Search

Bone tissue engineering has emerged as a pivotal field addressing the critical clinical needs of bone fractures. This study focused on developing multi-composite hydrogels by synergizing biocompatible GelMA macromolecules with synthetic PEGDA and reinforcing them with nanosilicates (SN). The incorporation of SN introduces crucial trace elements such as silicon, magnesium, and lithium, promoting both angiogenesis and osteogenesis. Characterizations revealed that PEGDA significantly reinforced the composite hydrogels' stability, while SN further enhanced the mechanical integrity of the GelMA-PEGDA-SN (GPS) hydrogels. Cell studies designated that GPS improved cell proliferation and migration, angiogenic VEGF/eNOS expression and osteogenic differentiation. In vivo experiments showed that GPS hydrogels effectively enhanced calvarial bone healing, with the GPS-2 formulation (2 % SN) displaying superior bone coverage and increased vascular formation. Assessments of osteogenic formation and the angiogenic marker CD31 validated the comprehensive bone regeneration potential of GPS hydrogels. These findings highlight the significant promise of GPS hydrogels in fostering bone healing with promoted angiogenesis., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2024. Published by Elsevier B.V.)

Intermittent delivery of parathyroid hormone (PTH) could effectively promote bone regeneration, but the need for daily injection administration has limited its further clinical applications. Exposure to magnetic stimulation could regulate cell fate to promote osteogenesis. Herein, we developed a magnetized hydrogel with programmed PTH release and simultaneous magnetic actuation to promote osteogenic commitment. Ag dual-cross-linked hydrogel was formulated as GelMA - PVA (GP) biphasic reservoir with magnetic nanoparticles (GPM) and PTH (GPMP). Macroscopic and microscopic characterizations were performed to optimize the formulations. In vitro release assessment confirmed the programmable release of PTH with a pulsatile profile primed via magnetization in the first 4 days and a sustained release, controlled by an optimized GP matrix, for over a month. Stimulated by an alternating magnetic field, the hydrogels displayed a zigzag-shaped pulsatile release profile, and the cumulative release was enhanced by 8, 28, and 18% in In40, Ab40, and In20Ab20 (loading 40 μg PTH via incorporation, absorption, and their combination) formulations, respectively, compared with the same formulations without magnetic stimulation. An in vitro cytocompatibility test showed that all formulations were biocompatible and that PTH addition significantly promoted the proliferation of MC3T3-E1 pre-osteoblasts. In vivo studies presented enhanced new bone regeneration with significantly improved bone volume and bone mineral density in GPM and GPMP groups (increased by 120 and 251% compared with those of non-treated control), confirming their osteogenic effects and accelerated bone healing. This newly developed GPMP sample provides simultaneous osteogenesis effects via the programmed release of PTH and magnetically promoted bone regeneration and is promising in the facilitation of bone healing and treatment of various delayed/non-union conditions without the burden of daily injection.

Bioprinting is an emerging technology involved in the fabrication of three-dimensional tissue constructs for the repair and regeneration of various tissues and organs. Collagen, a natural protein found abundantly in the extracellular matrix of several tissues, can be extracted from collagen-rich tissues of animals such as sheep, cows, rats, pigs, horses, birds, and marine animals. However, due to the poor printability of collagen bioinks, biocompatible collagen scaffolds that mimic the extracellular matrix (ECM) are difficult to fabricate using bioprinting techniques. Gelatin methacrylate (GelMA), a semi-synthetic polymer with tunable physical and chemical properties, has been found to be a promising biomaterial in various bioprinting applications. The printability of collagen can be improved by combining it with semi-synthetic polymers such as GelMA to develop hybrid hydrogels. Such hybrid hydrogels printed have also been identified to have enhanced mechanical properties. Hybrid GelMA meshes have not previously been prepared with collagen from ovine sources. This study provides a novel comparison between the properties of hybrid meshes with ovine skin and bovine hide collagen. GelMA (8% w/v ) was integrated with three different concentrations (0.5%, 1%, and 2%) of bovine and ovine collagen forming hybrid hydrogels inks that were printed into meshes with enhanced properties. The maximum percentage of collagen suitable for integration with GelMA, forming hybrid hydrogels with a stable degradation rate was 1%. The water-soluble nature of ovine collagen promoted faster degradation of the hybrid meshes, although the structural crosslinking was identified to be higher than bovine hybrid meshes. The 1% bovine collagen hybrid meshes stood out in terms of their stable degradation rates.

