Search

The biological invasion caused by the invasive macroalga Rugulopteryx okamurae is causing increasing concern in southern Europe. To reduce its impact, this brown alga can be treated from a biorefinery approach. In this study, the macroalga is used as raw material to obtain fermentable sugars, which can be converted into high value-added products. The alga was exposed to hydrothermal and hydrothermal acid pretreatment and the pretreated biomass was used for enzymatic hydrolysis, achieving a hydrolysate with a reducing sugar concentration of almost 25 g/L (49.2% more than with non-pretreated alga). In addition, the combined severity factor was calculated to identify the best pretreatment conditions, finding the optimum in those pretreatments performed with 0.2 N HCl concentration and 15 min reaction time. Based on the results, it would be interesting to carry out new studies using the saccharified medium obtained under optimal conditions to obtain value-added compounds by fermentation., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Rugulopteryx okamurae is an invasive brown alga causing severe environmental and economic problems on the western Mediterranean coasts. Thus, in addition to the difficulties caused to the fishing and tourism sectors, there is a need to manage its accumulation on the beaches. This work aims to valorise this waste by using it as raw material for producing monosaccharides through a two-stage sequential process. These sugars could be used for different fermentative processes to obtain high-value-added bioproducts. In this work, biological pretreatment of the previously conditioned seaweed with the fungus Aspergillus awamori in solid-state fermentation (SSF), followed by enzymatic hydrolysis with a commercial enzyme cocktail, was performed. The effect of the extension of the biological pretreatment (2, 5, 8 and 12 days) on the subsequent release of total reducing sugars (TRS) in the enzymatic hydrolysis stage was studied. To analyse this effect, experimental data of TRS produced along the hydrolysis were fitted to simple first-order kinetics. Also, the secretion of cellulase and alginate lyase by the fungus, along with the biological pretreatment, was determined. The results suggest that 5 days of biological pretreatment of the macroalgae with A. awamori followed by enzymatic saccharification for 24 h with Cellic CTec2® (112 FP units/g of dry biomass) are the best conditions tested, allowing the production of around 240 g of TRS per kg of dried biomass. The main sugars obtained were glucose (95.8 %) and mannitol (1.5 %), followed by galactose (1 %), arabinose (0.9 %) and fucose (0.5 %). KEY POINTS: • Five-day SSF by A. awamori was the best condition to pretreat R. okamurae. • Five-day SSF was optimal for alginate lyase production (1.63 ±0.011 IU/g biomass). • A maximum yield of 239 mg TRS/g biomass was obtained (with 95.8 % glucose)., (© 2023. The Author(s).)

