Search

Altermagnetic (AM) materials exhibit non-relativistic, momentum-dependent spin-split states, ushering in new opportunities for spin electronic devices. While the characteristics of spin-splitting are documented within the framework of the non-relativistic spin group symmetry, there is limited exploration of the inclusion of relativistic symmetry and its impact on the emergence of a novel spin-splitting in the band structure. This study delves into the intricate relativistic electronic structure of an AM material, α-MnTe. Employing temperature-dependent angle-resolved photoelectron spectroscopy across the AM phase transition, the emergence of a relativistic valence band splitting concurrent with the establishment of magnetic order is elucidated. This discovery is validated through disordered local moment calculations, modeling the influence of magnetic order on the electronic structure and confirming the magnetic origin of the observed splitting. The temperature-dependent splitting is ascribed to the advent of relativistic spin-splitting resulting from the strengthening of AM order in α-MnTe as the temperature decreases. This sheds light on a previously unexplored facet of this intriguing material., (© 2024 The Authors. Advanced Materials published by Wiley‐VCH GmbH.)

Coherent THz optical lattice and hybridized phonon-magnon modes are triggered by femtosecond laser pulses in the antiferromagnetic van der Waals semiconductor FePS 3 . The laser-driven lattice and spin dynamics are investigated in a bulk crystal as well as in a 380 nm-thick exfoliated flake as a function of the excitation photon energy, sample temperature and applied magnetic field. The pump-probe magneto-optical measurements reveal that the amplitude of a coherent phonon mode oscillating at 3.2 THz decreases as the sample is heated up to the Néel temperature. This signal eventually vanishes as the phase transition to the paramagnetic phase occurs, thus revealing its connection to the long-range magnetic order. In the presence of an external magnetic field, the optically triggered 3.2 THz phonon hybridizes with a magnon mode, which is utilized to excite the hybridized phonon-magnon mode optically. These findings open a pathway toward the optical control of coherent THz photo-magnonic dynamics in a van der Waals antiferromagnet, which can be scaled down to the 2D limit., (© 2022 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

Spin-resolved momentum microscopy and theoretical calculations are combined beyond the one-electron approximation to unveil the spin-dependent electronic structure of the interface formed between iron (Fe) and an ordered oxygen (O) atomic layer, and an adsorbate-induced enhancement of electronic correlations is found. It is demonstrated that this enhancement is responsible for a drastic narrowing of the Fe d-bands close to the Fermi energy (E F ) and a reduction of the exchange splitting, which is not accounted for in the Stoner picture of ferromagnetism. In addition, correlation leads to a significant spin-dependent broadening of the electronic bands at higher binding energies and their merging with satellite features, which are manifestations of a pure many-electron behavior. Overall, adatom adsorption can be used to vary the material parameters of transition metal surfaces to access different intermediate electronic correlated regimes, which will otherwise not be accessible. The results show that the concepts developed to understand the physics and chemistry of adsorbate-metal interfaces, relevant for a variety of research areas, from spintronics to catalysis, need to be reconsidered with many-particle effects being of utmost importance. These may affect chemisorption energy, spin transport, magnetic order, and even play a key role in the emergence of ferromagnetism at interfaces between non-magnetic systems., (© 2022 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

Uncommon metal oxidation states in porphyrinoid cofactors are responsible for the activity of many enzymes. The F 430 and P450nor co-factors, with their reduced Ni I - and Fe III -containing tetrapyrrolic cores, are prototypical examples of biological systems involved in methane formation and in the reduction of nitric oxide, respectively. Herein, using a comprehensive range of experimental and theoretical methods, we raise evidence that nickel tetraphenyl porphyrins deposited in vacuo on a copper surface are reactive towards nitric oxide disproportionation at room temperature. The interpretation of the measurements is far from being straightforward due to the high reactivity of the different nitrogen oxides species (eventually present in the residual gas background) and of the possible reaction intermediates. The picture is detailed in order to disentangle the challenging complexity of the system, where even a small fraction of contamination can change the scenario., Competing Interests: The authors declare no conflict of interest., (© 2022 The Authors. Angewandte Chemie published by Wiley-VCH GmbH.)

