Search

Objective: Age-at-death estimation is usually done manually by experts. As such, manual estimation is subjective and greatly depends on the past experience and proficiency of the expert. This becomes even more critical if experts need to evaluate individuals with unknown population affinity or with affinity that they are not familiar with. The purpose of this study is to design a novel age-at-death estimation method allowing for automatic evaluation on computers, thus eliminating the human factor., Methods: We used a traditional machine-learning approach with explicit feature extraction. First, we identified and described the features that are relevant for age-at-death estimation. Then, we created a multi-linear regression model combining these features. Finally, we analysed the model performance in terms of Mean Absolute Error (MAE), Mean Bias Error (MBE), Slope of Residuals (SoR) and Root Mean Squared Error (RMSE)., Results: The main result of this study is a population-independent method of estimating an individual's age-at-death using the acetabulum of the pelvis. Apart from data acquisition, the whole procedure of pre-processing, feature extraction and age estimation is fully automated and implemented as a computer program. This program is a part of a freely available web-based software tool called CoxAGE3D, which is available at https://coxage3d.fit.cvut.cz/. Based on our dataset, the MAE of the presented method is about 10.7 years. In addition, five population-specific models for Thai, Lithuanian, Portuguese, Greek and Swiss populations are also given. The MAEs for these populations are 9.6, 9.8, 10.8, 10.5 and 9.2 years, respectively. Our age-at-death estimation method is suitable for individuals with unknown population affinity and provides acceptable accuracy. The age estimation error cannot be completely eliminated, because it is a consequence of the variability of the ageing process of different individuals not only across different populations but also within a certain population., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this study we tested classification performance of a sex estimation method from the mandible originally developed by Sella-Tunis et al. (2017) on a heterogeneous Israeli population. Mandibular linear dimensions were measured on 60 CT scans derived from the Czech living population. Classification performance of Israeli discriminant functions (DFs-IL) was analyzed in comparison with calculated Czech discriminant functions (DFs-CZ) while different posterior probability thresholds (currently discussed in the forensic literature) were employed. Our results comprehensively illustrate sensitivity of different discriminant functions to population differences in body size and degree of sexual dimorphism. We demonstrate that the error rate may be biased when presented per posterior probability threshold. DF-IL 1 showed least sensitivity to population origin and fulfilled criteria of sufficient classification performance when applied on the Czech sample with a minimum posterior probability threshold of 0.88 reaching overall accuracy ≥ 95%, zero sex bias, and 80% of classified individuals. The last parameter was higher in DF-CZ 1 which was the main difference between those two DFs suggesting relatively low dependance on population origin. As the use of population-specific methods is often prevented by complicated assessment of population origin, DF-IL 1 is a candidate for a sufficiently robust method that could be reliably applied outside the reference sample, and thus, its classification performance deserves further testing on more population samples., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

