Search

Photonic synapses combining photosensitivity and synaptic function can efficiently perceive and memorize visual information, making them crucial for the development of artificial vision systems. However, the development of high-performance photonic synapses with low power consumption and rapid optical erasing ability remains challenging. Here, we propose a photon-modulated charging/discharging mechanism for self-powered photonic synapses. The current hysteresis enables the devices based on CsPbBr 3 /solvent/carbon nitride multilayer architecture to emulate synaptic behaviors, such as excitatory postsynaptic currents, paired-pulse facilitation, and long/short-term memory. Intriguingly, the unique radiation direction-dependent photocurrent endows the photonic synapses with the capability of optical writing and rapid optical erasing. Moreover, the photonic synapses exhibit exceptional performance in contrast enhancement and noise reduction owing to the notable synaptic plasticity. In simulations based on artificial neural network (ANN) algorithms, the pre-processing by our photonic synapses improves the recognition rate of handwritten digit from 11.4% (200 training epochs) to 85% (~60 training epochs). Furthermore, due to the excellent feature extraction and memory capability, an array based on the photonic synapses can imitate facial recognition of human retina without the assistance of ANN., Competing Interests: Competing interests: The authors declare that they have no competing interests., (Copyright © 2024 Mingchao Li et al.)

Various semiconductor devices have been developed based on 2D heterojunction materials owing to their distinctive optoelectronic properties. However, to achieve efficient charge transfer at their interface remains a major challenge. Herein, an alloy heterojunction concept is proposed. The sulfur vacancies in ZnIn 2 S 4 are filled with selenium atoms of PdSe 2 . This chemically bonded heterojunction can significantly enhance the separation of photocarriers, providing notable advantages in the field of photoelectric conversion. As a demonstration, a two-terminal photodetector based on the PdSe 2 /ZnIn 2 S 4 heterojunction materials is fabricated. The photodetector exhibits stable operation in ambient conditions, showcasing superior performance in terms of large photocurrent, high responsivity (48.8 mA W -1 ) and detectivity (1.98 × 10 11 Jones). To further validate the excellent optoelectronic performance of the heterojunction, a tri-terminal phototransistor is also fabricated. Benefiting from gate voltage modulation, the photocurrent is amplified to milliampere level, and the responsivity is increased to 229.14 mA W -1 . These findings collectively demonstrate the significant potential of the chemically bonded PdSe 2 /ZnIn 2 S 4 alloy heterojunction for future optoelectronic applications., (© 2024 Wiley‐VCH GmbH.)

The smart materials with multi-color and stimuli-responsive luminescence are very promising for next generation of optical information encryption and anti-counterfeiting, but these materials are still scarce. Herein, a multi-level information encryption strategy is developed based on the polychromatic emission of Sb-doped double perovskite powders (SDPPs). Cs 2 NaInCl 6 :Sb, Cs 2 KInCl 6 :Sb, and Cs 2 AgInCl 6 :Sb synthesized through coprecipitation methods exhibit broadband emissions with bright blue, cyan, and orange colors, respectively. The information transmitted by specific SDPP is encrypted when different SDPPs are mixed. The confidential information can be decrypted by selecting the corresponding narrowband filter. Then, an encrypted quick response (QR) code with improved security is demonstrated based on this multi-channel selection strategy. Moreover, the three types of SDPPs exhibit three different water-triggered luminescence switching behaviors. The confidential information represented by Cs 2 NaInCl 6 :Sb can be erased/recovered through a simple water spray/drying. Whereas, the information collected from the green channel is permanently erased by moisture, which fundamentally avoids information leakage. Therefore, different encryption schemes can be designed to meet a variety of encryption requirements. The multicolor and stimuli-responsive luminescence greatly enrich the flexibility of optical information encryption, which leaps the level of security and confidentiality., (© 2024 The Authors. Advanced Science published by Wiley‐VCH GmbH.)