Antioxidants interact with free radicals, terminating the adverse chain reactions and converting them to harmless products. Antioxidants thus minimize the oxidative stress and play a crucial role in the treatment of free radicals-induced diseases. However, the effectiveness of natural and/or synthetic antioxidants is limited due to their poor absorption, difficulties to cross the cell membranes, and degradation during delivery, hence contributing to their limited bioavailability. To address these issues, antioxidants covalently linked with nanoparticles, entrapped in nanogel, hollow particles, or encapsulated into nanoparticles of diverse origin have been used to provide better stability, gradual and sustained release, biocompatibility, and targeted delivery of the antioxidants with superior antioxidant profiles. This review aims to critically evaluate the recent scientific evaluations of nanoparticles as the antioxidant delivery vehicles, as well as their contribution in efficient and enhanced antioxidant activities.

A chitosan-pectin (CS-PEC) biopolymeric hydrogel wound dressing was investigated for lidocaine delivery. Here we demonstrate for the first time the feasibility of three-dimensional (3D) printed CS-PEC hydrogel incorporating the local anaesthetic drug lidocaine hydrochloride (LDC) as a potential wound dressing candidate. The hydrogels were prepared by physical crosslinking of CS and PEC polysaccharides. The scaffolds were printed using an extrusion-based 3D printer using a mechanical positive displacement dispensing system followed by lyophilisation. The 3D printed hydrogels showed good printability, dimensional integrity and self-adhesion to skin. The high swelling ratio and water absorption of 3D printed hydrogels indicated suitability for absorbing exudates and maintaining a moist wound healing environment. Fourier transform infrared (FTIR) spectroscopy results indicated that the CS-PEC hydrogel was formed by hydrogen bonds. Incorporation of LDC in the hydrogel did not interfere with its functional stability. In vitro drug release studies of LDC over 6 h fitted the Korsmeyer-Peppas model. This work demonstrates the possibility of a 3D printed hydrogel as a suitable candidate for wound dressings., (Copyright © 2019 Elsevier B.V. All rights reserved.)

This study reports on the fabrication of a controlled release system for the delivery of levonorgestrel (LNG) for long-term contraception. LNG was encapsulated in chemically cross-linked chitosan (CS) microspheres, and microspheres presented a spherical geometry with a good particle size distribution (polydispersity index (PDI) < 0.1). The LNG-CS microspheres were classified based on their particle size range, <63, 63-125, and 125-300 μm, where the 125-300 μm particles were selected to be incorporated into a physically cross-linked and annealed PVA hydrogel matrix to prolong the drug release. PVA concentrations and the annealing treatment influenced the swelling behavior of PVA hydrogels. Fourier transform infrared (FTIR) spectroscopy indicated that CS was successfully cross-linked through the formation of a Schiff base; the PVA hydrogel was formed through hydrogen bonding without reacting with LNG, which was only physically entrapped, thus maintaining its stability. Differential scanning calorimetry (DSC) showed that freeze-thaw and annealing processes increased the degree of crystallinity in the PVA hydrogel. In vitro drug release assessments for all formulations showed zero order without any burst release. Over a period of 100 days, 34, 27, and 21% of LNG was released from the CS-LNG microspheres in the size ranges < 63, 63-125, and 125-300 μm, respectively, while only 14, 11, and 9% of LNG was released when the CS-LNG microspheres were incorporated into 10, 15, and 20% PVA hydrogels, respectively. The drug release kinetics exhibited both diffusion- and swelling-controlled mechanisms following the Korsmeyer-Peppas model. This work presents a promising delivery system for long-term contraception with controlled zero-order release behaviors.