An increasing number of software tools can be used in forensic anthropology to estimate a biological profile, but further studies in other populations are required for more robust validation. The present study aimed to evaluate the validity of MorphoPASSE software for sex estimation from sexually dimorphic cranial traits recorded on 3D CT models (n = 180) from three populations samples (Czech, French, and Egyptian). Two independent observers performed scoring of 4 cranial traits (2 of them bilateral) in each population sample of 30 males and 30 females. The accuracy of sex estimation using traditional posterior probability threshold (pp = 0.5) ranged from 85.6% to 88.3% and overall classification error from 14.4% to 11.7% for both observers, and corresponds to the previously published values of the method. The MorphoPASSE method is also affected by the subjectivity of the observers, as both observers show agreement in sex assignment in 83.9% of cases, regardless of the accuracy of the estimates. Applying a higher posterior probability threshold (pp 0.95) provided classification accuracy of 97.9% and 93.3% of individuals (for observer A and B respectively), minimizing the risk of error to 2.1% and 6.7%, respectively. However, sex estimation can only be applied to 54% and 66% of individuals, respectively. Our results demonstrate the validity of the MorphoPASSE software for cranial sex estimation outside the reference population. However, the achieved classification success is accompanied by a high risk of errors, the reduction of which is only possible by increasing the posterior probability threshold., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Men with writing proficiency enjoyed a privileged position in ancient Egyptian society in the third millennium BC. Research focusing on these officials of elevated social status ("scribes") usually concentrates on their titles, scribal statues, iconography, etc., but the individuals themselves, and their skeletal remains, have been neglected. The aim of this study is to reveal whether repetitive tasks and maintained postures related to scribal activity can manifest in skeletal changes and identify possible occupational risk factors. A total of 1767 items including entheseal changes, non-metric traits, and degenerative changes were recorded from the human remains of 69 adult males of well-defined social status categories from the necropolis at Abusir (2700-2180 BC). Statistically significant differences between the scribes and the reference group attested a higher incidence of changes in scribes and manifested themselves especially in the occurrence of osteoarthritis of the joints. Our research reveals that remaining in a cross-legged sitting or kneeling position for extended periods, and the repetitive tasks related to writing and the adjusting of the rush pens during scribal activity, caused the extreme overloading of the jaw, neck and shoulder regions., (© 2024. The Author(s).)

Objective: The aim of the study was to evaluate the pathological conditions in teeth from skeletal remains found in the medieval burial ground at Kutná Hora (13th-16th centuries, Czech Republic). We focused on the effect on dental health of socioeconomic changes associated with the boom in silver mining at the site., Design: In this study, dental caries and antemortem tooth loss were recorded for 469 sexed adults (10,558 permanent teeth). Pathologies were analysed and presented by teeth and alveoli, and the differences between their frequencies were tested in sex-, age-, and burial context-separated groups (mass vs. individual graves)., Results: The oral conditions were characterised by a low frequency of caries and moderate frequency of antemortem tooth loss (AMTL). For caries, males and females showed the same frequencies while AMTL comparisons indicated a higher rate in females. Most differences emerged between age-separated and burial context-separated groups. The age progression of the pathologies was confirmed for both caries and AMTL. Skeletons from mass burials had higher caries and AMTL frequencies than those buried in individual graves., Conclusions: The dataset exhibited low caries and below average AMTL rates compared to other medieval European skeletal series. We think that life in this mining centre had a positive effect on the dental health of its inhabitants. The relatively poorer dental health of those buried in mass graves reflected either the specific composition of the population in the first half of the 14th century or the lower resilience of these individuals when facing mortality crises., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Sex estimation is one of the crucial trends in cases of findings of unknown skeletal remains in forensics and bioarchaeology. The changing nature of sexual dimorphism (population specificity, secular trend, other external and internal factors influence) brings challenges to developing new methods; and there are new aims to be independent of these changes such, as the method by Musilová et al. (2016). These methods need to be evaluated on different datasets to determine if they are truly reliable among populations from different places and times, in the case of bioarchaeology. This study assessed the application of the aforementioned method on non-European contemporary and ancient populations to identify the reliability of the method on this separate dataset. The study sample consisted of 96 CT scans of skulls from contemporary Egyptians and 54 3D models of skulls from the Egyptian Old Kingdom Period (2700-2180 BC). The classifier method, previously tested on both Czech and French populations, yielded high accuracies (over 90 %) for sex estimation. For the contemporary Egyptian skull sample, the classifier was able to determine males versus females with an 89.59 % accuracy rate and an AUC value (area under the curve - a measure of the combined specificity and sensitivity of the test) of 0.99; this proves that the classifier is reliable even with a lower degree of accuracy. Conversely, the Old Kingdom Period sample yielded a lower level of accuracy at around 70 % (61.11 %, precisely), although with an AUC value of 0.92, the result is not considered reliable., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

