Search

During the past two decades, a number of two-terminal switching devices have been demonstrated in the literature. They typically exhibit hysteric behavior in the current-to-voltage characteristics. These devices have often been also referred to as memristive devices. Their capacity to switch and exhibit electrical hysteresis has made them well-suited for applications such as data storage, in-memory computing, and in-sensor computing or in-memory sensing. The aim of this perspective paper is to is twofold. Firstly, it seeks to provide a comprehensive examination of the existing research findings in the field and engage in a critical discussion regarding the potential for the development of new non-Von-Neumann computing machines that can seamlessly integrate sensing and computing within memory units. Secondly, this paper aims to demonstrate the practical application of such an innovative approach in the realm of cancer medicine. Specifically, it explores the modern concept of employing multiple cancer markers simultaneously to enhance the efficiency of diagnostic processes in cancer medicine.

This paper addresses two key challenges toward an integrated forward error-correcting biosensor based on our previously reported self-assembled quick-response (QR) code. The first challenge involves the choice of the paper substrate for printing and self-assembling the QR code. We have compared four different substrates that includes regular printing paper, Whatman filter paper, nitrocellulose membrane and lab synthesized bacterial cellulose. We report that out of the four substrates bacterial cellulose outperforms the others in terms of probe (gold nanorods) and ink retention capability. The second challenge involves remote activation of the analyte sampling and the QR code self-assembly process. In this paper, we use light as a trigger signal and a graphite layer as a light-absorbing material. The resulting change in temperature due to infrared absorption leads to a temperature gradient that then exerts a diffusive force driving the analyte toward the regions of self-assembly. The working principle has been verified in this paper using assembled biosensor prototypes where we demonstrate higher sample flow rate due to light induced thermal gradients.

This paper extends our previous work on silver-enhancement based self-assembling structures for designing reliable, self-powered biosensors with forward error correcting (FEC) capability. At the core of the proposed approach is the integration of paper-based microfluidics with quick response (QR) codes that can be optically scanned using a smart-phone. The scanned information is first decoded to obtain the location of a web-server which further processes the self-assembled QR image to determine the concentration of target analytes. The integration substrate for the proposed FEC biosensor is polyethylene and the patterning of the QR code on the substrate has been achieved using a combination of low-cost ink-jet printing and a regular ballpoint dispensing pen. A paper-based microfluidics channel has been integrated underneath the substrate for acquiring, mixing and flowing the sample to areas on the substrate where different parts of the code can self-assemble in presence of immobilized gold nanorods. In this paper we demonstrate the proof-of-concept detection using prototypes of QR encoded FEC biosensors.

This paper presents a wireless, self-powered, affinity-based biosensor based on the integration of paper-based microfluidics with our previously reported method for self-assembling radio-frequency (RF) antennas. At the core of the proposed approach is a silver-enhancement technique that grows portions of a RF antenna in regions where target antigens hybridize with target specific affinity probes. The hybridization regions are defined by a network of nitrocellulose based microfluidic channels which implement a self-powered approach to sample the reagent and control its flow and mixing. The integration substrate for the biosensor has been constructed using polyethylene and the patterning of the antenna on the substrate has been achieved using a low-cost ink-jet printing technique. The substrate has been integrated with passive radio-frequency identification (RFID) tags to demonstrate that the resulting sensor-tag can be used for continuous monitoring in a food supply-chain where direct measurement of analytes is typically considered to be impractical. We validate the proof-of-concept operation of the proposed sensor-tag using IgG as a model analyte and using a 915 MHz Ultra-high-frequency (UHF) RFID tagging technology.

Sensitivity is an essential consideration for microfluidic paper-based analytical devices (μPADs) when these devices are used for low concentration sample detection. Very recently, ion concentration polarization (ICP)-based μPADs are emerging as novel tools for bio-sample preconcentration. In this study, we develop an enclosed paper-based microfluidic platform as a preconcentrator based on the ICP effect. This paper chip is fabricated by a Parafilm embedding technique and holds many advantages over traditional open-channel μPADs, which usually suffer from sample contamination and evaporation problems. The enclosed structure minimizes sample evaporation, reduces contamination risk, and increases the mechanical strength of the paper channel. The experiment results show that more than 100-fold concentration enhancement can be achieved in the enclosed paper device, which is comparable with most reported paper-based ICP devices. Additionally, other improved ICP performance has been observed on the enclosed device, including better concentration plug profile, increased concentration durability.

