Search

Carbon dots (CDs) represent an emerging class of nanomaterials that combine outstanding photoluminescent properties with low toxicity and excellent biocompatibility. These unique features have garnered significant interest for potential applications in sensing as well as nanovectors for bioactive compounds. Within this context, the possibility of synthesizing chiral carbon dots (CCDs) has paved the way for a plethora of bioapplications in their interaction with chiral biomolecules. In this study we report the synthesis and characterization of CCDs with opposite chiralities and their selective interaction with nucleic acids. A systematic study on their interaction with different oligonucleotides (ODNs) using UV-vis, photoluminescence, and circular dichroism analyses highlighted how the chiral surface of the CCDs induces distinct spectroscopic responses in CCDs-ODN conjugates. These findings establish the foundation for innovative applications of CCDs as nanosensors and nanocarriers for nucleic acids. Additionally, the antioxidant properties of CCDs were investigated, highlighting their dual potential as both sensing and preservative nanomaterials for genetic material. Our results suggest significant implications for the development of chiral-specific diagnostic tools, drug delivery systems, and therapeutic agents. Furthermore, these properties open new avenues for the use of CCDs in antibiotic residue detection, fluorescence imaging, and photodynamic therapy., (© 2024 The Author(s). Chemistry - A European Journal published by Wiley-VCH GmbH.)

Chikungunya virus (CHIKV) has emerged as a significant public health concern due to its rapid spread and potential for causing debilitating epidemics. In Argentina, the virus has garnered attention since its introduction to the Americas in 2013, due to its growing incidence and impact in neighbouring countries. Here we present a comprehensive analysis of the spatiotemporal dynamics of CHIKV in Argentina, focusing on the evolutionary trajectory of its genetic variants. Through a combination of active surveillance, screening of historical and recent samples, and whole-genome sequencing, we traced the evolutionary history of CHIKV lineages circulating within the country. Our results reveal that two distinct genotypes circulated in Argentina: The Asian lineage during the 2016 epidemic and the ECSA lineage in 2023. This distribution reflects the dominance of particular variants across Latin America. Since 2023, the ECSA lineage has led to a surge in cases throughout the Americas, marking a significant shift. The replacement of lineages in the American region constitutes a major epidemiological event, potentially affecting the dynamics of virus transmission and the clinical outcomes in impacted populations. The spatiotemporal analysis highlights CHIKV's distribution across Argentina and underscores the significant role of human mobility, especially when considering recent epidemics in neighbouring countries such as Paraguay and Uruguay, which have facilitated the spread and introduction of the viral strain into different districts. By integrating epidemiological data with genomic insights, we elucidate the patterns of virus dissemination, highlighting key areas of transmission and potential factors contributing to its spread.

Dry reforming of methane (DRM) is considered one of the most promising technologies for efficient greenhouse gas management thanks to the fact that through this reaction, it is possible to reduce CO 2 and CH 4 to obtain syngas, a mixture of H 2 and CO, with a suitable ratio for the Fischer-Tropsch production of long-chain hydrocarbons. Two other main processes can yield H 2 from CH 4 , i.e., Steam Reforming of Methane (SRM) and Partial Oxidation of Methane (POM), even though, not having CO 2 as a reagent, they are considered less green. Recently, scientists' challenge is to overcome the many drawbacks of DRM reactions, i.e., the use of precious metal-based catalysts, the high temperatures of the process, metal particle sintering and carbon deposition on the catalysts' surfaces. To overcome these issues, one proposed solution is to implement photo-thermal dry reforming of methane in which irradiation with light is used in combination with heating to improve the efficiency of the process. In this paper, we review the work of several groups aiming to investigate the pivotal promoting role of light radiation in DRM. Focus is also placed on the catalysts' design and the progress needed for bringing DRM to an industrial scale.

Chirality has a crucial effect on clinical, chemical and biological research since most bioactive compounds are chiral in the natural world. It is thus important to evaluate the enantiomeric ratio (or the enantiopurity) of the selected chiral analytes. To this purpose, fluorescence and electrochemical sensors, in which a chiral modifier is present, are reported in the literature. In this review, fluorescence and electrochemical sensors for enantiorecognition, in which chiral carbon dots (CDs) are used, are reported. Chiral CDs are a novel zero-dimensional carbon-based nanomaterial with a graphitic or amorphous carbon core and a chiral surface. They are nanoparticles with a high surface-to-volume ratio and good conductivity. Moreover, they have the advantages of good biocompatibility, multi-color emission, good conductivity and easy surface functionalization. Their exploitation in enantioselective sensing is the object of this review, in which several examples of fluorescent and electrochemical sensors, containing chiral CDs, are analyzed and discussed. A brief introduction to the most common synthetic procedures of chiral CDs is also reported, evidencing strengths and weaknesses. Finally, consideration concerning the potential challenges and future opportunities for the application of chiral CDs to the enantioselective sensing world are outlined.