Neuromorphic visual sensors (NVS) based on photonic synapses hold a significant promise to emulate the human visual system. However, current photonic synapses rely on exquisite engineering of the complex heterogeneous interface to realize learning and memory functions, resulting in high fabrication cost, reduced reliability, high energy consumption and uncompact architecture, severely limiting the up-scaled manufacture, and on-chip integration. Here a photo-memory fundamental based on ion-exciton coupling is innovated to simplify synaptic structure and minimize energy consumption. Due to the intrinsic organic/inorganic interface within the crystal, the photodetector based on monolithic 2D perovskite exhibits a persistent photocurrent lasting about 90 s, enabling versatile synaptic functions. The electrical power consumption per synaptic event is estimated to be≈1.45 × 10 -16  J, one order of magnitude lower than that in a natural biological system. Proof-of-concept image preprocessing using the neuromorphic vision sensors enabled by photonic synapse demonstrates 4 times enhancement of classification accuracy. Furthermore, getting rid of the artificial neural network, an expectation-based thresholding model is put forward to mimic the human visual system for facial recognition. This conceptual device unveils a new mechanism to simplify synaptic structure, promising the transformation of the NVS and fostering the emergence of next generation neural networks., (© 2024 The Authors. Advanced Materials published by Wiley‐VCH GmbH.)

The Rashba effect appears in the semiconductors with an inversion-asymmetric structure and strong spin-orbit coupling, which splits the spin-degenerated band into two sub-bands with opposite spin states. The Rashba effect can not only be used to regulate carrier relaxations, thereby improving the performance of photoelectric devices, but also used to expand the applications of semiconductors in spintronics. In this mini-review, recent research progress on the Rashba effect of two-dimensional (2D) organic-inorganic hybrid perovskites is summarized. The origin and magnitude of Rashba spin splitting, layer-dependent Rashba band splitting of 2D perovskites, the Rashba effect in 2D perovskite quantum dots, a 2D/3D perovskite composite, and 2D-perovskites-based van der Waals heterostructures are discussed. Moreover, applications of the 2D Rashba effect in circularly polarized light detection are reviewed. Finally, future research to modulate the Rashba strength in 2D perovskites is prospected, which is conceived to promote the optoelectronic and spintronic applications of 2D perovskites.

Photovoltaic device is highly dependent on the weather, which is completely ineffective on rainy days. Therefore, it is very significant to design an all-weather power generation system that can utilize a variety of natural energy. This work develops a water droplet friction power generation (WDFG)/solar-thermal power generation (STG) hybrid system. The WDFG consists of two metal electrodes and a candle soot/polymer composite film, which also can be regarded as a capacitor. Thus, the capacitor coupled power generation (C-WDFG) device can achieve a sustainable and stable direct-current (DC) output under continuous dripping without external conversion circuits. A single device can produce an open-circuit voltage of ca.0.52 V and a short-circuit current of ca.0.06 mA, which can be further scaled up through series or parallel connection to drive commercial electronics. Moreover, we demonstrate that the C-WDFG is highly compatible with the thermoelectric device. The excellent photothermal performance of soot/polymer composite film can efficiently convert solar into heat, which is then converted to electricity by the thermoelectric device. Therefore, this C-WDFG/STG hybrid system can work in both rainy and sunny days., (© 2023 IOP Publishing Ltd.)

Increasing attention has been paid recently to superwettability and its prospective potential applications in various fields. A new approach towards the establishment of flexible, self-assembled superhydrophobic surfaces with self-reported wettability on a variety of substrates has been advanced. The approach involves the fabrication of a dense monolayer of photonic crystal films that possess a layered structure with superior adhesion at the liquid-gas-solid interface. Thus, the resulting hierarchical photonic crystal film with a structurally hydrophobic surface offers a promising addition to the creation of durable and flexible superhydrophobic surfaces across a variety of substrates that exhibit the self-reported wettability. Furthermore, a bifunctional membrane that can effectively remove oil and adsorb heavy metal ions contained in wastewater has been developed for potential use in large-scale industrial wastewater treatment. This research sheds fresh light on the application of bionics and the lotus and mussel functions in oil/water separation.

