Search

Background: Transforaminal lumbar interbody fusion (TLIF), a commonly used procedure in spine surgery, has the advantage of a lower incidence of nerve lesions compared to the posterior lumbar interbody fusion (PLIF) technique. The intersomatic arthrodesis has always been carried out with a single tantalum cage normally used for PLIF. Tantalum is a metal that is particularly used in orthopedic surgery. It has a modulus of elasticity similar to marrow and leads to high primary stability of the implant., Materials and Methods: Our study was a retrospective monocentric observational study evaluating clinical and radiological outcomes of tantalum cages in a modified TLIF technique with posterior instrumentation and autologous and/or homologous posterolateral bone grafting. The aim of the study was to evaluate clinical outcomes and the increase in or redistribution of lumbar lordosis. The intersomatic arthrodesis was always carried out with a single tantalum cage normally used for PLIF to reduce the neurological risk. We retrospectively studied 105 patients who were treated with a modified unilateral TLIF approach by two surgeons between 2013 and 2018. We evaluated the Oswestry Disability Index (ODI), Visual Analogue Scale (VAS) for back pain, global lumbar lordosis, lordosis of L4-sacrum, segmental lordosis of functional motion units that underwent arthrodesis, pelvic tilt, pelvic incidence, and the sacral slope in 77 patients. All patients were suffering from grade III or IV Pfirrmann, instability, or foraminal post-laminectomy stenosis and/or grade I-II degenerative spondylolisthesis or low-grade isthmic spondylolisthesis. They had no significant sagittal imbalance, with a sagittal vertical axis (SVA) of < 5 mm. The average follow-up duration was 30 months., Results: We achieved excellent clinical results, with only four cases of failure (5.2%). Moreover, we noticed a statistically significant redistribution of lumbar lordosis, with an average percentage increase in L4-S1 lordosis equal to 19.9% (P < 0.001), an average increase in the L4-S1/Lumbar lordosis (LL) ratio from 0.53 to 0.63 (P < 0.001), and a mean percentage increase in sacral slope equal to 7.6% (P < 0.001)., Conclusion: Thanks to the properties of tantalum, our modified single-portal TLIF technique is a valid surgical solution to obtain a solid arthrodesis and restore the correct lumbar lordosis distribution while reducing neurological complications and the number of failures., Level of Evidence: 4 Trial registration statement: retrospective observational study, no trial registration., (© 2023. The Author(s).)

Lower instrumented vertebra (LIV) selection is critical to avoid complications like adding-on. This study aims to determine the usefulness of the traction test (TR) in selecting the LIV during surgery for adolescent idiopathic scoliosis (AIS). We analyzed 42 AIS patients with Lenke 1 curves who had preoperative, postoperative, and at least 12-month follow-up X-rays, as well as preoperative side bending (SB) and TR radiograms. Neutral vertebra (NV), stable vertebra (SV), lower instrumented vertebra (LIV), and Cobb angles were identified and compared on all radiographic images. In 23 cases, the TR resulted in SV proximalization compared to the preoperative X-rays, while in 8 cases, SV-TR was more distal. This distalization occurred in 50% of Lenke 1C curves, where a greater correction of the distal curve was found. NV-TR was proximal to NV-preop in 9 cases, while NV-SB was proximal in 22 cases. LIV was proximal to SV-TR in 8 cases, while it was proximal to SV-preop in 22. One patient with LIV proximal to SV-TR developed adding-on. In conclusion, the TR is crucial in AIS preoperative planning as it provides information distinct from that of standard X-rays and SB: (1) it better assesses gravitational stability than rotational stability; and (2) choosing LIV equal to or proximal to SV-TR may prevent adding-on, except in 'flexible' Lenke 1C curves where LIV should be equal or distal to SV-preop.