In order to replace the expensive metal/ligand catalysts and classic toxic and volatile solvents, commonly used for the hydration of alkynes, the hydration reaction of alkynes was studied in the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMIm-BF 4 ) adding boron trifluoride diethyl etherate (BF 3 ·Et 2 O) as catalyst. Different ionic liquids were used, varying the cation or the anion, in order to identify the best one, in terms of both efficiency and reduced costs. The developed method was efficaciously applied to different alkynes, achieving the desired hydration products with good yields. The results obtained using a conventional approach (i.e., adding BF 3 ·Et 2 O) were compared with those achieved using BF 3 electrogenerated in BMIm-BF 4 , demonstrating the possibility of obtaining the products of alkyne hydration with analogous or improved yields, using less hazardous precursors to generate the reactive species in situ. In particular, for terminal arylalkynes, the electrochemical route proved to be advantageous, yielding preferentially the hydration products vs the aldol condensation products. Importantly, the ability to recycle the ionic liquid in subsequent reactions was successfully demonstrated., (Copyright © 2023, David et al.)

A simple and selective method for the determination of caffeine (CAF) and theophylline (THEO) has been developed for a glassy carbon electrode (GCE) modified with a composite including carbon dots (CDs) and chitosan (CS). To our knowledge, there are no previous studies that analyze a CDs-modified GCE for the presence of CAF and THEO. The electrochemical behavior of a GCE modified with a CDs-CS composite was studied in acidic medium by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Considering the sensor analytical parameters, the same linear concentrations range was found for CAF and THEO ranging from 1 × 10 -5 to 5 × 10 -3 mol L -1 with the same detection limit (LOD) of 1 × 10 -6 mol L -1 . The reproducibility and repeatability data were satisfactory in terms of RSD%. Moreover, the storage stability was evaluated, evidencing good results whatever the experimental conditions used. The developed sensor was applied for the simultaneous determination of CAF and THEO in tea and drug, and results were compared with those obtained with HPLC-ESI-MS in SIR mode as an independent method optimized on purpose. The electrochemical sensor presents the undoubled advantages in terms of cheapness, portability, and ease of use, since it does not require skilled personnel.

Carbon quantum dots (CDs) are "small" carbon nanostructures with excellent photoluminescence properties, together with low-toxicity, high biocompatibility, excellent dispersibility in water as well as organic solvents. Due to their characteristics, CDs have been studied for a plethora of applications as biosensors, luminescent probes for photodynamic and photothermal therapy, fluorescent inks and many more. Moreover, the possibility to obtain carbon dots from biomasses and/or organic waste has strongly promoted the interest in this class of carbon-based nanoparticles, having a promising impact in the view of circular economy and sustainable processes. Within this context, electrochemistry proved to be a green, practical, and efficient method for the synthesis of high-quality CDs, with the possibility to fine-tune their characteristics by changing operational parameters. This review outlines the principal and most recent advances in the electrochemical synthesis of CDs, focusing on the electrochemical set-up optimization., Competing Interests: The authors declare no conflict of interest., (© 2023 The Authors. ChemElectroChem published by Wiley-VCH GmbH.)

Background: Brewer's spent grain (BSG) is one of the main by-products of beer industry, little used because of its high moisture making it difficult to transport and store. Mainly used as animal feed and for energy production, the agro-industrial waste have recently attracted attention as source of bioactive compounds, with potential applications in many sectors as food, nutraceutical, pharmaceutical, cosmetic, food packaging. The present work focuses on BSG as potential source of valuable small-size bioactive compounds., Methods: Laboratory-made BSG was obtained by using four base malts for mashing. After drying, BSG was eco-friendly extracted with water and the extracts analyzed by untargeted ElectroSpray Ionization (ESI)-Mass Spectrometry (MS)/Mass Spectrometry (MS) (ESI-MS/MS) infusion experiments and by targeted High Performance Liquid Chromatography-PhotoDiodeArray-ElectroSpray Ionization-Mass Spectrometry (HPLC-PDA-ESI-MS) in Selected Ion Recording (SIR) mode analysis, to investigate the metabolic profile, the phenolic profile, the individual phenolic content, and tryptophan content. Aqueous extracts of malts and wort samples were also analyzed for a comparison. Data were statistically analyzed by ANOVA test. An explorative analysis based on Principal Component Analysis (PCA) was also carried out on malts, wort and threshes, in order to study correlation among samples and between samples and variables., Results: The untargeted ESI-MS/MS infusion experiments provided the mass spectral fingerprint of BSG, evidencing amino acids (γ-aminobutyric acid, proline, valine, threonine, leucine/isoleucine, lysine, histidine, phenylalanine and arginine) and organic and inorganic acids (pyruvic, lactic, phosphoric, valerianic, malonic, 2-furoic, malic, citric and gluconic acids), besides sugars. γ-Aminobutyric acid and lactic acid resulted predominant among the others. The targeted HPLC-PDA-ESI-MS in SIR mode analysis provided the phenolic profile of the polar fraction of BSG, evidenced tryptophan as the main residual metabolite in BSG (62.33-75.35 μg/g dry BSG), and catechin (1.13-4.24 μg/g dry BSG) as the representative phenolic antioxidant of not pre-treated BSG samples. The chemometric analysis of the individual compounds content in BSG, malt and wort evidenced similarities and differences among the samples., Conclusions: As main goal, the phytochemical characterization of BSG from base malts highlighted BSG as a potential source of small biomolecules, as tryptophan and catechin, besides γ-aminobutyric acid and lactic acid, opening to new perspectives of application for BSG. Strategies for their recovery are a future challenge. Moreover, ESI-MS/MS analysis was confirmed as a powerful tool for fast characterization of complex matrix. Last, results obtained by chemometric elaboration of data demonstrated the possibility to monitor a small number of molecules to ensure the quality of a final product., Competing Interests: The authors declare no conflict of interest., (© 2023 The Author(s). Published by IMR Press.)

