Search

This work proposes a novel transparent solar cooker design, and its performance is evaluated using a set of experiments. The cooker is fabricated from transparent and non-transparent, and lightweight material. The study was conducted at the Renewable energy laboratory in India (MNNIT Prayagraj). For thermal performance assessment of Box-type standard solar cooker with an inclined cover (BTSCIC) is compared with a box-type standard solar cooker (BSSC). The area, heat input, and thermal efficiency have all increased significantly. The total absorbing area increases by 32%, total solar radiation by 189%, absorber plate temperature by 19.8%, inner air temperature by 16.5%, pot water temperature by 17.1%, and inner wall average temperature by 58%, as compared to box-type Standard Solar Cooker. The average exergy was 4.2% (BTSCIC) and 2.61% (BSSC), respectively. The cost payback period of BTSCIC was 2.22 years and BSSC 1.5 years., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

In this study, an assessment based on energy, exergy, economic, and environmental approaches on a double-pass (DP) solar air heater (SAH) having pin finned absorber at different air mass ratios up and down the absorber is investigated experimentally. Four air mass ratios are considered: (i) all the air mass flow passes up the absorber and returns to pass down the absorber (DP), (ii) 2/3 of the airflow passes up the absorber and returns to mix with the remainder of air to pass down the absorber (2/3 DP), (iii) the same as (ii) but 1/3 of the air passes up the absorber (1/3 DP), and (iv) all the air mass passes only down the absorber (single pass, SP). For all mass ratios, the performance of pin finned SAH (P_SAH) is compared with that of flat SAH (F_SAH). The results indicated that the air temperature rise and energy and exergy efficiencies of P_SAH are highly greater than those of F_SAH. The highest average thermal efficiency of F_SAH is 56.7% obtained at DP flow condition, whereas the highest value of P_SAH is 65.21% obtained at 2/3 DP with an increase of 17.6% compared with F_SAH. Also, P_SAH has higher average exergy efficiency of about 34.7% compared to F_SAH. Furthermore, P_SAH achieves energy payback time (EPBT) lower than that of F_SAH, while P_SAH has higher embodied energy. The findings indicated that F_SAH at SP airflow pattern has the maximum energy cost (0.0427 $/kWh), whereas P_SAH at 2/3 DP airflow pattern achieves the minimum energy cost (0.037 $/kWh). Finally, the proposed P_SAH system appears to be more viable from exergoeconomic and enviroeconomic approaches compared to F_SAH.

The performance of single slope solar still with an enhanced condenser at different saline water mediums in the basin is studied and assessed based on productivity, energy, exergy, economic, and enviroeconomic methodologies. Six solar still configurations are considered: conventional solar still (CSS); modified solar still (MSS) which is a still with heat sink condenser; MSS having an umbrella (MSS + U); MSS with forced-air cooling (MSS + FA); MSS with forced-water cooling (MSS + FW); and finally, MSS with forced-water cooling and contains sand in the basin (MSS + FW + SD). Experiments are conducted under hot and cold climate conditions of Sohag city, Egypt. The results indicate that the MSS + FW + SD has a maximum daily yield of 5.37 kg/m 2 in summer and 2.74 kg/m 2 in winter with an increase of 36% in summer and 26% in winter compared with CSS. It was found that the maximum increase of the energy and exergy efficiency compared with CSS is achieved in the case of MSS + FW + SD of 39% and 33%, respectively. Furthermore, the maximum and minimum cost of freshwater is achieved in cases of MSS + U and MSS + FW + SD, respectively. Finally, among all studied systems, MSS + FW + SD achieves the best performance based on the exergoeconomic approach.