Search

Crystallography is an invaluable tool in materials science, solid state physics and protein science. Understanding crystallography requires grasping the powerful but abstract concept of reciprocal space. Here a simple but insightful experiment using a laser pointer and Au microdisc arrays to explore and illustrate Bragg diffraction and reciprocal space is demonstrated. The Au microdisc arrays were manufactured using standard semiconductor fabrication techniques. The flexibility of the array design allows the demonstration of basic concepts such as lattice and atomic form factor, but also more advanced ones such as quasicrystal and shape function., (© Lert Chayanun et al. 2022.)

Coherent X-ray imaging techniques, such as in-line holography, exploit the high brilliance provided by diffraction-limited storage rings to perform imaging sensitive to the electron density through contrast due to the phase shift, rather than conventional attenuation contrast. Thus, coherent X-ray imaging techniques enable high-sensitivity and low-dose imaging, especially for low-atomic-number (Z) chemical elements and materials with similar attenuation contrast. Here, the first implementation of in-line holography at the NanoMAX beamline is presented, which benefits from the exceptional focusing capabilities and the high brilliance provided by MAX IV, the first operational diffraction-limited storage ring up to approximately 300 eV. It is demonstrated that in-line holography at NanoMAX can provide 2D diffraction-limited images, where the achievable resolution is only limited by the 70 nm focal spot at 13 keV X-ray energy. Also, the 3D capabilities of this instrument are demonstrated by performing holotomography on a chalk sample at a mesoscale resolution of around 155 nm. It is foreseen that in-line holography will broaden the spectra of capabilities of MAX IV by providing fast 2D and 3D electron density images from mesoscale down to nanoscale resolution., (open access.)

Using multilayer zone plates (MZPs) as two-dimensional optics, focal spot sizes of less than 10 nm can be achieved, as we show here with a focus of 8.4 nm × 9.6 nm, but the need for order-sorting apertures prohibits practical working distances. To overcome this issue, here an off-axis illumination of a circular MZP is introduced to trade off between working distance and focal spot size. By this, the working distance between order-sorting aperture and sample can be more than doubled. Exploiting a 2D focus of 16 nm × 28 nm, real-space 2D mapping of local electric fields and charge carrier recombination using X-ray beam induced current in a single InP nanowire is demonstrated. Simulations show that a dedicated off-axis MZP can reach sub-10 nm focusing combined with reasonable working distances and low background, which could be used for in operando imaging of composition, carrier collection and strain in nanostructured devices., (open access.)

Nanoscale X-ray detectors could allow higher resolution in imaging and diffraction experiments than established systems but are difficult to design due to the long absorption length of X-rays. Here, we demonstrate X-ray detection in a single nanowire in which the nanowire axis is parallel to the optical axis. In this geometry, X-ray absorption can occur along the nanowire length, while the spatial resolution is limited by the diameter. We use the device to make a high-resolution 3D image of the 88 nm diameter X-ray nanofocus at the Nanomax beamline, MAX IV synchrotron, by scanning the single pixel device in different planes along the optical axis. The images reveal fine details of the beam that are unattainable with established detectors and show good agreement with ptychography.

Here it is demonstrated how nanofocused X-ray beam induced current (XBIC) can be used to quantitatively map the spatially dependent carrier collection probability within nanostructured solar cells. The photocurrent generated by a 50 nm-diameter X-ray beam was measured as a function of position, bias and flux in single p-i-n doped solar-cell nanowires. The signal gathered mostly from the middle segment decays exponentially toward the p- and n-segments, with a characteristic decay length that varies between 50 nm and 750 nm depending on the flux and the applied bias. The amplitude of the XBIC shows saturation at reverse bias, which indicates that most carriers are collected. At forward bias, the relevant condition for solar cells, the carrier collection is only efficient in a small region. Comparison with finite element modeling suggests that this is due to unintentional p-doping in the middle segment. It is expected that nanofocused XBIC could be used to investigate carrier collection in a wide range of nanostructured solar cells., (open access.)

We demonstrate x-ray absorption fine structure spectroscopy (XAFS) detected by x-ray beam induced current (XBIC) in single n + -i-n + doped nanowire devices. Spatial scans with the 65 nm diameter beam show a peak of the XBIC signal in the middle segment of the nanowire. The XBIC and the x-ray fluorescence signals were detected simultaneously as a function of the excitation energy near the Ga K absorption edge at 10.37 keV. The spectra show similar oscillations around the edge, which shows that the XBIC is limited by the primary absorption. Our results reveal the feasibility of the XBIC detection mode for the XAFS investigation in nanostructured devices.

The properties of semiconductors can be controlled using doping, making it essential for electronic and optoelectronic devices. However, with shrinking device sizes it becomes increasingly difficult to quantify doping with sufficient sensitivity and spatial resolution. Here, we demonstrate how X-ray fluorescence mapping with a nanofocused beam, nano-XRF, can quantify Zn doping within in situ doped III-V nanowires, by using large area detectors and high-efficiency focusing optics. The spatial resolution is defined by the focus size to 50 nm. The detection limit of 7 ppm (2.8 × 10 17 cm -3 ), corresponding to about 150 Zn atoms in the probed volume, is bound by a background signal. In solar cell InP nanowires with a p-i-n doping profile, we use nano-XRF to observe an unintentional Zn doping of 5 × 10 17 cm -3 in the middle segment. We investigated the dynamics of in situ Zn doping in a dedicated multisegment nanowire, revealing significantly sharper gradients after turning the Zn source off than after turning the source on. Nano-XRF could be used for quantitative mapping of a wide range of dopants in many types of nanostructures.