Optical multiplexing is a pivotal technique for augmenting the capacity of optical data storage (ODS) and increasing the security of anti-counterfeiting. However, due to the dearth of appropriate storage media, optical multiplexing is generally restricted to a single dimension, thus curtailing the encoding capacity. Herein, the co-multiplexing spectral and temporal dimensions are proposed for optical encoding based on photoluminescence (PL) and persistent-luminescence (PersL) at four different wavelengths. Each emission color comprises four luminescence modes. The further multiplexing of four wavelengths leads to the maximum encoding capacity of 8 bits at each pixel. The wavelength difference between adjacent peaks is larger than 50 nm. The well-separated emission wavelengths significantly lower the requirements for high-resolution spectrometers. Moreover, the information is unable to be decoded until both PL and PersL spectra are collected, suggesting a substantial improvement in information security and the security level of anti-counterfeiting.

We present a snapshot multi-frame parallel holographic microscopy system through a reconfigurable optical comb source, which consists of a digital micromirror device (DMD) based spectrum filter system and a spectroscopic Michelson interferometric system. The proposed system allows arbitrarily tuning comb spacing and comb number, and the capturing of multi-frame images without overlap in one exposure. As a result, high-quality spectral holograms can be obtained with less acquisition time. The performance of the system is detailed in the experiment and 45-wavelengths holographic imaging for perovskite micro-platelets is conducted, which proves the system has the ability to realize high-performance four-dimensional (4D) imaging.

Multicolor fluorescence of mixed halide perovskites enormously enables their applications in photonics and optoelectronics. However, it remains an arduous task to obtain multicolor emissions from perovskites containing single halogen to avoid phase segregation. Herein, a fluorescent composite containing Eu-based metal-organic frameworks (MOFs), 0D Cs 4 PbBr 6 , and 3D CsPbBr 3 is synthesized. Under excitations at 365 nm and 254 nm, the pristine composite emits blue (B) and red (R) fluorescence, which are ascribed to radiative defects within Cs 4 PbBr 6 and 5 D 0 → 7 F J transitions of Eu 3+ , respectively. Interestingly, after light soaking in the ambient environment, the blue fluorescence gradually converts into green (G) emission due to the defect repairing and 0D-3D phase conversion. This permanent and unique photochromic effect enables anticounterfeiting and microsteganography with increased security through a micropatterning technique. Moreover, the RGB luminescence is highly stable after encapsulation by a transparent polymer layer. Thus, trichromatic light-emitting modules are fabricated by using the fluorescent composites as color-converting layers, which almost fully cover the standard color gamut. Therefore, this work innovates a strategy for construction of tunable multicolor luminescence by manipulating the radiative defects and structural dimensionality., Competing Interests: The authors declare that there is no conflict of interest regarding the publication of this article., (Copyright © 2022 Kewei Ma et al.)

Despite the demonstrated high-efficiency of solar cells and light-emitting devices based on two-dimensional (2D) perovskites, intrinsic stability of the 2D perovskites is yet far from satisfactory. In this work, we find the 2D (BA) 2 PbI 4 perovskite crystals rapidly degrade in the ambient conditions and the photoluminescence (PL) nearly completely quenches in 6 d. Moreover, the PL shoulder band due to defects and absorption band of PbI 2 gradually rise during degradation, suggesting the precipitation of PbI 2 . Besides, rod structures are observed in the degraded crystals, which are attributed to the formation of one-dimensional (1D) (BA) 3 PbI 5 perovskites. And the degradation can be largely retarded by decreasing the humidity during storage. Therefore, a chemical reaction for the degradation of (BA) 2 PbI 4 is proposed, revealing the interactions between water molecules and undercoordinated defects are very critical for understanding the degradation. Enlightened by these findings, dimethyl itaconate (DI) treatment is developed to passivate the defects and block the intrusion of moisture to improve the stability of the (BA) 2 PbI 4 . After storage in the ambient environment for 16 d, the DI treated (BA) 2 PbI 4 only shows a slight surface degradation without formation of any nanorod-like structures, and the PL intensity retains about 70%. Therefore, our systematic study provides a comprehensive understanding on the degradation dynamics of 2D perovskites, which will promote future development of intrinsically stable 2D perovskites., (© 2022 IOP Publishing Ltd.)