Timely diagnosis of mild traumatic brain injury (mTBI) remains challenging due to the rapid recovery of acute symptoms and the absence of evidence of injury in static neuroimaging scans. Furthermore, while longitudinal tracking of mTBI is essential in understanding how the diseases progresses/regresses over time for enhancing personalized patient care, a standardized approach for this purpose is not yet available. Recent functional neuroimaging studies have provided evidence of brain function alterations following mTBI, suggesting mTBI-detection models can be built based on these changes. Most of these models, however, rely on manual feature engineering, but the optimal set of features for detecting mTBI may be unknown. Data-driven approaches, on the other hand, may uncover hidden relationships in an automated manner, making them suitable for the problem of mTBI detection. This paper presents a data-driven framework based on Siamese Convolutional Neural Network (SCNN) to detect mTBI and to monitor the recovery state from mTBI over time. The proposed framework is tested on the cortical images of Thy1-GCaMP6s mice, obtained via widefield calcium imaging, acquired in a longitudinal study. Results show that the proposed model achieves a classification accuracy of 96.5%. To track the state of the injured brain over time, a reference distance map is constructed, which together with the SCNN model, are employed to assess the recovery state in subsequent sessions after injury, revealing that the recovery progress varies among subjects. The promising results of this work suggest that a similar approach could be potentially applicable for monitoring recovery from mTBI, in humans.

This paper presents a high-precision CMOS fluorescence photometry sensor using a novel lock-in amplification scheme based on switched-biasing and ping-pong auto-zeroing techniques. The CMOS sensor includes two photodiodes and a lock-in amplifier (LIA) operating at 1 kHz. The LIA comprises a differential low-noise amplifier using a novel switched-biasing ping-pong auto-zeroed scheme, an automatic phase aligner, a programmable gain amplifier, a band-pass filter, a mixer, and an output low-pass filter. The design is fabricated in 0.18-μm CMOS process, and the measurement shows that the LIA can retrieve noisy input signals with a dynamic reserve of 42 dB, while consuming only 0.7 mW from a 1.8 V supply voltage. The measured results show that the LIA can detect a wide range of incident light power from 8 nW to 24 μW. The proposed design is encapsulated in a 3D-printed housing allowing for real-time in vitro biomarker detection. This ambulatory platform uses an LED and a fiber optic to convey the excitation light to the sample and retrieve the fluorescence signal. Experiments with a beads solution diluted in PBS demonstrate that the sensor has a sensitivity of 1:100 k. Experimental results obtained in vitro with NIH3T3 mouse cells tagged with membrane dye show the ability of the prototype to detect different densities of cell culture. The portable prototype, which includes optical filters and a small 30 mm × 36 mm × 30 mm printed circuit board enclosed inside the 3D-printed housing, consumes 36.7 mW and weighs 120 g.

Most operant conditioning circuits predominantly focus on simple feedback process, few studies consider the intricacies of feedback outcomes and the uncertainty of feedback time. This paper proposes a neuromorphic circuit based on operant conditioning with addictiveness and time memory for automatic learning. The circuit is mainly composed of hunger output module, neuron module, excitement output module, memristor-based decision module, and memory and feedback generation module. In the circuit, the process of output excitement and addiction in stochastic feedback is achieved. The memory of interval between the two rewards is formed. The circuit can adapt to complex scenarios with these functions. In addition, hunger and satiety are introduced to realize the interaction between biological behavior and exploration desire, which enables the circuit to continuously reshape its memories and actions. The process of operant conditioning theory for automatic learning is accomplished. The study of operant conditioning can serve as a reference for more intelligent brain-inspired neural systems.

