Search

Time-domain Brillouin scattering (TDBS) is a developing technique for imaging/evaluation of materials, currently used in material science and biology. Three-dimensional imaging and characterization of polycrystalline materials has been recently reported, demonstrating evaluation of inclined material boundaries. Here, the TDBS technique is applied to monitor the destruction of a lithium niobate single crystal upon non-hydrostatic compression in a diamond anvil cell. The 3D TDBS experiments reveal, among others, modifications of the single crystal plate with initially plane-parallel surfaces, caused by non-hydrostatic compression, the laterally inhomogeneous variations of the plate thickness and relative inclination of opposite surfaces. Our experimental observations, supported by theoretical interpretation, indicate that TDBS enables the evaluation of materials interface orientation/inclination locally, from single point measurements, avoiding interface profilometry. A variety of observations reported in this paper paves the way to further expansion of the TDBS imaging use to analyze fascinating processes/phenomena occurring when materials are subjected to destruction., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 The Author(s).)

Picosecond laser ultrasonics is an all-optical experimental technique based on ultrafast high repetition rate lasers applied for the generation and detection of nanometric in length coherent acoustic pulses. In optically transparent materials these pulses can be detected not only on their arrival at the sample surfaces but also all along their propagation path inside the sample providing opportunity for imaging of the sample material spatial inhomogeneities traversed by the acoustic pulse. Application of this imaging technique to polycrystalline elastically anisotropic transparent materials subject to high pressures in a diamond anvil cell reveals their significant texturing/structuring at the spatial scales exceeding dimensions of the individual crystallites., (Copyright © 2016 Elsevier B.V. All rights reserved.)

The structure of the Ruddlesden-Popper layered perovskite Li2CaTa2O7, known for its high photocatalytic water activity since its discovery in 2008, is reinvestigated. This oxide has been characterized by powder X-ray and neutron thermodiffraction, TEM, second harmonic generation (SHG), and Raman experiments on powders and single crystals. It is shown that it undergoes two structural phase transitions (i) around 220 °C, mainly characterized by the progressive emergence of SHG signal at low temperatures, and (ii) at 660 °C, mainly characterized by changes of the temperature behavior of lattice parameters and by the emergence of Raman signals that linearly increase on decreasing temperature. It is shown by powder neutron diffraction profile refinements at RT, 400, and 800 °C that the space groups of the successive phases of Li2CaTa2O7 are the acentric Pna21 (RT ≤ T ≤ 220 °C), Pnma (220 °C ≤ T ≤ 660 °C), and Cmcm (T ≥ 660 °C). A soft mode associated with the transition to the highest symmetry for this structural arrangement (I4/mmm) is also found in the Raman spectra. All these transitions appear continuous: the high temperature ones can be attributed to progressive vanishings of the octahedra tiltings (displacives) while the transition in the vicinity of 220 °C from Pna21 to Pnma exhibits order-disorder character.

Monophasic Co-Al-CO3-like layered double hydroxides has been prepared by the coprecipitation method. It has been characterised by Rietveld refinement of the X-ray powder diffraction pattern, DTA-TGA, infrared and Raman spectroscopies. Its structure is trigonal, R3̅m with cell parameters a=0.3061(4) nm and c=2.252 (3) nm. The decomposition of this hydrotalcite-like structure on heating up to 800 °C yields to a single phase spinel oxide. Besides, infrared and Raman spectroscopies showed the presence of spinel-like domains. The results of Rietveld refinement have revealed that this compound has the Fd3̅m space group (a=0.8088(4) nm), with crystallographic formula [Co(II)0.75Al0.25](8a)[Co(II)0.252Co(III)0.77Al0.98](16d)O4, which is of the general formula Co1.77Al1.23O4. This structure is also validated by the charge distribution (CD) analysis., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The time-domain Brillouin scattering technique, also known as picosecond ultrasonic interferometry, allows monitoring of the propagation of coherent acoustic pulses, having lengths ranging from nanometres to fractions of a micrometre, in samples with dimension of less than a micrometre to tens of micrometres. In this study, we applied this technique to depth-profiling of a polycrystalline aggregate of ice compressed in a diamond anvil cell to megabar pressures. The method allowed examination of the characteristic dimensions of ice texturing in the direction normal to the diamond anvil surfaces with sub-micrometre spatial resolution via time-resolved measurements of the propagation velocity of the acoustic pulses travelling in the compressed sample. The achieved imaging of ice in depth and in one of the lateral directions indicates the feasibility of three-dimensional imaging and quantitative characterisation of the acoustical, optical and acousto-optical properties of transparent polycrystalline aggregates in a diamond anvil cell with tens of nanometres in-depth resolution and a lateral spatial resolution controlled by pump laser pulses focusing, which could approach hundreds of nanometres.

