Search

Radio frequency interference (RFI) analysis is crucial for ensuring the proper functioning of a radio telescope and the quality of astronomical observations, as human-generated interference can compromise scientific data collection. The aim of this study is to present the results of an RFI measurement campaign in the frequency range of 4-5.8 GHz, a portion of the well-known C-band, for the Sardinia Radio Telescope (SRT), conducted in October-November 2023. In fact, this Italian telescope, managed by the Astronomical Observatory of Cagliari (OAC), a branch of the Italian National Institute for Astrophysics (INAF), was recently equipped with a new C-band receiver that operates from 4.2 GHz to 5.6 GHz. The measurements were carried out at three strategically chosen locations around the telescope using the INAF mobile laboratory, providing comprehensive coverage of all possible antenna pointing directions. The results revealed several sources of RFI, including emissions from radar, terrestrial and satellite communications, and wireless transmissions. Characterizing these sources and assessing their frequency band occupation are essential for understanding the impact of RFI on scientific observations. This work provides a significant contribution to astronomers who will use the SRT for scientific observations, offering a suggestion for the development of mitigation strategies and safeguarding the radio astronomical environment for future observational campaigns.

The recent wireless communication systems require high gain, lightweight, low profile, and simple antenna structures to ensure high efficiency and reliability. The existing microstrip patch antenna (MPA) design approaches attain low gain and high return loss. To solve this issue, the geometric dimensions of the antenna should be optimized. The improved Particle Swarm Optimization (PSO) algorithm which is the combination of PSO and simulated annealing (SA) approach (PSO-SA) is employed in this paper to optimize the width and length of the inset-fed rectangular microstrip patch antennas for Ku-band and C-band applications. The inputs to the proposed algorithm such as substrate height, dielectric constant, and resonant frequency and outputs are optimized for width and height. The return loss and gain of the antenna are considered for the fitness function. To calculate the fitness value, the Feedforward Neural Network (FNN) is employed in the PSO-SA approach. The design and optimization of the proposed MPA are implemented in MATLAB software. The performance of the optimally designed antenna with the proposed approach is evaluated in terms of the radiation pattern, return loss, Voltage Standing Wave Ratio (VSWR), gain, computation time, directivity, and convergence speed.

This paper presents a highly integrated C-band RF transceiver front-end design consisting of two Single Pole Double Throw (SPDT) transmit/receive (T/R) switches, a Low Noise Amplifier (LNA), and a Power Amplifier (PA) for Ultra-Wideband (UWB) positioning system applications. When fabricated using a 0.25 μm GaAs pseudomorphic high electron mobility transistor (pHEMT) process, the switch is optimized for system isolation and stability using inductive resonance techniques. The transceiver front-end achieves overall bandwidth expansion as well as the flat noise in receive mode using the bandwidth expansion technique. The results show that the front-end modules (FEM) have a typical gain of 22 dB in transmit mode, 18 dB in receive mode, and 2 dB noise in the 4.5-8 GHz band, with a chip area of 1.56 × 1.46 mm 2 . Based on the available literature, it is known that the proposed circuit is the most highly integrated C-band RF transceiver front-end design for UWB applications in the same process.

In this article, a miniature eight-port multiple-input multiple-output (MIMO) antenna array is proposed for fifth-generation (5G) sub-6 GHz handset applications. The individual antenna element comprises a radiator shaped like the Chinese character "" (phonetically represented as "Wang") and three split-ring resonators (SRR) on the metal frame. The size of the individual antenna element is only 6.8 × 7 × 1 mm 3 (47.6 mm 3 ). The proposed antenna element has a -10 dB impedance bandwidth of 1.7 GHz (from 3.3 GHz to 5 GHz) that can cover 5G New Radio (NR) sub-6 GHz bands N77 (3.3-4.2 GHz), N78 (3.3-3.8 GHz), and N79 (4.4-5 GHz). The evolution design, the current distribution, the effects of single-handed holding, and the analysis of the parameters are deduced to study the approach used to design the featured antenna. The measured total efficiencies are from 40% to 80%, the isolation is better than 12 dB, the calculated envelope correlation coefficient (ECC) is less than 0.12, and the calculated channel capacity (CC) ranges from 35 to 38 bps/Hz. The presented antenna array is a good alternative to 5G mobile handsets with wideband operation, a metal frame, and minimized spacing.

