Search

The spectral quality of sunlight reaching plants remains a path for optimization in greenhouse cultivation. Quantum dots represent a novel, emission-tunable luminescent material for optimizing the sunlight spectrum in greenhouses with minimal intensity loss, ultimately enabling improved light use efficiency of plant growth without requiring electricity. In this study, greenhouse films containing CuInS 2 /ZnS quantum dots were utilized to absorb and convert ultraviolet and blue photons from sunlight to a photoluminescent emission centered at 600 nm. To analyze the effects of the quantum dot film spectrum on plant production, a 25-week tomato trial was conducted in Dutch glass greenhouses. Plants under the quantum dot film experienced a 14% reduction in overall daily light integral, resulting from perpendicular photosynthetically active radiation transmission of 85.3%, mainly due to reflection losses. Despite this reduction in intensity, the modified sunlight spectrum and light diffusion provided by the quantum dot film gave rise to 5.7% improved saleable production yield, nearly identical total fruiting biomass production, 23% higher light use efficiency (g/mol), 10% faster vegetative growth rate, and 36% reduced tomato waste compared to the control, which had no additional films. Based on this result, materials incorporating quantum dots show promise in enabling passive, electricity-free spectrum modification for improving crop production in greenhouse cultivation, but extensive controlled crop studies are needed to further validate their effectiveness., Competing Interests: DH, CP, KR, NM, CC, HM, and MB were employed by the company UbiQD, Inc. The remaining authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Hebert, Boonekamp, Parrish, Ramasamy, Makarov, Castañeda, Schuddebeurs, McDaniel and Bergren.)

While luminescent solar concentrators (LSCs) have been researched for several decades, there is still a lack of commercially available systems, mostly due to scalability, performance, aesthetics, or some combination of these challenges. These obstacles can be overcome by the systematic optimization of a laminated glass LSC design, demonstrated herein. In particular, we first show that it is possible to improve optical and electrical efficiencies of an LSC by fine-tuned optimization of the constituent fluorophore-containing interlayer resin. Further still, an increased understanding of commercially available solar cells allows us to establish a direct correlation between the device's optical and electrical efficiency. Next, optical characterization of LSCs of varying sizes allows us to elucidate the main loss mechanisms in our LSCs, as well as ways to mitigate them. Altogether these optimization steps create opportunities for high-performance multi-interlayer LSC devices with demonstrated electrical power conversion efficiency as high as 1.1% to 4.9% at visual light transmission of 74% to 5%. Furthermore, careful examination of different blue-color (red-band absorbing) dyes provides a path for color-tunability of LSC windows toward neutral regimes. Design iterations of multiple device form factors enabled a color-neutral prototype without significant performance losses by separating color-neutralizing and LSC layers into different panes of an insulated glass unit. This work demonstrates the importance of LSC design optimization in achieving high-performance solar window technology with commercially acceptable aesthetics.

Bioregenerative life-support systems (BLSS) involving plants will be required to realize self-sustaining human settlements beyond Earth. To improve plant productivity in BLSS, the quality of the solar spectrum can be modified by lightweight, luminescent films. CuInS 2 /ZnS quantum dot (QD) films were used to down-convert ultraviolet/blue photons to red emissions centered at 600 and 660 nm, resulting in increased biomass accumulation in red romaine lettuce. All plant growth parameters, except for spectral quality, were uniform across three production environments. Lettuce grown under the 600 and 660 nm-emitting QD films respectively increased edible dry mass (13 and 9%), edible fresh mass (11% each), and total leaf area (8 and 13%) compared with under a control film containing no QDs. Spectral modifications by the luminescent QD films improved photosynthetic efficiency in lettuce and could enhance productivity in greenhouses on Earth, or in space where, further conversion is expected from greater availability of ultraviolet photons.

Carrier multiplication (CM) is a process in which high-energy free carriers relax by generation of additional electron-hole pairs rather than by heat dissipation. CM is promising disruptive improvements in photovoltaic energy conversion and light detection technologies. Current state-of-the-art nanomaterials including quantum dots and carbon nanotubes have demonstrated CM, but are not satisfactory owing to high-energy-loss and inherent difficulties with carrier extraction. Here, we report CM in van der Waals (vdW) MoTe 2 and WSe 2 films, and find characteristics, commencing close to the energy conservation limit and reaching up to 99% CM conversion efficiency with the standard model. This is demonstrated by ultrafast optical spectroscopy with independent approaches, photo-induced absorption, photo-induced bleach, and carrier population dynamics. Combined with a high lateral conductivity and an optimal bandgap below 1 eV, these superior CM characteristics identify vdW materials as an attractive candidate material for highly efficient and mechanically flexible solar cells in the future.

