Search

The validation of a feasible application for the production of sustainable bricks with local materials in humid and hot climates, which would allow the current housing needs of a constantly growing population with scarce economic resources to be met while also reducing energy inputs for climate control, is a current challenge without a definitive solution. Therefore, this research studied the incorporation of local aggregates and two second-generation materials to produce lime-stabilized Compressed Earth Blocks (CSEBs) using a semi-automatic machine for their manufacture. An initial matrix was designed as a baseline, and three more were developed with variations to incorporate second-generation materials individually and as mixtures. The stabilizer was added in concentrations of 5, 10, and 15%, resulting in a total of 12 batches of CSEBs. Eleven of the studied batches exceed the normative limits for simple compressive strength and initial water absorption coefficient. The best result of simple compressive strength was obtained in two batches of the same matrix that used construction demolition waste (CDW), reaching 4.3 MPa (43% above the minimum limit established by the most restrictive regulations and 115% above the least restrictive). It was possible to produce sustainable bricks in situ with average ambient temperatures of 32 °C and relative humidity of 91%.

The porosity of mortars with recycled ceramic aggregates (10, 20, 30, 50, and 100% as a replacement of natural aggregate) was evaluated and analyzed using three different techniques. The results of gas adsorption (N 2 ), Scanning Electron Microscopy (SEM) image analysis and open porosity allowed establishing the relationship between the recycled aggregate content and the porosity of these mortars, as well as the relationship between porosity and the physical and mechanical properties of the mortars: absorption, density, compressive strength, modulus of elasticity, and drying shrinkage. Using the R 2 coefficient and the equation typology as criteria, additional data such as Brunauer, Emmett, and Teller (BET) surface area (N 2 adsorption) established significant correlations with the mentioned properties; with SEM image analysis, no explanatory relationships could be established; and with open porosity, revealing relationships were established (R 2 > 0.9). With the three techniques, it was confirmed that the increase in porosity is related to the increase in the amount of ceramic aggregate; in particular with gas adsorption (N 2 ) and open porosity. It was concluded that the open porosity technique can explain the behavior of these recycled mortars with more reliable data, in a simple and direct way, linked to its establishment with a more representative sample of the mortar matrix.

The construction sector generates 14,000 t/d of construction waste in Mexico City, these materials do not have real applications and end up accumulating in landfills. This work, the objective of which was to analyze the physicochemical and mineralogical properties of soil and construction waste used in the manufacture of Recoblocks, is divided in five stages. First, the excavation material was submitted to field tests. Physical and chemical tests were then carried out on construction waste. Subsequently, the optimal mixture for making Recoblocks was determined. Next, Recoblocks were evaluated and compared with blocks made with water only, without mucilage of Opuntia ficus, and finally a feasibility study was performed. The X-ray diffraction study showed the presence of plagioclase, minerals that improve bending resistance, hardness, durability, as well as resistance to stress in a material. Compared to blocks manufactured without mucilage, the use of Opuntia ficus mucilage increased the compressive strength of the material by 59%, as well as the erodibility. Recoblocks are an environmentally friendly option because they are based on recycled materials, dried under the sun, which eliminates the use of brick oven. The production cost per unit is just USD 0.19, so it is a viable option as a building material.

This study analyzes the effect of using waste by-products generated in the process of granite cutting as part of the granular structure of Ultra High Performance Concrete (UHPC). The manufactured concrete has a compressive strength greater than 115 MPa. This study substitutes 35%, 70% and 100% of the volume of micronized quartz powder (<40 μm) with granite cutting waste. This is an innovative study where the feasibility of using waste from granite quarries as a replacement for micronized quartz in UHPC has been analyzed. The results show an improvement in the workability and compressive strength of UHPC, for all substitution ratios. The flexural strength and tensile strength increase when the substitution ratio is 35%, and even the values obtained for 100% substitution are acceptable. In view of the results obtained in this study, granite cutting waste, instead of the micronized quartz powder usually used, is a viable alternative for the manufacture of expectedly more sustainable UHPC.

In the field of construction, sustainable building materials are currently undergoing a process of technological development. This study aims to contribute to understanding the behavior of the fundamental properties of concretes prepared with recycled coarse aggregates that incorporate a polyethylene terephthalate (PET)-based additive in their matrix (produced by synthesis and glycolysis of recycled PET bottles) in an attempt to reduce their high porosity. Techniques to measure the gas adsorption, water porosity, Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) were used to evaluate the effect of the additive on the physical, mechanical and microstructural properties of these concretes. Porosity reductions of up to 30.60% are achieved with the addition of 1%, 3%, 4%, 5%, 7% and 9% of the additive, defining a new state in the behavioral model of the additive (the overdosage point) in the concrete matrix; in addition, the porous network of these concretes and their correlation with other physical and mechanical properties are also explained.

The difficult current environmental situation, caused by construction industry residues containing ceramic materials, could be improved by using these materials as recycled aggregates in mortars, with their processing causing a reduction in their use in landfill, contributing to recycling and also minimizing the consumption of virgin materials. Although some research is currently being carried out into recycled mortars, little is known about their stress-strain (σ-ε); therefore, this work will provide the experimental results obtained from recycled mortars with recycled ceramic aggregates (with contents of 0%, 10%, 20%, 30%, 50% and 100%), such as the density and compression strength, as well as the σ-ε curves representative of their behavior. The values obtained from the analytical process of the results in order to finally obtain, through numerical analysis, the equations to predict their behavior (related to their recycled content) are those of: σ (elastic ranges and failure maximum), ε (elastic ranges and failure maximum), and Resilience and Toughness. At the end of the investigation, it is established that mortars with recycled ceramic aggregate contents of up to 20% could be assimilated just like mortars with the usual aggregates, and the obtained prediction equations could be used in cases of similar applications.