Search

Rice starch has been used in various agri-food products due to its hypoallergenic properties. However, rice starch has poor solubility, lower resistant starch content with reduced retrogradation and poor functional properties. Hence, its industrial applications are rather limited. The lack of comprehensive information and a holistic understanding of the interaction between rice starch and endo/exogenous constituents to improve physico-chemical properties is a prerequisite in designing industrial products with enhanced functional attributes. In this comprehensive review, we highlight the potentials of physically mixing of biopolymers in upgrading the functional characteristics of rice starch as a raw material for industrial applications. Specifically, this review tackles rice starch modifications by adding natural/synthetic polymers and plasticizers, leading to functional blends or composites in developing sustainable packaging materials, pharma- and nutraceutical products. Moreover, a brief discussion on rice starch chemical and genetic modifications to alter starch quality for the deployment of rice starch industrial application is also highlighted., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Polycaprolactone diol is the cornerstone, equipped with polyacrylonitrile and cellulose nanowhiskers (CNWs), of biocompatible and biodegradable polyurethanes (PUs). The solvent casting/particulate leaching technique was employed to contracting foam scaffolds with bimodal sizes from the combination of polyurethane/polyacrylonitrile/cellulose nanowhisker nanocomposites. Sugar and sodium chloride are components used as porogens to develop the leaching method and fabricate the 3D scaffolds. Incorporation of different percentages of cellulose nanowhisker leads to the various efficient structures with biodegradability and biocompatibility properties. All nanocomposites scaffolds, as revealed by MTT assay using mesenchymal stem cell (MSC) lines, were non-cytotoxic. PU/PAN/CNW foam scaffolds were used for osteogenic differentiation of human mesenchymal stem cells (hMSCs). Based on the results, PU/PAN/CNW nanocomposites could not only support osteogenic differentiation but can also enhance the proliferation of hMSCs in three-dimensional synthetic extracellular matrix.

The large-scale use of petrochemical-based plastics is damaging our environment. Discarded plastics are harmful to both marine and land animals, sometimes causing death when ingested. Biodegradable plastics have gained attentions from the public and the academia to reduce environmental burdens. Poly-3-hydroxybutyrate (PHB), the simplest and the best-studied bioplastic member of the polyhydroxyalkanoate (PHA) family synthesized by many bacteria, has been studied as a feed additive for large yellow croaker fish and weaned piglets. The fish grow faster and gain more weight when 1% and 2% PHB is added as a feed additive, accompanied by increased survival rates. Weaned piglets are found to grow normally and showed no significant change in average daily weight gains, average daily feed intakes, feed efficiency, and organ developments when 0.5% PHB is added to the feed. It can therefore be concluded that biodegradable and biocompatible PHB is not harmful as a feed additive for marine large yellow croakers and sensitive weaned piglets. PHB therefore holds great promise as a plastic that combines biodegradability and biocompatibility with good tolerability as a feed supplement for animals., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Biomass plastics are expected to contribute to the establishment of a carbon-neutral society by replacing conventional plastics derived from petroleum. The biomass-derived aromatic amine 4-aminocinnamic acid (4ACA) produced by recombinant bacteria is applied to the synthesis of high-performance biopolymers such as polyamides and polyimides. Here, we developed a microbial catalyst that hydrogenates the α,β-unsaturated carboxylic acid of 4ACA to generate 4-aminohydrocinnamic acid (4AHCA). The ability of 10 microbial genes for enoate and xenobiotic reductases expressed in Escherichia coli to convert 4ACA to 4AHCA was assessed. A strain producing 2-enoate reductase from Clostridium acetobutylicum (ca2ENR) reduced 4ACA to 4AHCA with a yield of > 95% mol mol -1 and reaction rates of 3.4 ± 0.4 and 4.4 ± 0.6 mM h -1  OD 600 -1 at the optimum pH of 7.0 under aerobic and anaerobic conditions, respectively. This recombinant strain reduced caffeic, cinnamic, coumaric, and 4-nitrocinnamic acids to their corresponding propanoic acid derivatives. We polycondensed 4AHCA generated from biomass-derived 4ACA by dehydration under a catalyst to form high-molecular-weight poly(4AHCA) with a molecular weight of M n  = 1.94 MDa. This polyamide had high thermal properties as indicated by a 10% reduction in weight at a temperature of T d10  = 394 °C and a glass transition temperature of T g  = 240 °C. Poly(4AHCA) derived from biomass is stable at high temperatures and could be applicable to the production of high-performance engineering plastics.

