Search

Epoxide hydrolases are attractive and industrially important biocatalysts. They can catalyze the enantioselective hydrolysis of epoxides to the corresponding diols as chiral building blocks for bioactive compounds and drugs. In this review article, we discuss the state of the art and development potential of epoxide hydrolases as biocatalysts based on the most recent approaches and techniques. The review covers new approaches to discover epoxide hydrolases using genome mining and enzyme metagenomics, as well as improving enzyme activity, enantioselectivity, enantioconvergence, and thermostability by directed evolution and a rational design. Further improvements in operational and storage stabilization, reusability, pH stabilization, and thermal stabilization by immobilization techniques are discussed in this study. New possibilities for expanding the synthetic capabilities of epoxide hydrolases by their involvement in non-natural enzyme cascade reactions are described.

Screen-printing technology is a game changer in many fields including electrochemical biosensing. Two-dimensional nanomaterial MXene Ti 3 C 2 T x was integrated as a nanoplatform to immobilise enzyme sarcosine oxidase (SOx) onto the interface of screen-printed carbon electrodes (SPCEs). A miniaturised, portable, and cost-effective nanobiosensor was constructed using chitosan as a biocompatible glue for the ultrasensitive detection of prostate cancer biomarker sarcosine. The fabricated device was characterised with energy-dispersive X-ray spectroscopy (EDX), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). Sarcosine was detected indirectly via the amperometric detection of H 2 O 2 formed during enzymatic reaction. The nanobiosensor could detect sarcosine down to 7.0 nM with a maximal peak current output at 4.10 ± 0.35 × 10 -5 A using only 100 µL of a sample per measurement. The assay run in 100 μL of an electrolyte showed the first linear calibration curve in a concentration window of up to 5 μM with a slope of 2.86 μA·μM -1 , and the second linear calibration curve in the range of 5-50 μM with a slope of 0.32 ± 0.01 μA·μM -1 (R 2 = 0.992). The device provided a high recovery index of 92.5% when measuring an analyte spiked into artificial urine, and could be used for detection of sarcosine in urine for at least a period of 5 weeks after the preparation.

We present a complex analysis and optimisation of dynamic conditions in the environmental scanning electron microscope (ESEM) to allow in-situ observation of extremely delicate wet bio-polymeric spherical particles in their native state. According to the results of gas flow and heat transfer simulations, we were able to develop an improved procedure leading to thermodynamic equilibrium between the sample and chamber environment. To quantify and hence minimise the extent of any sample deformation during specimen chamber pumping, a strength-stress analysis is used. Monte Carlo simulations of beam-gas, -water, and -sample interactions describe beam scattering, absorbed energy, interaction volume and the emission of signal electrons in the ESEM. Finally, we discuss sample damage as a result of drying and the production of beam-induced free radicals. Based on all experimental and simulation results we introduce a Delicate Sample Observation Strategy for the ESEM. We show how this strategy can be applied to the characterization of polyelectrolyte complex spherical particles containing immobilized recombinant cells E. coli overexpressing cyclohexanone monooxygenase, used as a model biocatalyst. We present the first native-state electron microscopy images of the viscous core of a halved polyelectrolyte complex capsule containing living cells., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Viable microbial cells are important biocatalysts in the production of fine chemicals and biofuels, in environmental applications and also in emerging applications such as biosensors or medicine. Their increasing significance is driven mainly by the intensive development of high performance recombinant strains supplying multienzyme cascade reaction pathways, and by advances in preservation of the native state and stability of whole-cell biocatalysts throughout their application. In many cases, the stability and performance of whole-cell biocatalysts can be highly improved by controlled immobilization techniques. This review summarizes the current progress in the development of immobilized whole-cell biocatalysts, the immobilization methods as well as in the bioreaction engineering aspects and economical aspects of their biocatalytic applications.

