Search

In this work, chloride ions were used as conservative tracers and supplemented with conservative amounts of chloroethenes (PCE, TCE, Cis-DCE, 1,1-DCE), chloroethanes (1,1,1-TCA, 1,1-DCA), and the carbon isotope ratios of certain compounds, the most representative on the sites studied, which is a novelty compared to the optimization methods developed in the scientific literature so far. A location of the potential missing sources is then proposed in view of the balances of the calculated mixing fractions. A test of the influence of measurement errors on the results shows that the uncertainties in the calculation of the mixture fractions are less than 11%, indicating that the source identification method developed is a robust tool for identifying sources of chlorinated solvents in groundwater., (© 2023. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

In this paper, the behavior of foam in a porous medium is studied in order to understand the effect of the fluid velocity on foam properties. This aspect is crucial during foam injection, as due to radial effects the foam velocity largely decreases around the injection well. The foam properties are detailed through the use of a new local equilibrium foam model parameter estimation approach using an improved new shear function and based on the most widely used STARS model developed by the Computer Modeling Group (CMG). A new mode of calculation of the STARS model parameters is then presented in order to allow both a semiautomated fitting of several quality scan pressure curves and a consideration of the role of the total velocity. The approach is tested through column experiments done at various velocities and gas fractions. Furthermore, the proposed model is also tested on literature results in order to validate it for very different experimental conditions. This study and the fitted results are then used to understand, on both our column experiments and the literature data, the existence of two shear effects and their origins., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

Polluted sites are ubiquitous worldwide but how plant partition their biomass between different organs in this context is unclear. Here, we identified three possible drivers of biomass partitioning in our controlled study along pollution gradients: plant size reduction (pollution effect) combined with allometric scaling between organs; early deficit in root surfaces (pollution effect) inducing a decreased water uptake; increased biomass allocation to roots to compensate for lower soil resource acquisition consistent with the optimal partitioning theory (plant response). A complementary meta-analysis showed variation in biomass partitioning across published studies, with grass and woody species having distinct modifications of their root: shoot ratio. However, the modelling of biomass partitioning drivers showed that single harvest experiments performed in previous studies prevent identifying the main drivers at stake. The proposed distinction between pollution effects and plant response will help to improve our knowledge of plant allocation strategies in the context of pollution., (© 2022. The Author(s).)

Since the fifties, organochlorine pesticides (OCPs) had been used in agriculture to protect vegetables. Two decades after their ban by the Stockholm convention in 2001, OCPs are still present in agricultural soils inducing vegetable contamination with concentrations above Maximum Residue Level (MRL). This is a major concern for a 5 km 2 peri-urban vegetable growing valley located in the south west of France. In the present work, the sampling method was developed to clarify the spatial distribution of one OCP, Dieldrin, and its relationship with soil properties at the scale of study area. A total of 99 soil samples was collected for physicochemical analyses and Dieldrin concentrations. Results show Dieldrin concentrations in soils up to 204 μg kg -1 . The horizontal distribution of this pesticide is heterogeneous at the study area scale but homogeneous in each reference plot studied. About 85% of the contamination was located in the top soil layers (0-40 cm depth), but Dieldrin may still be quantified at a depth of 80 cm. Among all soil physicochemical parameters analysed, SOM was the most significantly related (P < 10 -4 ) with Dieldrin concentrations, once different grain size fractions were considered. Moreover, results indicate a 33 times higher Dieldrin concentration and/or extractability for coarse sand than for other grain size fractions. These results show that the developed sampling method is adapted for the study area scale as it helps understanding the factors influencing the spatial distribution of Dieldrin. Historical amendments are the predominant factor for the horizontal contamination and deep ploughing for the vertical contamination. Also, the variations of coarse sand repartition in soils prevents identification of relationships between SOM and Dieldrin contamination in bulk soil. Further investigation is required to explain these relationships but these results highlight why no clear relationship between OCPs and SOM was previously identified., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Analytical and numerical models describing the evolution of contaminant concentrations in the plume associated with the dissolution of NAPL source and degradation processes were presented in the literature. At real sites and particularly in complex aquifers like chalk, it is difficult to understand how the sources of contaminants evolve with time. 1,1,1-Trichloroethane (1,1,1-TCA) is one of the few compounds with a well-known hydrolysis constant, that can help to improve knowledge of the contaminant sources and transport rates of dissolved contaminants in groundwater by dating the spill. In this work, different scenarios that could explain the evolution of the concentrations of 1,1,1-TCA and its degradation product 1,1-Dichloroethene (1,1-DCE) at a real contaminated site were investigated by analytical and numerical modelling. The results show that (1) the peaks of concentration time series do not correspond to a single contamination event even in the case of a complex medium, (2) the multiphasic behavior of the concentration time series is dictated by the dissolution in a heterogeneous medium, and (3) the persistence of the concentrations can arise from a small residual organic phase or transport in dual domain medium., (Copyright © 2021. Published by Elsevier B.V.)

