Search

To meet the carbon-neutral goal in 2050, an accelerated transition of decarbonization is needed in the iron and steel industry. Lots of decarbonization path models are recently being used to analyze the technology pathways, industrial structure adjustments, and short- or long-term policies for greenhouse gas emission reduction. Thus, systematic insight is required for better making sense of the status quo and differences in low-carbon transition pathways at different levels. This paper reviews the carbon emission reduction of steel production routes and summarizes the decarbonization models from micro-, meso-, and macro-level perspectives, respectively. First, we systematically analyze the capacity and potential of both available and emerging technologies in the iron and steel production process. Additionally, we conduct a theoretical analysis of the bottom-up models currently used as effective tools to assess decarbonization technology pathways. Subsequently, pathways and models in terms of industrial synergy are elaborated. Policy guidance and market support are explored to overcome the challenges of collaborative carbon reduction faced by global steel producers. The characteristics of top-down models for supporting carbon reduction are also discussed. Finally, gaps in the literature and future research agendas are identified. Advancing this research could enrich discussions on steel industry decarbonization and provide clearer assessments of modeling approaches. The results indicate that existing energy-saving technologies in the iron and steel industry have limited carbon reduction capacity. Significant reduction requires coordinated efforts with upstream and downstream industries, particularly in hydrogen and power sectors, along with financial support and favorable policies., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

As a byproduct of steelmaking, steel slag occupies significant land resources and poses potential environmental and safety challenges due to its extensive accumulation. Recently, steel slag has shown promising applications in the field of concrete. However, considering the complexity of the plateau environment, the utilization of steel slag is relatively lacking, and its low reactivity and poor volume stability remain the main factors restricting its application in plateau concrete. This paper reviews the research status of steel slag activation techniques for concrete, including wet grinding, chemi-excitation, high-temperature activation, and carbonation treatment. The effects of different treatment techniques on the mechanical and durability properties of concrete and the potential issues are discussed. Although different modification methods can improve the activity and volume stability of steel slag to varying degrees, a single modification technology is difficult to achieve the high-quality utilization of steel slag in concrete on the plateau. Based on this, a steel slag grading grinding-magnetic separation utilization technique suitable for high-altitude areas is proposed, which is beneficial for improving the added value and utilization rate of steel slag in concrete., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Electric arc furnace (EAF) slag is a coproduct of steel production used primarily for construction purposes. Some applications of EAF slag result in residential exposures by incidental ingestion and inhalation of airborne dust. To evaluate potential health risks, an EAF slag characterization program was conducted to measure concentrations of metals and leaching potential (including oral bioaccessibility) in 38 EAF slag samples. Arsenic, hexavalent chromium, iron, vanadium, and manganese (Mn) were identified as constituents of interest (COIs). Using a probabilistic risk assessment (PRA) approach, estimated distributions of dose for COIs were assessed, and increased cancer risks and noncancer hazard quotients (HQs) at the 50th and 95th percentiles were calculated. For the residents near slag-covered roads, cancer risk and noncancer HQs were <1E - 6 and 1, respectively. For residential driveway or landscape exposure, at the 95th percentile, cancer risks were 1E - 6 and 7E - 07 based on oral exposure to arsenic and hexavalent chromium, respectively. HQs ranged from 0.07 to 2 with the upper bound due to ingestion of Mn among children. To expand the analysis, a previously published physiologically based pharmacokinetic (PBPK) model was used to estimate Mn levels in the globus pallidus for both exposure scenarios and further evaluate the potential for Mn neurotoxicity. The PBPK model estimated slightly increased Mn in the globus pallidus at the 95th percentile of exposure, but concentrations did not exceed no-observed-adverse-effect levels for neurological effects. Overall, the assessment found that the application of EAF slag in residential areas is unlikely to pose a health hazard or increased cancer risk., (© 2024 The Authors. Risk Analysis published by Wiley Periodicals LLC on behalf of Society for Risk Analysis.)