Background: The use of IL-6 blockers in COVID-19 hospitalized patients has been associated with a reduction in mortality compared to standard care. However, many uncertainties remain pertaining to optimal intervention time, administration schedule, and predictors of response. To date, data on the use of subcutaneous sarilumab is limited and no randomized trial results are available., Methods: Open label randomized controlled trial at a single center in Spain. We included adult patients admitted with microbiology documented COVID-19 infection, imaging confirmed pneumonia, fever and/or laboratory evidence of inflammatory phenotype, and no need for invasive ventilation. Participants were randomly assigned to receive sarilumab, a single 400 mg dose in two 200 mg subcutaneous injections, added to standard care or standard care, in a 2:1 proportion. Primary endpoints included 30-day mortality, mean change in clinical status at day 7 scored in a 7-category ordinal scale ranging from death (category 1) to discharge (category 7), and duration of hospitalization. The primary efficacy analysis was conducted on the intention-to-treat population., Results: A total of 30 patients underwent randomization: 20 to sarilumab and 10 to standard care. Most patients were male (20/30, 67%) with a median (interquartile range) age of 61.5 years (56-72). At day 30, 2/20 (10%) patients died in the sarilumab arm vs. none (0/10) in standard care (Log HR 15.11, SE 22.64; p = 0.54). At day 7, no significant differences were observed in the median change in clinical status (2 [0-3]) vs. 3 [0-3], p = 0.32). Median time to discharge (days) was similar (7 [6-11] vs. 6 [4-12]; HR 0.65, SE 0.26; p = 0.27). No significant differences were detected in the rate of progression to invasive and noninvasive mechanical ventilation., Conclusions and Relevance: Our pragmatic pilot study has failed to demonstrate the benefit of adding subcutaneous sarilumab to standard care for mortality by 30 days, functional status at day 7, or hospital stay. Findings herein do not exclude a potential effect of sarilumab in severe COVID-19 but adequately powered blinded randomized phase III trials are warranted to assess the impact of the subcutaneous route and a more selected target population., Trial Registration: www.ClinicalTrials.gov, Identifier: NCT04357808., Competing Interests: RG-V reported receiving educational grants support from Lilly, Janssen, Pfizer, Roche, Sanofi, honoraria for presentations for Lilly, Sanofi, advisory boards for Lilly, Pfizer, Sanofi, nonfinancial support from Lilly, Pfizer, and Sanofi, all outside the present work. IG-A reported Roche provided him data for research, honoraria for presentations for Lilly, Roche, Sanofi, advisory boards for Lilly, Sanofi, non-financial support from Abbvie, BMS, MSD, Novartis, Pfizer and Roche, outside the present work. The remaining authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 García-Vicuña, Rodriguez-García, Abad-Santos, Bautista Hernández, García-Fraile, Barrios Blandino, Gutiérrez Liarte, Alonso-Pérez, Cardeñoso, Alfranca, Mejía-Abril, Sanz Sanz and González-Alvaro.)

Exhausted sugar beet pulp (ESBP), a by-product of the sugar industry, has been used as a substrate to produce lactic acid (LA). Due to the fact that ESBP contains a high percentage of pectin and hemicellulose, different pretreatments were studied to solubilize them and to facilitate the access to cellulose in the subsequent enzymatic hydrolysis. Several pretreatments were studied, specifically biological, oxidant with alkaline hydrogen peroxide (AHP), and thermochemical with acid (0.25, 0.5, or 1% w / v of H 2 SO 4 ). Pretreated ESBP was enzymatically hydrolysed and fermented with the strain Lactiplantibacillus plantarum for LA production. The hydrolysis was carried out with the commercial enzymes Celluclast ® , pectinase, and xylanase, for 48 h. After that, the hydrolysate was supplemented with yeast extract and calcium carbonate before the bacteria inoculation. Results showed that all the pretreatments caused a modification of the fibre composition of ESBP. In most cases, the cellulose content increased, rising from 25% to 68% when ESBP was pretreated thermochemically at 1% w / v H 2 SO 4 . The production of LA was enhanced when ESBP was pretreated thermochemically. However, it was reduced when biological and AHP pretreatments were applied. In conclusion, thermochemical pretreatment with 1% w / v H 2 SO 4 had a positive impact on the production of LA, increasing its concentration from 27 g/L to 50 g/L.

Background: Exhausted sugar beet pulp pellets (ESBPP) were used as raw material for lactic acid (LA) fermentation. The enzymatic hydrolysis of ESBPP was performed with the solid obtained after the fungal solid-state fermentation of ESBPP as a source of hydrolytic enzymes. Subsequently, a medium rich in glucose and arabinose was obtained, which was used to produce LA by fermentation. For LA production, two Lactobacillus strains were assayed and the effects of the supplementation of the hydrolysate with a nitrogen source and the mode of pH regulation of the fermentation were investigated. Moreover, a kinetic model for LA fermentation by Lactobacillus plantarum of ESBPP hydrolysates was developed., Results: L. plantarum produced a LA concentration 34% higher than that produced by L. casei. The highest LA concentration (30 g L -1 ) was obtained with L. plantarum when the hydrolysate was supplemented with 5 g L -1 yeast extract and the pH was controlled with CaCO 3 . The concentration of acetic acid differed depending on the concentration of CaCO 3 added, producing its maximum value with 27 g L -1 CaCO 3 . The proposed kinetic model was able to predict the evolution of substrates and products depending on the variation of the pH in the hydrolysate, according to the amount of CaCO 3 added., Conclusions: ESBPP can be revalorised to produce LA. A pure LA stream or a mixture of LA and acetic acid, depending on the pH control method of the fermentation, can be produced. Thus, this control is of great interest depending on the destination of the effluent. © 2020 Society of Chemical Industry., (© 2020 Society of Chemical Industry.)