Chirality is undoubtedly a fundamental property of nature since the different interactions of optically active molecules in a chiral environment are essential for numerous applications. Thus, in the field of asymmetric synthesis, the search for efficient, sustainable, cost-effective and recyclable chiral catalysts is still the main challenge in organic chemistry. The field of carbon dots (CDs) has experienced tremendous development in the last 15 years, including their applications as achiral catalysts. Thus, understanding the implications of chirality in CDs chemistry could be of utmost importance to achieving sustainable and biocompatible chiral nanocatalysts. An efficient and cost-effective electrochemical synthetic methodology for the synthesis of L-Proline-based chiral carbon dots (CCDs) and EtOH-derived L-Proline-based chiral carbon dots (CCDs) is herein reported. The electrochemical set-up and reaction conditions have been thoroughly optimised and their effects on CCDs size, photoluminescence, as well as catalytic activity have been investigated. The obtained CCDs have been successfully employed to catalyze an asymmetric aldol reaction, showing excellent results in terms of yield, diastereo- and enantioselectivity. Moreover, the sustainable nature of the CCDs was demonstrated by recycling the catalysts for up to 3 cycles without any loss of reactivity or stereoselectivity.

In this paper we present the first electrochemical generation of NHC carried out in a divided flow cell. The flow cell operated in the recycle mode. The need for a divided cell derived from the anodic electroactivity of the electrogenerated carbene. In order to have NHC accumulation in the catholyte, the Nafion membrane (cell separator) was pretreated with an alkaline solution. The formation of NHC was quantified as its reaction product with elemental sulfur. The NHC was successfully used as organocatalyst in two classical umpolung reactions of cinnamaldehyde: its cyclodimerization and its oxidative esterification., (Copyright © 2022, Rocco et al.)

Agropyron repens (L.) P. Beauv. (couch grass) is a world-wide infesting rhizomatous plant with pharmacological applications. Chemical research is focused on its allelopathic and anti-inflammatory components, which are mainly present in the essential oil. Conversely, the aqueous extracts have been sparingly investigated, although the herbal tea is by far the most used formulation. To fill the gap, the metabolic profile of Agropyron repens rhizome herbal tea was investigated by electrospray ionization (ESI) tandem-mass spectrometry (MS/MS); the phenolic profile was investigated by HPLC-PDA-ESI-MS/MS. ESI-MS fingerprinting was provided, evidencing diagnostic ions for saccharides, organic acids and amino acids. The HPLC-PDA-ESI-MS/MS analysis evidenced at least 20 characteristic phenolic compounds, the most representative being caffeoyl and feruloyl quinic esters, followed by coumaric, caffeic and ferulic acids, and hesperidin among flavonoids. In addition, the essential amino acid tryptophan was identified for the first time. The results suggest new perspectives of applications for Agropyron repens rhizome.

Imidazolium-based dicationic ionic liquids (DILs) are gaining considerable space in the field of organocatalysis mainly due to the opportunities in offering new possible applicable structural variations. In addition to the well-known variables which made the ionic liquids (ILs) famous as the type of cation and anion used, the nature of the molecular spacer moiety turns out a further possibility to improve some physicochemical properties, for example, solubility, acidity, electrochemical behavior, and so on. For this reason, this class of ionic liquids has been considered as possible competitors to their corresponding monocationic salts in replacing common catalysts in organic synthesis, particularly in cases in which their bidentate nature could positively affect the catalytic activity. This mini-review is intended to highlight the progress carried out in the last six years in the field of organocatalysis, including DILs as such and as hybrids with polymers, nanomaterials, and composites.

The anodic oxidation of 1-butyl-3-methylimidazolium tetrafluoroborate (BMIm-BF 4 ) efficiently generates BF 3 from BF 4 - . This Lewis acid, strongly bound to the ionic liquids, can be efficiently used in classical BF 3 -catalyzed reactions. We demonstrated the BF 3 /BMIm-BF 4 reactivity in four reactions, namely, a domino Friedel-Crafts/lactonization of phenols, the Povarov reaction, the Friedel-Crafts benzylation of anisole, and the multicomponent synthesis of tetrahydro-11 H -benzo[ a ]xanthen-11-ones. In comparison with literature data using BF 3 -Et 2 O in organic solvents, in all the presented cases, analogous or improved results were obtained. Moreover, the noteworthy advantages of the developed method are the in situ generation of BF 3 (no storing necessity) in the required amount, using only the electron as redox reagent, and the recycling of BMIm-BF 4 for multiple subsequent runs.

