Search

Recent research has demonstrated that chemotactic bacteria can disperse inside microsized pores while traveling toward favorable conditions. Microbe-microbe cotransport might enable nonmotile bacteria to be carried with motile partners to enhance their dispersion and reduce their deposition in porous systems. The aim of this study was to demonstrate the enhancement in the dispersion of nonmotile bacteria ( Mycobacterium gilvum VM552, a polycyclic aromatic hydrocarbon-degrader, and Sphingobium sp. D4, a hexachlorocyclohexane-degrader, through micrometer-sized pores near the exclusion-cell-size limit, in the presence of motile Pseudomonas putida G7 cells. For this purpose, we used bioreactors equipped with two chambers that were separated with membrane filters with 3, 5, and 12 μm pore sizes and capillary polydimethylsiloxane (PDMS) microarrays (20 μm × 35 μm × 2.2 mm). The cotransport of nonmotile bacteria occurred exclusively in the presence of a chemoattractant concentration gradient, and therefore, a directed flow of motile cells. This cotransport was more intense in the presence of larger pores (12 μm) and strong chemoeffectors (γ-aminobutyric acid). The mechanism that governed cotransport at the cell scale involved mechanical pushing and hydrodynamic interactions. Chemotaxis-mediated cotransport of bacterial degraders and its implications in pore accessibility opens new avenues for the enhancement of bacterial dispersion in porous media and the biodegradation of heterogeneously contaminated scenarios.

Plants and their associated microbiota can have a significant impact on the behaviour of soil contaminants. Particularly, root exudation is one of the most important plant-associated processes in this respect, as it may have a substantial effect on the bioavailability of soil contaminants, specially of hydrophobic contaminants strongly sorbed by soil. The aim of the present study was to evaluate the effect of root exudates (natural and artificial) on the desorption of α-, β-, δ- and γ-isomers of hexachlorocyclohexane (HCH) from contaminated soil, using batch experiments. Natural root exudates were obtained from Holcus lanatus plants growing in the same (contaminated) area. Fifteen compounds (mainly organic acids and phenolic compounds) usually found in root exudates were also tested, individually or as mixtures (1 and 10 mM). Both natural and artificial exudates favoured the mobilization of sorbed HCH in soil. The effect was highly significant for α-, β- and γ-HCH isomers, for which the desorption rates increased by 23.0, 26.8 and 15.5% in the presence of natural root exudates and by 40.1, 25.9 and 25.6% in the presence of the artificial mixture (at 10 mM). The δ-HCH desorption rates increased by less than 10%. The effect of individual exudate components was very variable, but increased with the carbon content, reflecting the significance of hydrophobic interactions between the exudates and HCH molecules in the desorption of these last from soil. These findings indicate that plants may significantly influence the bioavailability of persistent contaminants, with major implications for improving phyto- and bioremediation procedures., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Assessing the ecological risk of combined pollution, especially from a holistic perspective with the consideration of the overarching functions of soil ecosystem, is crucial and beneficial to the improvement of ecological risk assessment (ERA) framework. In this study, four soils with similar physicochemical properties but contrasting heavy metals contamination levels were selected to explore changes in the integrated functional sensitivity (MSI), resistance (MRS) and resilience (MRL) of soil microbial communities subjected to herbicide siduron, based on which the ecological risk of the accumulation of siduron in the four studied soils were evaluated. The results suggested that the microbial biomass carbon, activity of denitrification enzyme and nitrogenase were indicative of MSI and MRS, and the same three parameters plus soil basal respiration were indicative of MRL. Significant dose-effect relationships between siduron residues in soils and MSI, MRS and MRL under combined pollution were observed. Heavy metal polluted soils showed higher sensitivity and lower resistance to the additional disturbance of herbicide siduron due to the lower microbial biomass, while the resilience of heavy metal polluted soils was much higher due to the pre-adaption to the chemical stresses. The quantifiable indicator microbial functional stability was incorporated in the framework of ERA and the results showed that the accumulation of siduron in the studied soils could exhibit potential harm to the integrated functional stability of soil microbial community. Thus, this work provides insights into the application of integrated function of soil microbial community into the framework of ERA., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Bioremediation is a soil clean-up technique which exploits the metabolic capacity of microorganisms to degrade soil contaminants. A model was developed to simulate the ex situ bioremediation of a diesel-contaminated soil in a bio-slurry reactor inoculated with a diesel-degrading bacterial strain. Mass transfer processes involving desorption of diesel from soil to water and volatilization of diesel from water, and biodegradation by the bacterial inoculant were included in the model by using Weibull sigmoid kinetics and logistic/Monod kinetics respectively. Model parameters were estimated in batch-based abiotic and biodegradation experiments. Sensitivity analysis revealed the importance of maintaining a high bacterial density in the system for maximum bioremediation efficiency. The model was validated using a pilot bioreactor monitored for 528 h, which removed almost 90% of the diesel present in the system. The results revealed the capacity of the model to predict the bioremediation efficiency under different scenarios by adapting the input parameters to each system., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Pyrolysis of waste materials to produce biochar is an excellent and suitable alternative supporting a circular bio-based economy. One of the properties attributed to biochar is the capacity for sorbing organic contaminants, which is determined by its composition and physicochemical characteristics. In this study, the capacity of waste-derived biochar to retain volatile fuel organic compounds (benzene, toluene, ethylbenzene and xylene (BTEX) and fuel oxygenates (FO)) from artificially contaminated water was assessed using batch-based sorption experiments. Additionally, the sorption isotherms were established. The results showed significant differences between BTEX and FO sorption on biochar, being the most hydrophobic and non-polar contaminants those showing the highest retention. Furthermore, the sorption process reflected a multilayer behaviour and a relatively high sorption capacity of the biochar materials. Langmuir and Freundlich models were adequate to describe the experimental results and to detect general differences in the sorption behaviour of volatile fuel organic compounds. It was also observed that the feedstock material and biochar pyrolysis conditions had a significant influence in the sorption process. The highest sorption capacity was found in biochars produced at high temperature (> 400 °C) and thus rich in aromatic C, such as eucalyptus and corn cob biochars. Overall, waste-derived biochar offers a viable alternative to be used in the remediation of volatile fuel organic compounds from water due to its high sorption capacity.

