Search

This Minireview examines a selection of case studies that showcase distinctive and enabling electrochemical approaches that have allowed for the generation and reaction of carbocation intermediates under mild conditions. Particular emphasis is placed on the progress that has been made in this area of organic synthesis and polymer chemistry over the past decade., (© 2024 The Author(s). Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

The use of dissolving metal electrodes for the direct electrochemical synthesis of metal complexes has been used widely in the last decade. A major benefit of the electrochemical approach is the minimal by-products resulting from the synthesis. As such, metal complexes can be produced on-demand and used directly in catalysis without the need for purification. Furthermore, the electrochemical method enables the production of metal complexes that cannot be synthesized using other methods, including those with base-sensitive ligands. General principles of the electrochemical method and recent advances in the field are discussed., (© 2024 Wiley‐VCH GmbH.)

The modification of polymer surfaces using laser light is important for many applications in the nano-, bio- and chemical sciences. Such capabilities have supported advances in biomedical devices, electronics, information storage, microfluidics, and other applications. In most cases, these modifications require high power lasers that are expensive and require specialized equipment and facilities to minimize risk of hazardous radiation. Additionally, polymer systems that can be easily modified by lasers are often complex and costly to prepare. In this report, these challenges are addressed with the discovery of low-cost sulfur copolymers that can be rapidly modified with lasers emitting low-power infrared and visible light. The featured copolymers are made from elemental sulfur and either cyclopentadiene or dicyclopentadiene. Using a suite of lasers with discreet wavelengths (532, 638 and 786 nm) and powers, a variety of surface modifications could be made on the polymers such as controlled swelling or etching via ablation. The facile synthesis and laser modification of these polymer systems were exploited in applications such as direct laser lithography and erasable information storage., (© 2024 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

An electrochemical synthesis of gold(I)-N-heterocyclic carbene (Au-NHC) complexes has been developed. The electrochemical methodology uses only imidazolium salts, gold metal electrodes, and electricity to produce these complexes with hydrogen gas as the only by-product. This high-yielding and operationally simple procedure has been used to produce eight mononuclear and three dinuclear Au-NHC complexes. The electrochemical procedure facilitates a clean reaction with no by-products. As such, Au-NHC complexes can be directly transferred to catalytic reactions without work-up or purification. The Au-NHC complexes were produced on-demand and tested as catalysts in a vinylcyclopropanation reaction. All mononuclear Au-NHC complexes performed similarly to or better than the isolated complexes., (© 2023 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

The emergence of more virulent and epidemic strains of viruses, especially in the context of COVID-19, makes it more important than ever to improve methods of decontamination. The objective of this study was to evaluate the potential of on-demand production of chlorine species to inactivate human coronaviruses. The commercial prototype disinfection unit was provided by Unipolar Water Technologies. The Unipolar device generates active chlorine species using an electrochemical reaction and dispenses the disinfectant vapour onto surfaces with an aspirator. The minimum effective concentration and exposure time of disinfectant were evaluated on human hepatoma (Huh7) cells using 50% tissue culture infectious dose (TCID 50 ) assay and human coronavirus 229E (HCoV-229E), a surrogate for pathogenic human coronaviruses. We showed that chlorine species generated in the Unipolar device inactivate HCoV-229E on glass surfaces at ≥ 400 parts per million active chlorine concentration with a 5 min exposure time. Here, inactivation refers to the inability of the virus to infect the Huh7 cells. Importantly, no toxic effect was observed on Huh7 cells for any of the active chlorine concentrations and contact times tested., (© 2023. The Author(s).)

With increasing interest in high sulfur content polymers, there is a need to develop new methods for their synthesis that feature improved safety and control of structure. In this report, electrochemically initiated ring-opening polymerization of norbornene-based cyclic trisulfide monomers delivered well-defined, linear poly(trisulfides), which were solution processable. Electrochemistry provided a controlled initiation step that obviates the need for hazardous chemical initiators. The high temperatures required for inverse vulcanization are also avoided resulting in an improved safety profile. Density functional theory calculations revealed a reversible "self-correcting" mechanism that ensures trisulfide linkages between monomer units. This control over sulfur rank is a new benchmark for high sulfur content polymers and creates opportunities to better understand the effects of sulfur rank on polymer properties. Thermogravimetric analysis coupled with mass spectrometry revealed the ability to recycle the polymer to the cyclic trisulfide monomer by thermal depolymerization. The featured poly(trisulfide) is an effective gold sorbent, with potential applications in mining and electronic waste recycling. A water-soluble poly(trisulfide) containing a carboxylic acid group was also produced and found to be effective in the binding and recovery of copper from aqueous media.

