Search

Chronic respiratory symptoms are a health concern in the paper industry. This study evaluates the association between personal inhalable paper dust exposure and chronic respiratory symptoms among workers in this industry. In total, 270 workers from the paper industry and 267 from a water bottling factory participated. Chronic respiratory symptoms were assessed using a standardized questionnaire, modified from the American Thoracic Society. A job exposure matrix, based on cross-sectional personal measurements of inhalable paper dust, was used to estimate the exposure-response relationship between cumulative dust exposure and chronic respiratory symptoms. There was a higher prevalence of chronic coughs (27.4% vs. 7.5%), breathlessness (25.6% vs. 11%), coughs with sputum (21.1% vs. 1.1%), and wheezing (25.6% vs. 5%) among paper workers compared to those in the water bottling industry. A Poisson regression analysis revealed that the prevalence ratios for chronic coughs (APR = 3.3 and 95% CI: 2.0-5.4), breathlessness (APR = 2.2 and 95% CI: 1.4-3.4), and wheezing (APR = 4.3 and 95% CI: 2.3-7.7) were significantly higher in paper workers than in water bottling workers. Among paper workers, a significant exposure-response relationship was observed between cumulative dust exposure and chronic coughs after adjusting for age, sex, history of respiratory illnesses, work in other dusty industries, and use of biofuels. As there were only four ever-smokers, smoking was not included in the regression analysis. The results show a significant association between dust exposure and coughing, highlighting the need for control measures to prevent the development of respiratory symptoms among workers.

Background: Total paper dust exposure has been associated with respiratory problems among workers in the soft tissue paper industry. However, a comprehensive job exposure matrix (JEM) has not been developed for application to this industry. Our study was intended to address this need and to support further studies of mortality and morbidity in a cohort of Swedish workers from this industry., Methods: We evaluated four participating soft tissue paper mills in Sweden. We combined information on process and equipment status from the mills with knowledge of the mills obtained through research efforts and paper dust measurements made at all four mills to develop a semi-quantitative JEM with seven dust exposure levels. The JEM was targeted at workers enrolled into a soft tissue paper mill cohort and working any time between 1960 and 2009., Results: The JEM includes a total of 14 421 cells, with each cell corresponding to the exposure for a job title, department, or work location for a one-year period. Exposure levels in the JEM were estimated to decline at three of the four mills from 1971 to 2009, but overexposures (ie, exceedances of the relevant occupational exposure limits) remained common at the end of the period., Conclusions: The JEM results highlight the need for ongoing exposure control efforts in the soft tissue paper industry, and will inform ongoing epidemiological studies of the health effects of exposure to paper dust in Sweden. It is freely available for use by other researchers., (© 2020 Wiley Periodicals, Inc.)

Purpose: To study respiratory effects of exposure to soft paper dust exposure, a relationship that is rarely studied., Methods: Soft tissue paper mill workers at a Swedish paper mill were investigated using a questionnaire and lung function and atopy screening. Spirometry without bronchodilation was performed with a dry wedge spirometer, and forced vital capacity (FVC) and forced expiratory volume in 1 s (FEV 1 ) were obtained and expressed as percent predicted. Exposure to soft paper dust was assessed from historical stationary and personal measurements of total dust, in addition to historical information about the work, department, and production. The impact of high exposure to soft paper dust (> 5 mg/m 3 ) vs. lower exposure ≤ 5 mg/m 3 , as well as cumulative exposure, was analyzed using multiple linear regression models. Multivariate models were adjusted for smoking, atopy, gender, and body mass index., Results: One hundred ninety-eight current workers (124 male and 74 female) were included. There were significant associations between both cumulative exposure and years of high exposure to soft paper dust and impaired lung function. Each year of high exposure to soft paper dust was associated with a 0.87% decrease in FEV 1 [95% confidence interval (CI) - 1.39 to - 0.35] and decreased FVC (- 0.54%, 95% CI - 1.00 to - 0.08) compared to the lower exposed workers., Conclusions: The present study shows that occupational exposure to soft paper dust (years exceeding 5 mg/m 3 total dust) is associated with lung function impairment and increased prevalence of obstructive lung function impairment.

Objectives: Occupational exposure to soft paper dust is associated with impaired lung function. Whether there is an increased risk for asthma or chronic obstructive pulmonary disease (COPD) is unclear., Methods: We studied 7870 workers from three Swedish soft paper mills, and defined high-exposed workers, as having been exposed to soft paper dust exceeding 5 mg/m 3 for at least 5 years. The remaining workers were classified as 'low exposed'. Person-years at risk were calculated and stratified according to gender, age and calendar-year. The follow-up time was from 1960 to 2013. The expected numbers of deaths were calculated using the Swedish population as reference and standardised mortality ratios (SMRs) with 95% CIs were assessed., Results: There was an increased mortality due to obstructive lung disease (asthma and COPD), among high-exposed workers, SMR 1.89, 95% CI 1.20 to 2.83, based on 23 observed cases. High-exposed workers had an increased mortality from asthma, SMR 4.13, 95% CI 1.78 to 8.14, based on eight observed cases. The increased asthma mortality was also observed among high-exposed men, SMR 4.38, 95% CI 1.42 to 10.2, based on five observed cases. The asthma mortality among low-exposed workers, both men and women, was not increased. The COPD mortality was not clearly increased among high-exposed workers (SMR 1.52, 95% CI 0.85 to 2.50)., Conclusion: High occupational exposure to soft paper dust increases the mortality due to asthma, and the results suggest that soft paper dust levels in workplaces should be below 5 mg/m 3 ., Competing Interests: Competing interests: None declared., (© Author(s) (or their employer(s)) 2020. Re-use permitted under CC BY-NC. No commercial re-use. See rights and permissions. Published by BMJ.)

Over the past two decades the Global South is witnessing unprecedented economic transformation and Asian Cities in particular have a remarkable upsurge. Coimbatore, an industrial city in Southern India with an estimated population of 2 million (in 2022) is witnessing a rapid transition in terms of infrastructure development. In this context, the present study attempts to assess the particulate matter (PM 10 and PM 2.5 ) emissions at road network construction sites and the heavy metal fractionation in the road dust/sediment samples with a core focus to quantify the bioavailable fraction of metals (Fe, Cu, Cr, Cd, Pb and Ni) and its source apportionment in the road side dust/sediment samples. About 60 composite road dust/sediment samples were collected for heavy metal fractionation analysis in the six arterial roads that undergo core developments like construction of road over bridges, additional road incorporation and street expansions. PM monitoring revealed that 24 h average PM 2.5 (47 µg/m 3 ) and PM 10 (69 µg/m 3 ) concentrations at many construction sites exceeded 24 h average recommended by WHO guidelines [PM 2.5 (15 µg/m 3 ) and PM 10 (45 µg/m 3 ), respectively]. The bioavailable fractions of Fe, Cu, Cr and Cd are notably higher in the roadside sediment samples at road construction sites. Health Risk assessment, such as carcinogenic risks (Children-4.41 × 10 -2 , Adult-3.598 × 10 -6 ) and non-carcinogenic risks, inferred substantial risks at high intensity construction sites with statistical analyses, including PCA and cluster analysis, indicating considerable anthropogenic influences in the heavy metal fractions., (© 2024. The Author(s), under exclusive licence to Springer Nature B.V.)