Soils and groundwater are often contaminated by complex organic mixtures also called Non Aqueous Phase Liquids (NAPLs). Several techniques such as drilling, monitoring of soil gas or injection of tracers are traditionally used to quantify NAPLs in aquifers but are complex to perform. The use of natural soil gas such as 222 Rn could be an easy and cheap alternative. This method requires the knowledge of the radon NAPL-water partitioning coefficients (K n-w .). Once spilled on soil, NAPL will undergo degradation (evaporation, effects of sun light among others) and this degradation could impact the K n-w . This study aims at investigating the partitioning coefficients of complex NAPLs such as commercial diesel fuel and gasoline in relation to degradation such as evaporation and UV-degradation. For that purpose, batch experiments and GCMS investigations were carried out. The results show different K n-w for the commercial diesel fuel (60.7 ± 6.1) and gasoline (37.4 ± 5.6). The results also show different K n-w behaviors in relation with degradation. Degraded diesel fuel display opposite K n-w values (74.8 ± 7.5 and 25.1 ± 2.5 for UV degraded and evaporated diesel fuel, respectively), compared to fresh one. Degraded gasoline shows no significant variations of the K n-w compared to fresh one. The molecular investigation reveals the removal of the most volatile fraction for the evaporation treatment, whereas UV-degradation do not have pronounced effects on the chromatogram pattern. For the gasoline molecular investigation, no difference is observed between the treatments excepted a very slight removal of the lightest compounds under evaporation. These results show that NAPL degradation have effects on the K n-w for diesel fuel and no significant effects for gasoline, at least with these degradation paths. This K n-w variation will have in fine effects on 222 Rn activity interpretation and NAPL subsurface quantification., Competing Interests: Declaration of competing interest The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Fluoride-bearing apatite minerals such as fluorapatite (FAP: Ca 10 (PO 4 ) 6 F 2 ) and related carbonate-rich fluorapatites (CFA: Ca 10 (PO 4 ) 5 (CO 3 ,F)F 2 ), which occur ubiquitously as trace components of rocks and sediments, may act as sources for geogenic groundwater fluoride contamination. CFA dissolution often occurs in conjunction with declining dissolved calcium concentrations. Therefore, managed aquifer recharge (MAR) operations using deionised or low calcium source water are at risk of disturbing the naturally persisting geochemical equilibrium between CFA and the ambient groundwater and induce fluoride mobilisation. In this study, we employ reactive transport modelling to investigate how an engineered manipulation of the MAR source water composition might mitigate such groundwater fluoride contamination. Based on a previously developed and calibrated model for Australia's largest groundwater replenishment operation, we investigate the efficiency of (i) raising aqueous calcium concentration through the addition of CaCl 2 or Ca(OH) 2 amendment, (ii) raising aqueous sodium concentrations through the addition of NaCl or sea salt amendment and (iii) raising the pH. The modelling results illustrate in detail how the geochemical zonation around injection boreholes evolves over time and how this affects fluoride release and attenuation for the different amendment types. Treatments involving the addition of calcium and sodium in the source water are both found to be effective at reducing maximum groundwater fluoride concentrations during MAR, with calcium generally producing the greatest reduction in maximum fluoride concentrations. In contrast, increasing the injectate pH was found to be inefficient in reducing fluoride concentrations significantly due to the strong pH buffering effect of the aquifer sediments., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021. Published by Elsevier Ltd.)

