Search

The phase behavior of block copolymers (BCPs) at the water-oil interface is influenced by the segmental interaction parameter ( χ ${\chi }$ ) and chain architecture. We synthesized a series of star block copolymers (s-BCPs) having polystyrene (PS) as core and poly(2-vinylpyridine) (P2VP) as corona. The interaction parameters of block-block ( χ ${\chi }$ PS-P2VP ) and block-solvent ( χ ${\chi }$ P2VP-solvent ) were varied by adjusting the pH of the aqueous solution. Lowering pH increased the fraction of quaternized-P2VP (Q-P2VP) with enhanced hydrophilicity. By transferring the equilibrated interfacial assemblies, morphologies ranging from bicontinuous films at pH of 7 and 3.1 to nanoporous and nanotubular structure at pH of 0.65 were observed. The nanoporous films formed hexagonally packed pores in s-BCP matrix, while nanotubes comprised Q-P2VP as corona and PS as core. Control over pore size, d-spacing between pores, and nanotube diameters was achieved by varying polymer concentration, molecular weight, volume fraction and arm number of s-BCPs. Large-scale nanoporous films were obtained by freeze-drying emulsions. Remarkably, the morphologies of linear BCPs were inverted, forming hexagonal-packed rigid spherical micelles with Q-P2VP as core and PS as corona in multilayer. This work provides insights of phase behaviors of BCP at fluids interface and offer a facile approach to prepare nanoporous film with well-controlled pore structure., (© 2024 Wiley-VCH GmbH.)

To understand and resolve adsorption, reconfiguration, and equilibrium conformations of charged star copolymers, we carried out an integrated experimental and coarse-grained molecular dynamics simulation study of the assembly process at the oil-water interface. This is important to guide development of novel surfactants or amphiphiles for chemical transformations and separations. The star block copolymer consisted of arms that are comprised of hydrophilic-hydrophobic block copolymers that are covalently tethered via the hydrophobic blocks to one point. The hydrophobic core represents polystyrene (PS) chains, while the hydrophilic corona represents quaternized poly(2-vinylpyridine) (P2VP) chains. The P2VP is modeled to become protonated when in contact with an acidic aqueous phase, thereby massively increasing the hydrophilicity of this block, and changing the nature of the star at the oil-water interface. This results in a configurational change whereby the chains comprising the hydrophilic corona are significantly stretched into the aqueous phase, while the hydrophobic core remains solubilized in the oil phase. In the simulations, we followed the kinetics of the anchoring and assembly of the star block copolymer at the interface, monitoring the lateral assembly, and the subsequent reconfiguration of the star via changes in the interfacial tension that varies as the degree-of-protonation increases. At low fractions of protonation, the arm cannot fully partition into the aqueous side of the interface and instead interacts with other arms in the oil phase forming a network near the interface. These insights were used to interpret the non-monotonic dependence of pH with the asymptotic interfacial tension from pendant drop tensiometry experiments and spectral signatures of aromatic stretches seen in vibrational sum frequency generation (SFG) spectroscopy. We describe the relationship of interfacial tension to the star assembly via the Frumkin isotherm, which phenomenologically describes anti-cooperativity in adsorbing stars to the interface due to crowding. Although our model explicitly considers long-range electrostatics, the contribution of electrostatics to interfacial tension is small and brought about by strong counterion condensation at the interface. These results provide key insights into resolving the adsorption, reconfiguration, and equilibrium conformations of charged star block copolymers as surfactants.

Polyolefins compose the majority of plastic waste, but conventional mechanical recycling degrades their properties, thereby reducing their value. We report the functionalization of a model for dehydrogenated polyethylene, polycyclooctene (PCOE), with thiol-ene click chemistry to install pendant hydroxyl ethyl thioethers. Functionalization of PCOE using mercaptoethanol via thiol-ene click chemistry yielded functionalization between 1.4 and 22.9% based on ethylene monomeric units. Reactions were well-controlled by varying the reagent stoichiometry and reaction time. Crystallinity and melting temperature decreased, and glass transition temperature increased with greater functionalization. Contact angle measurements reveal an increase in surface polarity with functionalization. Comparisons with poly(ethylene- co -vinyl alcohol) (EVOH) show comparable surface polarity at similar levels of alcohol functionalization. At 12% functionalization, the ultimate shear stress (USS) of functionalized PCOE in an adhesive configuration is 4.10 ± 0.48 MPa, comparable to EVOH. At >12% functionalization, the failure mode changed from adhesive to mixed adhesive-cohesive, and the USS decreased.