Industrial residue application to soil was investigated by integrating granulated blast furnace or converter steel slag with residues from the pulp and paper industry in various formulations. Specimen analysis included relevant physicochemical properties, total element concentrations (HCl+HNO3 digestion, USEPA 3051) and chemical speciation of chosen heavy metals (CH3COOH, NH2OH·HCl and H2O2+H2O2+CH3COONH4, the BCR method). Produced matrices showed liming effects comparable to commercial ground limestone and included significant quantities of soluble vital nutrients. The use of converter steel slag, however, led to significant increases in the total concentrations of Cr and V. Subsequently, total Cr was attested to occur as Cr(III) by Na2CO3+NaOH digestion followed by IC UV/VIS-PCR (USEPA 3060A). Additionally, 80.6% of the total concentration of Cr (370 mg kg(-1), d.w.) occurred in the residual fraction. However, 46.0% of the total concentration of V (2470 mg kg(-1), d.w.) occurred in the easily reduced fraction indicating potential bioavailability., (Copyright © 2011 Elsevier B.V. All rights reserved.)

The steel industry, crucial to the global economy, grapples with critical sustainable challenges, including high energy consumption, greenhouse gas emissions, and non-renewable resource utilization, making sustainability imperative for upholding its economic role without compromising the planet or societal well-being. This study proposes a framework aimed at advancing sustainability in the steel industry through the articulation of the triple helix sectors (university, industry, and government). Based on the integrative review scientific method, systematic selection, interpretation, and synthesis of information from various sources were carried out to map a technical-scientific scenario of sustainability in the steel industry. This scenario informed benchmarking which, in light of the scientific theory and the authors' expertise, enabled the proposition of customized actions aimed at the triple helix actors. The main theoretical-scientific contribution lies in deepening and expanding the knowledge that connects sustainability to the steel industry, thus reinforcing the basis for future research and empirical studies. As for the managerial-applied contribution, this work can guide universities in developing sustainable projects and establishing industrial partnerships; steel companies benefit from the best practices and technologies, while also achieving regulatory compliance; and governments can promote public policies that boost sustainability in the steel sector., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Indirect carbonation of steel slag is an effective method for CO 2 storage, reducing emissions, and promoting cleaner production in the steel industry. However, challenges remain, such as low Ca 2+ leaching rates and slag management complexities arising from variations in mineral compositions. To address this, a high-temperature modification process is proposed to alter the mineral composition and facilitate the synergistic utilization of calcium and iron. This study delves into the effects of various solid waste modifications on the leaching of Ca 2+ and the total iron content within steel slag. Results show that high-basicity modified slag forms Ca 2 (Al, Fe) 2 O 5 , reducing calcium leaching. Low-alkalinity modified slag produces calcium-rich aluminum minerals and also reduces the leaching of Ca 2+ ions. At a basicity of 2.5, coal gangue, fly ash, and blast slag achieve maximum Ca 2+ leaching rates of 88.93%, 89.46%, and 90.17%, respectively, with corresponding total iron contents of 41.46%, 37.72%, and 35.29%. Upgraded coal gangue exhibits a 50.02% increase in calcium leaching and a 15.58% increase in total iron content compared to the original slag. This enhances CO 2 fixation and iron resource utilization. Overall, the proposed indirect carbonation and iron enrichment modification offer a novel approach for the resource utilization and environmental stability of steel slag., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Microbiologically influenced corrosion (MIC) behavior of the AISI 1020 carbon steel caused by consortia of nitrate-reducing prokaryotes (NRP) and sulfate-reducing prokaryotes (SRP) was investigated separately in hypersaline seawater conditions. Microbiological analysis, surface images, characterization of corrosion products, weight loss, and electrochemical measurements were employed to monitor the corrosion process for 10 days at 40 °C. Compared to abiotic corrosion (control), the extent of corrosion was more aggravated in the conditions with microbial consortia. It corroborates the critical role of microbial activity in corrosion processes in natural and industrial environments since microorganisms are widely spread. Corrosion rates obtained from Tafel extrapolation were statically equal for both microbial consortia (0.093 ± 0.009 mm.y -1 ); however, the maximum pit depth on the steel surface subjected to NRP-MIC was about 25% deeper (48.5 µm) than that caused by SRP-MIC (32.6 µm). In contrast, SRP activity almost doubled the number of pits on the steel surface (2.7 × 10 4  ± 4.1 × 10 3 pits.m -2 ), resulting in more weight loss than NRP activity. In addition, SRP cells formed nanowires to support direct electron uptake from steel oxidation. This research contributes to the understanding of steel corrosion mechanisms in hypersaline environments with the prevalence of NRP or SRP, as oil reservoirs undergo nitrate injection treatments., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