In this study, the production of a hydrolysate rich in fermentable sugars, which could be used as a generic microbial culture medium, was carried out by using exhausted sugar beet pulp pellets (ESBPPs) as raw material. For this purpose, the hydrolysis was performed through the direct addition of the fermented ESBPPs obtained by fungal solid-state fermentation (SSF) as an enzyme source. By directly using this fermented solid, the stages for enzyme extraction and purification were avoided. The effects of temperature, fermented to fresh solid ratio, supplementation of fermented ESBPP with commercial cellulase, and the use of high-solid fed-batch enzymatic hydrolysis were studied to obtain the maximum reducing sugar (RS) concentration and productivity. The highest RS concentration and productivity, 127.3 g·L -1 and 24.3 g·L -1 ·h -1 respectively, were obtained at 50 °C and with an initial supplementation of 2.17 U of Celluclast ® per gram of dried solid in fed-batch mode. This process was carried out with a liquid to solid ratio of 4.3 mL·g -1 solid, by adding 15 g of fermented solid and 13.75 g of fresh solid at the beginning of the hydrolysis, and then the same amount of fresh solid 3 times every 2.5 h. By this procedure, ESBPP can be used to produce a generic microbial feedstock, which contains a high concentration of monosaccharides.

Background: Exhausted sugar beet pulp pellets (ESBPP), a sugar industry by-product generated after sugar extraction in the sugar production process, have been used as a raw material for lactic acid (LA) production via hydrolysis and fermentation by Lactobacillus casei. To design a more cost-effective process, simultaneous saccharification and fermentation (SSF) of ESBPP is proposed in the present study. The effects of pH control, nutrient supplementation and solid addition in fed-batch SSF on lactic acid production were investigated., Results: The highest LA concentration (26.88 g L -1 ) was reached in fed-batch SSF at a solid/liquid loading of 0.2 g mL -1 , with pH control (by adding 30 g L -1 CaCO 3 to the medium) and nutrient supplementation (by adding 20 mL of MRS medium per 100 mL of buffer). Under these conditions, a maximum productivity of 0.63 g L -1 h -1 was achieved, which is 2.7 times higher than that attained in the control experiment (SSF inoculated at time 0 h). However, a slightly lower LA yield was obtained, revealing the need of an increasing dose of enzymes at high solid loading SSF., Conclusion: An efficient fed-batch SSF strategy with pH control and MRS supplementation is described in the present study, attaining higher LA productivity compared to separate hydrolysis and fermentation and SSF. © 2020 Society of Chemical Industry., (© 2020 Society of Chemical Industry.)

In this chapter, protocols and details for the immobilization of a model cell onto polyurethane foam carriers are provided in order to facilitate the use of such systems in laboratory or industrial reactors. Polyurethane foam has recently acquired great relevance as a carrier for its good mechanical properties, high porosity, and large adsorption surface. In addition, it has a very low commercial cost. Two different immobilization protocols have been described, differing in the flow regime or the possibilities for the reactor: immobilization in a stirred tank reactor working in a discontinuous regime (by cycles) and immobilization in a packed column working in continuous operation mode. Protocols for carrier sterilization, analytical methodology, and immobilization are described.