Bisphenol A (BPA) is found in polycarbonate plastic and epoxy resins and is used in a variety of commercial and consumer products. The leaching of BPA can result in human exposure via inhalation, ingestion, and dermal routes. As a result, humans have been exposed in their home and work environment to BPA. Conventional methods for BPA exposure assessment rely on cumbersome laboratory instrumentation with high capital and operational expenditures which limit the number of samples that can be analyzed. We report here the design of a compact portable colorimetric paper-based biosensing device with integrated sampling/analysis units for field-based measurements of BPA in indoor dust. The system employs interchangeable low-cost paper-based enzyme sensors as a test zone for BPA detection interfaced with an air-sampling cassette as a sample collection area. The sensor response was concentration-dependent with a detection limit of 0.28 μg/g. The sensor was validated with the conventional gas chromatography method and used to detect BPA exposure in household dust. BPA concentrations ranged from 0.05 to 3.87 μg/g in 57 household dust samples when both methods were used. The potential of this method for field measurements of dust samples is discussed.

Dust poses environmental, geological, health, and economic concerns, and microorganisms can help mitigate these adverse consequences by improving soil properties. Microbial calcium carbonate precipitation (MICP) has been found to be an efficient strategy for increasing soil strength, reducing soil porosity, and preventing erosion; however, severe environmental conditions such as pH and high temperatures may impede this process. To identify the best strain for MICP, 60 bacteria strains were obtained from arid soils using the enrichment culture technique. They were tested for the capacity of calcium carbonate deposition and biocement synthesis in stress environments. Phenotypic characterization indicated that the majority of the bacterial isolates were gram-positive and rod-shaped, with strong catalase and oxidase enzyme activity. Furthermore, MALDI-TOF MS identification revealed that the isolates were from the Bacillus and Pseudomonas genera. Scanning Electron Microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD) were used to analyze the microstructures and composition of bacterial cement. The results represented that B. subtilis isolate S56 has a higher production yield and forms distinctive calcite crystals as a result of fast urease synthesis. B. subtilis isolate S56 can be applied in situ to reduce soil erosion and dust pollution. This study reveals the potential of the B. subtilis S56 strain for soil consolidation and dust prevention in harsh environments and has the prospect of promoting its application in desertification control and ecological restoration., (© 2024. The Author(s).)

Background: The primary aim of the present study was to investigate if exposure to dust from absorbent hygiene products containing superabsorbent polymer is related to symptoms from the airways and from the eyes. The secondary aim was to estimate the current exposure to superabsorbent polymer among production and maintenance workers in a plant producing hygiene products., Methods: The cohort comprised 1043 workers of whom 689 were exposed to super absorbent polymer and 804 were exposed to paper dust (overlapping groups). There was 186 workers not exposed to either superabsorbent polymer or to paper dust They were investigated with a comprehensive questionnaire about exposure, asthma, rhinitis and symptoms from eyes and airways. The results were analyzed with logistic regression models adjusting for sex, age, atopy and smoking habits. An aerosol sampler equipped with a polytetrafluoroethylene filter with 1 μm pore size was used for personal samplings in order to measure inhalable dust and superabsorbent polymer., Results: The prevalence of nasal crusts (OR 1.4, 95% CI 1.01-2.0) and nose-bleeding (OR 1.7, 95% CI 1.2-2.4) was increased among the paper dust exposed workers (adjusted for superabsorbent polymer exposure). There were no significant effects associated with exposure to superabsorbent polymer (adjusted for paper dust exposure). The average exposure to inhalable levels of total dust (paper dust) varied between 0.40 and 1.37 mg/m³. For superabsorbent polymer dust the average exposure varied between 0.02 and 0.81 mg/m³., Conclusions: In conclusion, our study shows that workers manufacturing diapers in the hygiene industry have an increased prevalence of symptoms from the nose, especially nose-bleeding. There was no relation between exposure to superabsorbent polymer and symptoms from eyes, nose or respiratory tract, but exposure to paper dust was associated with nose-bleeding and nasal crusts. This group of workers had also a considerable exposure to superabsorbent polymer dust.

The aliphatic and polycyclic aromatic fractions of dust collected in the vicinity of recycled paper processing operations were analyzed using gas chromatography/mass spectrometry. Total measured dust concentration (up to 8.73+/-2.02 mg/m3) fluctuated substantially in the different steps of paper manufacture. This was attributed to the type of the operation such as, the release of fibers and particles during paper cutting and the use of reactive chemicals and excessive water under high temperature and pressure during the bleaching and the water rinsing/drying step. Particulate polycyclic aromatic hydrocarbons (PAHs) (from fluorene to benzo[ghi]perylene with mean concentrations from 3.8+/-0.5 to 41.4+/-0.4 ng/m3) and the unresolved mixture of branched, cyclic and unsaturated hydrocarbons (UCM) were measured in all samples while, n-alkanes from n-C20 to n-C27, were only observed in cutting and packaging areas (from 180.6+/-18.9 to 4297.9+/-794.9 ng/m3). The profile of occupational PAHs in bleaching and treatment of contaminated recycled raw paper was comparable to that observed for anthropogenic activities. The values of molecular diagnostic ratios indicated the contribution of oil residues and emissions from worklifts and other equipment used for pulp and paper handling. Total benzo[a]pyrene-equivalent (BaP) concentrations of particulate PAHs (varied from 323 up to 1104 pg/m3), provided evidence that workers were exposed to high quantities of PAHs as compared with exposures to urban air and other indoor settings, posing long-term threat to their health.

Objectives: A cohort study of female pulp and paper workers in Norway has shown a significantly increased risk of ovarian cancer. Other than the involvement of hormonal and reproductive factors, little is known of the etiology of ovarian cancer. Asbestos and talc are two agents hypothesized to influence the development of the disease. The present study aimed to investigate the association between ovarian cancer and occupational exposure to asbestos, talc, and total dust among Norwegian pulp and paper workers., Methods: Forty-six cases of ovarian cancer, with four controls each, were included in the study. Occupational exposure was assessed by combining work histories from personnel files, questionnaire information about production processes, and exposure assessments from the mills. To obtain information about possible confounders, cases and controls were invited to participate in a personal interview., Results: The odds ratio for asbestos exposure was 2.02, 95% confidence interval 0.72-5.66. For talc exposure, the odds ratio was 1.10, and for ever exposure to total dust, it was below 1.00. The risk estimates did not essentially differ after adjustment for possible confounding variables., Conclusions: The results do not confirm an association between exposure to asbestos, talc, and total dust and ovarian cancer among Norwegian pulp and paper workers. However, the odds ratio for asbestos exposure was doubled, and control for established nonoccupational risk factors did not change the estimate. Therefore, the possibility that exposure to substances in the work environment contributes to the elevated risk cannot be rejected.