In lubricated tribo-contacts, hydrogen ingress in steel is possible due to chemical reactions of lubricant components like base oils or additives, and/or contamination upon service particularly water, and/or corrosion processes, and/or electrostatic fields or current flow. Absorbed by the metal, atomic hydrogen may cause serious deleterious effects on the physical-chemical and mechanical properties, reducing the material's ability to withstand the design loads. The present research work is focused on analyzing the influence of electric field on lubricating oils in contact with steel surface. In order to evaluate the possibility of atomic hydrogen generation and permeation into the steel under cathodic polarization of lubricating oils the electrochemical permeation technique developed by Devanathan and Stachurski is used. The input cell of a Devanathan-Stachurski set up is appropriately modified by realizing a very close distance between the working electrode (steel membrane) and a Pt counter electrode with the oil between. This significantly increases the sensibility of the set up and allows the application of larger voltage and higher temperature to enable hydrogen generation from lubricating oils. The complex effects of cathodic polarization, temperature, additives and presence of water in model lubricating oils on atomic hydrogen permeation into steel is discussed., (© 2022. The Author(s).)

Superhydrophobic coatings were successfully fabricated on steel substrates using potentiostatic electrodeposition of Ni and Ni-graphene, Ni-G, coatings followed by immersion in an ethanolic solution of stearic acid, SA. Rice straw, an environmentally friendly biomass resource, was used to synthesize high-quality graphene. The Raman spectra proved the high quality of the produced graphene. The Fourier transform infrared spectroscopy, FTIR, results showed that the Ni coating grafted with stearic acid, Ni-SA, and the Ni-G composite grafted with stearic acid, Ni-G-SA, were successfully deposited on the steel substrate. The scanning electron microscope, SEM, results showed that the prepared superhydrophobic coatings exhibit micro-nano structures. The wettability results revealed that the values of contact angles, CAs, for Ni-SA and Ni-G-SA coatings are 155.7° and 161.4°, while the values of sliding angles, SAs, for both coatings are 4.0° and 1.0°, respectively. The corrosion resistance, chemical stability, and mechanical abrasion resistance of the Ni-G-SA coating were found to be greater than those of the Ni-SA coating., (© 2022. This is a U.S. Government work and not under copyright protection in the US; foreign copyright protection may apply.)