Uncommon metal oxidation states in porphyrinoid cofactors are responsible for the activity of many enzymes. The F 430 and P450nor co-factors, with their reduced Ni I - and Fe III -containing tetrapyrrolic cores, are prototypical examples of biological systems involved in methane formation and in the reduction of nitric oxide, respectively. Herein, using a comprehensive range of experimental and theoretical methods, we raise evidence that nickel tetraphenyl porphyrins deposited in vacuo on a copper surface are reactive towards nitric oxide disproportionation at room temperature. The interpretation of the measurements is far from being straightforward due to the high reactivity of the different nitrogen oxides species (eventually present in the residual gas background) and of the possible reaction intermediates. The picture is detailed in order to disentangle the challenging complexity of the system, where even a small fraction of contamination can change the scenario., (© 2022 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Molecular interfaces formed between metals and molecular compounds offer a great potential as building blocks for future opto-electronics and spintronics devices. Here, a combined theoretical and experimental spectro-microscopy approach is used to show that the charge transfer occurring at the interface between nickel tetraphenyl porphyrins and copper changes both spin and oxidation states of the Ni ion from [Ni(II), S = 0] to [Ni(I), S = 1/2]. The chemically active Ni(I), even in a buried multilayer system, can be functionalized with nitrogen dioxide, allowing a selective tuning of the electronic properties of the Ni center that is switched to a [Ni(II), S = 1] state. While Ni acts as a reversible spin switch, it is found that the electronic structure of the macrocycle backbone, where the frontier orbitals are mainly localized, remains unaffected. These findings pave the way for using the present porphyrin-based system as a platform for the realization of multifunctional devices where the magnetism and the optical/transport properties can be controlled simultaneously by independent stimuli., (© 2021 The Authors. Small published by Wiley-VCH GmbH.)

Layered van der Waals semimetallic Td-WTe2, exhibiting intriguing properties which include non-saturating extreme positive magnetoresistance (MR) and tunable chiral anomaly, has emerged as a model topological type-II Weyl semimetal system. Here, ∼45 nm thick mechanically exfoliated flakes of Td-WTe2 are studied via atomic force microscopy, Raman spectroscopy, low- T /high-μ0H magnetotransport measurements and optical reflectivity. The contribution of anisotropy of the Fermi liquid state to the origin of the large positive transverse MR⊥ and the signature of chiral anomaly of the type-II Weyl Fermions are reported. The samples are found to be stable in air and no oxidation or degradation of the electronic properties is observed. A transverse MR⊥∼1200 % and an average carrier mobility of 5000 cm2V-1s-1 at T=5K for an applied perpendicular field μ0H⊥=7T are established. The system follows a Fermi liquid model for T≤50K and the anisotropy of the Fermi surface is concluded to be at the origin of the observed positive MR. Optical reflectivity measurements confirm the anisotropy of the electronic behaviour. The relative orientation of the crystal axes and of the applied electric and magnetic fields is proven to determine the observed chiral anomaly in the in-plane magnetotransport. The observed chiral anomaly in the WTe2 flakes is found to persist up to T=120K, a temperature at least four times higher than the ones reported to date.

Quantum well (QW) heterostructures have been extensively used for the realization of a wide range of optical and electronic devices. Exploiting their potential for further improvement and development requires a fundamental understanding of their electronic structure. So far, the most commonly used experimental techniques for this purpose have been all-optical spectroscopy methods that, however, are generally averaging in momentum space. Additional information can be gained by angle-resolved photoelectron spectroscopy (ARPES), which measures the electronic structure with momentum resolution. Here we report on the use of extremely low-energy ARPES (photon energy ~ 7 eV) to increase depth sensitivity and access buried QW states, located at 3 nm and 6 nm below the surface of cubic-GaN/AlN and GaAs/AlGaAs heterostructures, respectively. We find that the QW states in cubic-GaN/AlN can indeed be observed, but not their energy dispersion, because of the high surface roughness. The GaAs/AlGaAs QW states, on the other hand, are buried too deep to be detected by extremely low-energy ARPES. Since the sample surface is much flatter, the ARPES spectra of the GaAs/AlGaAs show distinct features in momentum space, which can be reconducted to the band structure of the topmost surface layer of the QW structure. Our results provide important information about the samples' properties required to perform extremely low-energy ARPES experiments on electronic states buried in semiconductor heterostructures., (© 2021. The Author(s).)

