the extracellular matrix is particularly challenging. Cell substrates with simplified topographical cues, fabricated by top-down micro- and nanofabrication approaches, have been useful in order to identify basic principles. However, the underlying molecular mechanisms of this conversion remain only partially understood., Results: Here we present the results of a broad, systematic and quantitative approach aimed at understanding how the surface nanoscale information is converted into cell response providing a profound causal link between mechanotransductive events, proceeding from the cell/nanostructure interface to the nucleus. We produced nanostructured ZrO2 substrates with disordered yet controlled topographic features by the bottom-up technique supersonic cluster beam deposition, i.e. the assembling of zirconia nanoparticles from the gas phase on a flat substrate through a supersonic expansion. We used PC12 cells, a well-established model in the context of neuronal differentiation. We found that the cell/nanotopography interaction enforces a nanoscopic architecture of the adhesion regions that affects the focal adhesion dynamics and the cytoskeletal organization, which thereby modulates the general biomechanical properties by decreasing the rigidity of the cell. The mechanotransduction impacts furthermore on transcription factors relevant for neuronal differentiation (e.g. CREB), and eventually the protein expression profile. Detailed proteomic data validated the observed differentiation. In particular, the abundance of proteins that are involved in adhesome and/or cytoskeletal organization is striking, and their up- or downregulation is in line with their demonstrated functions in neuronal differentiation processes., Conclusion: Our work provides a deep insight into the molecular mechanotransductive mechanisms that realize the conversion of the nanoscale topographical information of SCBD-fabricated surfaces into cellular responses, in this case neuronal differentiation. The results lay a profound cell biological foundation indicating the strong potential of these surfaces in promoting neuronal differentiation events which could be exploited for the development of prospective research and/or biomedical applications. These applications could be e.g. tools to study mechanotransductive processes, improved neural interfaces and circuits, or cell culture devices supporting neurogenic processes.

The molecular clutch (MC) model proposes that actomyosin-driven force transmission permits integrin-dependent cell migration. To investigate the MC, we introduced diverse talin (TLN) and integrin variants into Flp-In™ T-Rex™ HEK293 cells stably expressing uPAR. Vitronectin variants served as substrate providing uPAR-mediated cell adhesion and optionally integrin binding. This particular system allowed us to selectively analyse key MC proteins and interactions, effectively from the extracellular matrix substrate to intracellular f-actin, and to therewith study mechanobiological aspects of MC engagement also uncoupled from integrin/ligand binding. With this experimental approach, we found that for the initial PIP2-dependent membrane/TLN/f-actin linkage and persistent lamellipodia formation the C-terminal TLN actin binding site (ABS) is dispensable. The establishment of an adequate MC-mediated lamellipodial tension instead depends predominantly on the coupling of this C-terminal TLN ABS to the actomyosin-driven retrograde actin flow force. This lamellipodial tension is crucial for full integrin activation eventually determining integrin-dependent cell migration. In the integrin/ligand-independent condition the frictional membrane resistance participates to these processes. Integrin/ligand binding can also contribute but is not necessarily required., (Copyright © 2015 Elsevier GmbH. All rights reserved.)

Atomic Force Microscopy (AFM) has a great potential as a tool to characterize mechanical and morphological properties of living cells; these properties have been shown to correlate with cells' fate and patho-physiological state in view of the development of novel early-diagnostic strategies. Although several reports have described experimental and technical approaches for the characterization of cellular elasticity by means of AFM, a robust and commonly accepted methodology is still lacking. Here, we show that micrometric spherical probes (also known as colloidal probes) are well suited for performing a combined topographic and mechanical analysis of living cells, with spatial resolution suitable for a complete and accurate mapping of cell morphological and elastic properties, and superior reliability and accuracy in the mechanical measurements with respect to conventional and widely used sharp AFM tips. We address a number of issues concerning the nanomechanical analysis, including the applicability of contact mechanical models and the impact of a constrained contact geometry on the measured Young's modulus (the finite-thickness effect). We have tested our protocol by imaging living PC12 and MDA-MB-231 cells, in order to demonstrate the importance of the correction of the finite-thickness effect and the change in Young's modulus induced by the action of a cytoskeleton-targeting drug.