To accomplish China's sustainable growth, it is critical to identify the primary factors affecting environmental quality in the steel industry. In this positioning, foreign direct investment (FDI), energy intensity, and technological innovation have emerged as strong pillars of the steel industry. However, there are growing concerns of carbon emission from this industry which is still debatable. In this context, this study measures the effect of FDI, energy intensity, and technology innovation on environmental quality in the steel industry from 28 provinces of China. The study uses the provincial data for China over the period 2000-2018. In addition to examining unit root properties and cointegration, this study employed Augmented Mean Group regression for estimating long-run relationships among study variables. The findings reveal the negative effect of FDI and technology innovation on environmental quality. These findings indicate that FDI and technology innovation have shaped the energy intensity in the steel industry. The positive coefficient value of energy intensity shows that innovations for environmental conservation and energy usage are minimal and did not perform an integral part in lowering carbon emissions. These findings are important in formulating successful emission reduction policies after controlling the effects of urbanization and economic growth for the Chinese steel sector., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Microbiologically influenced corrosion (MIC), or microbial biocorrosion, is caused directly by microbial metabolic activities/products or induced by microbial biofilm's damage of a protective film that exposes a solid surface to a pre-existing corrosive environment. MIC causes billions of dollars of losses in various industrial processes, especially in oil and gas and water utilities. The mitigation of problematic industrial microbes typically relies on biocides whose discharges can cause environmental problems. Thus, more effective biocide applications are desired to minimize environmental impact. D-Limonene, a citrus peel oil, generally regarded as safe (GRAS), was used to enhance the popular biodegradable tetrakis hydroxymethyl phosphonium sulfate (THPS) biocide. An oilfield mixed-culture biofilm was grown anaerobically in enriched artificial seawater containing C1018 carbon steel coupons for 7 days at 37 °C. One hundred ppm (w/w) D-limonene reduced general heterotrophic bacteria (GHB) and acid-producing bacteria (APB) effectively, leading to 5.4-log and 6.0-log reductions in sessile GHB and APB cell counts, respectively, compared to no treatment control. The combination of 100 ppm D-limonene + 100 ppm THPS achieved extra 1.0-log SRB, 0.6-log GHB and 0.5-log APB reductions in sessile cell counts, which led to extra 58% reduction in microbial corrosion mass loss (1.2 vs. 0.5 mg/cm 2 ) and extra 30% reductions in maximum pit depth (11.5 vs. 8.1 µm), compared to 100 ppm THPS-only treatment. Linear polarization resistance and potentiodynamic polarization (PDP) corrosion data supported mass loss and pitting data. Mixed-culture biofilms on carbon steel coupons after 7 day incubation at 37 °C showing enhanced biocide treatment outcome using D-limonene + THPS: A no treatment, B 100 ppm D-limonene, C 100 ppm THPS, D 100 ppm D-limonene + 100 ppm THPS., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Anaerobic microbiologically influenced corrosion (MIC) of Fe (0) metals causes great harm to the environment and economy, which depends on the key electron transfer process between anaerobic microorganisms and Fe (0) metals. However, the key electron transfer process in microbiota dominating MIC remains unclear, especially for methanogenic microbiota wildly distributed in the environment. Herein, three different methanogenic microbiota (Methanothrix, Methanospirillum, and Methanobacterium) were acclimated to systematically investigate electron transfer pathways on corroding Q235A steel coupons. Results indicated that microbiota dominated by Methanothrix, Methanospirillum, or Methanobacterium accelerated the steel corrosion mainly through direct electron transfer (DET) pathway, H 2 mediated electron transfer (HMET) pathway, and combined DET and HMET pathways, respectively. Compared with Methanospirillum dominant microbiota, Methanothrix or Methanobacterium dominant microbiota caused more methane production, higher weight loss, corrosion pits with larger areas, higher corrosion depth, and smaller corrosion pits density. Such results reflected that the DET process between microbiota and Fe (0) metals decided the biocorrosion degree and behavior of Fe (0) metals. This study insightfully elucidates the mechanisms of methanogenic microbiota on corroding steels, in turn providing new insights for anti-corrosion motives., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