Baeyer-Villiger monooxygenases (BVMOs) are a very well-known and intensively studied class of flavin-dependent enzymes. Their substrate promiscuity, high chemo-, regio-, and enantioselectivity are prerequisites for the use in synthetic chemistry and should pave the way for successful industrial processes. Nonetheless, only a very limited number of industrial relevant transformations are known, mainly due to the lack of BVMOs stability and cofactor dependency. In this review, we focus on novel BVMO-mediated transformations, BVMOs in cascade type reactions, potential industrial applications, and how limitations have been tackled by the community. Special attention will be put on whole-cell immobilization strategies. We emphasize to bridge recent developments in fundamental research to industrial applications.

A microbial biosensor for 2-phenylethanol (2-PE) based on the bacteria Gluconobacter oxydans was developed and applied in monitoring of a biotechnological process. The cells of G. oxydans were immobilized within a disposable polyelectrolyte complex gel membrane consisting of sodium alginate, cellulose sulphate and poly(methylene-co-guanidine) attached onto a miniaturized Clark oxygen electrode, forming whole cell amperometric biosensor. Measured changes in oxygen concentration were proportional to changes in 2-PE concentration. The biosensor sensitivity was 864 nA mM(-1) (RSD=6%), a detection limit of 1 μM, and the biosensor response towards 2-PE was linear in the range 0.02-0.70 mM. The biosensor preserved 93% of its initial sensitivity after 7h of continuous operation and exhibited excellent storage stability with loss of only 6% of initial sensitivity within two months, when stored at 4°C. The developed system was designed and successfully used for an off-line monitoring of whole course of 2-PE biooxidation process producing phenylacetic acid (PA) as industrially valuable aromatic compound. The biosensor measurement did not require the use of hazardous organic solvent. The biosensor response to 2-PE was not affected by interferences from PA and phenylacetaldehyde at concentrations present in real samples during the biotransformation and the results were in a very good agreement with those obtained via gas chromatography., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Direct comparison of key physical and chemical-engineering properties of two representative matrices for multipurpose immobilisations was performed for the first time. Polyvinyl alcohol lens-shaped particles LentiKats® and polyelectrolyte complex microcapsules were characterised by advanced techniques with respect to the size distribution of the particles, their inner morphology as revealed by fluorescent probe staining, mechanical resistance, size-exclusion properties, determination of effective diffusion coefficient and environmental scanning electron microscope imaging. While spherical polyelectrolyte complex microcapsules composed of a rigid semipermeable membrane and a liquid core are almost uniform in shape and size (diameter of 0.82 mm; RSD = 5.6 %), lens-shaped LentiKats® are characterised by wider size distribution (diameter of 3.65 mm; RSD = 10.3 % and height of 0.341 mm; RSD = 32.3 %) and showed the same porous structure throughout their whole volume at the mesoscopic (micrometre) level. Despite differences in their inner structure and surface properties, the pore diameter of ∼ 2.75 nm for regular polyelectrolyte complex microcapsules and ∼ 1.89 nm for LentiKats® were similar. These results were used for mathematical modelling, which provided the estimates of the effective diffusion coefficient of sucrose. This value was 1.67 × 10(-10) m(2) s(-1) for polyelectrolyte complex microcapsules and 0.36 × 10(-10) m(2) s(-1) for LentiKats®. Recombinant cells Escherichia coli-overexpressing enzyme cyclopentanone monooxygenase were immobilised in polyelectrolyte complex microcapsules and LentiKats® for comparison of their operational stability using model Baeyer-Villiger oxidation of (±)-cis-bicyclo [3.2.0] hept-2-en-6-one to regioisomeric lactones as important chiral synthons for potential pharmaceuticals. Both immobilisation matrices rendered high operational stability for whole-cell biocatalyst with no reduction in the biooxidation rate over 18 repeated reaction cycles.

