Search

The ecological and economic benefits of mycelium composites offer a promising opportunity for supporting sustainable development in Africa. This study focuses on assessing the environmental impact of mycelium composites for building and construction (MCBs) by conducting a life cycle assessment (LCA) in the context of Africa. It is demonstrated that the potential environmental impact of MCBs is substantially influenced by the use and source of electrical power for autoclaves, incubators, and ovens, making the culturing and post-processing phases the major environmental hotspots. The impact of MCB production is also relative to the energy mix of specific countries, being higher in countries that rely on fossil fuel energy (e.g., South Africa) and lower in those that rely more on renewable sources (e.g., Democratic Republic of the Congo, DRC). Furthermore, the impact of MCB production is found to be sensitive to travel distance, suggesting that situating production facilities closer to agricultural, agro-industrial, and/or forestry waste sources could be more beneficial than interregional sourcing, for example. It is also demonstrated that MCBs have the potential to be a more ecologically sustainable alternative to some conventional construction materials (e.g., concrete) over an entire life cycle. Based on the insights obtained from this LCA, some recommendations have been proposed to address potential environmental repercussions pre-emptively and proactively: this is particularly important for nations, mainly in the Global South, that exhibit low resilience to climate change due to limited economic resources. Furthermore, with the rapid expansion of mycelium composite technology, there is a need to increase awareness about its potential environmental impact and, ultimately, to mitigate its potential contribution to pressing environmental concerns (e.g., global warming and climate change). Consequently, this study also adds to the existing body of literature on LCA studies, delineating key factors for consideration in future LCA studies and providing guidance for the sustainable establishment and expansion of this technology., (© 2024. The Author(s).)

Hazardous chemicals in building and construction plastics can lead to health risks due to indoor exposure and may contaminate recycled materials. We systematically sampled new polyvinyl chloride floorings on the Swiss market ( n = 151). We performed elemental analysis by X-ray fluorescence, targeted and suspect gas chromatography-mass spectrometry analysis of ortho -phthalates and alternative plasticizers, and bioassay tests for cytotoxicity and oxidative stress, and endocrine, mutagenic, and genotoxic activities (for selected samples). Surprisingly, 16% of the samples contained regulated chemicals above 0.1 wt %, mainly lead and bis(2-ethylhexyl) phthalate (DEHP). Their presence is likely related to the use of recycled PVC in new flooring, highlighting that uncontrolled recycling can delay the phase-out of hazardous chemicals. Besides DEHP, 29% of the samples contained other ortho -phthalates (mainly diisononyl and diisodecyl phthalates, DiNP and DiDP) above 0.1 wt %, and 17% of the samples indicated a potential to cause biological effects. Considering some overlap between these groups, they together make up an additional 35% of the samples of potential concern. Moreover, both suspect screening and bioassay results indicate the presence of additional potentially hazardous substances. Overall, our study highlights the urgent need to accelerate the phase-out of hazardous substances, increase the transparency of chemical compositions in plastics to protect human and ecosystem health, and enable the transition to a safe and sustainable circular economy.

Background: Work-related musculoskeletal disorders (WMSDs) located in the low back and neck/shoulder regions are major concerns for both workers, workplaces, and society. Masons are prone to WMSD, because their work is characterized by repetitive work and high physical workload. However, the knowledge on the physical workload during bricklaying is primarily based on subjective measurements., Objective: This cross-sectional field study with technical measurements aimed to quantify physical workload in terms of muscular activity and degree of forward bending during bricklaying at different working heights among masons, i.e., knee, hip, shoulder, and above shoulder height., Methods: Twelve male (36.1±16.1 years) experienced masons participated in a cross-sectional field study with technical measurements. Surface electromyography from erector spinae longissimus and upper trapezius muscles and an inertial measurement unit-sensor placed on the upper back were used to assess the physical workload (level of muscle activation and degree of forward bending) different bricklaying heights. Manual video analysis was used to determine duration of work tasks, frequency, type, and working height. The working heights were categorized as 'knee', 'hip', 'shoulder', and 'above shoulder'. The 95 percentiles of the normalized Root Mean Square (RMSn) values were extracted assess from erector spinae and trapezius recordings to assess strenuous level muscle of muscle activation., Results: The RMSn of dominant erector spinae muscle increased from hip- to shoulder height (from 26.6 to 29.6, P < 0.0001), but not from hip to above shoulder height and decreased from hip to knee height (from 26.6 to 18.9, P < 0.0001). For the dominant trapezius muscle, the RMSn increased from hip- to shoulder- and above shoulder height (from 13.9 to 19.7 and 24.0, respectively, P < 0.0001) but decreased from hip- to knee height (from 13.9 to 11.5, P < 0.0001). Compared to hip height (27.9°), an increased forward bending was detected during bricklaying at knee height (34.5°, P < 0.0001) and a decreased degree of forward bending at shoulder- and above shoulder height (17.6° and 12.5°, P < 0.0001, respectively)., Conclusion: Based on technical measurements, bricklaying at hip height showed the best compromise between muscular load and degree of forward bending. This study contributes to the development of the work environment for masons and can help guide preventive initiatives to reduce physical workload.

In this article, we survey various non-contact, non-destructive testing methods by way of terahertz (THz) spectroscopy and imaging designed for use in various industrial sectors. A brief overview of the working principles of THz spectroscopy and imaging is provided, followed by a survey of selected applications from three industries-the building and construction industry, the energy and power industry, and the manufacturing industry. Material characterization, thickness measurement, and defect/corrosion assessment are demonstrated through the examples presented. The article concludes with a discussion of novel spectroscopy and imaging devices and techniques that are expected to accelerate industry adoption of THz systems.