Search

Genetic correlations between 29 wool production and quality traits and 25 meat quality and nutritional value traits were estimated for Merino sheep from an Information Nucleus (IN). Genetic correlations among the meat quality and nutritional value traits are also reported. The IN comprised 8 flocks linked genetically and managed across a range of sheep production environments in Australia. The wool traits included over 5,000 yearling and 3,700 adult records for fleece weight, fiber diameter, staple length, staple strength, fiber diameter variation, scoured wool color, and visual scores for breech and body wrinkle. The meat quality traits were measured on samples from the and included over 1,200 records from progeny of over 170 sires for intramuscular fat (IMF), shear force of meat aged for 5 d (SF5), 24 h postmortem pH (pHLL; also measured in the , pHST), fresh and retail meat color and meat nutritional value traits such as iron and zinc levels, and long-chain omega-3 and omega-6 polyunsaturated fatty acid levels. Estimated heritabilities for IMF, SF5, pHLL, pHST, retail meat color lightness (), myoglobin, iron, zinc and across the range of long-chain fatty acids were 0.58 ± 0.11, 0.10 ± 0.09, 0.15 ± 0.07, 0.20 ± 0.10, 0.59 ± 0.15, 0.31 ± 0.09, 0.20 ± 0.09, 0.11 ± 0.09, and range of 0.00 (eicosapentaenoic, docosapentaenoic, and arachidonic acids) to 0.14 ± 0.07 (linoleic acid), respectively. The genetic correlations between the wool production and meat quality traits were low to negligible and indicate that wool breeding programs will have little or no effect on meat quality. There were moderately favorable genetic correlations between important yearling wool production traits and the omega-3 fatty acids that were reduced for corresponding adult wool production traits, but these correlations are unlikely to be important in wool/meat breeding programs because they have high SE, and the omega-3 traits have little or no genetic variance. Significant genetic correlations among the meat quality traits included IMF with SF5 (-0.76 ± 0.24), fresh meat color * (0.50 ± 0.18), and zinc (0.41 ± 0.19). Selection to increase IMF will improve meat tenderness and color which may address some of the issues with Merino meat quality. These estimated parameters allow Merino breeders to combine wool and meat objectives without compromising meat quality.

Genetic correlations between 29 wool production and quality traits and 14 whole carcass measures and carcass component traits were estimated from the Information Nucleus of 8 flocks managed across a range of Australian sheep production environments and genetically linked. Wool data were from over 5,000 Merino progeny born over 5 yr, whereas carcass data were from over 1,200 wether progeny of over 176 sires, slaughtered at about 21 kg carcass weight, on average. Wool traits included yearling and adult records for wool weight, fiber diameter, fiber diameter variation, staple strength, scoured color, and visual scores for breech and body wrinkle. Whole carcass measures included HCW, dressing percentage (DP), and various measures of fat depth and eye muscle dimensions. Carcass components were obtained by dissection, and lean meat yield (LMY) was predicted. Heritability estimates for whole carcass measures ranged from 0.12 ± 0.08 to 0.35 ± 0.10 and ranged from 0.17 ± 0.10 to 0.46 ± 0.10 for carcass dissection traits, with no evidence of important genotype × environment interactions. Genetic correlations indicated that selection for increased clean wool weight will result in reduced carcass fat (-0.17 to -0.34) and DP (-0.48 ± 0.15), with little effect on carcass muscle. Selection for lower fiber diameter will reduce HCW (-0.48 ± 0.15) as well as carcass fat (0.14 to 0.27) and muscle (0.21 to 0.50). There were high genetic correlations between live animal measures of fat and muscle depth and the carcass traits (generally greater than 0.5 in size). Selection to increase HCW (and DP) will result in sheep with fewer wrinkles on the body (-0.57 ± 0.10) and barer breeches (-0.74 ± 0.12, favorable), with minor deterioration in scoured wool color (reduced brightness and increased yellowness). Selection for reduced fat will also result in sheep with fewer body wrinkles (-0.42 to -0.79). Increasing LMY in Merinos through selection would result in a large reduction in carcass fat and DP (-0.66 to -0.84), with a smaller increase in carcass muscle and some increase in wool weight and wrinkles. Although no major antagonisms are apparent between the wool and carcass traits, developing selection indexes for dual-purpose wool and meat breeding objectives will require accurate estimates of genetic parameters to ensure that unfavorable relationships are suitably considered. The findings will aid development of dual-purpose wool and meat breeding objectives.