In this study, we have demonstrated a bioprocessing approach encompassing the exogenous addition of low-molecular-weight compounds to tune the fatty acid (FA) profile in a novel thraustochytrid strain to produce desirable FAs. Maximum lipid recovery (38%, dry wt. biomass) was obtained at 1% Tween 80 and 0.25 mg/L of Vitamin B12. The transesterified lipid showed palmitic acid (C16, 35.7% TFA), stearic acid (C18, 2.1% TFA), and oleic acid (C18:1, 18.7% TFA) as the main components of total FAs, which are mainly present in plant oils. Strikingly, D-limonene addition in the fermentation medium repressed the production of polyunsaturated fatty acid (PUFAs). Sulfur-polymerization-guided lipid separation revealed the presence of saturated (SFAs, 53% TFA) and monounsaturated fatty acids (MUFAs, 46.6% TFA) in thraustochytrid oil that mimics plant-oil-like FA profiles. This work is industrially valuable and advocates the use of sulfur polymerization for preparation of plant-like oils through tuneable thraustochytrid lipids.

A polymer made from sulfur and limonene was used to coat silica gel and then evaluated as a mercury sorbent. A kinetic model of mercury uptake was established for a range of pH values and concentrations of sodium chloride. Mercury uptake was generally rapid from pH = 3 to pH = 11. At neutral pH, the sorbent (500 mg with a 10 : 1 ratio of silica to polymer) could remove 90% of mercury within one minute from a 100 mL solution containing 5 ppm HgCl 2 and 99% over 5 minutes. It was found that sodium chloride, at concentrations comparable to seawater, dramatically reduced mercury uptake rates and capacity. It was also found that the spent sorbent was stable in acidic and neutral media, but degraded at pH 11 which led to mercury leaching. These results help define the conditions under which the sorbent could be used, which is an important advance for using this material in remediation processes.

Schizophrenia is a complex and severe mental illness. Current treatments for schizophrenia typically modulate dopaminergic neurotransmission by D 2 -receptor blockade. While reducing positive symptoms of schizophrenia, current antipsychotic drugs have little clinical effect on negative symptoms and cognitive impairments. For the last few decades, discovery efforts have sought nondopaminergic compounds with the aim to effectively treat the broad symptoms of schizophrenia. In this viewpoint, we provide an overview on trace-amine associated receptor-1 (TAAR1), which presents a clinically validated nondopaminergic target for treating schizophrenia and related disorders, with significantly less overall side-effect burden. TAAR1 agonists may also be specifically beneficial for the substance abuse comorbidity and metabolic syndrome that is often present in patients with schizophrenia., Competing Interests: The authors declare no competing financial interest., (© 2022 American Chemical Society.)

Mixing immiscible liquids typically requires the use of auxiliary substances including phase transfer catalysts, microgels, surfactants, complex polymers and nano-particles and/or micromixers. Centrifugally separated immiscible liquids of different densities in a 45° tilted rotating tube offer scope for avoiding their use. Micron to submicron size topological flow regimes in the thin films induce high inter-phase mass transfer depending on the nature of the two liquids. A hemispherical base tube creates a Coriolis force as a 'spinning top' (ST) topological fluid flow in the less dense liquid which penetrates the denser layer of liquid, delivering liquid from the upper layer through the lower layer to the surface of the tube with the thickness of the layers determined using neutron imaging. Similarly, double helical (DH) topological flow in the less dense liquid, arising from Faraday wave eddy currents twisted by Coriolis forces, impact through the less dense liquid onto the surface of the tube. The lateral dimensions of these topological flows have been determined using 'molecular drilling' impacting on a thin layer of polysulfone on the surface of the tube and self-assembly of nanoparticles at the interface of the two liquids. At high rotation speeds, DH flow also occurs in the denser layer, with a critical rotational speed reached resulting in rapid phase demixing of preformed emulsions of two immiscible liquids. ST flow is perturbed relative to double helical flow by changing the shape of the base of the tube while maintaining high mass transfer between phases as demonstrated by circumventing the need for phase transfer catalysts. The findings presented here have implications for overcoming mass transfer limitations at interfaces of liquids, and provide new methods for extractions and separation science, and avoiding the formation of emulsions., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The pursuit of simple, yet fair, unbiased, and objective measures of researcher performance has occupied bibliometricians and the research community as a whole for decades. However, despite the diversity of available metrics, most are either complex to calculate or not readily applied in the most common assessment exercises (e.g., grant assessment, job applications). The ubiquity of metrics like the h-index (h papers with at least h citations) and its time-corrected variant, the m-quotient (h-index ÷ number of years publishing) therefore reflect the ease of use rather than their capacity to differentiate researchers fairly among disciplines, career stage, or gender. We address this problem here by defining an easily calculated index based on publicly available citation data (Google Scholar) that corrects for most biases and allows assessors to compare researchers at any stage of their career and from any discipline on the same scale. Our ε'-index violates fewer statistical assumptions relative to other metrics when comparing groups of researchers, and can be easily modified to remove inherent gender biases in citation data. We demonstrate the utility of the ε'-index using a sample of 480 researchers with Google Scholar profiles, stratified evenly into eight disciplines (archaeology, chemistry, ecology, evolution and development, geology, microbiology, ophthalmology, palaeontology), three career stages (early, mid-, late-career), and two genders. We advocate the use of the ε'-index whenever assessors must compare research performance among researchers of different backgrounds, but emphasize that no single index should be used exclusively to rank researcher capability., Competing Interests: The authors declare no competing interests.