This work presents a dual-wavelength C-band erbium-doped fiber laser assisted by an artificial backscatter reflector. This fiber-based reflector, inscribed by femtosecond laser direct writing, was fabricated into a single mode fiber with a length of 32 mm. The dual-wavelength laser obtained, centered at 1527.7 nm and 1530.81 nm, showed an optical signal-to-noise ratio over 46 dB when pumped at 150 mW. Another feature of this laser was that the power difference between the two channels was just 0.02 dB, regardless of the pump power, resulting in a dual emission laser with high equalization. On the other hand, an output power level and a central wavelength instability as low as 0.3 dB and 0.01 nm were measured, in this order for both channels. Moreover, the threshold pump power was 40 mW. Finally, the performance of this dual-wavelength fiber laser enhanced with a random reflector for sensing applications was studied, achieving the simultaneous measurement of strain and temperature with sensitivities around 1 pm/με and 9.29 pm/°C, respectively.

Development of satellite and radar applications has been continuously studied to reach the demand in the recent communication technology. In this study, a new oval-square-shaped split-ring resonator with left-handed metamaterial properties was developed for C-band and X-band applications. The proposed metamaterial was fabricated on 9 × 9 × 0.508 mm 3 size of Rogers RO4003C substrate. The proposed metamaterial structure was designed and simulated using Computer Simulation Technique (CST) Microwave Studio with the frequency ranging between 0 to 12 GHz. The simulated result of the proposed design indicated dual resonance frequency at 5.52 GHz (C-band) and 8.81 GHz (X-band). Meanwhile, the experimental result of the proposed design demonstrated dual resonance frequency at 5.53 GHz (C-band) and 8.31 GHz (X-band). Therefore, with a slight difference in the dual resonance frequency, the simulated result corresponded to the experimental result. Additionally, the proposed design exhibited the ideal properties of electromagnetic which is left-handed metamaterial (LHM) behavior. Hence, the metamaterial structure is highly recommended for satellite and radar applications.

We proposed a differential fiber-optic refractive index sensor based on coupled plasmon waveguide resonance (CPWR) in the C-band. The sensor head is a BK7 prism coated with ITO/Au/ITO/TiO 2 film. CPWR is excited on the film by the S-polarized components of an incident light. The narrow absorption peak of CPWR makes it possible to realize dual-wavelength differential intensity (DI) interrogation by using only one incident point. To implement DI interrogation, we used a DWDM component to sample the lights with central wavelengths of 1529.55 and 1561.42 nm from the lights reflected back by the sensor head. The intensities of the dual-wavelength lights varied oppositely within the measurement range of refractive index, thus, a steep slope was produced as the refractive index of the sample increased. The experimental results show that the sensitivity is 32.15/RIUs within the measurement range from 1.3584 to 1.3689 and the resolution reaches 9.3 × 10 -6 RIUs. Benefiting from the single incident point scheme, the proposed sensor would be easier to calibrate in bio-chemical sensing applications. Moreover, this sensing method is expected to be applied to retro-reflecting SPR sensors with tapered fiber tip to achieve better resolution than wavelength interrogation.

One of the most common techniques for increasing data bitrate using the telecommunication system is to use dense wavelength division multiplexing (DWDM). However, the implementation of DWDM with more channels requires additional waveguide coupler devices and greater energy consumption, which can limit the system performances. To solve these issues, we propose a new approach for designing the demultiplexer using angled multimode interference (AMMI) in gallium nitride (GaN)-silica (SiO 2 ) slot waveguide structures. SiO 2 and GaN materials are selected for confining the infrared light inside the GaN areas under the transverse electric (TE) field mode. The results show that, after 3.56 mm light propagation, three infrared wavelengths in the C-band can be demultiplexed using a single AMMI coupler with a power loss of 1.31 to 2.44 dB, large bandwidth of 12 to 13.69 nm, very low power back reflection of 47.64 to 48.76 dB, and crosstalk of -12.67 to -15.62 dB. Thus, the proposed design has the potential for improving performances in the telecommunication system that works with DWDM technology.

The main objective of this study is to analyze the potential use of Sentinel-1 (S1) radar data for the estimation of soil characteristics (roughness and water content) and cereal vegetation parameters (leaf area index (LAI), and vegetation height (H)) in agricultural areas. Simultaneously to several radar acquisitions made between 2015 and 2017, using S1 sensors over the Kairouan Plain (Tunisia, North Africa), ground measurements of soil roughness, soil water content, LAI and H were recorded. The NDVI (normalized difference vegetation index) index computed from Landsat optical images revealed a strong correlation with in situ measurements of LAI. The sensitivity of the S1 measurements to variations in soil moisture, which has been reported in several scientific publications, is confirmed in this study. This sensitivity decreases with increasing vegetation cover growth (NDVI), and is stronger in the VV (vertical) polarization than in the VH cross-polarization. The results also reveal a similar increase in the dynamic range of radar signals observed in the VV and VH polarizations as a function of soil roughness. The sensitivity of S1 measurements to vegetation parameters (LAI and H) in the VV polarization is also determined, showing that the radar signal strength decreases when the vegetation parameters increase. No vegetation parameter sensitivity is observed in the VH polarization, probably as a consequence of volume scattering effects., Competing Interests: The authors declare no conflict of interest.