A whole-cell amperometric biosensor consisting of genetically engineered Escherichia coli immobilised in polyelectrolyte membrane onto a miniaturised oxygen electrode was developed and used for monitoring of biotransformation based on Baeyer-Villiger oxidation. Baeyer-Villiger oxidation is commonly performed using microorganisms overexpressing Baeyer-Villiger monooxygenase enabling the production of enantiopure lactones or esters used in pharmaceutical industry. The biorecognition element, genetically modified E. coli overexpressing either cyclopentanone monooxygenase or cyclohexanone monooxygenase was immobilised in the form of solid polyelectrolyte complex gel membrane made of cellulose sulphate, sodium alginate and poly(methylene-co-guanidine) and attached to the surface of miniaturised oxygen electrode. The time response of the biosensor was 30s, the linear range of the calibration curve (R(2)=0.9993) was 8-130 μM and the sensitivity was 1.8 nA μM(-1) (RSD=5.0%) for substrate of Baeyer-Villiger oxidation (±)-cis-bicyclo[3.2.0]hept-2-en-6-one as analyte. The biosensor sensitivity was assessed for two other commercially available substrates, 4-methylcyclohexanone and 3-methylcyclohexanone. No interferences from ampicillin, citric acid, acetic acid, ethanol, methanol, glucose and products of Baeyer-Villiger oxidation (1R, 5S)-3-oxabicyclo[3.3.0]oct-6-en-2-one and (1S, 5R)-2-oxabicyclo[3.3.0]oct-6-en-3-one were detected. After 1 week of storage at 4°C the biosensor sensitivity was without changes. The biosensor was employed for monitoring of Baeyer-Villiger biotransformation and the results were correlated with gas chromatography. Till now, this is the first described biosensor based on Baeyer-Villiger monooxygenase and the first reported application of biosensor for monitoring of biotransformation based on Baeyer-Villiger oxidation., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Baeyer-Villiger biooxidation of 4-methylcyclohexanone-5-methyloxepane-2-one catalysed by recombinant Escherichia coli overexpressing cyclopentanone monooxygenase encapsulated in polyelectrolyte complex capsules was used to investigate effect of substrate conversion on the viability of cells. Confocal laser scanning microscopy (CLSM) was used to assess cell viability using propidium iodide fluorescence marker for necrosis, and flavin autofluorescence to identify living bacteria. Viability of encapsulated cells decreased with increasing substrate concentration from 99 ± 1 to 83 ± 4%, while substrate conversions from decreased 100 to 6 ± 1%. Storage stabilization of encapsulated cells was observed by increased substrate conversion form 68 ± 2 to 96 ± 3%. Measurements by CLSM with standard deviations up to 5% may be regarded as powerful tool for recombinant cell viability determination during Baeyer-Villiger biooxidations.

An original strategy for universal laboratory testing of Baeyer-Villiger monooxygenases based on continuous packed-bed minireactor connected with flow calorimeter and integrated with bubble-free oxygenation is reported. Model enantioselective Baeyer-Villiger biooxidations of rac-bicyclo[3.2.0]hept-2-en-6-one to corresponding lactones (1R,5S)-3-oxabicyclo-[3.3.0]oct-6-en-3-one and (1S,5R)-2-oxabicyclo-[3.3.0]oct-6-en-3-one as important chiral synthons for the synthesis of bioactive compounds were performed in the minireactor equipped with a column packed with encapsulated recombinant cells Escherichia coli overexpressing cyclohexanone monooxygenase. The cells were encapsulated in polyelectrolyte complex capsules formed by reaction of oppositely charged polymers utilizing highly reproducible and controlled encapsulation process. Encapsulated cells tested in minireactor exhibited high operational stability with 4 complete substrate conversions to products and 6 conversions above 80% within 14 repeated consecutive biooxidation tests. Moreover, encapsulated cells showed high enzyme stability during 91 days of storage with substrate conversions above 80% up to 60 days of storage. Furthermore, usable thermometric signal of Baeyer-Villiger biooxidation obtained by flow calorimetry using encapsulated cells was utilized for preparatory kinetic study in order to guarantee sub-inhibitory initial substrate concentration for biooxidation tests., (Copyright © 2011 Elsevier Inc. All rights reserved.)