Objectives: To clarify whether occupational exposure to paper-dust is associated with an increased risk of non-infectious rhinitis., Methods: Thirty-seven workers exposed to paper-dust in a soft-paper mill were compared with 36 unexposed controls. The study was performed under normal working conditions during the non-pollen season. Medical and occupational history was taken down in a comprehensive questionnaire and nasal symptoms were scored on a visual analogue scale (VAS). Pulmonary and nasal function was assessed by spirometry, acoustic rhinometry and peak nasal inspiratory flow. Nasal lavage was analysed for interleukin-8 (IL-8) and nasal transit time was monitored with the saccharine test. Concentrations of inhalable dust for each exposed subject during the day of the clinical study were measured with personal sampling devices., Results: There was an increased prevalence of nasal blockage and crust formation among the exposed workers. However, there was no difference with regard to acoustic rhinometry, nasal transit time or nasal peak inspiratory flow. In the whole population, IL-8 in nasal lavage was higher among men than among women, 193 ng/l vs 132 ng/l, P = 0.006. There was also a positive trend (P = 0.01) with increasing nasal IL-8 going from non-smokers (122 ng/l), ex-smokers (126 ng/l) to current smokers (235 ng/l)., Conclusions: We have found that occupational exposure to paper-dust is associated with symptoms of nasal blockage and nasal crusting. We find no objective signs of nasal inflammation, even among the subgroup with the highest current exposure.

Exposure to organic dusts may cause airways inflammation in a large proportion of exposed persons. Most studies have relied on questionnaires and spirometry for diagnosis. To assess the possibility of determining the presence of inflammation using clinical diagnostic procedures, a study was undertaken among workers in a paper industry. Participants were 83 workers and 44 controls. Airborne endotoxin and (1-->3)-beta-D-glucan levels at the worksites were determined. The effects of this exposure were evaluated using a questionnaire, spirometry and measurements of airway responsiveness (methacholine) and levels of eosinophil cationic protein (ECP), myeloperoxidase (MPO), and C-reactive protein (CRP) in serum. The workers had a decreased baseline forced expiratory volume in one second (FEV1) and an increased airway responsiveness compared with controls. The concentrations of ECP and MPO were elevated compared with controls. There was a relation between exposure to endotoxin and (1-->3)-beta-D-glucan and airway responsiveness as well as ECP levels, when controlling for age, sex, smoking habits, atopy and asthma. The results suggest an increased prevalence of subjective respiratory symptoms, and an increased airway responsiveness among exposed workers. There was also a relationship between the serum concentration of eosinophil cationic protein and airway responsiveness. Taken together, the results suggest the presence of airways inflammation in the workers.

The effects of recycling paper dust extract on isolated nonsensitized guinea pig tracheal smooth muscle were studied in vitro. Dust extract was prepared as a 1:10 w/v aqueous solution. Dose related contractions of guinea pig tracheal rings were elicited with paper dust extract. Pharmacologic studies were performed with atropine (10(-6) M), indomethacine (10(-6) M), pyrilamine (10(-6) M), Ly 171883 (10(-5) M), NDGA (10(-5) M) and TMB8 (10(-5) M). The effects of extract were almost totally inhibited by the anticholinergic agent atropine, suggesting that a principal pathway mediating this response may involve the parasympathetic nervous system. The intracellular calcium blocking agent TMB8 also induced a reduction of the contractile response to paper dust extract, which is consistent with intracellular calcium's well established role in smooth muscle constriction. We suggest that paper dust extract causes dose related airway smooth muscle constriction, possibly associated with the release of cholinergic as well as other mediators. The constrictor effect does not require tissue presensitization.

The effect of paper dust collected at two different locations in a paper recycling plant (PD1 and PD2) on isolated nonsensitized guinea pig tracheal smooth muscle was studied in vitro. Dust extracts were prepared as a 1:10 w/v aqueous solution. Dose-related contractions of guinea pig tracheal rings were elicited with both PD1 and PD2. Pharmacologic studies were performed with atropine (10(-6) M), indometacin (10(-6) M), pyrilamine (10(-6) M), LY171883 (10(-5) M), nordihydroguaiaretic acid (10(-5) M), and TMB8 (10(-5) M). The possible role of endogenous neuropeptides in this constrictor process was studied by depleting neural mediators with capsaicin (5 x 10(-6) M) before challenge with dust extracts. Constrictor effects were partially inhibited by a wide variety of the mediator blocking agents. The effects of both extracts were almost totally inhibited by the anticholinergic agent atropine, suggesting that a principal pathway mediating this response may involve the parasympathetic nervous system. The intracellular calcium-blocking agent TMB8 also induced a reduction of the contractile responses to PD1 and PD2 consistent with the well established role of intracellular calcium in smooth muscle constriction. Pretreatment with capsaicin significantly increased the contractile activity of paper dust extracts but only at the higher doses of these extracts. This suggests that the effect of paper dust is not initiated by the release of mediators stored in sensory nerves but that the prerelease of these mediators may enhance the constrictor effects of these dusts. We suggest that paper dust extracts cause dose-related airway smooth muscle constriction possibly associated with the release of cholinergic as well as other mediators. The constrictor effect does not require tissue presensitization or the release of neuropeptides from sensory nerves.

Leaking manhole covers add inflow to sanitary sewer systems. These are the most accessible components of the sewer system, and so potentially the cheapest to repair or modify, to reduce inflow. There is, however, very little data regarding manhole cover leakage available to evaluate the cost-benefit of such an approach, and there is no field data. So, a multi-year field study of inflow was conducted. Two-hundred and fifty manholes in New York City and surrounding towns were tested. A key field observation in this study was that a dust and grit seal typically built up between the cover and the rim. This seal had a big impact on leakage rates. This made testing in-situ a necessity, and the test method had to preserve this seal. Due to the presence of the dust and grit seal, approximately 80% of the manholes tested showed no leakage. A further 15% had slow leaks. Only 5% had significant leaks., Competing Interests: The authors declare there is no conflict., (© 2024 The Author This is an Open Access article distributed under the terms of the Creative Commons Attribution Licence (CC BY 4.0), which permits copying, adaptation and redistribution, provided the original work is properly cited (http://creativecommons.org/licenses/by/4.0/).)

