Search

The present study developed a DNA biosensor to determine pemigatinib for the first time. Three-dimensional carnation flower-like Eu 3+ :β-MnO 2 nanostructures (3D CF-L Eu 3+ :β-MnO 2 NSs) and a screen-printed electrode (SPE) modified with polyaniline (PA) were employed. The double-stranded DNA was also immobilized completely on the PA/3D CF-L Eu 3+ :β-MnO 2 NSs/SPE. Then, electrochemical techniques were used for characterizing the modified electrode. After that, the interaction between pemigatinib and DNA was shown by a reduction in the oxidation current of guanine using differential pulse voltammetry (DPV). According to the analysis, the dynamic range of pemigatinib was between 0.001 and 180.0 μM, indicating the new electrode has a low limit of detection (LOD = 0.23 nM) for pemigatinib. Afterwards, pemigatinib in real samples was measured using the PA/3D CF-L Eu 3+ :β-MnO 2 NSs/SPE loaded with ds-DNA. The proposed DNA biosensor showed good selectivity toward pemigatinib in the presence of other interference analytes, such as other ions, structurally related pharmaceuticals, and plasma proteins. In addition, the interaction site of pemigatinib with DNA was predicted by molecular docking, which showed the interaction of pemigatinib with the guanine bases of DNA through a groove binding mode. Finally, we employed the t -test to verify the capability of the ds-DNA/PA/3D CF-L Eu 3+ :β-MnO 2 NSs/SPE for analyzing pemigatinib in real samples.

Novel Ta- MOF was synthesized under mild conditions by ultrasound irradiations. The sample was characterized by SEM, FTIR, XRD, XPS, TG and BET technique. The final structures showed high physicho-chemical properties including narrow particle size distribution, homogenous morphology, high thermal stability and remarkable surface area. Ta- MOF synthesized in this study was used as a catalyst in the synthesis of 1,4-dihydropyran derivatives. The results proved that it has a high catalyst capability. Its advantages include high recyclability, less reaction time with higher efficiency and synthesis of new1,4-dihydropyran derivatives. In the following, antimicrobial activity including antifungal and antibacterial activity of Ta- MOF nanoparticles based on Minimum Inhibitory Concentration, Minimum Fungicidal Concentration and Minimum Bactericidal Concentration were evaluated. The synthesized Ta- MOF, in addition to high catalytic properties, showed high antimicrobial activity with MIC value between 16 and -256 μg/ml, and can be introduced as an agent against bacteria and fungi., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Ahmad, Jasim, Yasin, Al-Qargholi and Hammid.)

In this study, we investigated the process of preconcentrate and determine trace amounts of Auramine O (AO) and methylene blue (MB) dyes in environmental water samples. For this purpose, the ultrasound-assisted dispersive-magnetic nanocomposites-solid-phase microextraction (UA-DMNSPME) method was performed to extract AO and MB from aqueous samples by applying magnesium oxide nanoparticles (MgO-NPs). The proposed technique is low-cost, facile, fast, and compatible with many existing instrumental methods. Parameters affecting the extraction of AO and MB were optimized using response surface methodology (RSM). Short extraction time, low experimental tests, low consumption of organic solvent, low limits of detection (LOD), and high preconcentration factor (PF) was the advantages of method. The PF was 44.5, and LOD for AO and MB was 0.33 ng mL -1 and 1.66 ng mL -1 , respectively. The linear range of this method for AO and MB were 1-1000 ng mL -1 and 5-2000 ng mL -1 , respectively. In addition, the relative standard deviation (RSD; n = 5) of the mentioned analytes was between 2.9% and 3.1%. The adsorption-desorption studies showed that the efficiency of adsorbent extraction had not declined significantly up to 6 recycling runs, and the adsorbent could be used several times. The interference studies revealed that the presence of different ions did not interfere substantially with the extraction and determination of AO and MB. Therefore, UA-DMNSPME-UV/Vis method can be proposed as an efficient method for preconcentration and extraction of AO and MB from water and wastewater samples., (© 2022. The Author(s).)

Metal organic frameworks (MOFs) are a promising choice for antibacterial and antifungal activity due to their composition, unique architecture, and larger surface area. Herein, the ultrasonic method was used to synthesize the Cu/Zn-MOF material as an effective hybrid nanostructure with ideal properties. SEM images were used to investigate the product's morphology and particle size distribution. The XRD pattern revealed that the Cu/Zn hybrid MOF nanostructures had a smaller crystalline size distribution than pure Cu and Zn-MOF samples. Furthermore, the BET technique determined that the hybrid MOF nanostructures had a high specific surface area. TG analysis revealed that the hybrid MOF structures were more thermally stable than pure samples. The final product, with remarkable properties, was used as a new option in the field of antibacterial studies. Antibacterial activity was assessed using MIC and MBC against Gram negative and Gram positive strains, as well as antifungal activity using MIC and MFC. The antimicrobial properties of the synthesized Cu/Zn hybrid MOF nanostructures revealed that they were more effective than commercial drugs in some cases. This study's protocol could be a new strategy for introducing new hybrid nanostructures with specific applications., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Abdieva, Patra, Al-Qargholi, Shahryari, Chauhan and Moghaddam-manesh.)