Search

This Letter proposes a holographic cylindrical vector beam converter (HCVBC) design that incorporates a continuously polarization-selective volume hologram circular-grating. A specially designed truncated cone prism is adopted for recording, which is conducted with a single incident, expanded, radially polarized beam. A prototype of this HCVBC was recorded and tested successfully. This design has the advantages of high diffraction efficiency, a narrow band, compactness, and planar configuration; thus, it is especially suitable for low-cost mass production and has high potential for application in related fields.

The proposed total internal reflection (TIR)-based technique can be used for measuring the refractive index of lenses. Distribution of the phase difference between the s - and p -polarization states of the reflected light induced by TIR can be obtained by a polarization camera. The refractive index of the lens can be determined from the detected maximum phase difference, with the specific measurement equation. Only the maximum phase difference needs to be measured. Information about the incident angle, thickness of the lens, and the matching liquid is not needed. The experimental results demonstrate that the resolution of the system can reach 4.8×10 -4 R I U .

A polyaniline (PANI)/tin oxide (SnO₂) composite for a CO sensor was fabricated using a composite film composed of SnO₂ nanoparticles and PANI deposition in the present study. Tin oxide nanoparticles were synthesized by the sol-gel method. The SnO₂ nanoparticles provided a high surface area to significantly enhance the response to the change in CO concentration at low operating temperature (<75 °C). The excellent sensor response was mainly attributed to the relatively good properties of PANI in the redox reaction during sensing, which produced a great resistance difference between the air and CO gas at low operating temperature. Therefore, the combination of n -type SnO₂ nanoparticles with a high surface area and a thick film of conductive PANI is an effective strategy to design a high-performance CO gas sensor.

We propose a prism-hologram-prism sandwiched recording method for the fabrication of polarization-selective substrate-mode volume holograms with a large diffraction angle. In fabrication, the C-RT20 photopolymer is sandwiched between two 45°-90°-45° prisms and the interference fringes can be easily recorded in the recording material. The experimental results are in good agreement with the theoretical predictions. The proposed method features of a reflection-type recording setup for a transmission element and belongs to a technique of longer-wavelength construction for shorter-wavelength reconstruction. In addition, the method is much easier than the traditional recording method of two incident beam interference and has application potential in holographic photonics.

In this study, a novel moiré fringe analysis technique is proposed for measuring the surface profile of an object. After applying a relative displacement between two gratings at a constant velocity, every pixel of CMOS camera can capture a heterodyne moiré signal. The precise phase distribution of the moiré fringes can be extracted using a one-dimensional fast Fourier transform (FFT) analysis on every pixel, simultaneously filtering the harmonic noise of the moiré fringes. Finally, the surface profile of the tested objected can be generated by substituting the phase distribution into the relevant equation. The findings demonstrate the feasibility of this measuring method, and the measurement error was approximately 4.3 μm. The proposed method exhibits the merits of the Talbot effect, projection moiré method, FFT analysis, and heterodyne interferometry.

Optical circulators are necessary passive devices applied in optical communication systems. In the design of optical circulators, the implementation of the function of spatial walk-off polarizers is a key technique that significantly influences the performance and cost of a device. This paper proposes a design of a multiport optical circulator by using polarizing beam splitter cubes as spatial walk-off polarizers. To show the feasibility of the design, a prototype of a six-port optical circulator was fabricated. The insertion losses are 0.94-1.49 dB, the isolations are 25-51 dB, and return losses are 27.72 dB.

This work proposes a simple method, based on the crystal rotation technique and heterodyne interferometry, to simultaneously determine the pretilt angle and cell gap of nematic liquid crystal cells. When heterodyne light passes through a nematic liquid crystal cell, the phase retardation given by the characteristic parameters of the cell can be measured accurately by heterodyne interferometry. This phase retardation relates to the pretilt angle, cell gap, and angle of incidence on the cell. By using the measured phase retardations at two incident angles, the pretilt angle and cell gap of the nematic liquid crystal cell can be estimated by numerical analysis. This method is feasible, requiring only two incident angles and prior knowledge of two characteristic parameters--extraordinary and ordinary refractive indices of the liquid crystal. It is characterized by the advantages of simplicity of installation, ease of operation, high stability, high accuracy, and high resolution.