Purpose: To study cancer mortality among Swedish pulp and paper mill workers by main mill pulping process and department, and to present the Swedish part of an international exposure measurements database., Methods: A cohort of 18,163 male and 2,290 female workers at four sulfate and four sulfite mills, enrolled from 1939 to 1999, was followed up for mortality during 1952-2001. Standardized mortality ratios (SMRs) relative to the general Swedish population were calculated., Results: There were 1,340 malignant cases out of 5,898 deaths. Total cancer mortality was not increased in either sulfate or sulfite mill workers, or by gender. Lung cancer mortality was increased among female workers (SMR 1.70, 95% CI 1.04-2.63), especially in paper production, but not among male workers (SMR 0.91, 95% CI 0.79-1.04). Exposure to wood dust and sulfur dioxide frequently exceeded occupational exposure limits., Conclusions: Female paper production workers had an increased mortality from lung cancer.

The aim of the present cohort study was to investigate whether exposure to paper dust causes increased risk for respiratory symptoms or asthma. The cohort included all workers at a soft paper mill who had worked there for more than 1 year 1960-1986 (n = 1,697). Randomly selected inhabitants of the mill town (n = 781) were used as unexposed referents. Both groups were investigated using a postal questionnaire. From the paper mill cohort, workers with high cumulative exposure (n = 313), with medium cumulative exposure (n = 321), and with low cumulative exposure (n = 338) to paper dust were selected. In the 1960s and 1970s, the dust levels were between 5 and 10 mg/m3. After adjustment for smoking and gender, paper dust exposure resulted in elevated prevalence ratios for chronic cough, chronic phlegm, wheeze, and breathlessness. The prevalence ratios ranged from 1.3 to 2.5. No significantly increased risk of asthma was found among the exposed, incidence rate ratio 1.4 (95% confidence interval 0.93-1.8). Among the exposed, there was an insignificantly increasing incidence rate ratio, 1.0, 1.4, 2.1, with increasing cumulative exposure. In conclusion, an increased risk for respiratory symptoms was observed among workers exposed to paper dust, but the study does not permit any definite conclusions regarding asthma and paper dust exposure.

Lung function deterioration has been reported among workers exposed to heavy exposure to paper dust (greater than 5 mg/m3). This pilot study was undertaken in order to evaluate the health effects of low exposure to paper dust (less than or equal to 1 mg/m3) in bookbinders. The study population consisted of 20 exposed subjects and 18 local office subjects. They were studied during identical conditions by means of dynamic and static spirometry, single breath wash-out with nitrogen (N2) and carbon monoxide (CO). The 90th percentile for daily average values of total dust was 0.6 mg/m3. Non-smoking exposed subjects had on the average an increase in FEV% (forced expiratory volume in one second in percentage of vital capacity) when compared to non-smoking local control subjects. We found a weak correlation between the increase in FEV% and daily average values of total dust (probably reflecting a higher exposure in the past). The results suggest that a low exposure to paper dust in bookbinders with a time of employment more than 10 years might cause a slight lung function deterioration without a clinical relevance.

The contributors used the sensibilization threshold to establish MACs for the dust of the fodder yeast produced as a result of pulp and paper waste products' recycling. The product belongs to the group of substances with low toxicity. It does not produce local irritation and exhibits sensibilization properties in case of both epi- and intracutaneous introduction. The sensibilization threshold in repeated introductions of protein-containing dusts was registered at 4.1 mg/m3. In industrial conditions, the fodder yeast concentrations at the level of about 4 mg/m3 caused increased morbidity with temporary disability.

The characteristics of airborne dust in a soft paper production plant have been characterized by scanning and transmission electron microscopy. A combination of X-ray diffraction, electron diffraction and energy-dispersive X-ray flouresence spectroscopy (EDX) was used to determine the structure and composition of the different components. Size distribution determination and phase identification were carried out. Besides the cellulose fibres, fibres of kaolinite, wollastonite, talc and other silicates were also identified. Gravimetric analysis and fibre counting by optical phase contrast microscopy were used to determine total dust and fibre concentrations. Total dust exposure at the plant was generally below 3 mg m-3. The respirable fraction of the total dust concentrations varied from 15 to 70%. The inorganic dust was 36 +/- 15% of the total dust. The ratio of inorganic fibres to total fibre concentration at the plant varied between 10 and 15%.

Solar cells are considered one of the most important and widespread solar applications in the world. However, the performance of the PV modules is significantly affected by the dust in the air. This paper, therefore, presents a comparison of an outdoor experimental study of dust effect on monocrystalline, and polycrystalline photovoltaic (PV) modules. For analysis, four 100 W PVs were installed horizontally in Sohar, Oman. For each pair of PV modules, one was left dusty due to environmental impact, and the second was cleaned daily. PV performance and environmental parameter measurements were conducted every 30 min for 35 days. The effects of dust on current, voltage, power, and energy were discussed in terms of time and normalized values. Also, cleaning methods were tested to determine the optimum one. It is found that power degradation of monocrystalline (20%) is higher compared with polycrystalline (12%) due to dust accumulation. For monocrystalline, the current, voltage, and power losses ranged between 10.0-24.0%, 2.0-3.5%, and 14.0-31.0%, respectively. However, for polycrystalline, the degradation rates were 16.88-27.92%, 0.455-0.455%, and 17.14-28.1% for current, voltage, and power losses after exposure to outdoor conditions for the same period, respectively. The dust accumulation on the PV surface found after 5 weeks is 0.493 mg/cm 2 , which can be considered the lowest accumulation rate compared to other Gulf countries, but which, however, leads to less energy degradation as well. It is found that water is sufficient to clean PV in the study area. However, sodium detergent as a cleaner introduced better results compared to water, especially when there is high pollution in the location., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The technical properties of three layered cement-bonded boards (CBBs) made from wastepaper and sawdust were investigated. The CBBs were produced at three density levels of 1000, 1200 and 1300 kg/m3 and at four cement/particle ratios of 2.0:1, 2.5:1, 3.0:1 and 3.5:1 on a weight to weight basis. The technical properties evaluated were modulus of rupture (MOR), modulus of elasticity (MOE), water absorption (WA) and thickness swelling (TS). The MOR values ranged from 4.85 to 11.69 MPa and MOE values ranged from 2.80 to 5.57 GPa. The mean values of WA and TS after 24 h of water soaking of the CBBs ranged from 18.18% to 40.49% and 3.55% to 12.13%, respectively. MOR and MOE of the CBBs increased with increase in board density, but MOR decreased with the increase in cement/particle ratio. On the other hand, WA and TS decreased with increase in board density and cement/particle ratio. CBBs produced from wastepaper and sawdust at cement/particle ratios of 3.0:1 and 3.5:1 are suitable for building construction such as paneling, ceiling and partitioning.