Photoinduced phase segregation (PPS) is considered as a dominant factor that greatly deteriorates the performances of mixed-halide perovskite devices. However, the mechanism of PPS is still under fierce debate. Herein, CsPb(Br x /Cl 1- x ) 3 microplatelets (MPs) with homogeneous and heterogeneous surfaces are obtained by controlling the growth conditions. Under continuous irradiation, a new photoluminescence (PL) band at 516 nm gradually appears in the heterogeneous MPs, accompanied with the decreased emission of the mixed phase at 480 nm, revealing the occurrence of PPS, while the photoirradiation only leads to slight PL dimming without PPS in the homogeneous MPs. The direct correlation between PPS and the structural heterogeneity indicates that the localized electric field-induced drift (LEFD) of halide ions/carriers is responsible for the PPS. In situ microfluorescence images evidence that the migration of halide ions is directed by the structural heterogeneity-induced localized electric field. Our refined model not only consolidates that PPS can be suppressed by eliminating the defects but also reveals that PPS can be directed by the distribution of defects. Therefore, a fluorescence micropatterning technique is developed based on PPS.

The expression of membrane type-1 matrix metalloproteinase (MT1-MMP) in cancer cells is critical for understanding the development, invasion and metastasis of cancers. In this study, we devised an interference-free surface-enhanced Raman scattering (SERS) nanoprobe with high selectivity and specificity for MT1-MMP. The nanoprobe was comprised of silver core-silica shell nanoparticle with a Raman reporter tag (4-mercaptobenzonitrile) embedded in the interface. Moreover, the nitrile group in 4-mercaptobenzonitrile shows a unique characteristic peak in the Raman-silent region (1800-2800 cm -1 ), which eliminates spectral overlapping or background interference in the Raman fingerprint region (500-1800 cm -1 ). After surface modification with a targeting peptide, the nanoprobe allowed visualization and evaluation of MT1-MMP in breast cancer cells via SERS spectrometry. This interference-free, peptide-functionalized SERS nanoprobe is supposed to be conducive to early diagnosis and invasive assessment of cancer in clinical settings., (© 2021 IOP Publishing Ltd.)

Direct laser writing (DLW) is a mask-free and cost-efficient micro-fabrication technology, which has been explored to pattern structures on perovskites. However, there is still a lack of research on DLW methods for microsteganography. Herein, we developed a sophisticated DLW condition to pattern on CsPbBr 3 perovskite micro-platelets (MPs). In addition to the reversible PL quenching caused by photo-induced ion migration, permanent nonradiative centers are also produced by the DLW treatment. Therefore, the patterned information is retained after long-term storage. Meanwhile, the mild DLW condition only results in a faint trace, which is almost invisible under a regular optical microscope. Thus, the patterned information is hidden unless applying an excitation source, which paves the way for applications in microsteganography and anti-counterfeiting. As a proof-of-concept, different patterns are drawn on the CsPbBr 3 MPs by DLW, which are only observable under a fluorescence microscope.