A polymer made from equal masses of sulfur and canola oil was carbonised at 600 °C for 30 minutes. The resulting material exhibited improved uptake of mercury from water compared to the polymer. The carbonisation could also be done after using the polymer to clean up oil spills, which suprisingly improved mercury uptake to levels rivaling commercial carbons.

The ability to radiolabel proteins with [ 18 F]fluoride enables the use of positron emission tomography (PET) for the early detection, staging and diagnosis of disease. The direct fluorination of native proteins through C-F bond formation is, however, a difficult task. The aqueous environments required by proteins severely hampers fluorination yields while the dry, organic solvents that promote nucleophilic fluorination can denature proteins. To circumvent these issues, indirect fluorination methods making use of prosthetic groups that are first fluorinated and then conjugated to a protein have become commonplace. But, when it comes to the radiofluorination of proteins, these indirect methods are not always suited to the short half-life of the fluorine-18 radionuclide (110 min). This review explores radiofluorination through bond formation with fluoride at boron, metal complexes, silicon, phosphorus and sulfur. The potential for these techniques to be used for the direct, aqueous radiolabeling of proteins with [ 18 F]fluoride is discussed., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Scroggie, Perkins and Chalker.)

An insulating composite was made from the sustainable building blocks wool, sulfur, and canola oil. In the first stage of the synthesis, inverse vulcanization was used to make a polysulfide polymer from the canola oil triglyceride and sulfur. This polymerization benefits from complete atom economy. In the second stage, the powdered polymer was mixed with wool, coating the fibers through electrostatic attraction. The polymer and wool mixture were then compressed with mild heating to provoke S-S metathesis in the polymer, which locks the wool in the polymer matrix. The wool fibers imparted tensile strength, insulating properties, and reduced the flammability of the composite. All building blocks are sustainable or derived from waste and the composite is a promising lead on next-generation insulation for energy conservation., (© 2021 Wiley-VCH GmbH.)

Shear stress in dynamic thin films, as in vortex fluidics, can be harnessed for generating non-equilibrium conditions, but the nature of the fluid flow is not understood. A rapidly rotating inclined tube in the vortex fluidic device (VFD) imparts shear stress (mechanical energy) into a thin film of liquid, depending on the physical characteristics of the liquid and rotational speed, ω , tilt angle, θ , and diameter of the tube. Through understanding that the fluid exhibits resonance behaviours from the confining boundaries of the glass surface and the meniscus that determines the liquid film thickness, we have established specific topological mass transport regimes. These topologies have been established through materials processing, as spinning top flow normal to the surface of the tube, double-helical flow across the thin film, and spicular flow, a transitional region where both effects contribute. The manifestation of mass transport patterns within the film have been observed by monitoring the mixing time, temperature profile, and film thickness against increasing rotational speed, ω . In addition, these flow patterns have unique signatures that enable the morphology of nanomaterials processed in the VFD to be predicted, for example in reversible scrolling and crumbling graphene oxide sheets. Shear-stress induced recrystallisation, crystallisation and polymerisation, at different rotational speeds, provide moulds of high-shear topologies, as 'positive' and 'negative' spicular flow behaviour. 'Molecular drilling' of holes in a thin film of polysulfone demonstrate spatial arrangement of double-helices. The grand sum of the different behavioural regimes is a general fluid flow model that accounts for all processing in the VFD at an optimal tilt angle of 45°, and provides a new concept in the fabrication of novel nanomaterials and controlling the organisation of matter., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Cysteine oxidation is important in cellular redox regulation, signaling, and biocatalysis. To understand the biological relevance of cysteine oxidation, it is desirable to identify the proteins involved, the site of the oxidized cysteine, and the relevant oxidation states. Because the thiol of cysteine can be converted to a wide range of oxidation states, mapping these oxidative modifications is challenging. The dynamic and reversible nature of many cysteine oxidation states compounds the difficulty in such proteomic analyses. In this review, we examine methods to detect cysteine sulfenic acid - a particularly challenging functional group to analyze because of its reactive nature. We focus on the selectivity of recently reported probes and discuss some challenges and opportunities in this field., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The Vortex Fluidic Device is a flow reactor that processes reactions in thin films. Running the metal-free azide-alkyne cycloaddition in this reactor revealed a dramatic enhancement of the "on water" effect. For the copper-catalyzed azide-alkyne cycloaddition, stainless steel or copper jet feeds were effective reservoirs of active copper catalyst.