One of the important challenges in designing robust alkaline anion exchange membranes is the difficulty associated with the chemical stability of covalently bound cationic units. Here, a systematic study exploring alkaline stabilities of polymerizable hexyltrimethylammonium cations is presented, where the hexyl chain is linked to a phenyl ring through a direct carbon-carbon, phenyl ether, or benzyl ether functionality. For this work, small molecule model compounds, styrenic monomer analogs, and their homopolymers are synthesized. Alkaline stabilities of the small molecule cations and their homopolymers are compared to alkaline stability of benzyltrimethylammonium (BTMA) cation and its homopolymer poly(BTMA), respectively. All the hexyl-tethered cations and their homopolymers are significantly more stable under strongly alkaline conditions (2 m KOD at 80 °C). Moreover, ether-linked cations show comparable stability to the direct carbon-carbon linked cation. Via 1 H NMR analyses, possible degradation mechanisms are investigated for each small molecule cation. Findings of this study strongly suggest that the alkaline stability is dictated by the steric hindrance around the β-hydrogen. This study expands beyond the limits of general knowledge on alkaline stability of alkyl-tethered ammonium cations via the Hofmann elimination route, highlights important design parameters for stable ammonium cations, and demonstrates accessible directly polymerizable alkaline stable ammonium cations., (© 2021 Wiley-VCH GmbH.)

Polymer nanocomposites containing self-assembled cellulose nanocrystals (CNCs) are ideal for advanced applications requiring both strength and toughness as the helicoidal structure of the CNCs deflects crack propagation and the polymer matrix dissipates impact energy. However, any adsorbed water layer surrounding the CNCs may compromise the interfacial adhesion between the polymer matrix and the CNCs, thus impacting stress transfer at that interface. Therefore, it is critical to study the role of water at the interface in connecting the polymer dynamics and the resulting mechanical performance of the nanocomposite. Here, we explore the effect of polymer confinement and water content on polymer dynamics in CNC nanocomposites by covalently attaching a fluorogenic water-sensitive dye to poly(diethylene glycol methyl ether methacrylate) (PMEO 2 MA), to provide insights into the observed mechanical performance. Utilizing fluorescence lifetime imaging microscopy (FLIM), the lifetime of dye fluorescence decay was measured to probe the polymer chain dynamics of PMEO 2 MA in CNC nanocomposite films. The PMEO 2 MA chains experienced distinct regions of differing dynamics within Bouligand structures. A correlation was observed between the average fluorescence lifetime and the mechanical performance of CNC films, indicating that polymer chains with high mobility improved the strain and toughness. These studies demonstrated FLIM as a method to investigate polymer dynamics at the nanosecond timescale that can readily be applied to other composite systems.

Anion-exchange membranes (AEMs) consisting of poly(vinyl benzyl trimethylammonium)-b-poly(methylbutylene) of three different ion exchange capacities (IECs), 1.14, 1.64, and 2.03 mequiv g -1 , are studied by High-Resolution Thermogravimetry, Modulated Differential Scanning Calorimetry, Dynamic Mechanical Analysis, and Broadband Electrical Spectroscopy in their OH - form. The thermal stability and transitions are elucidated, showing a low temperature T g and a higher temperature transition assigned to a disorder-order transition, T δ , which depends on the IEC of the material. The electric response is analyzed in detail, allowing the identification of three polarizations (only two of which contribute significantly to the overall conductivity, σ EP and σ IP,1 ) and two dielectric relaxation events (β 1 and β 2 ), one associated with the tolyl side groups (β 1 ) and one with the cationic side chains (β 2 ). The obtained results are integrated in a coherent picture and a conductivity mechanism is proposed, involving two distinct conduction pathways, σ EP and σ IP,1 . Importantly, we observed a reordering of the ion pair dipoles which is responsible for the T δ at temperatures higher than 20 °C, which results in a dramatic decrease of the ionic conductivity. Clustering is highly implicated in the higher IEC membrane in the hydroxyl form, which reduces the efficiency of the anionic transport.