Genetic correlations between 29 wool production and quality traits and live weight and ultrasound fat depth (FAT) and eye muscle depth (EMD) traits were estimated from the Information Nucleus (IN). The IN comprised 8 genetically linked flocks managed across a range of Australian sheep production environments. The data were from a maximum of 9,135 progeny born over 5 yr from 184 Merino sires and 4,614 Merino dams. The wool traits included records for yearling and adult fleece weight, fiber diameter (FD), staple length (SL), fiber diameter CV (FDCV), scoured color, and visual scores for breech and body wrinkle. We found high heritability for the major yearling wool production traits and some wool quality traits, whereas other wool quality traits, wool color, and visual traits were moderately heritable. The estimates of heritability for live weight generally increased with age as maternal effects declined. Estimates of heritability for the ultrasound traits were also higher when measured at yearling age rather than at postweaning age. The genetic correlations for fleece weight with live weights were positive (favorable) and moderate (approximately 0.5 ± 0.1), whereas those with FD were approximately 0.3 (unfavorable). The other wool traits had lower genetic correlations with the live weights. The genetic correlations for FAT and EMD with FD and SL were positive and low, with FDCV low to moderate negative, but variable with wool weight and negligible for the other wool traits. The genetic correlations for FAT and EMD with postweaning weight were positive and high (0.61 ± 0.18 to 0.75 ± 0.14) but were generally moderate with weights at other ages. Selection for increased live weight will result in a moderate correlated increase in wool weight as well as favorable reductions in breech cover and wrinkle, along with some unfavorable increases in FD and wool yellowness but little impact on other wool traits. The ultrasound meat traits, FAT and EMD, were highly positively genetically correlated (0.8), and selection to increase them would result in a small unfavorable correlated increase in FD, moderately favorable reductions in breech cover and wrinkle, but equivocal or negligible changes in other wool traits. The estimated parameters provide the basis for calculation of more accurate Australian Sheep Breeding Values and selection indexes that combine wool and meat objectives in Merino breeding programs.

Genetic parameters were estimated for a range of meat quality traits recorded on Australian lamb meat. Data were collected from Merino and crossbred progeny of Merino, terminal and maternal meat breed sires of the Information Nucleus programme. Lambs born between 2007 and 2010 (n=8968) were slaughtered, these being the progeny of 372 sires and 5309 dams. Meat quality traits were found generally to be of moderate heritability (estimates between 0.15 and 0.30 for measures of meat tenderness, meat colour, polyunsaturated fat content, mineral content and muscle oxidative capacity), with notable exceptions of intramuscular fat (0.48), ultimate pH (0.08) and fresh meat colour a* (0.08) and b* (0.10) values. Genetic correlations between hot carcass weight and the meat quality traits were low. The genetic correlation between intramuscular fat and shear force was high (-0.62). Several measures of meat quality (fresh meat redness, retail meat redness, retail oxy/met value and iron content) appear to have potential for inclusion in meat sheep breeding objectives., (© 2013.)

The effect of electrical stimulation of lamb carcasses (n=269) or its absence (n=257) on shear force of m. longissimus thoracis et lumborum (LT) was monitored during ageing in pasture-fed merino lambs (n=526). The lambs were slaughtered on four different days allowing durations of between one to 10 days of recovery from pre-slaughter handling (yarding, weighing and crutching) that affected ultimate pH (pH(u)). The right LT was removed 20-40min post-slaughter, tightly-wrapped in cling film (prevents the muscle cross-section increasing and thus minimising shortening) and rapidly cooled to 15°C to enter rigor mortis and age. At 0, 4, 24 and 72h post-slaughter, pH measurements and samples for shear force measurement were taken. Pre-slaughter handling had a significant negative effect on pH(u) and several days recovery were required for pH(u) to reach values associated with optimal meat quality as reflected by pH(u). Lambs with one and three days recovery (no significant difference between them) had a pH(u)>5.7 in 50% of the muscles and 19.4%>pH(u) 5.8. Whereas, in lambs with 8-10 days recovery (no significant difference between them), only 8% had a pH(u)>5.7 and 3.1%>pH(u) 5.8. Within each slaughter day electrically stimulated lambs were always more tender than non-stimulated lambs. For non-stimulated muscles at 72h, shear force values >40N occurred for 11.2% of the muscles: for electrically stimulated muscles at 72h, shear force values >40N occurred for 1.9% of the muscles. The rates of tenderisation were slower for intermediate pH(u) values resulting in higher shear force values at all ageing durations. With ageing at 72h for intermediate pH(u), non-stimulated muscles (n=38) 17.64% were >40N and for stimulated muscles (n=34), 7.9% were >40N.