In the last twenty years, N-heterocyclic carbenes (NHCs) have been extensively studied for their application as organocatalysts in stereoselective synthesis as well as ligands for transition metals-promoted synthetic methodologies. Derived mainly from azolium salts, NHCs have demonstrated exceptional versatility in their generation usually performed by deprotonation or reduction (chemical or electrochemical). In particular, the generation of NHC under electrochemical conditions, starting from azolium-based ionic liquids, has proven to be a successful green approach and demonstrated wide applicability in organic synthesis. In this Personal Account, the application of electrogenerated NHCs in organic synthesis will be discussed, with a particular attention to the different reactivity in ionic liquids compared to classical organic solvents., (© 2021 The Chemical Society of Japan & Wiley-VCH GmbH.)

Candida albicans, in specific conditions, is responsible of severe invasive systemic candidiasis that are related to its ability to produce biofilm on biological and artificial surfaces. Many studies reported the role of iron in fungal growth and virulence and the ability of metal chelating agents to interfere with C. albicans metabolism, virulence and biofilm formation. Here we report the activity of 3-hydroxy-1,2-dimethyl-4(1H)-pyridinone (deferiprone) derivatives against C. albicans planktonic cells and biofilm. Some of the studied compounds (2b and 3b) were able to chelate Fe(III) and Cu(II), and showed an interesting activity on planktonic cells (MIC 50 of 32 μg/mL and 16 μg/mL respectively) and on biofilm formation (BMIC 50 of 32 μg/mL and 16 μg/mL respectively) in cultured ATCC 10,231C. albicans; this activity was reduced, in a concentration dependent way, by the addition of Fe(III) and Cu(II) to the culture media. Furthermore, the most active compound 3b showed a low toxicity on Galleria mellonella larvae., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

In order to obtain multi-functional molecules for Alzheimer's disease, a series of deferiprone derivatives has been synthesized and evaluated in vitro with the hypothesis that they can restore the cholinergic tone and attenuate the dyshomeostasis of the metals mainly involved in the pathology. These compounds were designed as dual binding site AChE inhibitors: they possess an arylalkylamine moiety connected via an alkyl chain to a 3-hydroxy-4-pyridone fragment, to allow the simultaneous interaction with catalytic active site (CAS) and peripheral anionic site (PAS) of the enzyme. Deferiprone moiety and 2-aminopyridine, 2-aminopyrimidine or 2,4-diaminopyrimidine groups have been incorporated into these compounds, in order to obtain molecules potentially able to chelate bio-metals colocalized in Aβ plaques and involved in the generation of radical species. Synthesized compounds were tested by enzymatic inhibition studies towards EeAChE and eqBChE using Ellman's method. The most potent EeAChE inhibitor is compound 5a, with a K i of 788 ± 51 nM, while the most potent eqBChE inhibitors are compounds 12 and 19, with K i values of 182 ± 18 nM and 258 ± 25 nM respectively. Selected compounds, among the most potent cholinesterases inhibitors, were able to form complex with iron and in some cases with copper and zinc. Moreover, these compounds were characterized by low toxicity on U-87 MG Cell Line from human brain (glioblastoma astrocytoma)., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020. Published by Elsevier Masson SAS.)

The cathodic reduction of acetonitrile solutions containing a tetraalkylammonium salt leads to the formation of the cyanomethyl anion ( - CH 2 CN, cyanomethanide). This electrolysis can be carried out under very simple experimental conditions (constant-current electrolyses), using various cathodic materials, controlling the amount of base by simply controlling the amount of charge. Despite the fact that the mechanism for this electrochemical reaction is still debated (and it depends on the cathodic material), the outcome of the electrolysis is the formation of a strong base, - CH 2 CN (p K a 31.3 for acetonitrile in DMSO). The chemical behavior of this electrogenerated base (EGB) strongly depends on its counterion, which in this case is a tetraalkylammonium cation, with a low charge density and thus not coordinated. The very weak interaction between R 4 N + and - CH 2 CN renders the cyanomethyl anion a "naked" ion, and thus highly reactive. In particular, the cyanomethyl anion can react as a base and as a nucleophile. In the first case, it behaves as a strong base and, after deprotonation of a weak acidic substrate, transforms itself into a solvent molecule, acetonitrile, thus generating no byproducts. In the second case, the reactivity as a nucleophile of the cyanomethyl anion obviously depends on the reaction partner. When an electrophile is present in the reaction mixture, a cyanomethylation is obtained (e.g., with aromatic aldehydes, possessing no acidic hydrogen atoms, which undergo nucleophilic attack on the carbonyl carbon atom by - CH 2 CN); on the contrary, when no reagent is present other than acetonitrile and tetraalkylammonium salt, an attack on the parent molecule leads to the acetonitrile dimer, 3-aminocrotononitrile, which in turn can behave as a base and/or as a nucleophile. In this regard, some authors report that it is preferable to carry out the electrogeneration of the cyanomethyl anion under different experimental conditions, i.e., using an undivided cell and a sacrificial magnesium anode. In this way, a Grignard-type reagent is formed (Mg(CH 2 CN) 2 ) which highly stabilizes the cyanomethyl anion, preventing its dimerization. It should be noted that in our laboratory the electrogenerated tetraalkylammonium cyanomethanide was extensively used in various reactions (both acid-base and nucleophile-electrophile, vide infra ), and in almost no case, the amount of acetonitrile dimer formed exceeded 5%, confirming the validity of this electrochemical methodology to generate a very efficient base. Moreover, when in the reaction mixture both a weak acid and an electrophile are present, the prevalent reactivity of the cyanomethyl anion is as a base, leaving the possibility of a cyanomethylation reaction to those cases in which no acidic substrate is present. We have successfully used the electrogenerated cyanomethyl anion in many base-induced reactions, as the synthesis of the β-lactam ring (chiral or not), the insertion of carbon dioxide into amines and amino alcohols, the activation of elemental sulfur and insertion into carbonyl compounds, the selective alkylation of difunctional compounds, etc.