Nonlinear metasurface holography shows the great potential of metasurfaces to control the phase, amplitude, and polarization of light while simultaneously converting the frequency of the light. The possibility of tailoring the scattering properties of a coherent beam, as well as the scattering properties of nonlinear signals originating from the meta-atoms, facilitates a huge degree of freedom in beam shaping application. Recently, several approaches showed that virtual objects or any kind of optical information can be generated at a wavelength different from the laser input beam. Here, we demonstrate a single-layer nonlinear geometric-phase metasurface made of plasmonic nanostructures for a simultaneous second- and third-harmonic generation. Different from previous works, we demonstrate a two-color hologram with dissimilar types of nanostructures that generate the color information by different nonlinear optical processes. The amplitude ratio of both harmonic signals can be adapted depending on the nanostructures' resonance as well as the power and the wavelength of the incident laser beam. The two-color holographic image is reconstructed in the Fourier space at visible wavelengths with equal amplitudes using a single near-infrared wavelength. Nonlinear holography using multiple nonlinear processes simultaneously provides an alternative path to holographic color display applications, enhanced optical encryption schemes, and multiplexed optical data storage., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

Due to its unique magnetic properties offered by the open-shell electronic structure of the central metal ion, and for being an effective catalyst in a wide variety of reactions, iron phthalocyanine has drawn significant interest from the scientific community. Nevertheless, upon surface deposition, the magnetic properties of the molecular layer can be significantly affected by the coupling occurring at the interface, and the more reactive the surface, the stronger is the impact on the spin state. Here, we show that on Cu(100), indeed, the strong hybridization between the Fe d-states of FePc and the sp-band of the copper substrate modifies the charge distribution in the molecule, significantly influencing the magnetic properties of the iron ion. The Fe II ion is stabilized in the low singlet spin state (S=0), leading to the complete quenching of the molecule magnetic moment. By exploiting the FePc/Cu(100) interface, we demonstrate that NO 2 dissociation can be used to gradually change the magnetic properties of the iron ion, by trimming the gas dosage. For lower doses, the FePc film is decoupled from the copper substrate, restoring the gas phase triplet spin state (S=1). A higher dose induces the transition from ferrous to ferric phthalocyanine, in its intermediate spin state, with enhanced magnetic moment due to the interaction with the atomic ligands. Remarkably, in this way, three different spin configurations have been observed within the same metalorganic/metal interface by exposing it to different doses of NO 2 at room temperature., (© 2020 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

The high flexibility of organic molecules offers great potential for designing the optical properties of optically active materials for the next generation of optoelectronic and photonic applications. However, despite successful implementations of molecular materials in today's display and photovoltaic technology, many fundamental aspects of the light-to-charge conversion in molecular materials have still to be uncovered. Here, we focus on the ultrafast dynamics of optically excited excitons in C 60 thin films depending on the molecular coverage and the light polarization of the optical excitation. Using time- and momentum-resolved photoemission with femtosecond extreme ultraviolet (fs-XUV) radiation, we follow the exciton dynamics in the excited states while simultaneously monitoring the signatures of the excitonic charge character in the renormalization of the molecular valence band structure. Optical excitation with visible light results in the instantaneous formation of charge-transfer (CT) excitons, which transform stepwise into Frenkel-like excitons at lower energies. The number and energetic position of the CT and Frenkel-like excitons within this cascade process are independent of the molecular coverage and the light polarization of the optical excitation. In contrast, the depopulation times of the CT and Frenkel-like excitons depend on the molecular coverage, while the excitation efficiency of CT excitons is determined by the light polarization. Our comprehensive study reveals the crucial role of CT excitons for the excited-state dynamics of homomolecular fullerene materials and thin films., Competing Interests: The authors declare no competing financial interest., (© 2020 American Chemical Society.)

