Search

A facile method for preparing hierarchical carbon composites that contain activated carbon (AC), carbon nanospheres (CNSs), and carbon nanotubes (CNTs) for use as the electrode material in supercapacitors (SCs) was developed. The CNS/CNT network enabled the formation of three-dimensional conducting pathways within the highly porous AC matrix, effectively reducing the internal resistance of an SC electrode. The specific capacitance, cyclability, voltage window, temperature profile during charging/discharging, leakage current, gas evolution, and self-discharge of the fabricated SCs were systematically investigated and the optimal CNS/CNT ratio was determined. A 2.5 V floating aging test at 70 °C was performed on SCs made with various hierarchical carbon electrodes. Electrochemical impedance spectroscopy, postmortem electron microscopy, Raman spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy analyses were conducted to examine the electrode aging behavior. A hierarchical carbon architecture with an appropriate AC/CNS/CNT constituent ratio could significantly improve charge-discharge performance, increase cell reliability, and decrease the aging-related degradation rate., (© 2022 Wiley-VCH GmbH.)

Lots of lithium ion battery (LIB) products contain lithium metal oxide LiNi 5 Co 2 Mn 3 O 2 (LNCM) as the positive electrode's active material. The stable surface of this oxide results in high resistivity in the battery. For this reason, conductive carbon-based materials, including acetylene black and carbon black, become necessary components in electrodes. Recently, carbon nano-tube (CNT) has appeared as a popular choice for the conductive carbon in LIB. However, a large quantity of the conductive carbon, which cannot provide capacity as the active material, will decrease the energy density of batteries. The ultra-high cost of CNT, compared to conventional carbon black, is also a problem. In this work, we are going to introduce long-length carbon nano-tube s(L-CNT) into electrodes in order to design a reduced-amount conductive carbon electrode. The whole experiment will be done in a 1Ah commercial type pouch LIB. By decreasing conductive carbon as well as increasing the active material in the positive electrode, the energy density of the LNCM-based 1Ah pouch type LIB, with only 0.16% of L-CNT inside the LNCM positive electrode, could reach 224 Wh/kg and 549 Wh/L, in weight and volume energy density, respectively. Further, this high energy density LIB with L-CNT offers stable cyclability, which may constitute valuable progress in portable devices and electric vehicle (EV) applications.