The phase transition at high temperature of bis-tetrapropylammoniumhexachlorostannate compound has been investigated by Raman spectroscopy as a function of temperature from 303 K to 393 K. While the bands mainly associated with the internal modes of the SnCl6 anions only undergo weak changes, strong evolutions of wavenumbers, widths and intensities of many lines associated with the organic cations are observed with discontinuities in the vicinity of the phase transition at 362 K. The most important changes are observed for two lines at 1137.5 cm(-1) and 1159.4 cm(-1) (at room temperature) issued from twisting of CH2 groups and skeletal deformation of the cations. The spectral characteristics of these lines are analyzed and consistently described in the framework of an order-disorder model for the phase transition. The temperature dependency of the reduced peak intensity allowed to determine the critical exponents and evolution of the correlation length on approaching the transition., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Dissolved inorganic carbon (DIC) content of aqueous systems is a key function of the pH, of the total alkanility (TA), and of the partial pressure of CO2. However, common analytical techniques used to determine the DIC content in water are unable to operate under high CO2 pressure. Here, we propose to use Raman spectroscopy as a novel alternative to discriminate and quantitatively monitor the three dissolved inorganic carbon species CO2(aq), HCO3(-), and CO3(2-) of alkaline solutions under high CO2 pressure (from P = 0 to 250 bar at T = 40 °C). In addition, we demonstrate that the pH values can be extracted from the molalities of CO2(aq) and HCO3(-). The results are in very good agreement with those obtained from direct spectrophotometric measurements using colored indicators. This novel method presents the great advantage over high pressure conventional techniques of not using breakable electrodes or reference additives and appears of great interest especially in marine biogeochemistry, in carbon capture and storage and in material engineering under high CO2 pressure.

Li(+)/H(+) exchange was performed on Li5La3Nb2O12 using CH3COOH. After X-ray powder diffraction experiments to check the quality of Li5-xHxLa3Nb2O12, the chemical formulation was determined by thermogravimetric analysis coupled with mass spectrometry and flame photometry. The results showed unambiguously that the Li(+)/H(+) exchange was not total and that some CH3COOH remained in the sample. Raman experiments revealed in addition that the organic contribution on the spectrum was due either to metal acetate or to ionic bond to the crystal.

Tetrapropylammoniumchloride was used as a ligand for the synthesis of the new organic-inorganic compound bis-tetrapropylammoniumhexachlorostannate. Vibrational study in the solid state was performed by FT-IR of the free Tetrapropylammoniumchloride ligand (TPACL) and by FT-IR and FT-Raman spectroscopies of the [N(C3H7)4]2SnCl6 compound. The comparative analysis of the Infrared spectra of the title compound with that of the free ligand was discussed. The structure of the [N(C3H7)4]2SnCl6 compound was optimized by density functional theory (DFT) using B3LYP method and shows that the calculated values obtained by B3LYP/LanL2MB basis are in much better agreement with the experimental data than those obtained by B3LYP/LanL2DZ. The vibrational frequencies were evaluated using density functional theory (DFT) with the standard B3LYP/LanL2MB basis, and were scaled using various scale factors. Root mean square (RMS) value was calculated and the small difference between experimental and calculated modes has been interpreted by intermolecular interactions in the crystal., (Copyright © 2013 Elsevier B.V. All rights reserved.)

We report a general and simple approach to take control of the color of light-emitting two-luminophore hybrid nanowires (NWs). Our strategy is based on the spatial control at the nanoscale (coaxial geometry) and the spectral selection of the two kinds of luminophores in order to restrict complex charge and energy transfers. Thus, it is possible to control the color of the photoluminescence (PL) as an interpolation of the CIE (Commission Internationale de l'Eclairage) coordinates of each luminophore. For this purpose, we selected a green-emitting semiconducting polymer and a red-emitting hexanuclear metal cluster compound, (n-Bu4N)2Mo6Br8F6, dispersed in a poly(methyl-methacrylate) (PMMA) matrix. The great potential and the versatility of this strategy have been demonstrated for two configurations. First, a yellow PL with a continuous change along the nanowire has been evidenced when the proportion of the PPV shell versus the nanocomposite core, that is, the green/red volumic ratio, progressively shifts from 1:2 to 1:5. Second, an extremely abrupt change in the PL color with red-green-yellow segments has been achieved. A simple model corroborates the effectiveness of this strategy. PL excitation and time-resolved experiments also confirm that no significant charge and energy transfers are involved. The two-luminophore hybrid nanowires may find widespread nanophotonic applications in multicolor emitting sources, lasers and chemical and biological sensors.