The importance of Zika virus (ZIKV) has increased noticeably since the outbreak in the Americas in 2015, when the illness was associated with congenital disorders. Although there is evidence of sexual transmission of the virus, the mosquito Aedes aegypti is believed to be the main vector for transmission to humans. This species of mosquito has not only been found naturally infected with ZIKV, but also has been the subject of study in many vector competence assays that employ different strains of ZIKV around the world. In Argentina, the first case was reported in February 2016 and a total of 278 autochthonous cases have since been confirmed, however, ZIKV virus has not been isolated from any mosquito species yet in Argentina. In order to elucidate if Argentinian Ae. aegypti populations could be a possible vector of ZIKV, we conducted vector competence studies that involved a local strain of ZIKV from Chaco province, and a Venezuelan strain obtained from an imported case. For this purpose, Ae. aegypti adults from the temperate area of Argentina (Buenos Aires province) were fed with infected blood. Body, legs and saliva were harvested and tested by plaque titration on plates of Vero cells for ZIKV at 7, 11 and 14 days post infection (DPI) in order to calculate infection, transmission, and dissemination rates, respectively. Both strains were able to infect mosquitoes at all DPIs, whereas dissemination and transmission were observed at all DPIs for the Argentinian strain but only at 14 DPI for the Venezuelan strain. This study proves the ability of Ae. aegypti mosquitoes from Argentina to become infected with two different strains of ZIKV, both belonging to the Asian lineage, and that the virus can disseminate to the legs and salivary glands., Competing Interests: The authors have declared that no competing interests exist.

Ionic liquids (ILs) are considered in the majority of cases green solvents, due to their virtually null vapor pressure and to the easiness in recycling them. In particular, imidazolium ILs are widely used in many fields of Chemistry, as solvents or precursors of N-heterocyclic carbenes (NHCs). The latter are easily obtained by deprotonation of the C2-H, usually using strong bases or cathodic reduction. Nevertheless, it is known that weaker bases (e.g., triethylamine) are able to promote C2-H/D exchange. From this perspective, the possibility of deprotonating C2-H group of an imidazolium cation by means of a basic counter-ion was seriously considered and led to the synthesis of imidazolium ILs spontaneously containing NHCs. The most famous of this class of ILs are N,N'-disubstituted imidazolium acetates. Due to the particular reactivity of this kind of ILs, they were appointed as "organocatalytic ionic liquids" or "proto-carbenes." Many papers report the use of these imidazolium acetates in organocatalytic reactions (i. e., catalyzed by NHC) or in stoichiometric NHC reactions (e.g., with elemental sulfur to yield the corresponding imidazole-2-thiones). Nevertheless, the actual presence of NHC in N,N'-disubstituted imidazolium acetate is still controversial. Moreover, theoretical studies seem to rule out the presence of NHC in such a polar environment as an IL. Aim of this Mini Review is to give the reader an up-to-date overview on the actual or potential presence of NHC in such an "organocatalytic ionic liquid," both from the experimental and theoretical point of view, without the intent to be exhaustive on N,N'-disubstituted imidazolium acetate applications.

The electrochemical reduction of 2-(2,2-dibromovinyl)naphthalene in a DMF solution (Pt cathode) yields selectively 2-ethynylnaphthalene or 2-(bromoethynyl)naphthalene in high yields, depending on the electrolysis conditions. In particular, by simply changing the working potential and the supporting electrolyte, the reaction can be directed towards the synthesis of the terminal alkyne (Et 4 NBF 4 ) or the bromoalkyne (NaClO 4 ). This study allowed to establish that 2-(bromoethynyl)naphthalene can be converted into 2-ethynylnaphthalene by cathodic reduction.

The present work aimed to synthesise promising antioxidant compounds as a valuable alternative to the currently expensive and easily degradable molecules that are employed as stabilizers in industrial preparation. Taking into account our experience concerning domino Friedel-Crafts/lactonization reactions, we successfully improved and extended the previously reported methodology toward the synthesis of 3,3-disubstituted-3 H -benzofuran-2-one derivatives 9 - 20 starting from polyphenols 1 - 6 as substrates and either diethylketomalonate ( 7 ) or 3,3,3-trifluoromethyl pyruvate ( 8 ) as electrophilic counterpart. The antioxidant capacity of the most stable compounds ( 9 - 11 and 15 - 20 ) was evaluated by both DPPH assay and Cyclic Voltammetry analyses performed in alcoholic media (methanol) as well as in aprotic solvent (acetonitrile). By comparing the recorded experimental data, a remarkable activity can be attributed to few of the tested lactones., Competing Interests: The authors declare no conflict of interest.