In this work, photothermal materials are integrated with a temperature-sensitive hydrogel and structural color for visually detecting solar intensity. Inspired by the functional performance of beetles, the photothermal layer is constructed by depositing candle soot on a film of Cu nanoparticles, while the temperature-sensitive colored hydrogel is fabricated by self-assembling colloidal photonic crystals on poly( N -isopropylacrylamide) (PNiPAM). The deposition of candle soot not only improves the photothermal performance but also leads to a superhydrophobic surface with a self-cleaning function. The photothermal layer absorbs sunlight and converts it into heat, which is then transferred to the hydrogel. The structural color of the hydrogel changes due to the heat-induced volume shrinkage. As the solar intensity increases from 0.62 to 1.27 kW/m 2 , the structural color conspicuously changes from red to orange, yellow, green, cyan, and blue, with reflection peaks shifting from 640 to 460 nm accordingly. The color change is highly apparent, which can be easily observed by the naked eye, suggesting that the solar intensity can be easily detected by reading out the structural color. This power-free and self-cleaning solar sensor can work for a long period without maintenance, which is suitable for a wide application prospect, such as smart home and agriculture.

During synthesis, device processes, and applications of perovskite nanocrystals (NCs), there are usually inevitable interactions between perovskite NCs and polar solvents. To elaborately control the properties of perovskite NCs, investigating the effects of solvent polarity on perovskite NCs is thus highly important. Herein, fluorescent variations induced by different solvents into CsPbBr 3 NCs solution are systematically studied. In this report, it is found that when CsPbBr 3 NCs are treated with polar solvents, the fluorescence intensity decreases with a general redshift of fluorescence peak position. Moreover, the fluorescence quenching and peak position shift amplitude monotonously increase with the solvent polarity. Absorption spectra and fluorescent lifetime suggest that, with addition of polar solvents, the surface of NCs are destroyed and defect states are generated, leading to the fluorescent variations. Besides, dielectric constant of the solvent also increases with polarity, which may weaken the quantum confinement effect and decrease the exciton binding energy. We find the fluorescence may slightly blue shift if the emission of free carrier is strong enough with certain solvents, such as dimethylsulfoxide (DMSO). We also find the fluorescence intensity generally deceases to a stable state in 2 min, indicating quick interactions between CsPbBr 3 NCs and solvents. However, water continuously quenches the fluorescence of CsPbBr 3 NCs up to 72 h due to the poor miscibility between water and n-hexane. This work not only provides a comprehensive understanding on the fluorescent dynamics of CsPbBr 3 NCs in polar solvents but also affords a potential fluorescent indicator for solvent polarity.

Surgical mask is recommended by the World Health Organization for personal protection against disease transmission. However, most of the surgical masks on the market are disposable that cannot be self-sterilized for reuse. Thus, when confronting the global public health crisis, a severe shortage of mask resource is inevitable. In this paper, a novel low-cost electrothermal mask with excellent self-sterilization performance and portability is reported to overcome this shortage. First, a flexible, ventilated, and conductive cloth tape is patterned and adhered to the surface of a filter layer made of melt-blown nonwoven fabrics (MNF), which functions as interdigital electrodes. Then, a graphene layer with premier electric and thermal conductivity is coated onto the MNF. Operating under a low voltage of 3 V, the graphene-modified MNF (mod-MNF) can quickly generate large amounts of heat to achieve a high temperature above 80 °C, which can kill the majority of known viruses attached to the filter layer and the mask surface. Finally, the optimized graphene-modified masks based on the mod-MNF filter retain a relatively high particulate matter (PM) removal efficiency and a low-pressure drop. Moreover, the electrothermal masks can maintain almost the same PM removal efficiency over 10 times of electrifying, suggesting its outstanding reusability.