The successful implementation of nanoscale materials in next generation optoelectronic devices crucially depends on our ability to functionalize and design low dimensional materials according to the desired field of application. Recently, organic adsorbates have revealed an enormous potential to alter the occupied surface band structure of tunable materials by the formation of tailored molecule-surface bonds. Here, we extend this concept of adsorption-induced surface band structure engineering to the unoccupied part of the surface band structure. This is achieved by our comprehensive investigation of the unoccupied band structure of a lead (Pb) monolayer film on the Ag(1 1 1) surface prior and after the adsorption of one monolayer of the aromatic molecule 3,4,9,10-perylene-tetracarboxylic-dianhydride (PTCDA). Using two-photon momentum microscopy, we show that the unoccupied states of the Pb/Ag(1 1 1) bilayer system are dominated by a parabolic quantum well state (QWS) in the center of the surface Brillouin zone with Pb p[Formula: see text] orbital character and a side band with almost linear dispersion showing Pb p[Formula: see text] orbital character. After the adsorption of PTCDA, the Pb side band remains completely unaffected while the signal of the Pb QWS is fully suppressed. This adsorption induced change in the unoccupied Pb band structure coincides with an interfacial charge transfer from the Pb layer into the PTCDA molecule. We propose that this charge transfer and the correspondingly vertical (partially chemical) interaction across the PTCDA/Pb interface suppresses the existence of the QWS in the Pb layer. Our results hence unveil a new possibility to orbital selectively tune and control the entire surface band structure of low dimensional systems by the adsorption of organic molecules.

Organic photovoltaic devices operate by absorbing light and generating current. These two processes are governed by the optical and transport properties of the organic semiconductor. Despite their common microscopic origin-the electronic structure-disclosing their dynamical interplay is far from trivial. Here we address this issue by time-resolved photoemission to directly investigate the correlation between the optical and transport response in organic materials. We reveal that optical generation of non-interacting excitons in a fullerene film results in a substantial redistribution of all transport levels (within 0.4 eV) of the non-excited molecules. As all observed dynamics evolve on identical timescales, we conclude that optical and transport properties are completely interlinked. This finding paves the way for developing novel concepts for transport level engineering on ultrafast time scales that could lead to novel functional optoelectronic devices.

The quest for a spin-polarized organic light-emitting diode (spin-OLED) is a common goal in the emerging fields of molecular electronics and spintronics. In this device, two ferromagnetic (FM) electrodes are used to enhance the electroluminescence intensity of the OLED through a magnetic control of the spin polarization of the injected carriers. The major difficulty is that the driving voltage of an OLED device exceeds a few volts, while spin injection in organic materials is only efficient at low voltages. The fabrication of a spin-OLED that uses a conjugated polymer as bipolar spin collector layer and ferromagnetic electrodes is reported here. Through a careful engineering of the organic/inorganic interfaces, it is succeeded in obtaining a light-emitting device showing spin-valve effects at high voltages (up to 14 V). This allows the detection of a magneto-electroluminescence (MEL) enhancement on the order of a 2.4% at 9 V for the antiparallel (AP) configuration of the magnetic electrodes. This observation provides evidence for the long-standing fundamental issue of injecting spins from magnetic electrodes into the frontier levels of a molecular semiconductor. The finding opens the way for the design of multifunctional devices coupling the light and the spin degrees of freedom., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Competing Interests: The authors declare no conflict of interest.

The miniaturization trend in the semiconductor industry has led to the understanding that interfacial properties are crucial for device behaviour. Spintronics has not been alien to this trend, and phenomena such as preferential spin tunnelling, the spin-to-charge conversion due to the Rashba-Edelstein effect and the spin-momentum locking at the surface of topological insulators have arisen mainly from emergent interfacial properties, rather than the bulk of the constituent materials. In this Perspective we explore inorganic/molecular interfaces by looking closely at both sides of the interface. We describe recent developments and discuss the interface as an ideal platform for creating new spin effects. Finally, we outline possible technologies that can be generated thanks to the unique active tunability of molecular spinterfaces.

The evolution of the electronic band structure of the simple ferromagnets Fe, Co, and Ni during their well-known ferromagnetic-paramagnetic phase transition has been under debate for decades, with no clear and even contradicting experimental observations so far. Using time- and spin-resolved photoelectron spectroscopy, we can make a movie on how the electronic properties change in real time after excitation with an ultrashort laser pulse. This allows us to monitor large transient changes in the spin-resolved electronic band structure of cobalt for the first time. We show that the loss of magnetization is not only found around the Fermi level, where the states are affected by the laser excitation, but also reaches much deeper into the electronic bands. We find that the ferromagnetic-paramagnetic phase transition cannot be explained by a loss of the exchange splitting of the spin-polarized bands but instead shows rapid band mirroring after the excitation, which is a clear signature of extremely efficient ultrafast magnon generation. Our result helps to understand band structure formation in these seemingly simple ferromagnetic systems and gives first clear evidence of the transient processes relevant to femtosecond demagnetization.