Inverse vulcanization provides dynamic and responsive materials made from elemental sulfur and unsaturated cross-linkers. These polymers have been used in a variety of applications such as energy storage, infrared optics, repairable materials, environmental remediation, and precision fertilizers. In spite of these advances, there is a need for methods to recycle and reprocess these polymers. In this study, polymers prepared by inverse vulcanization are shown to undergo reactive compression molding. In this process, the reactive interfaces of sulfur polymers are brought into contact by mechanical compression. Upon heating these molds at relatively low temperatures (≈100 °C), chemical bonding occurs at the polymer interfaces by S-S metathesis. This method of processing is distinct from previous studies on inverse vulcanization because the polymers examined in this study do not form a liquid phase when heated. Neither compression nor heating alone was sufficient to mold these polymers into new architectures, so this is a new concept in the manipulation of sulfur polymers. Additionally, high-level ab initio calculations revealed that the weakest S-S bond in organic polysulfides decreases linearly in strength from a sulfur rank of 2 to 4, but then remains constant at about 100 kJ mol -1 for higher sulfur rank. This is critical information in engineering these polymers for S-S metathesis. Guided by this insight, polymer repair, recycling, and repurposing into new composites was demonstrated., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Inverse vulcanization is a copolymerization of elemental sulfur and alkenes that provides unique materials with high sulfur content (typically ≥50% sulfur by mass). These polymers contain a dynamic and reactive polysulfide network that creates many opportunities for processing, assembly, and repair that are not possible with traditional plastics, rubbers and thermosets. In this study, we demonstrate that two surfaces of these sulfur polymers can be chemically joined at room temperature through a phosphine or amine-catalyzed exchange of the S-S bonds in the polymer. When the nucleophile is pyridine or triethylamine, we show that S-S metathesis only occurs at room temperature for a sulfur rank > 2-an important discovery for the design of polymers made by inverse vulcanization. This mechanistic understanding of the S-S metathesis was further supported with small molecule crossover experiments in addition to computational studies. Applications of this chemistry in latent adhesives, additive manufacturing, polymer repair, and recycling are also presented., (This journal is © The Royal Society of Chemistry 2020.)

Rapid detection of cysteine oxidation in living cells is critical in advancing our understanding of responses to reactive oxygen species (ROS) and oxidative stress. Accordingly, there is a need to develop chemical probes that facilitate proteome-wide detection of cysteine's many oxidation states. Herein, we report the first whole-cell proteomics analysis using a norbornene probe to detect the initial product of cysteine oxidation: cysteine sulfenic acid. The oxidised proteins identified in the HeLa cell model represent the first targets of the ROS hydrogen peroxide. The panel of protein hits provides new and important information about the targets of oxidative stress, including 148 new protein members of the sulfenome. These findings provide new leads for the study and understanding of redox signalling and diseases associated with oxidative stress., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Sulfur is an underused by-product of the petrochemicals industry. Recent research into inverse vulcanization has shown how this excess sulfur can be transformed into functional polymers, by stabilization with organic crosslinkers. For these interesting new materials to realize their potential for applications, more understanding and control of their physical properties is needed. Here we report four new terpolymers prepared from sulfur and two distinct alkene monomers that can be predictively tuned in glass transition, molecular weight, solubility, mechanical properties, and color., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Elemental sulfur is an abundant and inexpensive chemical feedstock, yet it is underused as a starting material in chemical synthesis. Recently, a process coined inverse vulcanization was introduced in which elemental sulfur is converted into polymers by ring-opening polymerization, followed by cross-linking with an unsaturated organic molecule such as a polyene. The resulting materials have high sulfur content (typically 50-90% sulfur by mass) and display a range of interesting properties such as dynamic S-S bonds, redox activity, high refractive indices, mid-wave IR transparency, and heavy metal affinity. These properties have led to a swell of applications of these polymers in repairable materials, energy generation and storage, optical devices, and environmental remediation. This article will discuss the synthesis of polymers by inverse vulcanization and review case studies on their diverse applications. An outlook is also presented to discuss future opportunities and challenges for further advancement of polymers made by inverse vulcanization.

Norbornene derivatives were validated as probes for cysteine sulfenic acid on proteins and in live cells. Trapping sulfenic acids with norbornene probes is highly selective and revealed a different reactivity profile than the traditional dimedone reagent. The norbornene probe also revealed a superior chemoselectivity when compared to a commonly used dimedone probe. Together, these results advance the study of cysteine oxidation in biological systems.

Sulfur polymer composites were prepared by the reaction of canola oil and elemental sulfur in the presence of the NPK fertiliser components ammonium sulfate, calcium hydrogen phosphate, and potassium chloride. These composites released nutrients in a controlled fashion, resulting in less wasted fertiliser and better health for potted tomato plants when compared to free NPK.