Cremation is commonly practiced around the world because it requires small space for the disposal of ashes. Among various options for ash disposal, many people choose to scatter the ashes of their loved ones in a scattering garden. What are the impacts of ash scattering on the vegetation of the garden? Is scattering garden a sustainable solution to the disposal of cremated ashes? This study aimed at answering these questions by characterizing and assessing the vegetation performance of a scattering garden using remote sensing techniques and field measurements. The results indicated that, overall, approximately half of vegetation was degraded to either unhealthy or bare soil. The area of bare soil in the lawns of high scattering level was larger than that of low scattering level. Furthermore, the belowground biomass of vegetation in the lawns of high scattering level was significantly lower than that of low scattering level. It is concluded that the current practice of ash scattering in Hong Kong was not sustainable and the intensity of impacts was dependent upon the level of ash scattering. The findings of this study may provide a reference for the policy and management of ash scattering in Hong Kong and other cities around the world., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Sustainability in road construction can be achieved by integrating recycled materials in the production of new pavement. One such approach is using reclaimed asphalt pavement materials (RAPM) in hot mix asphalt (HMA). Successful implementation of RAPM in HMA can only be achieved by having good comprehension of the essential material characterisation and design process. The main objective of this review is to summarise the literature and provide a keen understanding of the characterisation of materials involved (RAPM and rejuvenators) and mix design, by giving due consideration to the interaction of virgin and recycled materials. Widely used techniques for extraction and recovery of reclaimed asphalt pavement (RAP) binder have been reviewed. The advantages and disadvantages of different characterisation techniques are identified. The effect of various factors on the volumetrics of the recycled mixes is presented. Insight in to the requirements of a rejuvenator by taking into account the changes in binder after ageing is provided. Aspects that need further exploration to normalise and increase the confidence of RAPM in HMA are also highlighted as the future recommendations., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Phthalic acid esters (PAEs) commonly used as plasticizers are distributed ubiquitously in the living environment. We conducted a field study to examine the associations between PAE residue in dust and home characteristics/living habits in 47 rural homes in Taiwan. A questionnaire regarding home characteristics/living habits and composite sampling of house dust were conducted in each participating home. Five PAEs were selected for analysis on gas chromatography-mass spectrometry with the limits of quantification being 0.5 ng/g or lower. Uni- and multivariate linear regression analyses were performed for examining the associations. The five PAEs were prevalently detected from the samples, and the concentrations were below 1000 ng/g; di(2-ethylhexyl) phthalate (DEHP) was the most frequently detected PAE (85%), whereas di-isobutyl phthalate (DiBP) appeared to the most abundant congener with the maximum concentration of 807.65 ng/g. Floor cleaning frequency and use of detergents for floor cleaning were significantly associated with DEHP in dust (P < 0.05), suggesting additives of plasticizers in detergent products. The factors of plastic wraps in storage and use of disposable cups were both significantly related to DiBP (P < 0.01), which could be extensively used in food packaging products. We confirmed that several home characteristics/living habits were related to certain PAE residue in dust., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The aim of the present cross-sectional study was to investigate whether long-term exposure to soft paper dust causes impairment of lung function. Exposed workers (n = 287) and referents (n = 79) were investigated, using spirometry and questionnaires. Personal samplings of total dust showed that the actual mean concentrations did not exceed 3 mg/m3. The exposed subjects were divided into three categories according to historical and present exposure to paper dust; low exposure, moderate exposure and high exposure. The study did not show any lung function impairment due to exposure to paper dust. However, the exposed subjects had a significantly increased prevalence of symptoms from both the upper and lower airways as well as an increased prevalence of reported asthma. On the basis of our study, we conclude that lung function impairment does not occur among workers exposed to mean levels of soft paper dust below 5 mg/m3.

The objective of this study was to investigate if the dust in a mill producing soft paper tissue caused respiratory symptoms or impaired respiratory function. Using a questionnaire and spirometry, 355 persons were examined. They were divided into three groups according to present exposure to dust; low (less than 1 mg/m3), moderate (1-5 mg/m3) and heavy (greater than 5 mg/m3). There was a dose-dependent increase of symptoms from the upper respiratory tract. However, coughing and coughing with phlegm were not found to be more common among persons with heavy exposure compared to those with low exposure to the dust. There was no difference in FEV1 or FVC during a work shift. Persons with long-term (greater than 10 years) and heavy exposure to dust seemed to have impaired respiratory function compared to those with low and/or short-term exposure to the dust.

In a cross-sectional study, 13 nonsmoking men with heavy exposure to paper dust were compared with 14 unexposed men, mainly office workers, employed at the same paper mill. They were studied using questionnaires, physical examinations, pulmonary function studies, and chest radiographs. Among those exposed there was an increased lung elastic recoil pressure (Pel) compared with controls which was significant (p less than 0.05) at the maximal level of total lung capacity (100% TLC). Furthermore, among the exposed workers there was also a significantly (p less than 0.05) decreased residual volume (RV). Two of the exposed men underwent lung biopsies, one of which showed fibrotic alveolar walls. Among the exposed there was also a significant (p less than 0.05) predominance of symptoms from the lower respiratory tract. We suggest that the observed pulmonary function impairment taken together with the histological examination of the lung biopsies are signs of a nonspecific reaction to high levels of paper dust.

The prevalence of bagassosis was investigated in a Louisiana paper mill, which in the past had considerable numbers of workers with the disease. Based on negative clinical histories and the low number of positive serological reactions of the workers' serum with Thermoactinomyces sacchari antigen, it was concluded that bagassosis was no longer present. This was thought to be due to a different method of storage of bagasse, which retards microbial decay and reduces airborne organic dust, and to the increased awareness of plant management resulting in greater safety measures.

Soil fugitive dust pollution caused by urban construction sites is a significant problem. To improve the dust suppression efficiency on the urban construction sites, hydroxypropyl guar (HPG), dodecyl dimethyl amine oxide (OB-2), and hydroxypropyl methylcellulose (HPMC) were selected as individual components of the composite dust suppressant using a single-factor test. The response surface methodology (RSM) was used to determine the optimal mixing proportions. After preparation, the characteristics of the composite dust suppressant were tested. Fourier-transform infrared spectroscopy and scanning electron microscopy (SEM) were used to characterize the composite dust suppressant and explore its mechanism. The results showed that 0.327% HPG, 0.6% OB-2, and 0.5% HPMC were the best compound concentrations. Under optimum conditions, the viscosity of the composite dust suppressant was 151.1 [Formula: see text], penetration time was 61.4 s, and water retention rate was 30.67%. Compared with traditional dust control by spraying water, it showed better resistance to evaporation at high temperatures and better wind erosion resistance. The antievaporation rate was 39.42% at 60 °C. After 11 d of continuous wind erosion at level 7, the wind erosion resistance rate was as high as 98.24%. The reason for the excellent dust suppression effect of the composite dust suppressant is that the methyl and hydroxyl groups in the solution diffuse to the surface of the soil fugitive dust particles using Brownian motion and gradually approach the corresponding groups in the soil fugitive dust particles. When the distance between the two reaches 10 [Formula: see text], adsorption occurs, causing small dust particles to stick together. Because of the stability of the covalent bonds in the methyl and hydroxyl groups, a stable solidified layer is formed on the soil fugitive dust surface after the evaporation of the composite dust inhibitor solution, thereby avoiding secondary dust. In addition, the composite dust suppressant is noncorrosive and friendly to the construction site environment. Therefore, the composite dust suppressant can effectively reduce soil fugitive dust, alleviate environmental pollution, and provide a reference for preventing and controlling soil fugitive dust on urban construction sites and preparing composite environment-friendly dust suppressants., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