Recently, research has revealed that molecules can be used to steer the local spin properties of ferromagnetic surfaces. One possibility to manipulate ferromagnetic-metal-molecule interfaces in a controlled way is to synthesize specific, non-magnetic molecules to obtain a desired interaction with the ferromagnetic substrate. Here, we have synthesized derivatives of the well-known semiconductor Alq 3 (with q = 8-hydroxyquinolinate), in which the 8-hydroxyquinolinate ligands are partially or completely replaced by similar ligands bearing O- or N-donor sets. The goal of this study was to investigate how the presence of (i) different donor atom sets and (ii) aromaticity in different conjugated π-systems influences the spin properties of the metal-molecule interface formed with a Co(100) surface. The spin-dependent metal-molecule-interface properties have been measured by spin-resolved photoemission spectroscopy, backed up by DFT calculations. Overall, our results show that, in the case of the Co-molecule interface, chemical synthesis of organic ligands leads to specific electronic properties of the interface, such as exciton formation or highly spin-polarized interface states. We find that these properties are even additive, i.e. they can be engineered into one single molecular system that incorporates all the relevant ligands.

Spin filtering at organic-metal interfaces is often determined by the details of the interaction between the organic molecules and the inorganic magnets used as electrodes. Here we demonstrate a spin-filtering mechanism based on the dynamical spin relaxation of the long-living interface states formed by the magnet and weakly physisorbed molecules. We investigate the case of Alq3 on Co and, by combining two-photon photoemission experiments with electronic structure theory, show that the observed long-time spin-dependent electron dynamics is driven by molecules in the second organic layer. The interface states formed by physisorbed molecules are not spin-split, but acquire a spin-dependent lifetime, that is the result of dynamical spin-relaxation driven by the interaction with the Co substrate. Such spin-filtering mechanism has an important role in the injection of spin-polarized carriers across the interface and their successive hopping diffusion into successive molecular layers of molecular spintronics devices.

Hybridization-related modifications of the first metal layer of a metal-organic interface are difficult to access experimentally and have been largely neglected so far. Here, we study the influence of specific chemical bonds (as formed by the organic molecules CuPc and PTCDA) on a Pb-Ag surface alloy. We find that delocalized van der Waals or weak chemical π-type bonds are not strong enough to alter the alloy, while localized σ-type bonds lead to a vertical displacement of the Pb surface atoms and to changes in the alloy's surface band structure. Our results provide an exciting platform for tuning the Rashba-type spin texture of surface alloys using organic molecules.

We reveal an explicit strategy to design the magneto-optic response of a magneto-plasmonic crystal by correlating near- and far-fields effects. We use photoemission electron microscopy to map the spatial distribution of the electric near-field on a nanopatterned magnetic surface that supports plasmon polaritons. By using different photon energies and polarization states of the incident light we reveal that the electric near-field is either concentrated in spots forming a hexagonal lattice with the same symmetry as the Ni nanopattern or in stripes oriented along the Γ-K direction of the lattice and perpendicular to the polarization direction. We show that the polarization-dependent near-field enhancement on the patterned surface is directly correlated to both the excitation of surface plasmon polaritons on the patterned surface as well as the enhancement of the polar magneto-optical Kerr effect. We obtain a relationship between the size of the enhanced magneto-optical behavior and the polarization and wavelength of optical excitation. The engineering of the magneto-optic response based on the plasmon-induced modification of the optical properties introduces the concept of a magneto-plasmonic meta-structure.

Gold surfaces host special electronic states that have been understood as a prototype of Shockley surface states. These surface states are commonly employed to benchmark the capability of angle-resolved photoemission spectroscopy (ARPES) and scanning tunnelling spectroscopy. Here we show that these Shockley surface states can be reinterpreted as topologically derived surface states (TDSSs) of a topological insulator (TI), a recently discovered quantum state. Based on band structure calculations, the Z2-type invariants of gold can be well-defined to characterize a TI. Further, our ARPES measurement validates TDSSs by detecting the dispersion of unoccupied surface states. The same TDSSs are also recognized on surfaces of other well-known noble metals (for example, silver, copper, platinum and palladium), which shines a new light on these long-known surface states.