Cellulose immobilized palladium (0) nanoparticles (PdNPs) were prepared for the use in scalable catalytic reactions in flow. Preparation of the catalyst is remarkably simple and fast, where a palladium acetate solution is drop-casted onto cellulose paper and then exposed to 1 atm of hydrogen for a mere 90 s to produce embedded Pd(0) nanoparticles. This catalyst system is efficient in the hydrogenation of alkenes, nitroarenes, ketones, and enamides, with products formed in high yields, under ambient pressure and temperature. The system is also effective for transfer hydrogenation using ammonium formate as an alternative hydrogen source. A high catalyst stability and reusability are demonstrated along with the chemoselective and scalable synthesis of industrially important fine chemicals, including the biobased molecule cyrene.

Mercury-dependent artisanal and small-scale gold mining (ASGM) is the largest source of mercury pollution on Earth. In this practice, elemental mercury is used to extract gold from ore as an amalgam. The amalgam is typically isolated by hand and then heated-often with a torch or over a stove-to distill the mercury and isolate the gold. Mercury release from tailings and vaporized mercury exceed 1000 tonnes each year from ASGM. The health effects on the miners are dire, with inhaled mercury leading to neurological damage and other health issues. The communities near these mines are also affected due to mercury contamination of water and soil and subsequent accumulation in food staples, such as fish-a major source of dietary protein in many ASGM regions. The risks to children are also substantial, with mercury emissions from ASGM resulting in both physical and mental disabilities and compromised development. Between 10 and 19 million people use mercury to mine for gold in more than 70 countries, making mercury pollution from ASGM a global issue. With the Minamata Convention on Mercury entering force this year, there is political motivation to help overcome the problem of mercury in ASGM. In this effort, chemists can play a central role. Here, the problem of mercury in ASGM is reviewed with a discussion on how the chemistry community can contribute solutions. Introducing portable and low-cost mercury sensors, inexpensive and scalable remediation technologies, novel methods to prevent mercury uptake in fish and food crops, and efficient and easy-to-use mercury-free mining techniques are all ways in which the chemistry community can help. To meet these challenges, it is critical that new technologies or techniques are low-cost and adaptable to the remote and under-resourced areas in which ASGM is most common. The problem of mercury pollution in ASGM is inherently a chemistry problem. We therefore encourage the chemistry community to consider and address this issue that affects the health of millions of people., (© 2018 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.)

Site-selective chemical conjugation of synthetic molecules to proteins expands their functional and therapeutic capacity. Current protein modification methods, based on synthetic and biochemical technologies, can achieve site selectivity, but these techniques often require extensive sequence engineering or are restricted to the N- or C-terminus. Here we show the computer-assisted design of sulfonyl acrylate reagents for the modification of a single lysine residue on native protein sequences. This feature of the designed sulfonyl acrylates, together with the innate and subtle reactivity differences conferred by the unique local microenvironment surrounding each lysine, contribute to the observed regioselectivity of the reaction. Moreover, this site selectivity was predicted computationally, where the lysine with the lowest p K a was the kinetically favored residue at slightly basic pH. Chemoselectivity was also observed as the reagent reacted preferentially at lysine, even in those cases when other nucleophilic residues such as cysteine were present. The reaction is fast and proceeds using a single molar equivalent of the sulfonyl acrylate reagent under biocompatible conditions (37 °C, pH 8.0). This technology was demonstrated by the quantitative and irreversible modification of five different proteins including the clinically used therapeutic antibody Trastuzumab without prior sequence engineering. Importantly, their native secondary structure and functionality is retained after the modification. This regioselective lysine modification method allows for further bioconjugation through aza-Michael addition to the acrylate electrophile that is generated by spontaneous elimination of methanesulfinic acid upon lysine labeling. We showed that a protein-antibody conjugate bearing a site-specifically installed fluorophore at lysine could be used for selective imaging of apoptotic cells and detection of Her2+ cells, respectively. This simple, robust method does not require genetic engineering and may be generally used for accessing diverse, well-defined protein conjugates for basic biology and therapeutic studies.

Water contaminated with Fe 3+ is undesirable because it can result in discoloured plumbing fixtures, clogging, and a poor taste and aesthetic profile for drinking water. At high levels, Fe 3+ can also promote the growth of unwanted bacteria, so environmental agencies and water authorities typically regulate the amount of Fe 3+ in municipal water and wastewater. Here, polysulfide sorbents-prepared from elemental sulfur and unsaturated cooking oils-are used to remove Fe 3+ contaminants from water. The sorbent is low-cost and sustainable, as it can be prepared entirely from waste. The preparation of this material using microwave heating and its application in iron capture are two important advances in the growing field of sulfur polymers., Competing Interests: Two authors (M. J. H. W. and J. M. C.) are inventors on a patent associated with the synthesis and applications of the canola oil polysulfide material (Patent No. WO 2017181217)., (This journal is © The Royal Society of Chemistry.)