This article investigates the Dust Storm Index (DSI) and its trend using the Mann-Kendall test, across urban areas of Iran on the monthly, seasonally, and annually scales from 2000 to 2018. The results showed that cities located in the humid region, especially Khoram Abad and Avaj, had the lowest DSI values, and the cities located in arid regions, particularly Zabol, Sarakhs, and Zahedan, had the highest DSI values during the study period. On a monthly basis, the positive trends were observed in most cities of Iran in March, October, and August, while the negative trends were mainly observed in Feb, May, and June. Birjand, Torbat Heydariyeh, Saveh, Shiraz, and Kerman showed an increasing trend of DSI in most months of the study period. On a seasonal scale, the autumn and summer DSI changes showed significant positive trends in 18% of the urban environments in Iran. A similar trend was observed for 17% and 15% of study urban areas in the spring and winter, respectively. On an annual scale, the significant upward trends in DSI were observed in 13% while its negative changes were found in 10% of study cities. These results can be useful for decision-makers and managers to take appropriate measures to reduce and control dust events in urban areas that have suffered from the increasing trend of dust events in the past years., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

In order to ensure the best dust removal on the basis of the optimal gas emission, and to determine the best dust and gas exhaust air volume, numerical simulation research was carried out on the airflow-dust-gas field of the fully mechanized driving face. The results indicate that under different air volumes, with an increase in the distance from the head-on, the airflow velocity of the fully mechanized driving face first increased and then decreased, and gradually tended to be stable. When Q = 800-900 m 3 /min, the head-on gas dilution ability is strong and the range of high gas content was the minimum. When Q > 900 m 3 /min, the gas dilution efficiency was reduced and easy to cause secondary dust. In the height of the respiratory zone, the relationship between the dust concentration distribution and air volume is [Formula: see text], and that between the gas content and air volume is [Formula: see text]. Finally, the optimal air volume range was determined to be Q = 800-900 m 3 /min. By comparing the measured and simulated airflow velocity, dust concentration, and gas content, the average errors were 6.77%, 6.83%, and 7.73%, respectively, which proves the reliability of the numerical simulation results., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Background: Sensitive skin is related to environmental factors., Objectives: We aimed to investigate the roles of poorly known associated and triggering factors on sensitive skin in a large global population., Methods: A survey was administrated to a representative sample of the adult population aged 18-75 years in five different countries (Brazil, China, France Russia, and the United States). All participants answered a web-based questionnaire on sociodemographic characteristics, sensitive skin and environmental factors., Results: Among the 10 743 included individuals (5285 men and 5458 women), 48.2% declared that they had sensitive skin. The group with sensitive skin reported significant increases in fatigue, dust or sweating and to a lesser extent food or tobacco consumption. The members of this group also declared that they experienced more sleep disorders than individuals without sensitive skin. Sensitive skin was very frequent in pregnant women, women with painful menstruations or women using contraceptive pills., Conclusions: This large cohort study identified new factors, including female hormonal status, fatigue, sleep disorders and food, associated with sensitive skin. These associations suggest that sensitive skin is not restricted to an epidermal disorder but may be included in a larger context. The identified factors are potential upstream drivers of neurogenic inflammation in sensitive skin., (© 2021 European Academy of Dermatology and Venereology.)

Exploring the spatial correlation characteristics and influencing factors of industrial agglomeration and pollution discharge, which is of great significance to reduce industrial pollution discharge and promote China's construction of an ecological civilization. Taking 284 prefecture-level cities in China in 2017 as the research object, this study used spatial autocorrelation analysis method to explore the spatial agglomeration characteristics and spatial correlation of industrial agglomeration and industrial pollution discharge, and spatial econometric analysis method was used to explore the main factors affecting industrial pollution discharge. The research results showed that the level of industrial agglomeration in China exhibited a spatial distribution characteristic of "high in the east and low in the west". The total discharge and discharge intensity of industrial pollutants showed a spatial pattern of "high in the north and low in the south" in general, and industrial agglomeration, total discharge, and discharge intensity of industrial pollution showed significant spatial autocorrelation. Moreover, industrial agglomeration had a strong local spatial correlation with the total and intensity of industrial wastewater, industrial SO 2 , and industrial smoke and dust, and the main agglomeration types were high agglomeration-low pollution, low agglomeration-high pollution, and low agglomeration-low pollution. In addition, industrial agglomeration had a positive impact on the total industrial wastewater discharge, and had a negative impact on the total industrial smoke and dust discharge, industrial wastewater discharge intensity, industrial SO 2 discharge intensity, and industrial smoke and dust discharge intensity., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Cement is an essential material used in constructional activities. An emerging concern in the industry however is the CO 2 emissions, which are triggered by cement manufacturing units. These emissions can be controlled to some extent by not using cement exclusively and instead replacing a percentage of it with waste material with properties similar to cement. Electric arc furnace dust (EAFD) and rice straw ash (RSA) are waste materials from industrial and agricultural sources which also contain similar constituents that are present in cement. Thus, the objective of this study is to check the effect of EAFD and RSA on concrete properties with the application of Aspergillus niger and Bacillus megaterium. Taguchi's design of experiments has been utilised to explore the effect of operating parameters (i.e. EAFD and RSA replacement (5%, 10% and 15%), curing period of concrete cubes (7, 14 and 28 days) and cell count of fungus/bacteria (10 4 , 10 6 and 10 8 CFU/ml)) on the compressive strength and water absorption capacity of concrete blocks in three different scenarios. Optimisation has then been carried out by using the multi-objective genetic algorithm to evaluate the maximum performance of concrete. However, the results of the study indicate best performance in the 2nd context where dust replacement, curing time and cell count were 5%, 18 days and 9.39 × 10 7 cells per ml of water, respectively, for concrete production utilising Aspergillus niger., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Endotoxins in grain dust, household dust, and animal bedding may induce respiratory symptoms in rodents and humans. We assayed the endotoxin, coliform, and dust levels in 20 types of rodent bedding. Endotoxin concentrations were measured by using a commercial test kit, coliform counts were determined by using conventional microbiologic procedures, and dust content was evaluated by using a rotating-tapping shaker. Paper bedding types contained significantly less endotoxin than did other bedding types; the highest levels of endotoxin were detected in hardwood and corncob beddings. The range of endotoxin content for each bedding type was: corncob bedding, 1913 to 4504 endotoxin units per gram (EU/g); hardwood bedding, 3121 to 5401 EU/g; corncob-paper mixed bedding, 1586 to 2416 EU/g; and paper bedding, less than 5 to 105 EU/g. Coliform counts varied from less than 10 to 7591 cfu/g in corncob beddings, 90 to 4010 cfu/g in corncob-paper mixed beddings, less than 10 to 137 cfu/g in hardwood beddings, and less than 10 cfu/g in paper beddings. Average dust content was less than 0.15% in all commercial bedding types. We conclude that paper bedding is the optimal bedding type for conducting LPS inhalation studies and that rodent bedding containing high levels of endotoxin may alter the results of respiratory and immunologic studies in rodents.