We investigated the karyotype of 18 didelphid species captured at 13 localities in the Brazilian Amazon, after conventional staining, C-banding, Ag-NOR and fluorescent in situ hybridization (FISH) using the 18S rDNA probe. Variations were found in the X chromosome, heterochromatin distribution and the 18S rDNA sequence. The main variation observed was in the position of the centromere in the X chromosome of Caluromys philander Linnaeus, 1758 and Marmosa murina Linnaeus, 1758. For both species, the X chromosome showed a geographical segregation in the pattern of variation between eastern and western Brazil, with a possible contact area in the central Amazon. C-banding on the X chromosome revealed two patterns for the species of Marmosops Matschie, 1916, apparently without geographic or specific relationships. The nucleolus organizer region (NOR) of all species was confirmed with the 18S rDNA probe, except on the Y chromosome of Monodelphis touan Shaw, 1800. The distribution of this marker varied only in the genus Marmosa Gray, 1821 [ M. murina Thomas, 1905 and M. demerarae Thomas, 1905]. Considering that simple NORs are seen as a plesiomorphic character, we conclude that the species Marmosa spp. and Didelphis marsupialis Linnaeus, 1758 evolved independently to the multiple condition. By increasing the sample, using chromosomal banding, and FISH, we verified that marsupials present intra- and interspecific chromosomal variations, which suggests the occurrence of frequent chromosomal rearrangements in the evolution of this group. This observation contrasts with the chromosomal conservatism expected for didelphids.

Among teleost fishes, Asian swamp eel ( Monopterus albus Zuiew, 1793) possesses the lowest chromosome number, 2n = 24. To characterize the chromosome constitution and investigate the genome organization of repetitive sequences in M. albus , karyotyping and chromosome mapping were performed with the 18S - 28S rRNA gene, telomeric repeats, microsatellite repeat motifs, and Rex retroelements. The 18S - 28S rRNA genes were observed to the pericentromeric region of chromosome 4 at the same position with large propidium iodide and C-positive bands, suggesting that the molecular structure of the pericentromeric regions of chromosome 4 has evolved in a concerted manner with amplification of the 18S - 28S rRNA genes. (TTAGGG)n sequences were found at the telomeric ends of all chromosomes. Eight of 19 microsatellite repeat motifs were dispersedly mapped on different chromosomes suggesting the independent amplification of microsatellite repeat motifs in M. albus . Monopterus albus Rex1 ( MALRex1 ) was observed at interstitial sites of all chromosomes and in the pericentromeric regions of most chromosomes whereas MALRex3 was scattered and localized to all chromosomes and MALRex6 to several chromosomes. This suggests that these retroelements were independently amplified or lost in M. albus . Among MALRexs ( MALRex1 , MALRex3 , and MALRex6 ), MALRex6 showed higher interspecific sequence divergences from other teleost species in comparison. This suggests that the divergence of Rex6 sequences of M. albus might have occurred a relatively long time ago.

Constitutive heterochromatin is a highly condensed fraction of chromatin in chromosomes. It is characterized by a high degree of polymorphism. Heterochromatin is located in the centromeric, telomeric, and interstitial parts of chromosomes. We used the CBG ( C: banding using B: arium hydroxide by G: iemsa) staining technique to identify heterochromatin in chromosomes. Analysis of karyotypes of F1 hybrids resulting from intergeneric hybridization of ducks (A. platyrhynchos × C. moschata) and interspecific crosses of geese (A. anser × A. cygnoides) were used to compare the karyotypes of 2 species of duck and 2 species of geese, as well as to compare the hybrids with the parent species. The localization of C-bands and their size were determined. In the duck hybrid, greater amounts of heterochromatin were noted in the homologous chromosomes from the duck A. platyrhynchos than in the chromosomes from the duck C. moschata. In the goose hybrid more heterochromatin was observed in the homologous chromosomes from the goose A. cygnoides than in the chromosomes from the goose A. anser. Comparison of chromosomes from the duck hybrid with chromosomes of the ducks A. platyrhynchos and C. moschata revealed nearly twice as much constitutive heterochromatin in the chromosomes of the hybrid. When chromosomes from the goose hybrid were compared with those of the geese A. anser and A. cygnoides, differences in the average content of heterochromatin were observed on only a few chromosomes., (© 2016 Poultry Science Association Inc.)