This work presents an automated data-mining model for age-at-death estimation based on 3D scans of the auricular surface of the pelvic bone. The study is based on a multi-population sample of 688 individuals (males and females) originating from one Asian and five European identified osteological collections. Our method requires no expert knowledge and achieves similar accuracy compared to traditional subjective methods. Apart from data acquisition, the whole procedure of pre-processing, feature extraction and age estimation is fully automated and implemented as a computer program. This program is a part of a freely available web-based software tool called CoxAGE3D. This software tool is available at https://coxage3d.fit.cvut.cz/ Our age-at-death estimation method is suitable for use on individuals with known/unknown population affinity and provides moderate correlation between the estimated age and actual age (Pearson's correlation coefficient is 0.56), and a mean absolute error of 12.4 years., Competing Interests: Declaration of Competing Interest None., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Objectives: The study followed the modelling of postnatal growth of a healthy palate of the Central European (Czech) population sample based on transverse data on sex and age from 6 to 19 years., Materials and Methods: Digitised 3D models of 212 healthy palatal surfaces were evaluated using 3D geometric morphometrics and superimpositions. The individuals were grouped based on age (preschool, younger and older school age, younger and older adolescents, young adults) and sex (♂ n = 101, ♀ n = 111)., Results: Female palatal development was non-linear and was interrupted between the 10-12 years and then proceeded intensively until the age of 15 when it ceased. In contrast, male-modelled growth was consistent throughout the follow-up and continued linearly until at least 19 years of age. The palate did not widen further with increasing age, and primarily palatal vaulting and heightening were found. The characteristics and distribution of areas with extensive modelled growth changes were comparable in females and males, as confirmed by the location of principal components (PC1 and PC2) within modal space and growth trajectories. The extent of sexual dimorphism increased from 15 years of age due to pubertal spurt combined with earlier completion of palatal development in females., Conclusions: The study showed modelled healthy palatal development from 6 years of age to early adulthood, which might be utilised as reference standards for the Central European population sample., Clinical Relevance: The comparison of normal reference subjects with patients with cranio-maxillo-facial dysmorphologies represents the first step in diagnosing and establishing effective therapy., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Biomechanical load and hormonal levels tended to change just like the soft and skeletal tissue of the elderly with age. Although aging in both sexes shared common traits, it was assumed that there would be a reduction of sexual dimorphism in aged individuals. The main goals of this study were (1) to evaluate age-related differences in cranial sexual dimorphism during senescence, (2) to determine age-related differences in female and male skulls separately, and (3) to compare skull senescence in Czech and French adult samples as discussed by Musilová et al. (Forensic Sci Int 269:70-77, 2016). The cranial surface was analyzed using coherent point drift-dense correspondence analysis. The study sample consisted of 245 CT scans of heads from recent Czech (83 males and 59 females) and French (52 males and 51 females) individuals. Virtual scans in the age range from 18 to 92 years were analyzed using geometric morphometrics. The cranial form was significantly greater in males in all age categories. After size normalization, sexual dimorphism of the frontal, occipital, and zygomatic regions tended to diminish in the elderly. Its development during aging was caused by morphological changes in both female and male skulls but secular changes must also be taken into account. The most notable aging changes were the widening of the neurocranium and the retrusion of the face, including the forehead, especially after the age of 60 in both sexes. Sexual dimorphism was similar between the Czech and French samples but its age-related differences were partially different because of the population specificity. Cranial senescence was found to degrade the accuracy of sex classification (92-94%) in the range of 2-3%., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