Cysteine residues in proteins are subject to diverse redox chemistry. Oxidation of cysteine to S-nitrosocysteine, cysteine sulfenic and sulfinic acids, disulfides and persulfides are a few prominent examples of these oxidative post-translational modifications. In living organisms, these modifications often play key roles in cell signalling and protein function, but a full account of this biochemistry is far from complete. It is therefore an important goal in chemical biology to identify what proteins are subjected to these modifications and understand their physiological function. This review provides an overview of these modifications, how they can be detected and quantified using chemical probes, and how this information provides insight into their role in biology. This survey also highlights future opportunities in the study of cysteine redox chemistry, the challenges that await chemists and biologists in this area of study, and how meeting such challenges might reveal valuable information for biomedical science.

Biomimicry valuably allows the understanding of the essential chemical components required to recapitulate biological function, yet direct strategies for evaluating the roles of amino acids in proteins can be limited by access to suitable, subtly-altered unnatural variants. Here we describe a strategy for dissecting the role of histidine residues in enzyme active sites using unprecedented, chemical, post-translational side-chain-β,γ C-N bond formation. Installation of dehydroalanine (as a "tag") allowed the testing of nitrogen conjugate nucleophiles in "aza-Michael"-1,4-additions (to "modify"). This allowed the creation of a regioisomer of His (iso-His, His iso ) linked instead through its pros-Nπ atom rather than naturally linked via C4, as well as an aza-altered variant aza-His iso . The site-selective generation of these unnatural amino acids was successfully applied to probe the contributing roles (e.g., size, H-bonding) of His residues toward activity in the model enzymes subtilisin protease from Bacillus lentus and Mycobacterium tuberculosis pantothenate synthetase.

Mercury pollution threatens the environment and human health across the globe. This neurotoxic substance is encountered in artisanal gold mining, coal combustion, oil and gas refining, waste incineration, chloralkali plant operation, metallurgy, and areas of agriculture in which mercury-rich fungicides are used. Thousands of tonnes of mercury are emitted annually through these activities. With the Minamata Convention on Mercury entering force this year, increasing regulation of mercury pollution is imminent. It is therefore critical to provide inexpensive and scalable mercury sorbents. The research herein addresses this need by introducing low-cost mercury sorbents made solely from sulfur and unsaturated cooking oils. A porous version of the polymer was prepared by simply synthesising the polymer in the presence of a sodium chloride porogen. The resulting material is a rubber that captures liquid mercury metal, mercury vapour, inorganic mercury bound to organic matter, and highly toxic alkylmercury compounds. Mercury removal from air, water and soil was demonstrated. Because sulfur is a by-product of petroleum refining and spent cooking oils from the food industry are suitable starting materials, these mercury-capturing polymers can be synthesised entirely from waste and supplied on multi-kilogram scales. This study is therefore an advance in waste valorisation and environmental chemistry., (© 2017 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.)

Posttranslational modification of proteins expands their structural and functional capabilities beyond those directly specified by the genetic code. However, the vast diversity of chemically plausible (including unnatural but functionally relevant) side chains is not readily accessible. We describe C (sp 3 )-C (sp 3 ) bond-forming reactions on proteins under biocompatible conditions, which exploit unusual carbon free-radical chemistry, and use them to form Cβ-Cγ bonds with altered side chains. We demonstrate how these transformations enable a wide diversity of natural, unnatural, posttranslationally modified (methylated, glycosylated, phosphorylated, hydroxylated), and labeled (fluorinated, isotopically labeled) side chains to be added to a common, readily accessible dehydroalanine precursor in a range of representative protein types and scaffolds. This approach, outside of the rigid constraints of the ribosome and enzymatic processing, may be modified more generally for access to diverse proteins., (Copyright © 2016, American Association for the Advancement of Science.)

A polysulfide material was synthesized by the direct reaction of sulfur and d-limonene, by-products of the petroleum and citrus industries, respectively. The resulting material was processed into functional coatings or molded into solid devices for the removal of palladium and mercury salts from water and soil. The binding of mercury(II) to the sulfur-limonene polysulfide resulted in a color change. These properties motivate application in next-generation environmental remediation and mercury sensing., (© 2015 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.)