Bimetallic nanoparticles are of immense scientific and technological interest given the synergistic properties observed when two different metallic species are mixed at the nanoscale. This is particularly prevalent in catalysis, where bimetallic nanoparticles often exhibit improved catalytic activity and durability over their monometallic counterparts. Yet despite intense research efforts, little is understood regarding how to optimize bimetallic surface composition and structure synthetically using rational design principles. Recently, it has been demonstrated that peptide-enabled routes for nanoparticle synthesis result in materials with sequence-dependent catalytic properties, providing an opportunity for rational design through sequence manipulation. In this study, bimetallic PdAu nanoparticles are synthesized with a small set of peptides containing known Pd and Au binding motifs. The resulting nanoparticles were extensively characterized using high-resolution scanning transmission electron microscopy, X-ray absorption spectroscopy, and high-energy X-ray diffraction coupled to atomic pair distribution function analysis. Structural information obtained from synchrotron radiation methods was then used to generate model nanoparticle configurations using reverse Monte Carlo simulations, which illustrate sequence dependence in both surface structure and surface composition. Replica exchange with solute tempering molecular dynamics simulations were also used to predict the modes of peptide binding on monometallic surfaces, indicating that different sequences bind to the metal interfaces via different mechanisms. As a testbed reaction, electrocatalytic methanol oxidation experiments were performed, wherein differences in catalytic activity are clearly observed in materials with identical bimetallic composition. Taken together, this study indicates that peptides could be used to arrive at bimetallic surfaces with enhanced catalytic properties, which could be leveraged for rational bimetallic nanoparticle design using peptide-enabled approaches.

Understanding the structure-property relationships and the phenomena responsible for ion conduction is one of the keys in the design of novel ionomers with improved properties. In this report, the morphology and the mechanism of ion exchange in a model anion exchange membrane (AEM), poly(vinyl benzyl trimethyl ammonium bromide)-block-poly(methylbutylene) ([PVBTMA][Br]-b-PMB), is investigated with small angle X-ray scattering, high-resolution thermogravimetry, modulated differential scanning calorimetry, dynamic mechanical analysis, and broadband electrical spectroscopy. The hyper-morphology of the material consists of hydrophilic domains characterized by stacked sides of [PVBTMA][Br] which are sandwiched between "spaghetti-like" hydrophobic cylindrical parallel domains of the PMB block. The most important interactions in the hydrophilic domains occur between the dipoles of ammonium bromide ion pairs in the side chains of adjacent chains. A reordering of the ion pair dipoles is responsible for a disorder-order transition (Tδ) at high temperature, observed here for the first time in AEMs, which results in a dramatic decrease of the ionic conductivity. The overall mechanism of long range charge transfer, deduced from a congruent picture of all of the results, involves two distinct ion conduction pathways. In these pathways, hydration and the motion of the ionic side groups are crucial to the conductivity of the AEM. Unlike the typical perfluorinated sulfonated proton-conducting polymer, the segmental motion of the backbone is negligible.

Low molecular weight P2VP-b-PS-b-P2VP triblock copolymer (poly(2-vinlypyridine)-block-polystyrene-block-poly(2-vinylpyridine)] is doped with copper chloride and microphase separated into lamellar line patterns with ultrahigh area density. Salt-doped P2VP-b-PS-b-P2VP triblock copolymer is self-assembled on the top of the nanoimprinted photoresist template, and metallic nanowires with long-range ordering are prepared with platinum-salt infiltration and plasma etching., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Polystyrene- block -poly(maleimide pentafluorophenyl ester- co -styrene)- block -poly(ethylene oxide) with an o -nitrobenzyl ester junction was synthesized by "one-step" RAFT polymerization. Highly ordered and locally reactive nanoporous thin films were obtained from the photocleavable triblock copolymer after spin coating, solvent annealing, UV exposure, and washing with methanol/water to remove the minor block PEO. The local reactivity in the thin films was demonstrated by fabrication of iron oxide nanotori after post-modification with an amino-functionalized ferrocene and treatment with oxygen plasma.