Foam can be used to achieve environmental remediation in case of contamination caused by light non aqueous phase spills. However, when it comes in contact with oily pollutants, foam becomes weaker and its life time is greatly reduced. Such weakening can be dampened by using silica particles -together with saponin surfactant- which were shown to reinforce foam in bulk and 1D sandpack experiments. Here is addressed both foam propagation in a 2D porous media when buoyancy and gravity interfere, and foam behaviour when in contact with floating oil. Therefore, macroscopic foam displacement, and specific liquid and gas phases behaviours were studied in a 2D-tank. A piston-like displacement was observed during foam propagation in the absence of oil, while foam liquid phase was influenced by gravity and did not propagate homogeneously on entire tank height. In the presence of oil, foam was partly destroyed, which increased the local permeability of gas and created new preferential paths for gas flow. This effect was partially avoided via a surfactant concentration increase, but solid colloidal particles turned out to be a more efficient stabilizing agent, by significantly increasing foam strength and its oil-tolerance., (Copyright © 2021 Elsevier B.V. All rights reserved.)

In water-scarce areas, the reclamation of wastewater through advanced water treatment and subsequent reinjection into depleted aquifers is an increasingly attractive water management option. However, such injection can trigger a range of water-sediment interactions which need to be well understood and quantified to ensure sustainable operations. In this study, reactive transport modeling was used to analyze and quantify the interacting hydrogeochemical processes controlling the mobilization of fluoride and phosphate during injection of highly treated recycled water into a siliciclastic aquifer. The reactive transport model explained the field-observed fluoride and phosphate transport behavior as a result of the incongruent dissolution of carbonate-rich fluorapatite where (i) a rapid proton exchange reaction primarily released fluoride and calcium, and (ii) equilibrium with a mineral-water interface layer of hydrated dibasic calcium phosphate released phosphate. The modeling results illustrated that net exchange of calcium on cation exchange sites in the sediments postbreakthrough of the injectant was responsible for incongruent mineral dissolution and the associated fluoride and phosphate release. Accordingly, amending calcium chloride into the injectant could potentially reduce fluoride and phosphate mobilization at the study site. Insights from this study are broadly applicable to understanding and preventing geogenic fluoride mobilization from fluoride-bearing apatite minerals in many other aquifers worldwide.