Thin film flow chemistry using a vortex fluidic device (VFD) is effective in the scalable acylation of amines under shear, with the yields of the amides dramatically enhanced relative to traditional batch techniques. The optimized monophasic flow conditions are effective in ≤80 seconds at room temperature, enabling access to structurally diverse amides, functionalized amino acids and substituted ureas on multigram scales. Amide synthesis under flow was also extended to a total synthesis of local anesthetic lidocaine, with sequential reactions carried out in two serially linked VFD units. The synthesis could also be executed in a single VFD, in which the tandem reactions involve reagent delivery at different positions along the rapidly rotating tube with in situ solvent replacement, as a molecular assembly line process. This further highlights the versatility of the VFD in organic synthesis, as does the finding of a remarkably efficient debenzylation of p-methoxybenzyl amines., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Chloride, bromide and iodide are inhibitors of the copper-catalysed azide-alkyne cycloaddition, with iodide exhibiting the most detrimental effects on rates and yields. A study of this inhibition is presented, along with experimental protocols to accommodate the presence of halides in this widely used reaction.

Allyl sulphides are reactive substrates in ruthenium-catalysed olefin metathesis reactions, provided each substrate is matched with a suitable catalyst. A profile of catalyst activity is described, along with the first demonstration of allyl sulphides as traceless promoters in relayed ring-closing metathesis reactions.

The Suzuki-Miyaura cross-coupling reaction is a foundation stone of modern organic synthesis, as evidenced by its widespread use in the preparation of pharmaceuticals, agrochemicals, polymers, and other functional materials. With the prevalence of this venerable reaction in industrial synthesis, it is prudent to ensure its application adheres to the tenets of green chemistry. The introduction of cross-coupling catalysts that are active in sustainable solvents is therefore an important endeavor. In this report, a melamine-palladium complex is introduced as a versatile catalyst for the Suzuki-Miyaura cross-coupling reaction. This catalyst is soluble and active in both water and the renewable organic solvent ethyl lactate. The melamine-palladium catalyst can also be cross-linked by reaction with formaldehyde to generate an insoluble polymeric catalyst that can be recovered after the cross-coupling. The melamine-palladium system is inexpensive, easy to handle, bench-stable, and effective in catalysis in the presence of a variety of impurities (high cross-coupling yields were obtained in reactions run in unfiltered river water to illustrate this final point). Additionally, investigations reported herein revealed an intriguing relationship between catalytic efficiency and the base employed in the cross-coupling reaction. Implications for the mechanism of transmetalation in aqueous Suzuki-Miyaura cross-coupling reaction are discussed.

Alginic acid was converted to a variety of ammonium alginate derivatives carrying diverse chemical cargo such as analgesics, antibiotics, and enzymes. These functional polymers could be fashioned into nanofibrous mats by electrostatic spinning. The therapeutic payload could be released in functional form by a simple ion exchange mechanism. Prospects in wound healing are discussed.

Protein therapeutics are gaining headway in the treatment and prevention of a variety of maladies. Critical to the success and growing use of biologic-level pharmaceuticals is the development of methods for their precise synthesis. This review highlights the emerging techniques for the total synthesis of proteins, with a special focus on the possibility of accessing therapeutic targets through chemoselective peptide ligations., (© 2012 John Wiley & Sons A/S.)

A highly practical synthesis of enantiopure (-)-α-kainic acid is accomplished in 37% overall yield, using 13 linear steps and a minimum of chromatographic separations via an unprecedented TMSCl-promoted palladium-catalyzed zinc-ene cyclization of an allyl acetate.

Covalent modification can expand a protein's functional capacity. Fluorescent or radioactive labeling, for instance, allows imaging of a protein in real time. Labeling with an affinity probe enables isolation of target proteins and other interacting molecules. At the other end of this functional spectrum, protein structures can be naturally altered by enzymatic action. Protein-protein interactions, genetic regulation, and a range of cellular processes are under the purview of these post-translational modifications. The ability of protein chemists to install these covalent additions selectively has been critical for elucidating their roles in biology. Frequently the transformations must be applied in a site-specific manner, which demands the most selective chemistry. In this Account, we discuss the development and application of such chemistry in our laboratory. A centerpiece of our strategy is a "tag-and-modify" approach, which entails sequential installation of a uniquely reactive chemical group into the protein (the "tag") and the selective or specific modification of this group. The chemical tag can be a natural or unnatural amino acid residue. Of the natural residues, cysteine is the most widely used as a tag. Early work in our program focused on selective disulfide formation in the synthesis of glycoproteins. For certain applications, the susceptibility of disulfides to reduction was a limitation and prompted the development of several methods for the synthesis of more stable thioether modifications. The desulfurization of disulfides and conjugate addition to dehydroalanine are two routes to these modifications. The dehydroalanine tag has since proven useful as a general precursor to many modifications after conjugate addition of various nucleophiles; phosphorylated, glycosylated, peptidylated, prenylated, and even mimics of methylated and acetylated lysine-containing proteins are all accessible from dehydroalanine. While cysteine is a useful tag for selective modification, unnatural residues present the opportunity for bio-orthogonal chemistry. Azide-, arylhalide-, alkyne-, and alkene-containing amino acids can be incorporated into proteins genetically and can be specifically modified through various transformations. These transformations often rely on metal catalysis. The Cu-catalyzed azide-alkyne addition, Ru-catalyzed olefin metathesis, and Pd-catalyzed cross-coupling are examples of such transformations. In the course of adapting these reactions to protein modification, we learned much about the behavior of these reactions in water, and in some cases entirely new catalysts were developed. Through a combination of these bio-orthogonal transformations from the panel of tag-and-modify reactions, multiple and distinct modifications can be installed on protein surfaces. Multiple modifications are common in natural systems, and synthetic access to these proteins has enabled study of their biological role. Throughout these investigations, much has been learned in chemistry and biology. The demands of selective protein modification have revealed many aspects of reaction mechanisms, which in turn have guided the design of reagents and catalysts that allow their successful deployment in water and in biological milieu. With this ability to modify proteins, it is now possible to interrogate biological systems with precision that was not previously possible., (© 2011 American Chemical Society)