While luminescent concentrators (LCs) are mainly designed to harvest sunlight and convert its energy into electricity, the same concept can be advantageous in alternative applications. Examples of such applications are demonstrated here by coupling the edge-guided light of high-performance LCs based on CuInSe x S 2 - x /ZnS quantum dots into optical fibers with emission covering visible-to-NIR spectral regions. In particular, a cost-efficient, miniature broadband light source for medical diagnostics, a spectral-conversion and light-guiding device for agriculture, and a large-area broadband tunable detector for telecommunications are demonstrated. Various design considerations and performance optimization approaches are discussed and summarized. Prototypes of the devices are manufactured and tested. Individual elements of the broadband light source show coupling efficiencies up to 1%, which is sufficient to saturate typical fiber-coupled spectrometers at a minimal integration time of 1 ms using 100 mW blue excitation. Agricultural devices are capable of delivering ∼10% of photosynthetically active radiation (per device) converted from absorbed sunlight to the lower canopy of plants, which boosted the tomato yield in a commercial greenhouse by 7% (fresh weight). Finally, large-scale prototype detectors can be used to discern time-modulated unfocused signals with an average power as low as 1 μW, which would be useful for free-space telecommunication systems. Fully optimized devices are expected to make significant impacts on speed and bandwidth of free-space telecommunication systems, medical diagnostics, and greenhouse crop yields.

We report size-dependent exciton formation dynamics within colloidal silicon quantum dots (Si QDs) using time-resolved terahertz (THz) spectroscopy measurements. THz photoconductivity measurements are used to distinguish the initially created hot carriers from excitons that form at later times. At early pump/probe delays, the exciton formation dynamics are revealed by the temporal evolution of the THz transmission. We find an increase in the exciton formation time, from ∼500 to ∼900 fs, as the Si QD diameter is reduced from 7.3 to 3.4 nm and all sizes exhibit slower hot-carrier relaxation times compared to bulk Si. In addition, we determine the THz absorption cross section at early delay times is proportional to the carrier mobility while at later delays is proportional to the exciton polarizability, αX. We extract a size-dependent αX and find an ∼r(4) dependence, consistent with previous reports for quantum-confined excitons in CdSe, InAs, and PbSe QDs. The observed slowing in exciton formation time for smaller Si QDs is attributed to decreased electron-phonon coupling due to increased quantum confinement. These results experimentally verify the modification of hot-carrier relaxation rates by quantum confinement in Si QDs, which likely plays a significant role in the high carrier multiplication efficiency observed in these nanomaterials.

We simultaneously determined the charge carrier mobility and picosecond to nanosecond carrier dynamics of isolated silicon nanowires (Si NWs) and nanocrystals (Si NCs) using time-resolved terahertz spectroscopy. We then compared these results to data measured on bulk c-Si as a function of excitation fluence. We find >1 ns carrier lifetimes in Si NWs that are dominated by surface recombination with surface recombination velocities (SRV) between ∼1100-1700 cm s(-1) depending on process conditions. The Si NCs have markedly different decay dynamics. Initially, free-carriers are produced, but relax within ∼1.5 ps to form bound excitons. Subsequently, the excitons decay with lifetimes >7 ns, similar to free carriers produced in bulk Si. The isolated Si NWs exhibit bulk-like mobilities that decrease with increasing excitation density, while the hot-carrier mobilities in the Si NCs are lower than bulk mobilities and could only be measured within the initial 1.5 ps decay. We discuss the implications of our measurements on the utilization of Si NWs and NCs in macroscopic optoelectronic applications.

We have synthesized alkylselenide reagents to replace the native oleate ligand on PbSe quantum dots (QDs) in order to investigate the effect of surface modification on their stoichiometry, photophysics, and air stability. The alkylselenide reagent removes all of the oleate on the QD surface and results in Se addition; however, complete Se enrichment does not occur, achieving a 53% decrease in the amount of excess Pb for 2 nm diameter QDs and a 23% decrease for 10 nm QDs. Our analysis suggests that the Se ligand preferentially binds to the {111} faces, which are more prevalent in smaller QDs. We find that attachment of the alkylselenide ligand to the QD surface enhances oxidative resistance, likely resulting from a more stable bond between surface Pb atoms and the alkylselenide ligand compared to Pb-oleate. However, binding of the alkylselenide ligand produces a separate nonradiative relaxation route that partially quenches PL, suggesting the formation of a dark hole-trap.