This paper presents an electronic skin (e-skin) taxel array readout chip in 0.18μm CMOS technology, achieving the highest reported spatial resolution of 200μm, comparable to human fingertips. A key innovation is the integration on chip of a 12×16 polyvinylidene fluoride (PVDF)-based piezoelectric sensor array with per-taxel signal conditioning frontend and spiking readout combined with local embedded neuromorphic first-order processing through Complex Receptive Fields (CRFs). Experimental results show that Spiking Neural Network (SNN)-based classification of the chip's spatiotemporal spiking output for input tactile stimuli such as texture and flutter frequency achieves excellent accuracies up to 97.1% and 99.2%, respectively. SNN-based classification of the indentation period applied to the on-chip PVDF sensors achieved 95.5% classification accuracy, despite using only a small 256-neuron SNN classifier, a low equivalent spike encoding resolution of 3-5 bits, and a sub-Nyquist 2.2kevent/s population spiking rate, a state-of-the-art power consumption of 12.33nW per-taxel, and 75μW-5mW for the entire chip is obtained. Finally, a comparison of the texture classification accuracies between two on-chip spike encoder outputs shows that the proposed neuromorphic level-crossing sampling (NLCS) architecture with a decaying threshold outperforms the conventional bipolar level-crossing sampling (LCS) architecture with fixed threshold.

This paper presents a compact and low-cost on-chip sensor and readout circuit. The sensor achieves high-resolution 5-degrees-of-freedom (DoF) tracking (x, y, z, yaw, and pitch). With the help of an external wire wound sensor, it can also achieve high-resolution 6-degrees-of-freedom (DoF) tracking (x, y, z, yaw, pitch, and roll angles). The sensor uses low-frequency magnetic fields to detect the position and orientation of instruments, providing a viable alternative to using X-rays in image-guided surgery. To measure the local magnetic field, a highly miniaturised on-chip magnetic sensor capable of sensing the magnetic field has been developed incorporating an on-chip magnetic sensor coil, analog-front end, continuous-time ΔΣ analog-to-digital converter (ADC), LVDS transmitter, bandgap reference, and voltage regulator. The microchip is fabricated using 65 nm CMOS technology and occupies an area of 1.06 mm2, the smallest reported among similar designs to the best of our knowledge. The 5-DoF system accurately navigates with a precision of 1.1 mm within the volume-of-intrest (VOI) of 15×15×15 cm 3 . The 6-DoF system achieves a navigation accuracy of 0.8 mm and an angular error of 1.1 degrees in the same VOI. These results were obtained at a 20 Hz update rate in benchtop characterisation. The prototype sensor demonstrates accurate position tracking in real-life pre-clinical in-vivo settings within the porcine lung of a live swine, achieving a reported worst-case registration accuracy of 5.8 mm.

To avoid unexpected failures of units in manufacturing systems, failure mode recognition and prognostics are critically important in prognostics health management (PHM). Most existing methods either ignored the effects of various failure modes on remaining useful lifetime (RUL) prediction or implemented failure mode recognition and RUL prediction as two independent tasks, which failed to exploit failure mode information to obtain accurate RUL prediction. In fact, RUL highly depends on failure modes because sensor signals under different failure modes usually present different degradation patterns. To address the issue, this paper proposes a joint learning model of failure mode recognition and RUL prediction for degradation processes based on multiple sensor signals. The proposed joint learning model first extracts features by considering the degradation mechanism to ensure good interpretability for degradation modeling, and then takes the extracted features as inputs to a deep neural network. By conducting failure mode recognition and RUL prediction as a collaborative task, the proposed model can fully characterize the complex relationship among the extracted features, RUL and failure modes, and outputs the recognized failure modes and the predicted RUL of units simultaneously. A case study on the degradation of aircraft gas turbine engines is presented to evaluate the proposed model performance., Note to Practitioners—: The paper aims to develop a joint learning method for failure mode recognition and RUL prediction of operating units. Specifically, the developed method addresses a challenging issue in practice, i.e., how to effectively conduct failure mode recognition and RUL prediction as a joint task based on interpretable extracted degradation features from multiple sensor signals. To implement this method in practice, four steps are included as follows: First , collect multiple sensor signals, failure time, and failure modes of historical units. Second , construct the joint learning model based on features extracted from sensor signals by considering the degradation mechanism. Third , estimate model parameters using the data of historical units. Fourth , recognize the failure mode and predict the RUL of an in-service unit. Since the proposed method is a data-driven neural network with flexible model structure that considers complex data relationships, it is expected to be applicable to many practical situations and use cases, especially for manufacturing systems with complex structures and unknown failure thresholds.