Statistical correlation of mass spectrum peak broadening with product dispersity in protein conjugation reactions allows more detailed characterization of putative therapeutic conjugates.

Olefin metathesis has recently emerged as a viable reaction for chemical protein modification. The scope and limitations of olefin metathesis in bioconjugation, however, remain unclear. Herein we report an assessment of various factors that contribute to productive cross-metathesis on protein substrates. Sterics, substrate scope, and linker selection are all considered. It was discovered during this investigation that allyl chalcogenides generally enhance the rate of alkene metathesis reactions. Allyl selenides were found to be exceptionally reactive olefin metathesis substrates, enabling a broad range of protein modifications not previously possible. The principles considered in this report are important not only for expanding the repertoire of bioconjugation but also for the application of olefin metathesis in general synthetic endeavors.

The ability to alter protein structure by site-directed mutagenesis has revolutionized biochemical research. Controlled mutations at the DNA level, before protein translation, are now routine. These techniques allow specific, high fidelity interconversion largely between 20 natural, proteinogenic amino acids. Nonetheless, there is a need to incorporate other amino acids, both natural and unnatural, that are not accessible using standard site-directed mutagenesis and expression systems. Post-translational chemistry offers access to these side chains. Nearly half a century ago, the idea of a 'chemical mutation' was proposed and the interconversion between amino acid side chains was demonstrated on select proteins. In these isolated examples, a powerful proof-of-concept was demonstrated. Here, we revive the idea of chemical mutagenesis and discuss the prospect of its general application in protein science. In particular, we consider amino acids that are chemical precursors to a functional set of other side chains. Among these, dehydroalanine has much potential. There are multiple methods available for dehydroalanine incorporation into proteins and this residue is an acceptor for a variety of nucleophiles. When used in conjunction with standard genetic techniques, chemical mutagenesis may allow access to natural, modified, and unnatural amino residues on translated, folded proteins., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

A phosphine-free palladium catalyst for aqueous Suzuki-Miyaura cross-coupling is presented. The catalyst is active enough to mediate hindered, ortho-substituted biaryl couplings but mild enough for use on peptides and proteins. The Suzuki-Miyaura couplings on protein substrates are the first to proceed in useful conversions. Notably, hydrophobic aryl and vinyl groups can be transferred to the protein surface without the aid of organic solvent since the aryl- and vinylboronic acids used in the coupling are water-soluble as borate salts. The convenience and activity of this catalyst prompts use in both general synthesis and bioconjugation.

Multiple, complementary methods are reported for the chemical conversion of cysteine to S-allyl cysteine on protein surfaces, a useful transformation for the exploration of olefin metathesis on proteins.

Chemical modification of proteins is a rapidly expanding area in chemical biology. Selective installation of biochemical probes has led to a better understanding of natural protein modification and macromolecular function. In other cases such chemical alterations have changed the protein function entirely. Additionally, tethering therapeutic cargo to proteins has proven invaluable in campaigns against disease. For controlled, selective access to such modified proteins, a unique chemical handle is required. Cysteine, with its unique reactivity, has long been used for such modifications. Cysteine has enjoyed widespread use in selective protein modification, yet new applications and even new reactions continue to emerge. This Focus Review highlights the enduring utility of cysteine in protein modification with special focus on recent innovations in chemistry and biology associated with such modifications.

For a reaction to be generally useful for protein modification, it must be site-selective and efficient under conditions compatible with proteins: aqueous media, low to ambient temperature, and at or near neutral pH. To engineer a reaction that satisfies these conditions is not a simple task. Olefin metathesis is one of most useful reactions for carbon-carbon bond formation, but does it fit these requirements? This minireview is an account of the development of olefin metathesis for protein modification. Highlighted below are examples of olefin metathesis in peptidic systems and in aqueous media that laid the groundwork for successful metathesis on protein substrates. Also discussed are the opportunities in protein engineering for the genetic introduction of amino acids suitable for metathesis and the related challenges in chemistry and biology.