We present a rational design approach to customize the spin texture of surface states of a topological insulator. This approach relies on the extreme multifunctionality of organic molecules that are used to functionalize the surface of the prototypical topological insulator (TI) Bi2Se3. For the rational design we use theoretical calculations to guide the choice and chemical synthesis of appropriate molecules that customize the spin texture of Bi2Se3. The theoretical predictions are then verified in angular-resolved photoemission experiments. We show that, by tuning the strength of molecule-TI interaction, the surface of the TI can be passivated, the Dirac point can energetically be shifted at will, and Rashba-split quantum-well interface states can be created. These tailored interface properties-passivation, spin-texture tuning, and creation of hybrid interface states-lay a solid foundation for interface-assisted molecular spintronics in spin-textured materials.

Ultraviolet photoemission spectroscopy (UPS) is a powerful tool to study the electronic spin and symmetry features at both surfaces and interfaces to ultrathin top layers. However, the very low mean free path of the photoelectrons usually prevents a direct access to the properties of buried interfaces. The latter are of particular interest since they crucially influence the performance of spintronic devices like magnetic tunnel junctions (MTJs). Here, we introduce spin-resolved extremely low energy photoemission spectroscopy (ELEPS) to provide a powerful way for overcoming this limitation. We apply ELEPS to the interface formed between the half-metallic Heusler compound Co2MnSi and the insulator MgO, prepared as in state-of-the-art Co2MnSi/MgO-based MTJs. The high accordance between the spintronic fingerprint of the free Co2MnSi surface and the Co2MnSi/MgO interface buried below up to 4 nm MgO provides clear evidence for the high interface sensitivity of ELEPS to buried interfaces. Although the absolute values of the interface spin polarization are well below 100%, the now accessible spin- and symmetry-resolved wave functions are in line with the predicted existence of non-collinear spin moments at the Co2MnSi/MgO interface, one of the mechanisms evoked to explain the controversially discussed performance loss of Heusler-based MTJs at room temperature.

We investigate the ultrafast demagnetization for two Heusler alloys (Co₂Mn(1-x)FexSi) with a different lineup of the minority band gap and the Fermi level. Even though electronic spin-flip transitions are partially blocked by the band gap in one compound, the respective magnetization dynamics, as measured by the time-resolved Kerr effect, are remarkably similar. Based on a dynamical model that includes momentum and spin-dependent carrier scattering, we show that the magnetization dynamics are dominated by hole spin-flip processes, which are not influenced by the gap.

We employ a recently developed purpose-made technique based on spin-resolved two-photon photoemission spectroscopy to study the influence of alkali-metal doping (Cs and Na) on the spin functionality of the interface between a cobalt thin film and the organic semiconductor copper phthalocyanine. We find two alkali-metal-induced effects. First, alkali-metal atoms act as impurities and increase the spin-flip probability for the electrons crossing the interface (detrimental effect). Second, they allow one to modify the interface energy level alignment and, consequently, to enhance the efficiency of spin injection at an arbitrary energy above the Fermi level of the cobalt (intrinsic effect). We show that the intrinsic effect dominates over the detrimental one, opening the possibility to actively tailor the spin functionality of the considered hybrid metal-organic interface by changing the doping concentration.

A fundamental prerequisite for the implementation of organic semiconductors (OSCs) in spintronics devices is the still missing basic knowledge about spin injection and transport in OSCs. Here, we consider a model system consisting of a high-quality interface between the ferromagnet cobalt and the OSC copper phthalocyanine (CuPc). We focus on interfacial effects on spin injection and on the spin transport properties of CuPc. Using spin-resolved two-photon photoemission, we have measured directly and in situ the efficiency of spin injection at the cobalt-CuPc interface. We report a spin injection efficiency of 85-90% for injection into unoccupied molecular orbitals of CuPc. Moreover, we estimate an electron inelastic mean free path in CuPc in the range of 1 nm and a 10-30 times higher quasi-elastic spin-flip length. We demonstrate that quasi-elastic spin-flip processes with energy loss < or = 200 meV are the dominant microscopic mechanism limiting the spin diffusion length in CuPc.