The skull, along with the pelvic bone, serves an important source of clues as to the sex of human skeletal remains. The frontal bone is one of the most significant sexually dimorphic structures employed in anthropological research, especially when studied by methods of virtual anthropology. For this reason, many new methods have been developed, but their utility for other populations remains to be verified. In the present study, we tested one such approach-the landmark-free method of Bulut et al. (2016) for quantifying sexually dimorphic differences in the shape of the frontal bone, developed using a sample of the Turkish population. Our study builds upon this methodology and tests its utility for the Czech population. We evaluated the shape of the male and female frontal bone using 3D morphometrics, comparing virtual models of frontal bones and corresponding software-generated spheres. To do so, we calculated the relative size of the frontal bone area deviating from the fitted sphere by less than 1 mm and used these data to estimate the sex of individuals. Using our sample of the Czech population, the method estimated the sex correctly in 72.8% of individuals. This success rate is about 5% lower than that achieved with the Turkish sample. This method is therefore not very suitable for estimating the sex of Czech individuals, especially considering the significantly greater success rates of other approaches., (© 2020 American Academy of Forensic Sciences.)

This paper introduces an automated method for estimating sex from cranial sex diagnostic traits by extracting and evaluating specialized morphometric features from the glabella, the supraorbital ridge, the occipital protuberance, and the mastoid process. The proposed method was developed and evaluated using two European population samples, a Czech sample comprising 170 crania reconstructed from anonymized CT scans and a Greek sample of 156 crania from the Athens Collection. It is based on a fully automatic algorithm applied on 3D models for extracting sex diagnostic morphometric features which are further processed by computer vision and machine learning algorithms. Classification accuracy was evaluated in a population specific and a population generic 2-way cross-validation scheme. Population-specific accuracy for individual morphometric features ranged from 78.5 to 96.7%, whereas population generic correct classification ranged from 71.7 to 90.8%. Combining all sex diagnostic traits in multi-feature sex estimation yielded correct classification performance in excess of 91% for the entire sample, whereas the sex of about three fourths of the sample could be determined with 100% accuracy according to posterior probability estimates. The proposed method provides an efficient and reliable way to estimate sex from cranial remains, and it offers significant advantages over existing methods. The proposed method can be readily implemented with the skullanalyzer computer program and the estimate_sex.m GNU Octave function, which are freely available under a suitable license.

Sex estimation is a task of utmost importance in forensic anthropology and bioarcheology. Along with the pelvic bone, the skull is the most important source of sexual dimorphism. On the human skull, the upper third of the face (i.e., the frontal bone) is one of the most significant sexually dimorphic structures useful in anthropological research, especially when studied by methods of virtual anthropology. This study was focused on sex estimation using the form and shape of the external surface of the frontal bone with or without the inclusion of its sinuses. The study sample consisted of 103 cranial CT images from a contemporary Czech population. Three-dimensional virtual models of the frontal bones and sinuses were analyzed using geometric morphometrics and multidimensional statistics: coherent point drift-dense correspondence analysis (CPD-DCA), principal component analysis (PCA), and support vector machine (SVM). The whole external frontal surface was significantly different between males and females both in form and shape. The greatest total success rate of sex estimation based on form was 93.2%, which decreased to 86.41% after crossvalidation, and this model identified females and males with the same accuracy. The best estimation based on shape reached a success rate of 91.26%, with slightly greater accuracy for females. After crossvalidation, however, the success rate decreased to 83.49%. The differences between sexes were significant also in the volume and surface of the frontal sinuses, but the sex estimation had only 64.07% accuracy after crossvalidation. Simultaneous use of the shape of the frontal surface and the frontal sinuses improved the total success rate to 98.05%, which decreased to 84.46% after crossvalidation.