Introduction: Mayer-Rokitansky-Küster-Hauser syndrome (MRKH) syndrome can be classified into two types: type I (isolated) without extragenital abnormalities; type II (associated) with the presence of extragenital dimorphisms. Skeletal abnormalities are the second most frequent extragenital manifestations., Research Question: Association between MRKH and congenital scoliosis has been described; on the contrary, hyperkyphosis is very rare and sparsely described in the medical literature. Here we report our experience in the management of thoracolumbar hyperkyphosis in 16-year-old patient diagnosed with MRKH syndrome with an acute neurological impairment due to T11-T12 disc herniation., Material and Methods: Clinical and radiological images of the case were retrieved from the medical notes, operative records and imaging system., Results: Posterior surgical correction was proposed to treat the severe spinal deformity; however, surgery was delayed because of SARS-CoV2 pandemic outbreak. During the pandemic, the patient had a major clinical and radiological deterioration with development of paraparesis. Complete clinical resolution of the paraparesis and restoration of balance was achieved with a two stage surgical approach, with a first anterior stage followed by a delayed posterior approach aimed at deformity correction., Discussion: Congenital kyphosis are rare deformities that can progress rapidly leading to severe neurological deficits and worsening of the deformity. When patient has neurological deficit the surgical strategy to address the neurological problem first and plan the more complex and demanding corrective surgery remains a valid strategy that must be consider., Conclusion: This is the first reported case of hyperkyphosis in Mayer-Rokitansky-Küster-Hauser syndrome (MRKH) syndrome surgically treated., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 The Authors. Published by Elsevier B.V. on behalf of EUROSPINE, the Spine Society of Europe, EANS, the European Association of Neurosurgical Societies.)

Background: The most common conservative treatment for Adolescent Idiopathic Scoliosis (AIS) is bracing. However, several papers questioned the effectiveness of bracing for curves between 40° and 50° Cobb: the effectiveness in preventing curve progression could be as low as 35%. Seriate casting is considered a standard approach in early onset scoliosis; however, in the setting of AIS, cast treatment is seldom utilized, with only few studies reporting on its effectiveness. Aim of the study: The main aim of the study is to determine whether a seriate casting with Risser casts associated with bracing is more effective in preventing curve progression than bracing alone in curves larger than 40°. Furthermore, the secondary endpoints were: (1) is there a difference in effectiveness of casting between Thoracic (T) and Thoracolumbar/Lumbar (TL/L) curves? (2) Does the ‘in cast’ correction predicts the treatment outcome? (3) What is the effect on thoracic kyphosis of casting? Methods: This is a retrospective monocentric case−control study; through an Institutional Database search we identified all the patients treated at our institution between 1 January 2017 and 31 December 2020, with a diagnosis of AIS, Risser grade between 0 and 4 at the beginning of the treatment, at least one curve above 40° Cobb and treatment with either seriate Risser casting and bracing (Study Group, SG) or bracing alone (Control Group, CG). Standing full spine X-rays in AP and LL are obtained before and after the cast treatment; only AP standing full spine X-rays ‘in-cast’ are obtained for each cast made. Patients were stratified according to the curve behavior at the end of treatment (Risser 5): progression was defined as ≥6° increase in the curve magnitude or fusion needed; stabilization is defined as a change in curve by ±5°; and improvement was defined as ≥6° reduction in the curve. Results: For the final analysis, 55 compliant patients (12 M, 43 F, mean age 13.5 ± 1.6) were included in the SG and 27 (4 M, 23 F, mean age 13.6 ± 1.6) in the CG. Eight (14.5%) patients in the SG failed the conservative treatment while 14 (51.3%) failed in the CG. Consequently, the Relative Risk for progression in the Efficacy Analysis was 1.8 (95% CI 1, 3−2.6, p = 0.001), and the Number Needed to Treat was 2,4. No significant difference was found between the T and TL/L curves concerning the ‘progressive’ endpoint (z-score 0.263, p = 0.79). The mean percentage of ‘in cast’ curve reduction was 40.1 ± 15.2%; no significant correlation was found between the percentage of correction and the outcome (Spearman Correlation Coefficient 0.18). Finally, no significant differences between baseline and end of FU TK were found (32° ± 16.2 vs. 29.6 ± 15.8, p = ns). Discussion: Seriate Risser casting for AIS with larger curves (>40° Cobb) is effective in reducing curve progression when compared with full time bracing alone in treatment compliant patients. The treatment is equally effective in controlling T and TL/L curves; furthermore, a slight but non-significant decrease in TK was observed in patients treated with casting. This type of treatment should be considered for AIS patients who present with large curves to potentially reduce the percentage of surgical cases. Short Abstract: The aim of the study is to determine whether seriate Risser casting associated with bracing is more effective in preventing curve progression than bracing alone in curves larger than 40°. This is a retrospective monocentric case−control study; we identified all the patients treated at our institution with a diagnosis of AIS, Risser grade 0−4 at the beginning of the treatment, at least one curve above 40° Cobb (35° if treated with bracing alone) and treatment with either seriate Risser casting and bracing (Study Group, SG) or bracing alone (Control Group, CG). Fifty-five patients (12 M, 43 F, mean age 13.5 ± 1.6) were included in the SG and 30 (5 M, 25 F, mean age 13.9 ± 1.7) in the CG. Eight (14,5%) patients in the SG failed the conservative treatment while fifteen (50%) failed in the CG. Consequently, the Relative Risk for progression in the Efficacy Analysis was 1.8 (95% CI 1.3−2.6, p = 0.001), and the Number Needed to Treat was 2,4. Seriate Risser casting for AIS with larger curves (>40°) is effective in reducing curve progression when compared with full time bracing alone. This type of treatment should be considered for AIS patients who present with large curves.