Foams can be used to remediate aquifer pollution due to industrial leaks. However, when in contact with oily pollutants, foams may collapse and thus have a very limited life-time. A suitable formulation of biodegradable foam that resists oil contact is therefore needed. Hence, the ability of xanthan polymer and silica colloidal particles to stabilise foam against oil was investigated. Their performance in terms of stabilisation was evaluated via foam generation experiments in columns of porous medium, conducted with and without oil. The results show that the addition of xanthan polymer led to an increase in the viscosity of the solution, which thwarted the formation of foam. It did not improve the resistance of foam to oil, but increased altogether the resistance factor up to more than twice the original value. Concerning silica particles, it was demonstrated that they both noticeably increased resistance factor and moderately stabilised foam against oil by 20% at optimum concentration. As such, this study presents a new way to reinforce foam against oil for soil remediation issues., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The potential of LNAPL delineation by 222 Rn soil-gas monitoring in a chemically heterogeneous vadose zone was investigated in this study based on laboratory (batch and columns) experiments and numerical modelling. An enhanced version of the MIN3P reactive transport code was used to simulate Rn transport in both uncontaminated and NAPL-contaminated vadose zones and results were validated against analytical solutions and laboratory experiments. Results show that 222 Rn activity profiles are mainly controlled by porous media 222 Rn production, vadose zone fluid saturations and especially the type and distribution of NAPL in contaminated areas. The results also show that decreases in 222 Rn activity and variations in activity gradients provide evidence for the presence and saturation of NAPL. This study demonstrates that LNAPL delineation via 222 Rn gas surveys at contaminated sites works best, if gas measurements extend as deep as possible and include regions where 222 Rn activity decreases due to elevated NAPL content. In addition, collection and analysis of depth-discrete gas samples allows the characterization of vertical NAPL distribution based on the 222 Rn activity gradient. The determination of 222 Rn production in the unsaturated zone, as well as water capillary pressure curves are of key importance in enabling the discrimination of an uncontaminated from a NAPL-contaminated area., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Development of organisms that live on contaminated soils depends on toxicity as well as several physical and chemical soil properties. We aimed to identify plant bioassays most responsive to contaminants and not to confounding factors due to soil type differences. We implemented a multi-site approach in seven contaminated sites and used different ordinary plant bioassays (fourteen-day-shoot biomass and five-day-root and shoot elongation). Most of the sites were contaminated with polycyclic aromatic hydrocarbons (PAHs), and soils were sampled from areas of both high and low contamination. Bioassays were performed on ninety soil samples and were carried out with six model species. We performed analyses of regulatory PAHs and their derivatives content in the samples. Fourteen-day-shoot biomass responses depended on the site's origin, with an intricate response of plants that faced contrasted soil pH and organic matter content and various contaminant levels. Five-day-shoot and root lengths were informative when considering the most heavily PAH-contaminated site, since both measures exhibited a close dose-dependent response to PAHs but not to soil pH or organic matter content. For the other sites, elongation tests revealed tenuous effects somehow related to the presence of PAHs or their derivatives. We propose that tests based on plant development during their autotrophic phase (the fourteen-day-shoot biomass test in this study) are likely more sensitive to environmental stressors but less specific for contaminant-induced effects. Comparatively, tests based on early and heterotrophic plant development could be particularly more specific for soil contaminants, but the associated responses may be of low sensitivity., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