Assessing sex and population affinity is an important part of the process of biologically identifying unknown human remains, and the skull is usually one of the best structures for assessing both these components of the biological profile. Population affinity is known to be a hugely important variable when estimating sex because the manifestation of sexually dimorphic traits, body size or social and behavioural habits differs across populations. Therefore, for forensic purposes, the estimation of ancestry is a necessary step in the identification of bone remains. The present study improves on the results of a previously developed virtual method using the exocranial surface for sex estimation and assessing population affinity. The ability to assess these components of the biological profile was successfully tested on 208 individuals from two recent European populations. The original classifier was based on geometric morphometric analyses (CPD-DCA, PCA, SVM) and was able to assess the sex of individuals belonging to one French population with an accuracy exceeding 90 % Musilová et al. [1]. To improve the reliability of the method, the Czech population sample was added to the dataset, yielding the highest accuracy of 96.2 %; using the combined dataset, the reliability of the method was 91.8 %. Secondly, we used the same method utilizing inter-population differences to classify individuals based on the shape of the skull. The greatest accuracy rate was 92.8 %, which makes our method a promising tool for sex estimation and assessing population affinity., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Objectives: This prospective morphometric study evaluated the growth of the upper dental arch in UCLP patients after early neonatal cheiloplasty and compared the selected dimensions with published data on non-cleft controls and on later operation protocol patients., Methods: The sample comprised 36 Czech children with nonsyndromic complete UCLP (cUCLP) and 20 Czech children with nonsyndromic incomplete UCLP (UCLP + b). 2-D and 3-D analyses of palatal casts were made at two time points: before neonatal cheiloplasty at the mean age of 3 days (±1 day), and 10 months after surgery at the mean age of 10 months (±1 month)., Results: The upper dental arch of cUCLP and UCLP + b patients showed similar developmental changes, but the cleft type influenced growth significantly. The initial high shape variability in cUCLP patients diminished after 10 months, and approached the variability in UCLP + b patients. Both the width and length dimensions increased after surgery. Important growth concerned the anterior ends of both segments. The width and length dimensions illustrated similar growth trends with non-cleft controls and UCLP patients who underwent later cheiloplasty., Conclusion: Early neonatal cheiloplasty caused no reduction in the length or width dimensions during the first year of life. Our data suggest a reconstructed lip has a natural formative effect on the actively growing anterior parts of upper dental arch segments, which cause narrowing of the alveolar cleft., (Copyright © 2018 Elsevier B.V. All rights reserved.)

One of the most fundamental issues in forensic anthropology is the determination of sex and population affinity based on various skeletal elements. Therefore, we compared the sexual dimorphism of the upper facial skeleton from a recent Czech population (twenty-first century) with that of a population from Early Modern Age Bohemia (sixteenth to eighteenth centuries). Methods of geometric morphometrics were applied. According to the results, sexual dimorphism in terms of size, shape, and form was statistically significant in both populations. The best results of sex estimation originated from analyses of form. Thus, both size and shape differences should be taken into account for determination of the sex. The accuracy of prediction achieved 91.1% for individuals in the recent population and 87.5% for individuals from the early modern population. Only minor differences were found between sexual dimorphism in the studied populations. We conclude that sexual dimorphism of the upper facial skeleton is stable during the relatively short time period.

Background: A new method of early neonatal cheiloplasty has recently been employed on patients having complete unilateral cleft lip and palate (cUCLP). We aimed to investigate (1) their detailed palatal morphology before surgery and growth during the 10 months after neonatal cheiloplasty, (2) the growth of eight dimensions of the maxilla in these patients, (3) the development of these dimensions compared with published data on noncleft controls and on cUCLP patients operated using later operation protocol (LOP; 6 months of age)., Methods: Sixty-six virtual dental models of 33 longitudinally evaluated cUCLP patients were analysed using metric analysis, a dense correspondence model, and multivariate statistics. We compared the palatal surfaces before neonatal cheiloplasty (mean age, 4 days) and before palatoplasty (mean age, 10 months)., Results: The palatal form variability of 10-month-old children was considerably reduced during the observed period thanks to their undisturbed growth, that is, the palate underwent the same growth changes following neonatal cheiloplasty. A detailed colour-coded map identified the most marked growth at the anterior and posterior ends of both segments. The maxilla of cUCLP patients after neonatal cheiloplasty had a growth tendency similar to noncleft controls (unlike LOP)., Conclusions: Both methodological approaches showed that early neonatal cheiloplasty in cUCLP patients did not prevent forward growth of the upper jaw segments and did not reduce either the length or width of the maxilla during the first 10 months of life., (Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.)