A robust route for the preparation of nanoscopic line patterns from polystyrene-block-poly(ethylene oxide) featuring a photocleavable o-nitrobenzyl ester junction is demonstrated. After mild UV (λ = 365 nm) exposure and selective removal of the PEO microdomains, the polymer trench patterns are used as scaffold to fabricate highly ordered arrays of silica or Au line patterns., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A simple self-catalyzed hydroamination method for creating hybrid TiO(2)-polyaniline core-shell nanoparticles (NP) has been shown. Hybrid NPs with a range of possible sizes are afforded in high yield under mild reaction conditions and simultaneously show improved charge transport and electrochromic behavior compared to either polyaniline alone or physically blended with TiO(2)., (This journal is © The Royal Society of Chemistry 2011)

Hybrid conjugated polymers containing carborane directly bonded in the aromatic backbone repeat structure have interesting electronic bonding structures and are potentially useful new materials in organic electronics. Conjugated polymers based on o-carborane are particularly interesting for applications in sensing and detection because of the cage's unique bonding scheme and its bent geometry. Poly(fluorene) containing o-carborane displays multiple emission pathways that can be modulated through interactions with small molecules. In this paper, we report that films of poly(fluorene) with o-carborane in the backbone function as vapochromatic photoluminescent sensors toward volatile organic molecules., (© 2011 American Chemical Society)

This work examines how the binding strength of surface-immobilized "stickers" (representative of receptors or, in nonbiological systems, chemical heterogeneities) influences the adhesion between surfaces that are otherwise repulsive. The study focuses on a series of surfaces designed with fixed average adhesive energy per unit area and demonstrates quantitatively how a redistribution of the adhesive functionality into progressively larger clusters (stronger stickers) increases the probability of adhesive events. The work employs an electrostatic model system: relatively uniform, negative 1 μm silica spheres flow gently over negative silica flats. The flats contain small amounts of randomly positioned nanoscale cationic patches. The silica-silica interaction is repulsive; however, the cationic patches (present at sufficiently low levels that the overall surface charge remains substantially negative) produce local attractions. In this study, the attractions are relatively weak so that multiple patches engage to capture flowing particles. Experiments reveal an adhesion signature characteristic of a renormalized random distribution when the sticker strength is increased at an overall fixed binding strength per unit area of surface. The form of the particle capture curves are in good quantitative agreement with a simple model that assumes only a fixed adhesion energy needed for particle capture. Aside from the quantitative details that provide a simple formalism for anticipating particle adhesion, this work demonstrates how increasing the heterogeneities in the surface functionality can cause a system to go from being nonadhesive to becoming strongly adhesive. Indeed, systems containing small amounts of discretized adhesive functionality are always more adhesive than systems in which the same functionality is distributed uniformly over the surface (the mean field scenario).

Polyfluorene with p-carborane in the backbone was synthesized from the new monomer 1,12-bis(7-bromo-9,9-dihexyl-9H-fluoren-2-yl)-closo-1,12-dicarbodecaborane to give a high MW, soluble, blue-emitting material characterized by NMR, UV-vis, and fluorescence spectroscopy.

The synthesis of a novel silylcarborane acrylate monomer is reported as well as its application as an etch-resistant component for the formulation of imprint layers for UV nanoimprint lithography (NIL). By introduction of 10% by weight of the silylcarborane acrylate monomer into NIL resist formulations, the oxygen plasma etch rate of the resulting film was reduced by nearly a factor of 2. When used in NIL, the patterned resist layer had excellent oxygen plasma etch resistance, leading to effective image transfer to the underlying poly(hydroxyethyl methacrylate) lift-off layer. The latter allowed for the fabrication of metallic interdigitated electrode patterns via a NIL/lift-off process. This work demonstrates the robustness of silylcarborane-containing resists and paves the way for the investigation of new, high-resolution patterning methods.