Cytogenetic studies have assisted in the taxonomic classification of organisms, especially those involving species with highly similar morphologic characteristics, or so-called cryptic species. Strongylura marina and Strongylura timucu collected from Paranaguá Bay, Paraná Coast in Southern Brazil are considered cryptic species, and the identification of interspecific variations based on the number and/or morphology of its chromosomes may serve as differentiating cytotaxonomic markers. Chromosomes of the two species were subjected to different banding and staining methods (C-, Ag-, and DAPI-CMA3), as well as chromosomal mapping of major rDNA (45S), revealed with an 18S probe by fluorescence in situ hybridization (FISH). The pattern of distribution of constitutive heterochromatin showed distinct features involving the pericentromeric and telomeric bands in both species. In S. marina, chromosome 1 represents the main species-specific marker, appearing almost entirely heterochromatic. In both species, the 45S rDNA is located at terminal region of the short arm of the chromosome 6, as detected by silver nitrate staining and FISH. Despite the apparent conserved diploid number of 48 chromosomes, data on the karyotype microstructure characterize the cytogenetic profile of the genus and may allow the establishment of cytotaxonomic and evolutionary inferences for these fishes.

A new design and analysis of a wide-band double-negative metamaterial, considering a frequency range of 0.5 to 7 GHz, is presented in this paper. Four different unit cells with varying design parameters are analyzed to evaluate the effects of the unit-cell size on the resonance frequencies of the metamaterial. Moreover, open and interconnected 2 × 2 array structures of unit cells are analyzed. The finite-difference time-domain (FDTD) method, based on the Computer Simulation Technology (CST) Microwave Studio, is utilized in the majority of this investigation. The experimental portion of the study was performed in a semi-anechoic chamber. Good agreement is observed between the simulated and measured S parameters of the developed unit cell and array. The designed unit cell exhibits negative permittivity and permeability simultaneously at S-band (2.95 GHz to 4.00 GHz) microwave frequencies. In addition, the designed unit cell can also operate as a double-negative medium throughout the C band (4.00 GHz to 4.95 GHz and 5.00 GHz to 5.57 GHz). At a number of other frequencies, it exhibits a single negative value. The two array configurations cause a slight shift in the resonance frequencies of the metamaterial and hence lead to a slight shift of the single- and double-negative frequency ranges of the metamaterial.

The current taxonomy of most Atelopus species is based on morphological and color data only. Recent studies suggest that A. spumarius may represent a species complex assigned under the same name. Karyotypic data and description of sperm ultrastructure for 13 specimens of A. spumarius are presented here for the first time. A chromosomal analysis revealed 2n = 22 chromosomes, with centromeric heterochromatin in all pairs and a nucleolar organizer region (NOR) on the telomere of pair 7. The sperm was of the bufonoid type, presenting a filiform nucleus covered by an acrosomal complex and a mitochondrial collar in the neck region. The tail was composed of an axoneme, an undulating membrane and an axial rod. A karyotype analysis of A. spumarius showed the same chromosome number and similar chromosomal morphology as described for congeneric species, with slight differences probably resulting from pericentric inversions. The NOR location (on pair 7) was the same as that observed for species belonging to the genus Rhinella. The spermatological findings indicate a close relationship between Atelopus and the bufonoid lineage. The present data are useful for reference in future studies to determine whether more than one species are assigned to A. spumarius.

Thoracocharax stellatus (Characiformes, Gasteropelecidae) is a small Neotropical species of fish, widely distributed in several rivers of South America. Evidence for karyotype heteromorphysm in populations from different geographical regions has been reported for this species. In this way, populations of Thoracocharax stellatus from the Paraguay River basin were cytogenetically characterized and the results were compared with other studies performed in the same species but from different basins. The results showed a diploid number of 2n = 54 for Thoracocharax stellatus, with chromosomes arranged in 6 metacentric (m), 6 submetacentric (sm), 2 subtelocentric (st) and 40 acrocentric (a), for both sexes, with a simple Nucleolus Organiser Region (NOR) system reported by the techniques of silver nitrate impregnation and fluorescent in situ hybridisation (FISH) using 18S rDNA sequences as probe. The distribution of constitutive heterochromatin, observed by the C-band technique and Chromomycin A3 staining showed great similarity among the analyzed populations and consists mainly of discrete blocks in the pericentromeric and telomeric regions of most chromosomes. The presence of female heterogamety was also observed indicating a ZZ/ZW system with W chromosome almost totally heterochromatic. The results also show cytogenetic diversity of the group and are useful to understand the mechanisms of karyotype evolution of the family.