The synthesis and the characterization of three new naproxen decorated polymers are described. A versatile and general approach is employed to link the drug to polymers, affording the derivatives with a very high degree of purity. The release of the drug from the conjugates proved to be exceptionally slow, even in acidic aqueous media, and the kinetic of the process seems to be triggered by their solubility in water. On the other hand, the interesting outcome of the first ex vivo drug release experiments on human blood samples makes this preliminary study valuable for future investigations on the use of these polymeric prodrugs in in vivo treatment of inflammatory states.

A series of N,N-dimethylcarbamates containing a N,N-dibenzylamino moiety was synthesized and tested to evaluate their ability to inhibit Acetylcholinesterase (AChE). The most active compounds 4 and 8, showed 85 and 69% of inhibition at 50 μM, respectively. Furthermore, some basic SAR rules were outlined: an alkyl linker of six methylene units is the best spacer between the carbamoyl and dibenzylamino moieties; electron-withdrawal substituents on aromatics rings of the dibenzylamino group reduce the inhibitory power. Compound 4 produces a slow onset inhibition of AChE and this is not due to the carbamoylation of the enzyme, as demonstrated by the time-dependent inhibition assay of AChE with compound 4 and by MALDI-TOF MS analysis of trypsinized AChE inhibited by compound 4. Instead, compound 4 could act as a slow-binding inhibitor of AChE, probably because of its high conformational freedom due to the linear alkyl chain.

The use of electrogenerated acetonitrile anion allows the alkylation of N-Boc-4-aminopyridine in very high yields, under mild conditions and without by-products. The high reactivity of this base is due to its large tetraethylammonium counterion, which leaves the acetonitrile anion "naked." The deprotection of the obtained compounds led to high yields in N-alkylated 4-aminopyridines. Nonsymmetrically dialkylated 4-aminopyridines were obtained by subsequent reaction of monoalkylated ones with t-BuOK and alkyl halides, while symmetrically dialkylated 4-aminopyridines were obtained by direct reaction of 4-aminopyridine with an excess of t-BuOK and alkyl halides. Some mono- and dialkyl-4-aminopyridines were selected to evaluate antifungal and antiprotozoal activity; the dialkylated 4-aminopyridines 3ac, 3ae and 3ff showed antifungal towards Cryptococcus neoformans; whereas 3cc, 3ee and 3ff showed antiprotozoal activity towards Leishmania infantum and Plasmodium falciparum.

Pharmacophoric mapping is a useful procedure to frame, especially when crystallographic receptor structures are unavailable as in ligand-based studies, the hypothetical site of interaction. In this study, 71 pyrrole derivatives active against M. tuberculosis were used to derive through a recent new 3-D QSAR protocol, 3-D QSAutogrid/R, several predictive 3-D QSAR models on compounds aligned by a previously reported pharmacophoric application. A final multiprobe (MP) 3-D QSAR model was then obtained configuring itself as a tool to derive pharmacophoric quantitative models. To stress the applicability of the described models, an external test set of unrelated and newly synthesized series of R-4-amino-3-isoxazolidinone derivatives found to be active at micromolar level against M. tuberculosis was used, and the predicted bioactivities were in good agreement with the experimental values. The 3-D QSAutogrid/R procedure proved to be able to correlate by a single multi-informative scenario the different activity molecular profiles thus confirming its usefulness in the rational drug design approach.

The umpolung reaction of α,β-unsaturated aldehydes to saturated esters has been carried out in an ionic liquid by organocatalysis of electrogenerated NHC. The roles of solvent, precatalyst and proton donor of the ionic liquid have been verified and good to high yields of esters have been obtained using a "green" and mild methodology., (This journal is © The Royal Society of Chemistry 2012)

The well-known Crab Nebula is at the center of the SN1054 supernova remnant. It consists of a rotationally powered pulsar interacting with a surrounding nebula through a relativistic particle wind. The emissions originating from the pulsar and nebula have been considered to be essentially stable. Here, we report the detection of strong gamma-ray (100 mega-electron volts to 10 giga-electron volts) flares observed by the AGILE satellite in September 2010 and October 2007. In both cases, the total gamma-ray flux increased by a factor of three compared with the non-flaring flux. The flare luminosity and short time scale favor an origin near the pulsar, and we discuss Chandra Observatory x-ray and Hubble Space Telescope optical follow-up observations of the nebula. Our observations challenge standard models of nebular emission and require power-law acceleration by shock-driven plasma wave turbulence within an approximately 1-day time scale.