The industrial and medical sectors have a great interest in chitosan due to its unique properties, such as abundance, renewability, non-toxicity, antibacterial activity, biodegradability, and polyfunctionality. In this work, two modified chitosan Schiff bases (ChSB-1 and ChSB-2) were made using condensation methods, and their potential as corrosion inhibitor for carbon steel in 1 M HCl was investigated using chemical and electrochemical techniques. The ChSB-1 and ChSB-2 inhibitors exhibited remarkable inhibitory performance, as evidenced by the mass loss data, which showed 89.3 % and 91.5 % efficacy at 1 mM concentration, respectively. Because of the electron-donor substituent of methoxy (-OCH 3 ), ChSB-2's active sites have more delocalized electrons than ChSB-1's. The PDP results showed that both ChSB-1 and ChSB-2 inhibitors have anti-corrosion characteristics because heteroatoms caused a protective layer to develop that functioned as mixed-typed inhibitors. The calculated adsorption-free energy ∆G ads o . The ChSB-1 and ChSB-2 inhibitors adsorb on carbon steel in acidic conditions through physisorption and chemisorption interactions, and their adsorption is in line with the Langmuir adsorption model. Inhibited and uninhibited metallic surfaces were subjected to surface morphological assessments using contact angle (CA), the scanning electron microscopy and the energy dispersive X-ray (SEM/EDX) analysis. The DMol -1 . The ChSB-1 and ChSB-2 inhibitors adsorb on carbon steel in acidic conditions through physisorption and chemisorption interactions, and their adsorption is in line with the Langmuir adsorption model. Inhibited and uninhibited metallic surfaces were subjected to surface morphological assessments using contact angle (CA), the scanning electron microscopy and the energy dispersive X-ray (SEM/EDX) analysis. The DMol 3 part of Materials Studio 7.0 software was used to perform the quantum chemical calculations based on DFT to visualize the structural features. Studies from quantum chemistry suggest the possibility of surface interaction between the unoccupied orbitals of the metal surface and the inhibitors ChSB-1, ChSB-2, ChSB-1H + . The results clearly show that the two inhibitors work well as environmentally friendly carbon steel corrosion inhibitors in acidic medium. This could be advantageous for industrial procedures such as pickling, cleaning, acidizing oil drilling in oil wells, and using citrus to de-sediment boilers.+ . The results clearly show that the two inhibitors work well as environmentally friendly carbon steel corrosion inhibitors in acidic medium. This could be advantageous for industrial procedures such as pickling, cleaning, acidizing oil drilling in oil wells, and using citrus to de-sediment boilers., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Chitosan grafted with gallic acid (CS-GA), along with CS-GA doped with CeO 2 nanoparticles (CS-GA-CeO 2 ) were synthesized as novel environmentally friendly mild steel corrosion inhibitors. The formation of these derivatives was confirmed by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), hydrogen nuclear magnetic resonance spectroscopy ( 1 H NMR), and thermal analysis (TGA). Based on potentiodynamic polarization curves (PDP) measurements, the inhibitors acted primarily as hybrid inhibitors, while following the Langmuir adsorption theory model. Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy(XPS) and 3D surface profiles, confirmed that CS-GA-CeO 2 adsorbed on the mild steel forming a protective layer thus preventing the invasion of corrosive media. The corrosion protection mechanism of chitosan derivatives was investigated by molecular dynamics simulations. Electrochemical measurements were used to investigate the corrosion inhibition by CS-GA and CS-GA-CeO 2 on mild steel in a 3.5 % NaCl solution. At room temperature, the highest inhibition efficiency (93.58 %) was achieved at 200 ppm CS-GA-CeO 2 . Modified chitosan nanocomposites were confirmed as promising corrosion inhibitors., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Carbon steel microbiologically influenced corrosion (MIC) by sulfate reducing bacteria (SRB) is known to occur via extracellular electron transfer (EET). A higher biofilm sessile cell count leads to more electrons being harvested for sulfate reduction by SRB in energy production. Metal surface roughness can impact the severity of MIC by SRB because of varied biofilm attachment. C1018 carbon steel coupons (1.2 cm 2 top working surface) polished to 36 grit (4.06 μm roughness which is relatively rough) and 600 grit (0.13 μm) were incubated in enriched artificial seawater inoculated with highly corrosive Desulfovibrio ferrophilus IS5 at 28 ℃ for 7 d and 30 d. It was found that after 7 d of SRB incubation, 36 grit coupons had a 11% higher sessile cell count at (2.0 ± 0.17) × 10 8  cells/cm 2 , 52% higher weight loss at 22.4 ± 5.9 mg/cm 2 (1.48 ± 0.39 mm/a uniform corrosion rate), and 18% higher maximum pit depth at 53 μm compared with 600 grit coupons. However, after 30 d, the differences diminished. Electrochemical tests with transient information supported the weight loss data trends. This work suggests that a rougher surface facilitates initial biofilm establishment but provides no long-term advantage for increased biofilm growth., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Desiccation-induced cracks in a compacted clay liner significantly deteriorate the hydraulic barrier performance of landfill covers. The present study explores the effects of polypropylene (PP) fiber reinforcement on the hydrological response and crack resistance of compacted steel slag (SS; 90 wt%) - bentonite (10 wt%) mixtures under drying and wetting cycles. Comprehensive tests were conducted to explore the impact of different fiber lengths (6-12 mm) and contents (0-0.4 % wt.%), including hydraulic conductivity tests for measuring the saturated hydraulic conductivity (k s ), unconfined-penetration tests for measuring the tensile strength, small-sized plate tests for quantifying crack development, and large-sized bucket tests for studying the hydrological response and crack characteristics. Higher fiber contents and longer fiber lengths increased the k s -value of the specimens. For a 0.3 % fiber content, the tensile strength peaked for the 9-mm fiber. Consistently, the specimen reinforced with the 9-mm fibers exhibited significantly fewer cracks than those reinforced with the 6-mm and 12-mm fibers. It was because the 6-mm fibers had a shorter anchorage length, while the 12-mm fibers tended to agglomerate. The large-sized bucket tests showed that fiber reinforcement limited crack development significantly under wetting and drying cycles, reducing the rainfall infiltration by 40 % and enhancing the soil water retention capacity. Finally, a 0.3 wt% of 9-mm PP was recommended to reinforce the compacted SS-bentonite mixtures., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

