Search

Hypothesis: Droplet coalescence process is important in many applications and has been studied extensively when two droplets are surrounded by gas. However, the coalescence dynamics would be different when the two droplets are surrounded by an external viscous liquid. The coalescence of immiscible droplets in liquids has not been explored., Experiments: In the present research, the coalescence of two immiscible droplets in low- and high-viscosity liquids is investigated and compared with their miscible counterparts experimentally. The coalescence dynamics is investigated via high-speed imaging, and theoretical models are proposed to analyze the growth of the liquid bridge., Findings: We find that, the liquid bridge r evolves differently due to the constraint from the triple line in the bridge region, which follows r∝t 2/3 for low-viscosity surroundings. While for high-viscosity surroundings, the liquid bridge grows at a constant velocity u r which varies with the surrounding viscosity μ s as [Formula: see text] . In the later stage of the bridge growth, the bridge evolution again merges with the well-established power-law regime r∝t 1/2 , being either in low or high-viscosity liquids. Moreover, a new inertia-viscous-capillary timescale is proposed, which unifies the combined influence of inertia, viscous, and capillary forces on the evolution of the liquid bridge in liquid environments, highlighting the joint role of inertia and viscous resistance in the coalescence process., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

In this paper, we propose a driving waveform with a complex ramp pulse for an electrowetting display system. The relationship between the contact angle and viscosity of inks was calculated based on the fluid-motion characteristics of different viscosities. We obtained the suitable range of viscosity and voltage in the liquid-oil-solid three-phase contact display system. We carried out model simulation and driving waveform design. The result shows that the driving waveform improves the response speed and aperture ratio of electrowetting. The aperture ratio of electrowetting pixels is increased to 68.69%. This research is of great significance to optimizing the structure of fluid material and the design of driving waveforms in electrowetting displays.

The liver is a highly vascularized organ where fluid properties, including vascular pressure, vessel integrity and fluid viscosity, play a critical role in gross mechanical properties. To study the effects of portal pressure, liver confinement, fluid viscosity, and tissue crosslinking on liver stiffness, water diffusion, and vessel size, we applied multiparametric magnetic resonance imaging (mpMRI), including multifrequency magnetic resonance elastography (MRE) and apparent diffusion coefficient (ADC) measurements, to ex vivo livers from healthy male rats (13.6±1.6 weeks) at room temperature. Four scenarios including altered liver confinement, tissue crosslinking, and vascular fluid viscosity were investigated with mpMRI at different portal pressure levels (0-17.5 cmH 2 O). Our experiments demonstrated that, with increasing portal pressure, rat livers showed higher water content, water diffusivity, and increased vessel sizes quantified by the vessel tissue volume fraction (VTVF). These effects were most pronounced in native, unconfined livers (VTVF: 300±120%, p<0.05, ADC: 88±29%, p<0.01), while still significant under confinement (confined: VTVF: 53±32%, p<0.01, ADC: 28±19%, p<0.05; confined-fixed: VTVF: 52±20%, p<0.001, ADC: 11±2%, p<0.01; confined-viscous: VTVF: 210±110%, p<0.01, ADC: 26±9%, p<0.001). Softening with elevated portal pressure (-12±5, p<0.05) occurred regardless of confinement and fixation. However, the liver stiffened when exposed to a more viscous inflow fluid (11±4%, p<0.001). Taken together, our results elucidate the complex relationship between macroscopic-biophysical parameters of liver tissue measured by mpMRI and vascular-fluid properties. Influenced by portal pressure, vascular permeability, and matrix crosslinking, liver stiffness is sensitive to intrinsic poroelastic properties, which, alongside vascular architecture and water diffusivity, may aid in the differential diagnosis of liver disease. STATEMENT OF SIGNIFICANCE: Using highly controllable ex vivo rat liver phantoms, hepatic biophysical properties such as tissue-vascular structure, stiffness, and water diffusivity were investigated using multiparametric MRI including multifrequency magnetic resonance elastography (MRE) and diffusion-weighted imaging (DWI). Through elaborate tuning of the experimental conditions such as the static portal pressure, flow viscosity, amount and distribution of fluid content in the liver, we identified the contributions of the fluid component to the overall imaging-based biophysical properties of the liver. Our finding demonstrated the sensitivity of liver stiffness to the hepatic poroelastic properties, which may aid in the differential diagnosis of liver diseases., Competing Interests: Declaration of Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

A novel method called tip-viscid electrohydrodynamic jet printing (TVEJ), which produces a viscous needle tip jet, was presented to fabricate a 3D composite osteochondral scaffold with controllability of fiber size and space to promote cartilage regeneration. The tip-viscid process, by harnessing the combined effects of thermal, flow, and electric fields, was first systematically investigated by simulation analysis. The influences of process parameters on printing modes and resolutions were investigated to quantitatively guide the fabrication of various structures. 3D architectures with high aspect ratio and good interlaminar bonding were printed, thanks to the stable fine jet and its predictable viscosity. 3D composite osteochondral scaffolds with controllability of architectural features were fabricated, facilitating ingrowth of cells, and eventually inducing homogeneous cell proliferation. The scaffold's properties, which included chemical composition, wettability, and durability, were also investigated. Feasibility of the 3D scaffold for cartilage tissue regeneration was also proven by in vitro cellular activities.