Organic dust exposure can influence the development and symptoms of immune-related diseases such as atopy and asthma, but has rarely been examined in relation to systemic autoimmunity. The present analyses explore the association of lifetime farm and occupational organic dust exposures with systemic lupus erythematosus (SLE) in recently diagnosed patients (n = 265) compared with controls (n = 355) frequency matched by age, sex and state. Questionnaire data included childhood farm residence, childhood and adult experience with specific crops, and adult work in textiles, hog or poultry processing and paper or furniture manufacture. Adjusted odds ratios (OR) and 95% confidence intervals (CI) were estimated by logistic regression models including age, sex, state, race, education and silica exposure. Overall childhood or adult farm contact and childhood farm residence were not associated with SLE. Farm contact with livestock was inversely associated with SLE (OR = 0.55, 95% CI 0.35, 0.88). This effect was most pronounced among those with childhood farm residence and both childhood and adult livestock exposure (OR = 0.19; 95% CI 0.06, 0.63), but was difficult to separate from adult exposure to grains or corn. Other adult occupational exposures were not associated with SLE risk overall, regardless of childhood farm residence or livestock exposure, although an inverse association was seen among non-smokers (OR = 0.59; 95% CI 0.33, 1.1), particularly for textile work (OR = 0.34; 95% CI 0.19, 0.64). These exploratory findings support the development of studies to specifically investigate the effects of organic dust exposure on SLE risk, with particular attention to exposure assessment and characterization of demographics, smoking and other occupational exposures.

Aiming at the problems of complex environment and serious dust pollution in large open-pit coal yards, a dust suppression gel with a dual network structure was prepared by modifying the soluble starch and sodium alginate with iron ions. The changes of functional groups, thermal stability, and morphology structure before and after the reaction were analyzed by FTIR, TG-DSC, and SEM, and the formation mechanism of the dual network was revealed by XPS. Furthermore, the water absorption and water retention experiments proved that the dual network structure is more conducive to water retention than the single-layer network. According to molecular dynamics simulations and contact angle experiments, gel and adsorbed water molecules can approach coal dust molecules on their own to contact, wet, and combine with coal dust. The adhesion test proved that the dust suppression gel with iron ions had better adhesion to dust. The anti-freezing test shows that the dust suppression gel has good anti-freezing performance. The antifreeze test shows that the dust suppression gel still has excellent freeze-thaw resistance at the test temperature of  -20℃. The mechanical property test shows that the dust suppressant gel can prevent the product from being damaged by external force. The acid and alkali resistance experiments showed that the acid and alkali resistance of the gel was improved under the condition of iron ion modification, and the flying of coal powder was effectively prevented. This research provides a new theoretical idea for coal dust control in complex environment., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

To obtain the adaptability range of the single-filter cartridge dust collector, a numerical analysis of the key component (filter cartridge) that affects the filter performance of the dust collector is carried out. The study found that the filtration air velocity gradually decreases from the top A to the bottom C of the filter cartridge surface. During the filtration process, along the surface of the filter cartridge from C to A, the pressure first drops and then rises. At C, the negative pressure is the largest, with an average of about 525 Pa. The ineffective filtration area of section A of the upper part of the filter cartridge accounts for 2/5 of the filtration area, and the concentration of the first layer of dust is y = (0.01 ± a) + 0.02 × (0.08 ± b) x exponentially decreasing. The critical particle size range that the filter cartridge can filter dust is M≥1.87 μm, and the best dust removal range of the dust collector is N≥4.625 μm. An agreement between experiment and simulating results proves the validity of simulation model and reliability of the experimental data. Enterprises can choose a reasonable dust removal method based on the research results to optimize the adaptability of the working environment and the dust collector. It also provides a theoretical basis for researchers to solve the problems in the filtration and cleaning process., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

In arid ecosystems, where the soil is directly exposed to the action of the wind due to sparse vegetation, dust aerosolization is a consequence of soil degradation and concomitantly, a major vector of microbial dispersal. Disturbances such as livestock grazing or fire can exacerbate wind erosion and dust production. Here, we sampled surface soils in 29 locations across an arid landscape in southwestern USA and characterized their prokaryotic and fungal communities. At four of these locations, we also sampled potential fugitive dust. By comparing the composition of soil and dust samples, we determined the role of dust dispersal in structuring the biogeography of soil microorganisms across the landscape. For Bacteria/Archaea, we found dust associated taxa to have on average, higher regional occupancies compared to soil associated taxa. Complementarily, we found dust samples to harbour a higher amount of widely distributed taxa compared to soil samples. Overall, our study shows how dust dispersal plays a role in the spatial distribution of soil Bacteria/Archaea, but not soil Fungi, and might inform indicators of soil health and stability in arid ecosystems., (© 2022 Society for Applied Microbiology and John Wiley & Sons Ltd.)