Over the last 60 years, soil microbiologists have accumulated a wealth of experimental data showing that the bulk, macroscopic parameters (e.g., granulometry, pH, soil organic matter, and biomass contents) commonly used to characterize soils provide insufficient information to describe quantitatively the activity of soil microorganisms and some of its outcomes, like the emission of greenhouse gasses. Clearly, new, more appropriate macroscopic parameters are needed, which reflect better the spatial heterogeneity of soils at the microscale (i.e., the pore scale) that is commensurate with the habitat of many microorganisms. For a long time, spectroscopic and microscopic tools were lacking to quantify processes at that scale, but major technological advances over the last 15 years have made suitable equipment available to researchers. In this context, the objective of the present article is to review progress achieved to date in the significant research program that has ensued. This program can be rationalized as a sequence of steps, namely the quantification and modeling of the physical-, (bio)chemical-, and microbiological properties of soils, the integration of these different perspectives into a unified theory, its upscaling to the macroscopic scale, and, eventually, the development of new approaches to measure macroscopic soil characteristics. At this stage, significant progress has been achieved on the physical front, and to a lesser extent on the (bio)chemical one as well, both in terms of experiments and modeling. With regard to the microbial aspects, although a lot of work has been devoted to the modeling of bacterial and fungal activity in soils at the pore scale, the appropriateness of model assumptions cannot be readily assessed because of the scarcity of relevant experimental data. For significant progress to be made, it is crucial to make sure that research on the microbial components of soil systems does not keep lagging behind the work on the physical and (bio)chemical characteristics. Concerning the subsequent steps in the program, very little integration of the various disciplinary perspectives has occurred so far, and, as a result, researchers have not yet been able to tackle the scaling up to the macroscopic level. Many challenges, some of them daunting, remain on the path ahead. Fortunately, a number of these challenges may be resolved by brand new measuring equipment that will become commercially available in the very near future.