Compound nanoparticle drug delivery system plays an important role in the interaction with lymph nodes. There are three primary types of lymphocytes: B cells, T cells, and natural killer cells. When the cells of the immune system turn carcinogenic, they assault body cells. The lymph fluid plays an important role in attacking healthy cells of the body; hence, this paper aimed to design a drug delivery system, which can efficiently direct nanoparticles to target the infected cells, helping in high-speed elimination of such cells. The proposed design depends on the interaction between these molecules, and the intelligent nano-controller has the ability to guide the nanoparticles by anaerobic contact. The proposed design proved that the smaller the nanoparticle size and density, the less dynamic viscosity of the liquid would be, which would reflect its resistance to flow. In addition, it was concluded that hydrogen molecules play a significant role in reducing lymphatic fluid resistance due to their low density.

Consuming thicker fluids and swallowing in the chin-tuck position has been shown to be advantageous for some patients with neurogenic dysphagia who aspirate due to various causes. The anatomical changes caused by these therapeutic techniques are well known, but it is unclear whether these changes alter the cerebral processing of swallow-related sensorimotor activity. We sought to investigate the effect of increased fluid viscosity and chin-down posture during swallowing on brain networks. 55 healthy adults performed water, nectar-thick, and honey thick liquid swallows in the neutral and chin-tuck positions while EEG signals were recorded. After pre-processing of the EEG timeseries, the time-frequency based synchrony measure was used for forming the brain networks to investigate whether there were differences among the brain networks between the swallowing of different fluid viscosities and swallowing in different head positions. We also investigated whether swallowing under various conditions exhibit small-world properties. Results showed that fluid viscosity affects the brain network in the Delta, Theta, Alpha, Beta, and Gamma frequency bands and that swallowing in the chin-tuck head position affects brain networks in the Alpha, Beta, and Gamma frequency bands. In addition, we showed that swallowing in all tested conditions exhibited small-world properties. Therefore, fluid viscosity and head positions should be considered in future swallowing EEG investigations., (Copyright © 2016 Elsevier B.V. All rights reserved.)

A numerical study on 2D natural convection in cylindrical cavities during the sterilization of liquid foods was performed. The mathematical model was established on momentum and energy balances and predicts both the heating dynamics of the slowest heating zone (SHZ) and the lethal rate achieved in homogeneous liquid canned foods. Two sophistication levels were proposed in viscosity modelling: 1) considering average viscosity and 2) using an Arrhenius-type model to include the effect of temperature on viscosity. The remaining thermodynamic properties were kept constant. The governing equations were spatially discretized via orthogonal collocation (OC) with mesh size of 25 × 25. Computational simulations were performed using proximate and thermodynamic data for carrot-orange soup, broccoli-cheddar soup, tomato puree, and cream-style corn. Flow patterns, isothermals, heating dynamics of the SHZ, and the sterilization rate achieved for the cases studied were compared for both viscosity models. The dynamics of coldest point and the lethal rate F0 in all food fluids studied were approximately equal in both cases, although the second sophistication level is closer to physical behavior. The model accuracy was compared favorably with reported sterilization time for cream-style corn packed at 303 × 406 can size, predicting 66 min versus an experimental time of 68 min at retort temperature of 121.1 ℃., (© The Author(s) 2016.)

Ultrasound and microbubble optimization studies for therapeutic applications are often conducted in water/saline, with a fluid viscosity of 1 cP. In an in vivo context, microbubbles are situated in blood, a more viscous fluid (∼4 cP). In this study, ultrahigh-speed microscopy and passive cavitation approaches were employed to investigate the effect of fluid viscosity on microbubble behavior at 1 MHz subject to high pressures (0.25-2 MPa). The propensity for individual microbubble (n = 220) fragmentation was found to significantly decrease in 4-cP fluid compared with 1-cP fluid, despite achieving similar maximum radial excursions. Microbubble populations diluted in 4-cP fluid exhibited decreased wideband emissions (up to 10.2 times), and increasingly distinct harmonic emission peaks (e.g., ultraharmonic) with increasing pressure, compared with those in 1-cP fluid. These results suggest that in vitro studies should consider an evaluation using physiologic viscosity perfusate before transitioning to in vivo evaluations., (Copyright © 2016 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.)

The rapid prediction of fluid viscosity, especially the fluid in heavy-oil petroleum reservoirs, is of great importance for oil exploration and transportation. We suggest a new method for rapid prediction of fluid viscosity using two-dimensional (2D) NMR relaxation time distributions. DEFIR, Driven-Equilibrium Fast-Inversion Recovery, a new pulse sequence for rapid measurement of 2D relaxation times, is proposed. The 2D relation between the ratio of transverse relaxation time to longitudinal relaxation time (T1/T2) and T1 distribution of fluid are obtained by means of DEFIR with only two one-dimensional measurements. The measurement speed of DEFIR pulse sequence over 2 times as fast as that of the traditional 2D method. Using Bloembergen theory, the relation between the distributions and fluid viscosity is found. Precise method for viscosity prediction is then established. Finally, we apply this method to a down-hole NMR fluid analysis system and realized on-site and on-line prediction of viscosity for formation fluids. The results demonstrated that the new method for viscosity prediction is efficient and accurate., (Copyright © 2014 Elsevier Inc. All rights reserved.)