Based on the phenomena of Brewster's angle and the principles of common-path heterodyne interferometry, we present an optical method for measuring the optical rotation angle and the refractive index of a chiral solution simultaneously in one optical configuration. A heterodyne light beam and a circularly polarized heterodyne light beam are separately guided to project onto the interface of a semicircle glass and a chiral solution. One of the beams is transmitted through the solution, and the other is reflected near Brewster's angle at the interface. Then the two beams pass through polarization components respectively for interference. The phase differences of the two interference signals used to determine the rotation angle and the refractive index become very high with the proper azimuth angles of some polarization components, hence achieving an accurate rotational angle and a refractive index. The feasibility of the measuring method was demonstrated by our experimental results. This method should bear the merits of high accuracy, short sample medium length, and simpler operational endeavor.

Based on the flexibilities of light beam propagation in three dimensions, we propose an improved N-port optical quasi-circulator by using a pair of orthogonal holographic spatial- and polarization- modules. All optical elements are located in parallel planes that are perpendicular to the optical axis. The number of optical elements is decreased, and a higher performance optical quasi-circulator without crosstalk and polarization mode dispersion can be easily achieved. A prototype of 5-port polarizationindependent optical quasi-circulator operating at a wavelength of 1300nm was assembled and tested to show its validities.

In this paper we proposed an alternative type of multi-port polarization-independent optical quasi-circulator by using a pair of holographic spatial- and polarization- modules. The prototype is fabricated and experimentally tested. In addition, the operating principles, the characteristics and the performances of this device are discussed. The merits of this design include polarization-independence, compactness, high isolation, low polarization mode dispersion, and easy fabrication. Furthermore, the number of ports can be scaled up easily.

Based on the coupled-wave theory, a holographic spatial walk-off polarizer (HSWP) is designed. This HSWP is a transmission-type phase volume holographic grating on a substrate and its optical recording geometry can be derived from Chen's corrected methodology with a desired reconstruction condition. A pair of fabricated HSWPs with the splitting angle of 60 degrees is applied to assemble a new type of 4-port polarizationindependent optical circulator. The operating principles and the characteristics of the proposed HSWP and the prototype optical circulator are discussed.

Objectives: To evaluate the impairment of fenvalerate on reproductive and endocrine systems and clarify the mechanism of action., Methods: Different doses of fenvalerate (0, 2, 4, 12, 60 mg/kg) were orally treated to the adult male SD rats for 15 days and 30 days, respectively. The levels of serum follicle stimulating hormone(FSH), luteinizing hormone (LH), testosterone(T) and testis homogenate T were determined by radioimmunoassay(RIA). Besides, the activity of testicular marked enzymes such as acid phosphatases(ACP) and gamma-glutamyl transpeptidase(gamma-GT) were examined, and sperm head counts were measured to explain the changes of daily sperm production(Spr)., Results: In fifteen days, serum FSH levels markedly increased in rats exposed to fenvalerate of < or = 12 mg/kg groups(P < 0.01) and serum levels of LH increased in 12 mg/kg group(P < 0.01). In addition, T levels in testis homogenates decreased after treated with the doses of > or = 12 mg/kg groups compared with the control group(P < 0.01). In thirty days, serum contents of FSH were significantly elevated in the doses of > or = 12 mg/kg groups(P < 0.01) and homogenate levels of T were diminished in the low dose group(2.4 mg/kg) (P < 0.05). Activity of ACP increased in 12 mg/kg group after fifteen days(P < 0.05) and was restrained in the high dose group(60 mg/kg) in thirty days(P < 0.05), but the contents of gamma-GT were arrested with different doses dependently in the testis(P < 0.05). Fenvalerate caused dose-dependent reduction in sperm head counts and daily sperm production, which markedly reduced at the doses of > or = 12 mg/kg groups(P < 0.01)., Conclusions: Fenvalerate has obvious reproductive toxicity on male rats and can change their serum and testis homogenate levels of sex hormone or activity of testicular marked enzymes, which may be correlated with the impairment of Sertoli cell and spermatogenic epithelium.