Search

Tracking the variation of Cl - timely within the crevice is of great significance for comprehending the dynamic mechanism of crevice corrosion. The reported chloride ion selective electrodes are difficult to realize the long-time Cl - detection inside the confined crevice, due to their millimeter size or a relative limited lifespan. For this purpose, an Ag/AgCl ultra-micro sensor (UMS) with a radius of 12.5 μm was fabricated and optimized using laser drawing and electrodeposition techniques. Results show the AgCl film's structure is significantly impacted by the deposited current density, and further affects the linear response, life span and stability of Ag/AgCl UMS. The UMS prepared at current density of 0.1 mA/cm 2 for 2 h shows a rapid response (several seconds), excellent stability and reproducibility, strong acid/alkali tolerance, sufficient linearity (R 2  > 0.99), and long lifespan (86 days). Moreover, combined with the potentiometric mode of scanning electrochemical microscope (SECM), the Ag/AgCl UMS was successfully applied to monitor the in-situ radial Cl - concentration in micro-regions inside a 100 μm gap of stainless steel. The findings demonstrated that there was obvious radial difference in Cl - concentration inside the crevice, where the fastest rise in Cl - concentration was at the opening. The proposed method which combines the UMS with SECM has attractive practical applications for microzone Cl - monitoring in real time inside crevice. It may further promote the study of other localized corrosion mechanism and the development of microzone ions detection method., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Titanium and its alloys are protected by a compact and stable passive film, which confers resistance to corrosion by the primary halogen chloride (Cl - ) while being less effective against fluoride (F - ). Although researchers have recognized different macroscopic corrosion effects of these halide ions on titanium, the underlying mechanisms remain largely unexplored. In this work, the bonding of Cl - /F - with stable passive films was studied in neutral and acidic (pH = 2.3) conditions. The synergistic effect between the interfacial hydrogen bond (HB) structure and halogens on titanium corrosion was first revealed using first-principles calculation and Raman spectroscopy. F - forms more stable halogen-Ti bonds than Cl - , resulting in titanium degradation. The proton combined with F - exhibits a specific synergistic effect, causing corrosion of the passive film. The water hydrogen bond transformation index (HBTI) at the titanium/aqueous interface was 1.88 in an acidic solution containing F - , significantly higher than that in neutral/acid solutions containing Cl - (1.80/1.81) and a neutral solution containing F - (1.81). This work clarifies the structure-activity relationship between HBTI and the destruction of titanium passive films. We propose that the microstructure of the interfacial HB is an undeniable factor in the corrosion of titanium.

Hypothesis: Unlike noble metals, the oxygen reduction reaction (ORR) behavior on Ti is more complicated due to its spontaneously formed oxide film. This film results in sluggish ORR kinetics and tends to be reduced within ORR potential region, causing the weak and multi-reaction coupled current. Though Ti is being used in chemical and biological fields, its ORR research is still underexplored., Experiments: We innovatively employed the modified reactive tip generation-substrate collection (RTG/SC) mode of scanning electrochemical microscopy (SECM) with high efficiency of 97.2 % to quantitatively study the effects of film characteristics, solution environment (pH, anion, dissolved oxygen), and applied potential on the ORR activity and selectivity of Ti. Then, density functional theory (DFT) and molecular dynamics (MD) analyses were employed to elucidate its ORR behavior., Findings: On highly reduced Ti, film properties dominate ORR behavior with promoted 4e - selectivity. Rapid film regeneration in alkaline/O 2 -saturated conditions inhibits ORR activity. Besides, ORR is sensitive to anion species in neutral solutions while showing enhanced 4e - reduction in alkaline media. All the improved 4e - selectivities originate from the hydrogen bond/electrostatic stabilization effect, while the decayed ORR activity by Cl - arises from the suppressed O 2 adsorption. This work provides theoretical support and possible guidance for ORR research on oxide-covered metals., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Ion adsorption and hydrogen bond (HB) network reconstruction in electric double layer (EDL) have a profound impact on the interface properties. The microstructure in the bulk phase of 1.00-21.30 wt.% Na 2 SO 3 aqueous solutions are investigated by X-ray scattering, confocal Raman spectroscopy, and classical molecular dynamics. The electronic properties of SO 3 2- adsorption and the geometric structure of the HB network in the EDL at the titanium TiO 2 (101) surface are studied by density functional theory (DFT) and classical molecular dynamics. The SO 3 2- strongly weakens the fully hydrogen-bonded water (FHW) and transforms it into partial hydrogen-bonded water (PHW). The HB transformation index (HBTI = PHW/FHW) shows a linear relationship with the mass fraction of Na 2 SO 3 . The TiO b -parallel adsorption configuration of SO 3 2- enhances the ionicity of the O b -Ti 6 bond, resulting in the formation of oxygen vacancies at the titanium passive film surface. Besides, SO 3 2- and Na + are enriched and thermodynamic supersaturated in the inner Helmholtz layer (IHL), and the ions are diluted in the outer Helmholtz layer (OHL). The diffusion coefficient of SO 3 2- and water molecules in EDL decreases seriously, which is easy to causes salt scaling on the surface of titanium passive film. This work provides evidence for the destruction of titanium passive film by SO 3 2- .

Combined computational and experimental studies elucidated the distinctive mechanistic features of electrochemical cobalt-catalyzed C-H oxygenation. A sequential electrochemical-chemical (EC) process was identified for the formation of an amidylcobalt(iii) intermediate. The synthesis, characterization, cyclic voltammetry studies, and stoichiometric reactions of the related amidylcobalt(iii) intermediate suggested that a second on-cycle electro-oxidation occurs on the amidylcobalt(iii) species, which leads to a formal Co(iv) intermediate. This amidylcobalt(iv) intermediate is essentially a cobalt(iii) complex with one additional single electron distributed on the coordinating heteroatoms. The radical nature of the coordinating pivalate allows the formal Co(iv) intermediate to undergo a novel carboxylate-assisted HAT mechanism to cleave the arene C-H bond, and a CMD mechanism could be excluded for a Co(iii/i) catalytic scenario. The mechanistic understanding of electrochemical cobalt-catalyzed C-H bond activation highlights the multi-tasking electro-oxidation and the underexplored reaction channels in electrochemical transition metal catalysis., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)