(1)H MAS solid-state NMR methods are applied to elucidate the conduction mechanism of an anhydrous proton conducting triazole-functionalized polysiloxane. At temperatures below T = 260 K, hydrogen bonding between neighboring heterocycles is observed and a dimer formation can be excluded. From the temperature dependence of (1)H MAS NMR spectra, different dynamic processes of the triazole ring contributing to the proton conduction process are qualitatively and quantitatively analyzed and detailed insight into the conduction mechanism and temperature-dependent structural changes is obtained. Although the dynamics processes on the molecular level are qualitatively in good agreement with the findings from macroscopic conductivity measurements, temperature-dependent factors on mesoscopic scales beyond the local molecular mobility influence the macroscopic conductivity and hamper quantitative interpretation.

Antimicrobial polynorbornenes composed of facially amphiphilic monomers have been previously reported to accurately emulate the antimicrobial activity of natural host-defense peptides (HDPs). The lethal mechanism of most HDPs involves binding to the membrane surface of bacteria leading to compromised phospholipid bilayers. In this paper, the interactions between biomimetic vesicle membranes and these cationic antimicrobial polynorbornenes are reported. Vesicle dye-leakage experiments were consistent with previous biological assays and corroborated a mode of action involving membrane disruption. Dynamic light scattering (DLS) showed that these antimicrobial polymers cause extensive aggregation of vesicles without complete bilayer disintegration as observed with surfactants that efficiently solubilize the membrane. Fluorescence microscopy on vesicles and bacterial cells also showed polymer-induced aggregation of both synthetic vesicles and bacterial cells. Isothermal titration calorimetry (ITC) afforded free energy of binding values (Delta G) and polymer to lipid binding ratios, plus revealed that the interaction is entropically favorable (Delta S>0, Delta H>0). It was observed that the strength of vesicle binding was similar between the active polymers while the binding stoichiometries were dramatically different.

The regular arrangement of complementary diaminopyridine-thymine (DAP-THY) on alternating copolymers permits cooperative binding events and the effective formation of well-controlled micrometre-scale aggregates.

Amphiphilic cationic polynorbornene derivatives, soluble in water, were prepared from modular norbornene monomers, with a wide range of molecular weights (M(n) = 1600-137 500 g/mol) and narrow polydispersities (PDI = 1.1-1.3). The antibacterial activity determined by growth inhibition assays and the hemolytic activity against human red blood cells were measured and compared to determine the selectivity of the polymers for bacterial over mammalian cells. The effects of monomer repeat unit hydrophobicity and polymer molecular weight on antibacterial and hemolytic activities were determined. The hydrophobicity of the repeat unit was observed to have dramatic effects on antibacterial and hemolytic activities. Lipid membrane disruption activities of the polymers was confirmed by measuring polymer-induced dye leakage from large unilamellar vesicles. By tuning the overall hydrophobicity of the polymer through random copolymerizations of modular norbornene derivatives, highly selective, nonhemolytic antibacterial activities were obtained. For appropriate monomer composition, selectivity against bacteria versus human red blood cells was determined to be over 100.

Cadmium selenide nanoparticles, prepared by known methods, were stabilized with functional phosphine oxide 1, then used to support the polymerization of cyclic olefins radially outward from the surface by ruthenium-catalyzed ring-opening metathesis polymerization (ROMP). The conversion of compound 1 into the new metathesis catalyst 3 by carbene exchange and the subsequent polymerization of cyclic olefins were observed spectroscopically by (1)H NMR to afford for example CdSe-polycyclooctene composite 6. Transmission electron micrographs on thin films of these composites showed good nanoparticle dispersion. This is in stark contrast to the substantial nanoparticle aggregation observed when similar polymerizations were performed in the presence of conventional TOPO-covered nanoparticles. The methods reported here to prepare composite product 6 are applicable to other cyclic olefins, and suggest that this chemistry will be useful for incorporating CdSe nanoparticles into a wide variety of polymer matrices.