The iron and steel-making industries have garnered significant attention in research related to low-carbon transitions and the reuse of steel slag. This industry is known for its high carbon emissions and the substantial amount of steel slag it generates. To address these challenges, a waste heat recovery process route has been developed for molten steel slag, which integrates CO 2 capture and fixation as well as efficient utilization of steel slag. This process involves the use of lime kiln flue gas from the steel plant as the gas quenching agent, thereby mitigating carbon emissions and facilitating carbonation conversion of steel slag while simultaneously recovering waste heat. The established carbonation model of steel slag reveals that the insufficient diffusion of CO 2 gas molecules within the product layer is the underlying mechanism hindering the carbonation performance of steel slag. This finding forms the basis for enhancing the carbonation performance of steel slag. The results of Aspen Plus simulation indicate that 1 t of steel slag (with a carbonation conversion rate of 15.169 %) can fix 55.19 kg of CO 2 , process 6.08 kmol of flue gas (with a carbon capture rate of 92.733 %), and recover 2.04 GJ of heat, 0.43 GJ of exergy, and 0.68 MWh of operating cost. These findings contribute to the development of sustainable and efficient solutions for steel slag management, with potential applications in the steel production industry and other relevant fields., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Using steel slag (SS) as cementitious material and fine aggregate in concrete is an effective and environmental method for SS consumption and cost reduction. In this paper, SS was recycled in large volumes in concrete as partial cementitious material and fine aggregate. The compressive strength and reaction mechanism of cementitious material with different SS powder contents including 20%, 25%, 30%, and 35% were presented. The results indicated that 20% of SS powder improved the compressive strength by 34.57% and the hydration products were ettringite (AFt) and calcium silica hydrate(C-(A)-S-H). Furthermore, the mechanical and durability performance of concrete with SS as fine aggregate were investigated. When the SS substitution rate was 75%, the compressive strength was increased by 37.83%. The volume shrinkage rate and 28d-carbonation depth were reduced nearly by 64% for 90 days and 2.33 mm, respectively. The chloride ion penetration resistance reached the optimal grade Q-V and abrasion resistance was improved by nearly 24%. Along with the reduced CO 2 by 210-294 kg/m 3 and the decreased cost by 12.61 USD/m 3 , it is regarded as an effective method to consume steel slag. As such, this research provided a scientific and systematic basis for the large-scale disposal and utilization of industrial waste residues as well as recycled materials preparation., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The iron and steel industry (ISI) is a significant source of sulfur dioxide and particulate matter pollution in China. Existing research on regional environmental regulation or ISI emission reduction strategies tends to overlook spillover effects and the enterprise perspective. During the heating season, production limitations in ISI are potential policy measures for achieving structural emission reductions in heavily polluted cities in China's Jing-Jin-Ji and surrounding regions. We adopt a bottom-up modeling approach, incorporating effective production time to describe enterprise behavior and establishing a quantitative trade model based on trade theory. By modeling three types of production restriction policies outlined in policy documents, we evaluate the emission reduction effects of structure-adjustment measures using the example of reduced effective production time for steel-producing enterprises in the air pollution transmission channel in the Beijing-Tianjin-Hebei area. The results indicate the following: (1) Reducing the effective production time of ISI enterprises can help decrease domestic production value and total factor productivity in pollution-intensive industries, including but not limited to ISI. It also leads to reduced emissions of various pollutants in the implementation regions. (2) Due to interprovincial trade and input-output linkages, structural reduction measures in certain regions have implications for almost all other provinces' industrial structures. Differences in initial industrial structures, factor endowments, and geographical locations contribute to varying directions and magnitudes of industrial structural changes. Pollution-intensive industries' share tends to increase higher in less developed regions. (3) Our estimated pollution reduction is smaller compared to the literature evaluating clean air policies in similar regions using top-down strategies. This discrepancy arises because we analyze a single policy tool rather than modeling industry-wide emission fluctuations from the top down. Additionally, our modeling approach allows us to examine dynamic changes in comparative advantages. The increase in production scale for certain industries in policy-affected regions partially offsets the decline in pollution emissions. These findings enhance our understanding of structure-adjustment reduction measures' role and highlight their potential advantages and limitations., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