Background: Considering the large amounts of by-products derived from orange processing, which are generally discarded, the present study aimed to explore the feasibility of using orange peel for lactic acid production in solid state fermentation., Results: Different species of lactic acid bacteria were employed, singly and in co-culture, to evaluate their ability to ferment orange peel and produce lactic acid. Among the single cultures tested, Lactobacillus casei 2246 was the most efficient strain, reaching the highest concentration of lactic acid (209.65 g kg -1 ) and yield (0.88 g g -1 ). The use of Lactobacillus plantarum 285 and Lactobacillus paracasei 4186 in co-culture produced a comparable amount of lactic acid, showing a better performance than the same strains in single cultures., Conclusion: Orange peels represent a suitable raw material for solid state fermentation employing lactic acid bacteria. Lactic acid was obtained that consumed the most of sugars available, leading to high yields. Despite all the strains tested showing the same growth ability, different peculiarities in lactic acid production were revealed, dependent on the species/strains, suggesting the relevance of strain selection. © 2019 Society of Chemical Industry., (© 2019 Society of Chemical Industry.)

A simple kinetic model, with only three fitting parameters, for several enzyme productions in Petri dishes by solid-state fermentation is proposed in this paper, which may be a valuable tool for simulation of this type of processes. Basically, the model is able to predict temporal fungal enzyme production by solid-state fermentation on complex substrates, maximum enzyme activity expected and time at which these maxima are reached. In this work, several fermentations in solid state were performed in Petri dishes, using four filamentous fungi grown on different agro-industrial residues, measuring xylanase, exo-polygalacturonase, cellulose and laccase activities over time. Regression coefficients after fitting experimental data to the proposed model turned out to be quite high in all cases. In fact, these results are very interesting considering, on the one hand, the simplicity of the model and, on the other hand, that enzyme activities correspond to different enzymes, produced by different fungi on different substrates.

A pretreatment with microwave irradiation was applied to enhance enzyme hydrolysis of corn straw and rice husk immersed in water, aqueous glycerol or alkaline glycerol. Native and pretreated solids underwent enzyme hydrolysis using the extract obtained from the fermentation of Myceliophthora heterothallica, comparing its efficiency with that of the commercial cellulose cocktail Celluclast®. The highest saccharification yields, for both corn straw and rice husk, were attained when biomass was pretreated in alkaline glycerol, method that has not been previously reported in literature. Moreover, FTIR, TG and SEM analysis revealed a more significant modification in the structure of corn straw subjected to this pretreatment. Highest global yields were attained with the crude enzyme extract, which might be the result of its content in a great variety of hydrolytic enzymes, as revealed zymogram analysis. Moreover, its hydrolysis efficiency can be improved by its supplementation with commercial β-glucosidase., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

In this work, tomato pomace, a waste abundantly available in the Mediterranean and other temperate climates agro-food industries, has been used as raw material for the production of some hydrolytic enzymes, including xylanase, exo-polygalacturonase (exo-PG), cellulase (CMCase) and α-amylase. The principal step of the process is the solid state fermentation (SSF) of this residue by Aspergillus awamori. In several laboratory experiments, maximum xylanase and exo-PG activities were measured during the first days of culture, reaching values around 100 and 80 IU/gds (international units of enzyme activity per gram of dried solid), respectively. For CMCase and α-amylase production remained almost constant along fermentation, with average values of 19 and 21.5 IU/gds, respectively. Experiments carried out in a plate-type bioreactor at lab scale showed a clear positive effect of aeration on xylanase and CMCase, while the opposite was observed for exo-PG and α-amylase. In general, xylanase was the enzyme produced in higher levels, thus the optimum conditions for the determination of the enzyme activity was characterized. The xylanase activity shows an optimum pH of 5 and an optimum temperature of 50 ºC. The enzyme is activated by Mg(2+), but strongly inhibited by Hg(2+) and Cu(2+). The enzymatic activity remains quite high if the extract is preserved in a range of pH from 3 to 10 and a temperature between 30 ºC to 40 ºC.