Strong electric discharges associated with thunderstorms can produce terrestrial gamma-ray flashes (TGFs), i.e., intense bursts of x rays and γ rays lasting a few milliseconds or less. We present in this Letter new TGF timing and spectral data based on the observations of the Italian Space Agency AGILE satellite. We determine that the TGF emission above 10 MeV has a significant power-law spectral component reaching energies up to 100 MeV. These results challenge TGF theoretical models based on runaway electron acceleration. The TGF discharge electric field accelerates particles over the large distances for which maximal voltages of hundreds of megavolts can be established. The combination of huge potentials and large electric fields in TGFs can efficiently accelerate particles in large numbers, and we reconsider here the photon spectrum and the neutron production by photonuclear reactions in the atmosphere.

Terrestrial gamma-ray flashes (TGFs) are very short bursts of high-energy photons and electrons originating in Earth's atmosphere. We present here a localization study of TGFs carried out at gamma-ray energies above 20 MeV based on an innovative event selection method. We use the AGILE satellite Silicon Tracker data that for the first time have been correlated with TGFs detected by the AGILE Mini-Calorimeter. We detect 8 TGFs with gamma-ray photons of energies above 20 MeV localized by the AGILE gamma-ray imager with an accuracy of ∼5-10° at 50 MeV. Remarkably, all TGF-associated gamma rays are compatible with a terrestrial production site closer to the subsatellite point than 400 km. Considering that our gamma rays reach the AGILE satellite at 540 km altitude with limited scattering or attenuation, our measurements provide the first precise direct localization of TGFs from space.

Electrogenerated N-heterocyclic carbene can behave as an organocatalyst in the Staudinger reaction (from imine and acyl chloride) in a very polar solvent, such as an ionic liquid.

Pulsars are known to power winds of relativistic particles that can produce bright nebulae by interacting with the surrounding medium. These pulsar wind nebulae are observed by their radio, optical, and x-ray emissions, and in some cases also at TeV (teraelectron volt) energies, but the lack of information in the gamma-ray band precludes drawing a comprehensive multiwavelength picture of their phenomenology and emission mechanisms. Using data from the AGILE satellite, we detected the Vela pulsar wind nebula in the energy range from 100 MeV to 3 GeV. This result constrains the particle population responsible for the GeV emission and establishes a class of gamma-ray emitters that could account for a fraction of the unidentified galactic gamma-ray sources.

Super-massive black holes in active galaxies can accelerate particles to relativistic energies, producing jets with associated gamma-ray emission. Galactic 'microquasars', which are binary systems consisting of a neutron star or stellar-mass black hole accreting gas from a companion star, also produce relativistic jets, generally together with radio flares. Apart from an isolated event detected in Cygnus X-1, there has hitherto been no systematic evidence for the acceleration of particles to gigaelectronvolt or higher energies in a microquasar, with the consequence that we are as yet unsure about the mechanism of jet energization. Here we report four gamma-ray flares with energies above 100 MeV from the microquasar Cygnus X-3 (an exceptional X-ray binary that sporadically produces radio jets). There is a clear pattern of temporal correlations between the gamma-ray flares and transitional spectral states of the radio-frequency and X-ray emission. Particle acceleration occurred a few days before radio-jet ejections for two of the four flares, meaning that the process of jet formation implies the production of very energetic particles. In Cygnus X-3, particle energies during the flares can be thousands of times higher than during quiescent states.

A new electrochemical procedure for the synthesis of organic carbamates from amines and carbon dioxide has been developed using selective cathodic reduction of carbon dioxide in CO2-saturated room-temperature ionic liquid BMIm-BF4 solutions containing amines 1a-j, followed by addition of EtI as an alkylating agent. The synthesis was carried out under mild (PCO2 = 1.0 atm, t = 55 degrees C) and safe conditions, and the use of volatile and toxic solvents and catalysts (according to the growing demand for ecofriendly synthetic methodologies), as well as of any supporting electrolyte (for a very easy workup of the reaction mixture), was avoided. Carbamates 2a-j were isolated in good to high yields.

[reaction: see text] An efficient electrochemical synthesis of 5-methylene-1,3-oxazolidin-2-ones (2a-h) from acetylenic amines (1a-h) and carbon dioxide has been achieved by direct electrolysis of solution of MeCN and Et4NPF6 containing the amine, with subsequent CO2 bubbling and heating. The yields vary from good to excellent, the conditions are mild, and the use of toxic and harmful chemicals and catalysts is avoided.

Chiral 2-phenyl succinic ester derivatives have been obtained under mild conditions, in short times and with satisfactory yields by electrochemical reduction of chiral cinnamic acid derivatives under a CO2 atmosphere. When 4R-(diphenylmethyl)-oxazolidin-2-one was used as a chiral auxiliary the two diastereoisomers could be easily separated by flash chromatography and the R-isomer was obtained as major product.

A new strategy based on the catalytic release of the supporting electrolyte agent in the electrolysis medium proved to be effective for the direct electroactivation of suitable C-H acid-containing compounds vs. catalytic addition processes, under solvent-free conditions.