Materials with specific wettability properties have aroused enormous interest and research for their broad application prospects in chemical reaction, medical diagnosis, biological analysis, etc. Here, inspired by the unique Janus wettability of lotus leaf and Bragg stacks of beetles, we present a free-standing film with Janus wettability and tunable structural color for water quality monitoring. This film is constructed by using a flexible polymer polyurethane (PU) to pack poly( N -isopropyl acrylamide-bis-acrylamide-acrylic acid) (P(NiPAAm-bis-AA))/TiO 2 one-dimensional photonic crystals (1DPCs) into a free-standing state with Janus wettability and tunable structural color. The outer top surface of the film could achieve vivid structural color and a superhydrophobic ability; meanwhile, the outer lower surface could achieve a superhydrophilic ability. Owing to the outstanding pH-sensitive property of the P(NiPAAm-bis-AA), the Janus films could switch its structural color under different pH conditions. This imparts the free-standing film with stability and an antirotation property on the air-water interface. Based on this phenomenon, we have demonstrated a Janus wettability film, together with tunable structural color for water quality monitoring, which gives the bioinspired materials high potential applications in environmental protection.

Solar-driven water evaporation is considered to be an effective method for seawater desalination and wastewater purification. Here, we report a novel solar steam generation (SSG) system based on reduced graphene oxide (rGO)/nickel foam. Porous rGO foam acting as a photothermal conversion layer is fabricated by coating the rGO microsheets on the metallic nickel foam. The porous structure shows a rough surface, which can improve the harvest of light by scattering effect. On the other hand, the porous structure ensures the rapid flow of steam in the evaporation process. This SSG system based on rGO/nickel foam converts the absorbed solar energy into heat energy at the water-air interface and can effectively evaporate (∼83.4%) under low irradiation of 1 sun (1 kw m -2 ). The system shows great potential for the practical applications of water treatment at large-scale because of the high efficiency, simple preparation method and low cost.

Solar steam generation provides a renewable and environmentally friendly approach to solve the water shortage issue. The pursuit of efficient, stable, and cheap photothermal agents is thus of great significance. In this work, Cu nanoparticles (NPs) fabricated simply by a substitution reaction, exhibit a near-unity (∼97.7%) light absorption, covering a broad incident angle and wavelength range (200-1300 nm). Thereby, a high photothermal conversion efficiency of 93% is achieved. The excellent photothermal performance offers a unique opportunity for the development of solar steam generation. By coating the Cu NPs on a cellulose membrane, a solar steam generation efficiency up to 73% is acquired at a low irradiation power density of 2 kW m -2 (1 kW m -2  = 1 sun). Moreover, the Cu NPs are recyclable with the high stability being resistant to heat, photoirradiation and corrosion of brine.

An efficient electron field emitter based on a monolayer graphene coated well aligned Mo tip array has been designed, fabricated, and evaluated. The advantages of this hybrid nanostructure film morphology are explored and discussed. Efficient and stable field emissions with low turn-on fields have been observed with the new devices. It is further found that the combination of graphene and Mo tip array leads to significant improvements in efficiency for the nanoscale heterostructure emitters., Competing Interests: The authors declare no conflict of interest.

A three-dimensional patterned CNT framework was prepared in a thermal chemical vapor deposition system. ZnO nanoneedles with different areal density were subsequently grown on it via hydrothermal method. By combining the advantages of high aspect ratio, more effective emission sites with minimized screen effect and good Ohmic contact between ZnO nanoneedles and CNT framework, the ZnO/CNT hierarchical nanostructures with medium areal density exhibit a favorable FE performance which makes it promising candidate for cold cathode nanomaterials.

The paper first analyzes the effect of backlight unit for liquid crystal displays on the respect of image quality and power consumption. A spatially and temporally addressable backlight is required in the future liquid crystal displays which have lower power consumption and higher image quality. Compared to the currently used light emitting diode backlight, the simulation results indicate that a rectangular-shaped backlight has better performances on the respect of reducing power consumption and improving image quality. A backlight cell based on the field emission is manufactured and studied. It uses a mixture of multi-wall carbon nanotubes and tetrapod-like zinc oxide nanostructures as the cathode and applies spin-coating process for fabrication. The experiment shows that such field emission backlight unit has a low turn-on field which enables a high backlight luminance at acceptable driving voltage. Besides, this mixture cathode helps to improve the uniformity of field emission in both spatial and temporal domain which is important for the application of backlight unit.