The study of neuron interactions and hardware implementations are crucial research directions in neuroscience, particularly in developing large-scale biological neural networks. The FitzHugh-Nagumo (FHN) model is a popular neuron model with highly biological plausibility, but its complexity makes it difficult to apply at scale. This paper presents a cost-saving and improved precision approximation algorithm for the digital implementation of the FHN model. By converting the computational data into floating-point numbers, the original multiplication calculations are replaced by adding the floating-point exponent part and fitting the mantissa part with piecewise linear. In the hardware implementation, shifters and adders are used, greatly reducing resource overhead. Implementing FHN neurons by this approximation calculations on FPGA reduces the normalized root mean square error (RMSE) to 3.5% of the state-of-the-art (SOTA) while maintaining a performance overhead ratio improvement of 1.09 times. Compared to implementations based on approximate multipliers, the proposed method achieves a 20% reduction in error at the cost of a 2.8% increase in overhead.This model gained additional biological properties compared to LIF while reducing the deployment scale by only 9%. Furthermore, the hardware implementation of nine coupled circular networks with eight nodes and directional diffusion was carried out to demonstrate the algorithm's effectiveness on neural networks. The error decreased to 60% compared to the single neuron of the SOTA. This hardware-friendly algorithm allows for the low-cost implementation of high-precision hardware simulation, providing a novel perspective for studying large-scale, biologically plausible neural networks.

Brain-machine interfaces (BMI) are widely adopted in neuroscience investigations and neural prosthetics, with sensing channel counts constantly increasing. These Investigations place increasing demands for high data rates and low-power implantable devices despite high tissue losses. The Impulse radio ultra-wideband (IR-UWB), a revived wireless technology for short-range radios, has been widely used in various applications. Since the requirements and solutions are application-oriented, in this review paper we focus on neural recording implants with high-data rates and ultra-low power requirements. We examine in detail the working principle, design methodology, performance, and implementations of different architectures of IR-UWB transceivers in a quantitative manner to draw a deep comparison and extract the bottlenecks and possible solutions concerning the dedicated application. Our analysis shows that current solutions rely on enhanced or combined modulation techniques to improve link margin. An in-depth study of prior-art publications that achieved Gbps data rates concludes that edge-combination architecture and non-coherent detectors are remarkable for transmitter and receiver, respectively. Although the aim to minimize power and improve data rate - defined as energy efficiency (pJ/b) - extending communication distance despite high tissue losses and limited power budget, good narrow-band interference (NBI) tolerance coexisted in the same frequency band of UWB systems, and compatibility with energy harvesting designs are among the critical challenges remained unsolved. Furthermore, we expect that the combination of artificial intelligence (AI) and the inherent advantages of UWB radios will pave the way for future improvements in BMIs.

This paper presents an energy-efficient wireless power receiver for implantable electrical stimulation applications, which can achieve one-step adiabatic bipolar-supply that is generated by a hybrid single-stage dual-output regulating (SSDOR) rectifiers. The structure using only four switches overcomes the disadvantages that the two output voltage values in the traditional dual-output rectifiers are close to each other. A constant-current (CC) controlled adiabatic dynamic voltage scaling (DVS) technique is proposed to minimize the voltage headroom of the stimulating drivers and improve the stimulation efficiency significantly. In addition, the receiver adopts only one general constant on-time (COT) low-frequency control to adjust the stimulation current, reducing both the power consumption and the complexity of the control circuits. The proposed receiver has been fabricated in a 0.18 μm BCD process with ±6 V voltage compliance and 2.5 mA maximum stimulating current. With a current range from ±1.5 mA to ±2.5 mA, the measured maximum average headroom voltage is only 80 mV and the peak total efficiency of the receiver is 85.6%. The functionalities of the proposed receiver have been successfully verified through in vitro experiments.

Intracortical brain-computer interfaces offer superior spatial and temporal resolutions, but face challenges as the increasing number of recording channels introduces high amounts of data to be transferred. This requires power-hungry data serialization and telemetry, leading to potential tissue damage risks. To address this challenge, this paper introduces an event-based neural compressive telemetry (NCT) consisting of 8 channel-rotating Δ-ADCs, an event-driven serializer supporting a proposed ternary address event representation protocol, and an event-based LVDS driver. Leveraging a high sparsity of extracellular spikes and high spatial correlation of the high-density recordings, the proposed NCT achieves a compression ratio of >11.4×, while consumes only 1 μW per channel, which is 127× more efficient than state of the art. The NCT well preserves the spike waveform fidelity, and has a low normalized RMS error <23% even with a spike amplitude down to only 31 μV.