Bioremediation of polluted soils is a promising technique with low environmental impact, which uses soil organisms to degrade soil contaminants. In this study, 19 bacterial strains isolated from a diesel-contaminated soil were screened for their diesel-degrading potential, biosurfactant (BS) production, and biofilm formation abilities, all desirable characteristics when selecting strains for re-inoculation into hydrocarbon-contaminated soils. Diesel-degradation rates were determined in vitro in minimal medium with diesel as the sole carbon source. The capacity to degrade diesel range organics (DROs) of strains SPG23 (Arthobacter sp.) and PF1 (Acinetobacter oleivorans) reached 17-26% of total DROs after 10 days, and 90% for strain GK2 (Acinetobacter calcoaceticus). The amount and rate of alkane degradation decreased significantly with increasing carbon number for strains SPG23 and PF1. Strain GK2, which produced BSs and biofilms, exhibited a greater extent, and faster rate of alkane degradation compared to SPG23 and PF1. Based on the outcomes of degradation experiments, in addition to BS production, biofilm formation capacities, and previous genome characterizations, strain GK2 is a promising candidate for microbial-assisted phytoremediation of diesel-contaminated soils. These results are of particular interest to select suitable strains for bioremediation, not only presenting high diesel-degradation rates, but also other characteristics which could improve rhizosphere colonization.

Plant growth promoting (PGP) bacterial strains possess different mechanisms to improve plant development under common environmental stresses, and are therefore often used as inoculants in soil phytoremediation processes. The aims of the present work were to study the effects of a collection of plant growth promoting bacterial strains on plant development, antioxidant enzyme activities and nutritional status of Cytisus striatus and/or Lupinus luteus plants a) growing in perlite under non-stress conditions and b) growing in diesel-contaminated soil. For this, two greenhouse experiments were designed. Firstly, C. striatus and L. luteus plants were grown from seeds in perlite, and periodically inoculated with 6 PGP strains, either individually or in pairs. Secondly, L. luteus seedlings were grown in soil samples of the A and B horizons of a Cambisol contaminated with 1.25% (w/w) of diesel and inoculated with best PGP inoculant selected from the first experiment. The results indicated that the PGP strains tested in perlite significantly improved plant growth. Combination treatments provoked better growth of L. luteus than the respective individual strains, while individual inoculation treatments were more effective for C. striatus. L. luteus growth in diesel-contaminated soil was significantly improved in the presence of PGP strains, presenting a 2-fold or higher increase in plant biomass. Inoculants did not provoke significant changes in plant nutritional status, with the exception of a subset of siderophore-producing and P-solubilising bacterial strains that resulted in significantly modification of Fe or P concentrations in leaf tissues. Inoculants did not cause significant changes in enzyme activities in perlite experiments, however they significantly reduced oxidative stress in contaminated soils suggesting an improvement in plant tolerance to diesel. Some strains were applied to non-host plants, indicating a non-specific performance of their plant growth promotion. The use of PGP strains in phytoremediation may help plants to overcome contaminant and other soil stresses, increasing phytoremediation efficiency., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Soil and groundwater contamination around a fuel distribution station in Tomiño (NW Spain) was evaluated. For this purpose, top and subsoil (up to 6.4 m) and groundwater were sampled around the station, approximately in a 60-m radius. Samples were analysed by HS-SPME-GC-MS to identify and quantify volatile fuel organic compounds (VFOC) (MTBE, ETBE and BTEX) and diesel range organics (DRO). Analysis and fingerprinting data suggested that the contamination of soil and groundwater was provoked by a fuel leak from underground storage tanks. This was reflected by hydrocarbon indices and principal component analysis, which discriminated a direct source of contamination of the subsoil samples around the station. The contaminants probably migrated from tank nearby soils to surrounding soils and leached to groundwater, following a SW direction. Irrigation with contaminated groundwater provoked a severe contamination of topsoils, which were enriched with the lightest components of gasoline and diesel. Fingerprinting also revealed the continuity of the leak, reflected by the presence of volatiles in some samples, which principally appeared in fresh leaks. MTBE was detected in a very high concentration in groundwater samples (up to 690 μg L(-1)), but it was not detected in fresh gasoline. This also evidenced an old source of contamination, probably starting in the mid-1990s, when the use of MTBE in gasoline was regulated.