The usage of timed artificial insemination (TAI) at a low cost leading to better reproductive rates has been the aim of several research groups in the field. Usually during TAI protocols, sustained progesterone (P 4 ) release devices are employed. Most devices are constituted of a nylon skeleton covered with a silicon layer with P 4 . A device based on biopolymers was developed in order to reduce costs and decrease its environmental impact. In this study, we compared the kinetics of sustained progesterone release among devices manufactured with a polymeric blend made of polyhydroxybutyrate-valerate (PHBV) and poly-ε-caprolactone (PCL) (DISP) which were compared with DIB® (Internal Bovine Device) used as the control. In the in vitro and in vivo progesterone release tests, two types of biopolymer-based devices with a superficial area of 147 cm 2 were used: DISP8 (46% PHBV, 46% PCL and 8% P 4 ; n = 4), DISP10 (45% PHBV, 45% PCL, 10% P 4 ; n = 4) and DIB® (1 g P 4 , 120 cm 2 area; n = 3). The in vitro tests were carried out according to USP XXIII specifications and were performed in a dissolutor sink using an alcohol/water mixture (60/40 v/v) as a release media and samples were collected at 2 min, 2, 4, 8, 12, 24, 48, 60, 72, 84 and 96 h. P 4 concentrations were measured through spectrophotometry in a 244 nm long wave. Three to 3 comparisons of angular coefficients of the straight lines obtained by regression analysis of accumulated P 4 concentrations as a function of square root of time were carried out. Furthermore, the diffusion coefficient values of P 4 were also determined for DISP8 and DISP10. The results showed that the concentrations of P 4 were higher in the DISP10 (774.63 ± 45.26 μg/cm 2 /t 1 /2 ) compared to DISP8 (566.17 ± 3.68 μg/cm 2 /t 1 /2 ) (P < 0.05). However, both DISP10 and DISP8 P 4 concentrations did not differ from DIB® (677.39 ± 16.13 μg/cm 2 /t 1 /2 ). For the analysis of released quantities per day of the in vitro test, four periods were considered: 0-24, 24-48, 48-72 and 72-96 h. In the first 24 h, DISP8 released significantly less P 4 than DISP10 or DIB®, which did not differ among them. Between 24 and 48 h, DISP10 released significantly more P 4 than DIB®. DISP8 released an intermediate P 4 amount and did not differ significantly from DIB® or DISP10. Between 48 and 72 h, P 4 quantity released by DISP10 was significant higher (P < 0.01) than that of DIB® and DISP8, which did not differ among themselves. Between 72 and 96 h, DISP10 released significantly more P 4 than DIB®, and DISP8 released an intermediate amount which did not differ from DIB® or DISP10 (P < 0.01). There was interaction between treatment and time (P = 0.0024). The diffusion coefficient values were: 1.36 × 10 -8 (cm 2 /s) for DISP10 and 1.12 × 10 -8 (cm 2 /s) for DISP8. For the in vivo test, ovariectomized crossbred cows received DIB® (n = 4) or DISP8 (n = 8) in an alternate design with a non-balanced sequence (cross-over) added of measures repeated in time referring to 16 days of blood samples collection. Samples were analyzed through radioimmunoassay in solid phase using the commercial kit of DPC (Diagnostics Products Corporation). Plasma concentrations of P 4 concentrations above 1 ng/mL in the plasma of the cow during the 16 day in vivo test. In conclusion, devices manufactured with the blend of PHBV/PCL biopolymers can sustain the release of P 4 concentrations differed between DIB® (11.45 ± 1.96) compared with DISP8 (9.23 ± 1.15 ng/mL) (P = 0.027). On day 8, plasma P 4 concentrations were similar for DIB® (2.44 ± 0.09) and DISP8 (1.89 ± 0.13 ng/mL) (P = 0.58) showing that both devices were able to keep P 4 concentrations above 1 ng/mL in the plasma of the cow during the 16 day in vivo test. In conclusion, devices manufactured with the blend of PHBV/PCL biopolymers can sustain the release of P 4 in a similar manner as silicon., (© 2017 Japanese Society of Animal Science.)

The polyhydroxyalkanoate (PHA) copolymers consisting of short-chain-length (scl) and medium-chain-length (mcl) monomers have various properties ranging from stiff to flexible depending on the molar fraction of the monomer compositions. It has been reported that PhaG, which is first known as a (R)-3-hydroxyacyl-acyl carrier protein (ACP)-CoA transferase, actually functions as a 3-hydroxyacyl-ACP thioesterase, and the product of PP0763 gene from Pseudomonas putida KT2440 has a (R)-3-hydroxyacyl (3HA)-CoA ligase activity (Wang et al., Appl. Environ. Microbiol., 78, 519-527, 2012). In this study, we found a new (R)-3HA-CoA ligase (the product of PA3924 gene) from Pseudomonas aeruginosa PAO. The PA3924 gene was coexpressed with PHA synthase 1 gene (phaC1Ps) and phaGPs gene from Pseudomonas sp. 61-3, and β-ketothiolase gene (phbARe) and acetoacetyl-CoA reductase gene (phbBRe) from Ralstonia eutropha in Escherichia coli LS5218 at 25°C. As a result, the copolymer containing 94.6 mol% 3-hydroxybutyrate (3HB) and 5.4 mol% mcl-3-hydroxyalkanoates (3HA) consisting of C8, C10, C12 and C14 was synthesized by recombinant E. coli LS5218 from glucose as the sole carbon source. The concentration of P(3HB-co-3HA) (scl-co-mcl-PHA) synthesized by the recombinant E. coli LS5218 harboring phaC1Ps, phaGPs, phbABRe and the PA3924 genes was approximately 7-fold higher than that of the recombinant LS5218 harboring phaC1Ps, phaGPs, phbABRe and the PP0763 genes. The number-average molecular weight of the P(3HB-co-5.4% 3HA) copolymer was 233 × 10(3), which was relatively high molecular weight. In addition, the physical and the mechanical properties of the copolymer were demonstrated to improve the brittleness of P(3HB) homopolymer., (Copyright © 2015 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.)