Background and Objective: Gallium-68 is a PET isotope available in each nuclear medicine departments, even those not equipped with a cyclotron, since it is easily obtained by eluting compact and transportable generator system. The preparation of Ga-68 DOTA-labeled compounds is performed by remotely controlled automated systems developed in order to ensure production efficiency, reproducibility of the results, fast reaction time, to facilitate the synthesis and minimize the radiation exposure. Many automatic synthesis systems are available on the radiopharmaceutical market, however, they requires some technical adaptations for routine use. We reported the [68Ga]Ga-DOTA-TOC production by automated cassette-based theranostic synthesizer system used in combination with a disposable GMP grade cassette system for cationic purification., Methods: The synthesizer is integrated with the 68Ge/68Ga generator systems and it allows to perform elution, eluate purification and radiolabeling in about 38 minutes. We have performed in 2 year (January 2016 - January 2018) over 100 [68Ga]Ga-DOTA-TOC preparations., Results: The average synthesis yield of radiopharmaceutical production was 54.4 ± 2.3 % and the radiochemical purity average was found 96.94 ± 0.74 %. Only three [68Ga]Ga-DOTA-TOC preparations have failed., Conclusion: The methodology and the adopted technical solutions allowed to obtain a high quality radiopharmaceutical product as required by the European Pharmacopoeia., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.)

Study Design: Retrospective large population based-study., Objective: Assessment of the epidemiologic trends and economic burden of first spinal fusions., Summary of Background Data: No adequate data are available regarding the epidemiology of spinal fusion surgery and its economic impact in Europe., Methods: The study population was identified through a data warehouse (DENALI), which matches clinical and economic data of different Healthcare Administrative databases of the Italian Lombardy Region. The study population consisted of all subjects, resident in Lombardy, who, during the period January 2001 to December 2010, underwent spinal fusion surgery (ICD-9-CM codes: 81.04, 81.05, 81.06, 81.07, and 81.08). The first procedure was used as the index event. We estimated the incidence of first spinal fusion surgery, the population and surgery characteristics and the healthcare costs from the National Health Service's perspective. The analysis was performed for the entire population and divided into the main groups of diagnosis., Results: The analysis identified 17,772 [mean age (SD): 54.6 (14.5) years, 55.3% females] spinal fusion surgeries. Almost 67% of the patients suffered from a lumbar degenerative disease. The incidence rate of interventions increased from 11.5 to 18.5 per 100,000 person-year between 2001 and 2006, and was above 20.0 per 100,000 person-year in the last 4 years. The patients' mean age increased during the observational time period from 48.1 to 55.9 years; whereas the median hospital length of stay reported for the index event decreased. The average cost of the spinal fusion surgery increased during the observational period, from &OV0556; 4726 up to &OV0556; 9388., Conclusion: The study showed an increasing incidence of spinal fusion surgery and costs from 2001 to 2010. These results can be used to better understand the epidemiological and economic burden of these interventions, and help to optimize the resources available considering the different clinical approaches accessible today., Level of Evidence: 4.

We prospectively assessed the results of 239 primary total hip replacements performed using a conical stem combined with modular necks of different lengths and inclinations (Modulus System, Lima Corporate San Daniele Del Friuli, Udine, Italia) in 222 patients (50 men, 172 women), undergoing surgery between October 2001 and December 2006 and presenting with anatomical deformities of the proximal femur and/or acetabulum, including developmental dysplasia (DDH), ankylosis, and sequelae of osteotomies or fractures. Such conditions can make hip replacement problematic. The mean age at the time of surgery was 57.6 years (22 ÷ 83). No patients were lost to follow-up. 3 femoral components underwent revision. At a mean of 5 years follow-up the Harris Hip Score showed a significant improvement, increasing from 35 preoperatively to a mean of 96.6. Using Kaplan-Meier analysis the survival rate at 5 years was 98.28%. The Modulus stem showed good mid-term results in terms of survival, as well as clinical and radiographic outcome.