The association of plants and rhizospheric bacteria provides a successful strategy to clean up contaminated soils. The purpose of this work was to enhance diesel degradation in rhizosphere by inoculation with selected bacterial strains: a diesel degrader (D), plant growth-promoting (PGP) strains, or a combination (D+PGP). Plants were set up in pots with the A or B horizon of an umbric Cambisol (A and B) spiked with diesel (1.25%, w/w). After 1 mo, the dissipation of diesel range organics (DRO) with respect to = 0 (i.e., 1 wk after preparing the pots with the seedlings) concentration was significantly higher in inoculated than in noninoculated (NI) pots: The highest DRO losses were found in A D+PGP pots (close to 15-20% higher than NI) and in B D pots (close to 10% higher). The water-extractable DRO fraction was significantly higher at = 30 d (15-25%) compared with = 0 (<5%), probably due to the effects of plant root exudates and biosurfactants produced by the degrader strain. The results of this experiment reflect the importance of the partnerships between plants and bacterial inoculants and demonstrate the relevance of the effect of bacterial biosurfactants and plant root exudates on contaminant bioavailability, a key factor for enhancing diesel rhizodegradation. The association of lupine with D and PGP strains resulted in a promising combination for application in the rhizoremediation of soils with moderate diesel contamination., (Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.)

Volatile fuel compounds such as fuel oxygenates (FO) (MTBE and ETBE) and BTEX (benzene, toluene, ethylbenzene and xylene) are some of the most soluble components of fuel. Characterizing the leaching potential of these compounds is essential for predicting their mobility through the soil profile and assessing the risk of groundwater contamination. Plant root exudates can play an important role in the modification of contaminant mobility in soil-plant systems, and such effects should also be considered in leaching studies. Artificially spiked samples of A and B horizons from an alumi-umbric Cambisol were leached in packed-columns and batch experiments using Milli-Q water and plant root exudates as leaching agents. The leaching potential and rate were strongly influenced by soil-contaminant interactions and by the presence of root exudates. Organic matter in A horizon preferably sorbed the most non-polar contaminants, lowering their leaching potential, and this effect was enhanced by the presence of root exudates. On the other hand, the inorganic components of the B horizon, showed a greater affinity for polar molecules, and the presence of root exudates enhanced the desorption of the contaminants. Column experiments resulted in a more realistic protocol than batch tests for predicting the leaching potential of volatile organic compounds in dissimilar soils., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Vegetation and its associated microorganisms play an important role in the behaviour of soil contaminants. One of the most important elements is root exudation, since it can affect the mobility, and therefore, the bioavailability of soil contaminants. In this study, we evaluated the influence of root exudates on the mobility of fuel derived compounds in contaminated soils. Samples of humic acid, montmorillonite, and an A horizon from an alumi-umbric Cambisol were contaminated with volatile contaminants present in fuel: oxygenates (MTBE and ETBE) and monoaromatic compounds (benzene, toluene, ethylbenzene and xylene). Natural root exudates obtained from Holcus lanatus and Cytisus striatus and ten artificial exudates (components frequently found in natural exudates) were added to the samples, individually and as a mixture, to evaluate their effects on contaminant mobility. Fuel compounds were analyzed by headspace-gas chromatography-mass spectrometry. In general, the addition of natural and artificial exudates increased the mobility of all contaminants in humic acid. In A horizon and montmorillonite, natural or artificial exudates (as a mixture) decreased the contaminant mobility. However, artificial exudates individually had different effects: carboxylic components increased and phenolic components decreased the contaminant mobility. These results established a base for developing and improving phytoremediation processes of fuel-contaminated soils.