The diastereoselective electrochemical carboxylation of chiral N-(2-bromoacyl)oxazolidin-2-ones has been studied. This reaction was carried out by cathodic reduction of the C-Br bond, in the presence of carbon dioxide, followed by treatment with diazomethane. The yields and the diastereomeric ratio of the two epimeric alkylmalonic acid derivatives are strongly affected by various factors: solvent-supporting electrolyte system, temperature, electrode material, electrolysis conditions, oxazolidinone moiety. The higher yields (88%) were obtained starting from N-(2-bromopropionyl)-4R-phenyloxazolidin-2-one 1a, but with poor diastereoselectivity (61:39). The two epimers were easily separated by flash chromatography. The best results were achieved using a different chiral auxiliary: Oppolzer's camphor sultam. Starting from 1j a good yield in carboxylated product was obtained (80%) with excellent diastereoselectivity (98:2). These chiral alkylmalonic acid derivatives are valuable building blocks in the synthesis of molecules with biological activity and of chiral propane-1,3-diols derivatives.

A novel efficient synthesis of N,N'-disubstituted ureas has been developed. Aromatic and aliphatic primary amines undergo oxidative carbonylation under atmospheric pressure of carbon monoxide using Pd(II) catalyst in combination with its anodic recycling at a graphite electrode.

A new carboxylating reagent ((-)CH(2)CN/CO(2)) was obtained by bubbling CO(2) in a CH(3)CN-TEAP (tetraethylammonium perchlorate) solution previously electrolyzed under galvanostatic control. Organic carbamates were isolated from these solutions after addition of amines and an alkylating agent. In this paper, we describe the optimized conditions for the electrochemical synthesis of carbamates from amines and CO(2), in mild and safe conditions, without any addition of bases, probases, or catalysts. Carbamates were isolated from primary and secondary aliphatic amines in high to excellent yields and from aromatic amines in moderate yields (dependent on the nucleophilicity of the nitrogen atom).

A safe and mild procedure for the synthesis of mixed organic carbonates is described. Reaction of commercially available tetrabutylammonium methoxide and ethoxide with carbon dioxide yields the corresponding methyl and ethyl tetrabutylammonium carbonates (TBAMC and TBAEC). The reactions of these new compounds with several different alkyl halides give methyl and ethyl carbonates in high yields. The use of classic toxic and harmful chemicals such as phosgene and carbon monoxide is avoided.

[reaction: see text] Electrochemical carboxylation of N-(2-bromopropionyl)-4R-phenyloxazolidin-2-one aimed at the synthesis and chiral resolution of unsymmetrical methylmalonic ester derivatives is described. The presence of the Evans' chiral auxiliary permits an easy resolution of the mixture of the two diastereoisomers.

An improved and efficient electrochemical N-acylation of chiral oxazolidin-2-ones has been achieved. The generation of the nitrogen anion is obtained under mild conditions and without addition of base or probase, by direct electrolysis of a solution of MeCN-TEAP containing the oxazolidinone. Acylation agents (acid chlorides or anhydrides) were added at the end of the electrolysis. N-Acylated products were isolated in high to excellent yields.

We report the discovery of a transient equivalent hydrogen column density with an absorption edge at approximately 3.8 kiloelectron volts in the spectrum of the prompt x-ray emission of gamma-ray burst (GRB) 990705. This feature can be satisfactorily modeled with a photoelectric absorption by a medium located at a redshift of approximately 0.86 and with an iron abundance of approximately 75 times the solar one. The transient behavior is attributed to the strong ionization produced in the circumburst medium by the GRB photons. The high iron abundance points to the existence of a burst environment enriched by a supernova along the line of sight. The supernova explosion is estimated to have occurred about 10 years before the burst. Our results agree with models in which GRBs originate from the collapse of very massive stars and are preceded by a supernova event.

We report on the discovery of two emission features observed in the x-ray spectrum of the afterglow of the gamma-ray burst (GRB) of 16 December 1999 by the Chandra X-ray Observatory. These features are identified with the Ly(alpha) line and the narrow recombination continuum by hydrogenic ions of iron at a redshift z = 1.00 +/- 0.02, providing an unambiguous measurement of the distance of a GRB. Line width and intensity imply that the progenitor of the GRB was a massive star system that ejected, before the GRB event, a quantity of iron approximately 0.01 of the mass of the sun at a velocity approximately 0.1 of the speed of light, probably by a supernova explosion.

Broad-band (ultraviolet to near-infrared) observations of the intense gamma ray burst GRB 990123 started approximately 8.5 hours after the event and continued until 18 February 1999. When combined with other data, in particular from the Robotic Telescope and Transient Source Experiment (ROTSE) and the Hubble Space Telescope (HST), evidence emerges for a smoothly declining light curve, suggesting some color dependence that could be related to a cooling break passing the ultraviolet-optical band at about 1 day after the high-energy event. The steeper decline rate seen after 1.5 to 2 days may be evidence for a collimated jet pointing toward the observer.

An optical transient within the error box of the gamma ray burst GRB 970508 was imaged 4 hours after the event. It displayed a strong ultraviolet excess, and reached maximum brightness 2 days later. The optical spectra did not show any emission lines, and no variations on time scales of minutes were observed for 1 hour during the decline phase. According to the fireball and afterglow models, the intensity should rise monotonically before the observed optical maximum, but the data indicate that another physical mechanism may be responsible for the constant phase seen during the first hours after the burst.