Aims: To correlate the prevalence of respiratory tract symptoms and diseases with dust and fibre exposure in the soft tissue industry in Germany., Methods: Ambient monitoring was performed for inhalable, respirable dust and fibres in seven soft tissue producing factories. In 441 workers (72 controls, 90 moderate, 279 high exposure) a standardised questionnaire on respiratory symptoms, diseases, occupational history, and smoking habits was used. Crude differences in the prevalence of respiratory symptoms and diseases were assessed. Logistic regression analysis was used to determine the relation between the respiratory symptoms/diseases and the cumulative dust and fibre exposure, respectively, while adjusting for age, gender, smoking habits, and factory. The effects of exposure intensity and duration were differentiated by categorising dust/fibre concentrations and years of exposure separately and setting up logistic regression models., Results: The mean concentrations for inhalable, respirable, and fibrous dusts were 10.3 mg/m(3), 0.22 mg/m(3), and 415,000 fibres/m(3). Adjusted odds ratios (OR) with relation to cumulative dust exposure intensity were significantly raised for blocked nose (18.2), mucosal irritation (6.5), dry nose (8.9), cough (3.5), phlegm (7.5), exercise induced dyspnoea (2.6), hoarseness (11.3), and sneezing attacks (7.9) (ORs for highest exposure categories). Cumulative dust or fibre exposure had no significant effects on the prevalence of respiratory diseases. For all symptoms with significantly raised ORs, combined effects of intensity and duration of exposure were found., Conclusions: Because of the high prevalence of respiratory symptoms a reduction of dust exposures is recommended. Chronic exposure effects could not be found in this study, however, a healthy worker effect has to be considered.

Bisphenol A (BPA) and alternative bisphenols are widely used in the industrial production of polycarbonates and resin polymers. Adverse effects on human health have been described for BPA and owing to the structural similarity of alternative bisphenols and derivatives, a similar toxicity profile is expectable. Dust can act as a sink for bisphenols owing to the large surface area to mass ratio. Human risk exposure to bisphenols via indoor dust has been widely assessed in the last decade. The environmental conditions inside greenhouses, among other factors, facilitate that chemicals are released from greenhouse building materials to dust. This study aims to explore for the first time the potential of greenhouse dust as a new source of bisphenols for human exposure. For this purpose, a supramolecular solvent-based method was applied to the extraction of twenty-one bisphenols from greenhouse dust, prior to their determination by liquid chromatography-tandem mass spectrometry. Nineteen bisphenols were found in the five greenhouse dust samples analysed, with concentrations ranging from 5275 ng g -1 (BPA) to 0.25 ng g -1 (trichlorobisphenol A). The average daily dose (ADD) via dust ingestion for bisphenol compounds was calculated, in order to estimate the occupational exposure for inadvertent dust ingestion. Despite the calculated ADD value for BPA (47.81 ng kg -1  day -1 ) being below the tolerable daily intake proposed by EFSA (4·10 3  ng kg -1  day -1 ), this value was considerably higher than those previously reported for indoor dust, which brings to light the importance of considering greenhouse dust as bisphenols source of exposure for greenhouse workers., (© 2022. The Author(s).)

A complex and varied antibody response to allergens, in particular Dermatophagoides pteronyssinus, is observed in the serum of allergic patients. To examine the role of cross-reacting antigenic determinants in allergy, a strategy has been devised for isolating antibody populations that bind to individual polypeptides of an allergen source separated by sodium dodecyl sulfate-polyacrylamide electrophoresis and electroblotted to nitrocellulose. Polypeptides are identified on the blots, desorbed and coupled to CNBr-activated paper discs. The coupled discs are then used as immunoadsorbent surfaces for the binding of antibodies from allergic sera. Antibodies eluted from the polypeptide immunoadsorbents are then used to reprobe protein blots of the allergen. Results are presented which demonstrate strong cross-reaction between two major mite allergens, Der p I and Der p III, and some weaker intra-species cross-reactivities.

Road dust, which reflects ambient air quality, receives various pollutants including toxic metal(oid)s from several natural and/or anthropogenic sources. This manuscript reports a comprehensive evaluation of the levels of seventeen metal(oid)s in road dust of a megacity (Dhaka, Bangladesh). Different evaluation approaches were implemented including statistical analysis and GIS mapping, besides environmental, ecological, and human health risk indices. From 30 sampling sites, representative samples were collected, which were analyzed by neutron activation analysis. The average concentrations (± SD) of Na, Mg, Al, Sc, Ti, V, Cr, Mn, Fe, Co, Zn, As, Rb, Sb, Cs, Ba, and W were 11,738 ± 560 µg g -1 , 12,410 ± 1249 µg g -1 , 62,127 ± 5937 µg g -1 , 8.89 ± 0.47 µg g -1 , 5224 ± 1244 µg g -1 , 66 ± 8 µg g -1 , 66.7 ± 6.9 µg g -1 , 547 ± 110 µg g -1 , 25,150 ± 1723 µg g -1 , 8.39 ± 0.65 µg g -1 , 125 ± 17 µg g -1 , 3.63 ± 0.56 µg g -1 , 87 ± 9 µg g -1 , 0.75 ± 0.28 µg g -1 , 4.40 ± 0.48 µg g -1 , 397 ± 87 µg g -1 , and 3.82 ± 1.77 µg g -1 , respectively. The distance-based redundancy analysis showed that the northern region was enriched with Na, Mn, Al, Fe, Zn, and Rb, while the southern region was enriched with Fe, Al, Ti, Cr, and Mg. The GIS mapping shows hot spots of Sc, Cr, Zn, and Cs were observed mostly in heavy traffic areas. Significant positive correlations of Fe-Sc, Al-Mg, V-Mg, V-Al, Cs-Rb, Cs-Sc, Rb-Sc, As-Na, and Cs-Rb invoked their inter-dependency and persistence in road dust. Depending on a set of environmental and ecological index-based calculation, the degree of metal(oid) pollution followed the descending order as W > Sb > Zn > Cr > As > Ti > Sc > V, while no pollution was recorded by Mn, Fe, Al, Rb, Cs, Co, and Ba. Importantly, the total hazard index values for adults and children were higher than unity, indicating potential non-carcinogenic health risks from exposure of road dust. Furthermore, the total carcinogenic risks from Cr and As through ingestion and dermal contact exceeded the standard guideline values. The implementation of different evaluation approaches strengthens the findings of metal(oid) source apportionment., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

In order to reduce the dust pollution caused by the coal mining process, a novel composite environmental dust suppressant for coal dust control was synthesized by corn straw, sodium carboxymethyl cellulose (CMC), and additives. This study focused on the preparation conditions of the dust suppressant, and the performances of which were investigated systematically. Response surface method (RSM) was used to optimize the raw material formulation and preparation parameters. The optimum mass ratio of straw, CMC, and alkali of the dust suppression was 65:20:15 (m/m), which was prepared under the conditions of the reaction time being 1.5 h and the rotation speed being 300 r/min. The pH of the dust suppressant was 8.0, and the state of which was suspension. Additives were benefited to enhance the suppressant performance, and the surface tension and the contact angle could decrease to 32.4 mN/m and 32.0°. The suppressant has a maximum viscosity of 363.6 mPa·s, and the compressive strength could be up to 200 kPa. The hygroscopic rate could reach more than 4%. The wind erosion resistance could be up to 99 % at the wind speed of 14 m/s. After spraying the dust suppressant, the gap between particles was filled with dust suppressant, and the adjacent particles were bound by strong mechanical action., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)