The urokinase-type plasminogen activator receptor (uPAR) is a non-integrin vitronectin (VN) cell adhesion receptor linked to the plasma membrane by a glycolipid anchor. Through structure-function analyses of uPAR, VN and integrins, we document that uPAR-mediated cell adhesion to VN triggers a novel type of integrin signalling that is independent of integrin-matrix engagement. The signalling is fully active on VN mutants deficient in integrin binding site and is also efficiently transduced by integrins deficient in ligand binding. Although integrin ligation is dispensable, signalling is crucially dependent upon an active conformation of the integrin and its association with intracellular adaptors such as talin. This non-canonical integrin signalling is not restricted to uPAR as it poses no structural constraints to the receptor mediating cell attachment. In contrast to canonical integrin signalling, where integrins form direct mechanical links between the ECM and the cytoskeleton, the molecular mechanism enabling the crosstalk between non-integrin adhesion receptors and integrins is dependent upon membrane tension. This suggests that for this type of signalling, the membrane represents a critical component of the molecular clutch., (© 2014 The Authors.)

Phospholipid monolayers on mercury (Hg) surfaces have received substantial and extensive scientific interest not only because of their use as a biomembrane model but also for their application as a successful toxicity-sensing element. The monolayers show characteristic and very reproducible phase transitions manifest as consecutive voltammetric peaks in response to applied transverse electric fields. Unfortunately, apart from the results of simulation studies, there is a lack of data on the lipid phase structures to help interpret these voltammetric peaks. In this paper we report on the direct measurement of the structural changes underlying the phase transitions of phospholipid layers of dioleoyl phosphatidylcholine (DOPC) at electrified Hg surfaces using atomic force microscopy force-distance techniques. These direct measurements enable a description of the following structural changes in fluid lipid assemblies on a liquid electrode within an increasing transverse electric field. At about -1.0 V (vs Ag/AgCl) a field-facilitated ingress of ions and water into the monolayer results in a phase transition to a structured 2D emulsion. This is followed by a further phase transition at more negative potentials involving the readsorption of bilayer patches. At stronger values of field the bilayer patches form semivesicles, which subsequently collapse to form a monolayer of uncertain composition at very negative potentials. The observation that a monolayer on Hg converts to a bilayer by increasing the applied potential has allowed techniques to be developed for preparing and characterizing a near-continuous DOPC bilayer on Hg in an applied potential window within -1.0 and -1.4 V (vs Ag/AgCl).

To test the biocompatible character of room-temperature ionic liquids (ILs), the interaction of various ILs with biological membrane (biomembrane) models was studied in this work. Dioleoyl phosphatidylcholine (DOPC) adsorbed on a mercury (Hg) electrode forms an impermeable defect-free monolayer which is a well established biomembrane model, prone to be studied by electrochemical techniques. We have monitored the modifications of the Hg supported monolayer caused by ILs using rapid cyclic voltammetry (RCV), alternating current voltammetry (ACV), and electrochemical impedance spectroscopy (EIS). A series of imidazolium-based ILs were investigated whose interaction highlighted the role of anion and lateral side chain of cation during the interaction with DOPC monolayers. It was shown that the hydrophobic and lipophilic character of the IL cations is a primary factor responsible for this interaction. Hg-supported monolayers provide an accurate analysis of the behavior of ILs at the interface of a biomembrane leading to a comprehensive understanding of the interaction mechanisms involved. At the same time, these experiments show that the Hg-phospholipid model is an effective toxicity sensing technique as shown by the correlation between literature in vivo toxicity data and the data from this study.