A novel approach using foam to manage hazardous waste was successfully demonstrated under active site conditions. The purpose of the foam was to divert groundwater flow, that would normally enter the source zone area, to reduce dissolved contaminant release to the aquifer. During the demonstration, foam was pre generated and directly injected surrounding the chlorinated solvent source zone. Despite the constraints related to the industrial activities and non-optimal position of the injection points, the applicability and effectiveness of the approach have been highlighted using multiple metrics. A combination of measurements and modelling allowed definition of the foam extent surrounding each injection point, and this appears to be the critical metric to define the success of the foam injection approach. Information on the transport of chlorinated solvents in groundwater showed a decrease of contaminant flux by a factor of 4.4 downstream of the confined area. The effective permeability reduction was maintained over a period of three months. The successful containment provides evidence for consideration of the use of foam to improve traditional flushing techniques, by increasing the targeting of contaminants by remedial agents., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Source delineation of hydrocarbon contaminated sites is of high importance for remediation work. However, traditional methods like soil core extraction and analysis or recent Membrane Interface Probe methods are time consuming and costly. Therefore, the development of an in situ method based on soil gas analysis can be interesting. This includes the direct measurement of volatile organic compounds (VOCs) in soil gas taken from gas probes using a PID (Photo Ionization Detector) and the analysis of other soil gases related to VOC degradation distribution (CH4, O2, CO2) or related to presence of Light Non-Aqueous Phase Liquid (LNAPL) as (222)Rn. However, in widespread heterogeneous formations, delineation by gas measurements becomes more challenging. The objective of this study is twofold: (i) to analyse the potential of several in situ gas measurement techniques in comparison to soil coring for LNAPL source delineation at a heterogeneous contaminated site where the techniques might be limited by a low diffusion potential linked to the presence of fine sands and silts, and (ii) to analyse the effect of vertical sediment heterogeneities on the performance of these gas measurement methods. Thus, five types of gases were analysed: VOCs, their three related degradation products O2, CO2 and CH4 and (222)Rn. Gas measurements were compared to independent LNAPL analysis by coring. This work was conducted at an old industrial site frequently contaminated by a Diesel-Fuel mixture located in a heterogeneous fine-grained aquifer. Results show that in such heterogeneous media migration of reactive gases like VOCs occurs only across small distances and the VOC concentrations sampled with gas probes are mainly related to local conditions rather than the presence of LNAPL below the gas probe. (222)Rn is not well correlated with LNAPL because of sediment heterogeneity. Oxygen, CO2, and especially CH4, have larger lengths of diffusion and give the clearest picture for LNAPL presence at this site even when the gas probe is somewhat distant., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Spills of chloroethenes (CEs) at industrial and urban sites can create groundwater plumes in which tetrachloro- and trichloroethene sequentially degrade to dichloroethenes, vinyl chloride (VC) and ethene, or ethane under reducing conditions. For detoxification, degradation must go beyond VC. Assessments based on ethene and ethane, however, are difficult because these products are volatile, may stem from alternative sources, can be further transformed and are not always monitored. To alternatively quantify degradation beyond VC, stable carbon isotope mass balances have been proposed where concentration-weighted CE isotope ratios are summed up and compared to the original source isotope ratio. Reported assessments, however, have provided not satisfactorily quantified results entailing greatly differing upper and lower estimates. This work proposes an integrative approach to better constrain the extent of total chloroethene degradation in groundwater samples. It is based on fitting of measured concentration and compound-specific stable carbon isotope data to an analytical reactive transport equation simulating steady-state plumes in two dimensions using an EXCEL spreadsheet. The fitting also yields estimates of degradation rates, of source width and of dispersivities. The approach is validated using two synthetic benchmark cases where the true extent of degradation is well known, and using data from two real field cases from literature., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Ethyl tert-butyl ether (ETBE) was detected at high concentration (300mgL(-1)) in the groundwater below a gas-station. No significant carbon neither hydrogen isotopic fractionation of ETBE was detected along the plume. ETBE and BTEX biodegradation capacities of the indigenous microflora Pz1-ETBE and of a culture (MC-IFP) composed of Rhodococcus wratislaviensis IFP 2016, Rhodococcus aetherivorans IFP 2017 and Aquincola tertiaricarbonis IFP 2003 showed that ETBE and BTEX degradation rates were in the same range (ETBE: 0.91 and 0.83 mg L(-1)h(-1) and BTEX: 0.64 and 0.82 mg L(-1)h(-1), respectively) but tert-butanol (TBA) accumulated transiently at a high level using Pz1-ETBE (74 mg L(-1)). An on-site pilot plant (2m(3)) filled with polluted groundwater and inoculated by MC-IFP, successfully degraded four successive additions of ETBE and gasoline. However, an insignificant ETBE isotopic fractionation was also accompanying this decrease which suggested the involvement of low fractionating-strains using EthB enzymes, but required of additional proofs. The ethB gene encoding a cytochrome P450 involved in ETBE biodegradation (present in R. aetherivorans IFP 2017) was monitored by quantitative real-time polymerase chain reaction (q-PCR) on DNA extracted from water sampled in the pilot plant which yield up to 5×10(6) copies of ethB gene per L(-1)., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Volatilization of toxic organic contaminants from groundwater to the soil surface is often considered an important pathway in risk analysis. Most of the risk models use simplified linear solutions that may overpredict the volatile flux. Although complex numerical models have been developed, their use is restricted to experienced users and for sites where field data are known in great detail. We present here a novel semianalytical model running on a spreadsheet that simulates the volatilization flux and vertical concentration profile in a soil based on the Van Genuchten functions. These widely used functions describe precisely the gas and water saturations and movement in the capillary fringe. The analytical model shows a good accuracy over several orders of magnitude when compared to a numerical model and laboratory data. The effect of barometric pumping is also included in the semianalytical formulation, although the model predicts that barometric pumping is often negligible. A sensitivity study predicts significant fluxes in sandy vadose zones and much smaller fluxes in other soils. Fluxes are linked to the dimensionless Henry's law constant H for H < 0.2 and increase by approximately 20% when temperature increases from 5 to 25 degrees C.