Search

Investigating the thermophysical properties of substances is crucial for using them as phase change materials (PCMs) and heat transfer fluids (HTFs) in thermal energy applications. In this study, the thermophysical properties of three medium-temperature PCMs (around 338 K) and one ionic liquid, tetrabutylammonium chloride ([N 4444 + ][Cl - ]), were evaluated and compared. The commercial PCMs were two fatty acids (OM65 and stearic acid) and one paraffin (RT64HC). The characterised thermophysical properties were the viscosity, density, phase change temperatures, melting and solidification enthalpies, and thermal conductivity for the solid and liquid phases. The uncertainties for each property were calculated, and two empirical equations were obtained from the correlation of viscosity and thermal conductivity data along isotherms. This paper also compared the thermophysical properties of commercial PCMs and HTFs against the ionic liquid, discussing the potential use of the ionic liquid as a thermal energy storage material and HTFs., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The objective of this work was to evaluate elemental changes in pepper exposed to Cd stress through different chemometric tools. For this purpose, pepper plants were grown under five different treatments with different Cd concentrations in the nutrient solution. Considering the hypothesis that pepper plants exposed to Cd stress during growth undergo changes in the macro- and microelemental distribution in leaves, stems, and roots, principal component analysis (PCA) and parallel factor (PARAFAC) analysis were applied to compare bidirectional and multivariate chemometric strategies to assess elemental changes in pepper plants. Since the number of variables and the data generated were large and complex, the application of chemometric tools was justified to facilitate the visualization and interpretation of results. The mineral composition, namely the Ca, Cd, Cu, Fe, K, Mg, Mn, N, and P contents, was assessed in 180 samples of leaves, stems, and roots of the cultivated peppers. Then, PCA and PARAFAC analysis were applied to compare bidirectional and multivariate chemometric strategies to assess elemental changes throughout pepper plants. The visualization of the trend on each sample and their intrinsic relationship with the variables were possible with the application of PCA. The use of PARAFAC analysis permitted the simultaneous study of all samples in a straightforward representation of the information that facilitated a quick and comprehensive understanding of the spatial distribution of elements in plants. Thus, macroelements (Ca, K, Mg, N, and P) that were found in higher concentrations in leaves did not present significant differences in the distribution along the plants under different treatment conditions. In contrast, a significant impact on the microelement (Cu, Fe, and Mn) distribution was produced between uncontaminated and contaminated samples. This analysis revealed a significant accumulation of Cd in roots and adverse effects on normal plant growth, demonstrating their level of phytotoxicity to pepper., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

In this work, microwave-induced plasma optical emission spectrometry was applied for multielement determination in South American wine samples. The analytes were determined after acid digestion of 47 samples of Brazilian and Argentinian wines. Then, logistic regression, support vector machine, and decision tree for exploratory analysis and comparison of these algorithms in differentiating red wine samples by region of origin were carried out. All wine samples were classified according to their geographical origin. The quantification limits (mg L -1 ) were P: 0.06, B: 0.08, K: 0.17, Mn: 0.002, Cr: 0.002, and Al: 0.02. The accuracy of the method was evaluated by analyzing the wine samples by ICP OES for results' comparison. The concentrations in mg L -1 found for each element in wine samples were as follows: Al (< 0.02-1.82), Cr (0.15-0.50), Mn (< 0.002-0.8), P (97-277), B (1.7-11.6), Pb (< 0.06-0.3), Na (8.84-41.57), and K (604-1701), in mg L -1 ., (© 2022. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

The objective of this work was to evaluate the influence of different growth regulators on the mineral and total phenolic contents of Salvia officinalis. The samples received the applications of salicylic acid (AS); gibberellic acid (GA 3 ); abscisic acid (ABA) and solution without regulators (control). The exploratory evaluation of the samples was carried out through the Principal Component Analysis (PCA). In addition, has been used supervised learning methods with support vector machine (SVM) algorithms to classify the samples. The phenolic and total flavonoid contents were higher in the plants treated with the regulators. The element found in the highest concentration in Salvia officinalis was N. Plants sprayed with ABA showed higher concentrations of N, K, and Mn; Fe and Al were higher with ABA and gibberellin application, while the application of AS provided the highest accumulation of P. The application of plant regulators improves the nutraceutical properties of Salvia officinalis., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Basil is an edible, aromatic plant, which makes the study of the ecotoxicity of metals in plant metabolism relevant. Given the above, the objective of this study was to evaluate the effects of metals, aluminum, lead, and cadmium, in the synthesis of phenolic compounds and in the dry mass of basil plants (O. basilicum L.) grown in a hydroponic system. The plants were subjected to four different concentrations of cadmium (0.2, 0.6, 1.2, and 1.8 mmol L -1 ), lead and aluminum (0.04, 0.08, 0.12, and 0.16 mmol L -1 ), and compared with the control. After desiccation of the plant material, the total dry mass was obtained and then, hydroethanolic extracts (43% distilled water and 57% ethanol) were made for biochemical analyzes, which consisted of the determination of caffeic acid (CA) and rosmarinic acid (RA) by high performance liquid chromatography analysis with a diode detector (HPLC-DAD); total phenolics (TP) and total flavonoids (TF) by spectrophotometry. The data were submitted to analysis of variance and multivariate analysis (principal component analysis-PCA and hierarchical cluster analysis-HCA) was applied for data association. The phenolic compounds showed a high positive correlation with each other, and the total dry mass showed low and negative correlations with the analyzed variables. The results showed that the metals aluminum, lead, and cadmium promoted a stress condition in basil plants, which resulted in the reduction of the dry matter mass and an increase in the synthesis of phenolic compounds, according to the type and concentration of the metal., (Copyright © 2021 Elsevier Ltd. All rights reserved.)