In the present investigation, biocorrosion inhibition efficiency of Syzygium aromaticum (clove) aqueous extract on carbon steel in presence of four corrosion causing bacterial strains (Bacillus subtilis, Streptomyces parvus, Pseudomonas stutzeri, and Acinetobacter baumannii) was explored. Weight loss, potentiodynamic polarization, and AC impedance studies were carried out with and without bacterial strains and clove extract. The results obtained from weight loss and AC impedance studies indicate that these corrosion causing bacterial strains accelerated the biocorrosion reaction and biofilm playing a key role in this process. However, the addition of clove extract into the corrosive medium decreased the corrosion current and increased the solution and charge transfer resistance. The significant inhibition efficiency of about 87% was archived in the mixed consortia system with clove extract. The bioactive compounds were playing an important role in the antibacterial activity of the clove extract. It was revealed that clove extract has both biocidal and corrosion inhibition properties.

China is the most important steel producer in the world, and its steel industry is one of the most carbon-intensive industries in China. Consequently, research on carbon emissions from the steel industry is crucial for China to achieve carbon neutrality and meet its sustainable global development goals. We constructed a carbon dioxide (CO 2 ) emission model for China's iron and steel industry from a life cycle perspective, conducted an empirical analysis based on data from 2019, and calculated the CO 2 emissions of the industry throughout its life cycle. Key emission reduction factors were identified using sensitivity analysis. The results demonstrated that the CO 2 emission intensity of the steel industry was 2.33 ton CO 2 /ton, and the production and manufacturing stages were the main sources of CO 2 emissions, accounting for 89.84% of the total steel life-cycle emissions. Notably, fossil fuel combustion had the highest sensitivity to steel CO 2 emissions, with a sensitivity coefficient of 0.68, reducing the amount of fossil fuel combustion by 20% and carbon emissions by 13.60%. The sensitivities of power structure optimization and scrap consumption were similar, while that of the transportation structure adjustment was the lowest, with a sensitivity coefficient of less than 0.1. Given the current strategic goals of peak carbon and carbon neutrality, it is in the best interest of the Chinese government to actively promote energy-saving and low-carbon technologies, increase the ratio of scrap steel to steelmaking, and build a new power system., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

Steel slags (SS) are the major waste produced by iron and steel industry. Slags may be reused as recycled materials, instead of natural aggregates (NA), to reduce the final disposal in a landfill and the exploitation of raw materials. However, the reuse of SS may generate a potential release of toxic compounds for the environment and humans. The purpose of this study was to evaluate the toxicity and genotoxicity of SS, in comparison with NA, by using an integrated chemical-biological approach to enable their safe reuse in engineering applications. Leaching solutions from samples were obtained by using short-term leaching tests (CEN EN 12457-2, 2004) usually adopted for the evaluation of waste recovery and final disposal. Chemical analyses of leachates were performed according to the Italian legislation on waste recovery (Ministerial Decree 186/2006). The leaching solutions were assayed by using toxicity test on Daphnia magna. Moreover, mutagenicity/genotoxicity tests on Salmonella typhimurium, Allium cepa, and human leucocytes and fibroblasts were carried out. The releases of pollutants from all samples were within the limits of the Italian legislation for waste recovery. Despite the effects that SS and NA could have on different cells, in terms of toxicity and genotoxicity, globally, SS do not seem to be any more hazardous than NA. This ecotoxicological assessment, never studied before, is important for promoting further studies that may support the decision-making process regarding the use of such types of materials., (© 2020 Environmental Mutagen Society.)

Riboflavin (RF), as a common electron mediator that can accelerate extracellular electron transfer (EET), is usually used as a probe to confirm EET-microbiologically influenced corrosion (MIC). However, the acceleration mechanism of RF on EET-MIC is still unclear, especially the effect on gene expression in bacteria. In this study, a 13-mer antimicrobial peptide E6 and tetrakis hydroxymethyl phosphonium sulfate (THPS) were used as new tools to investigate the acceleration mechanism of RF on Fe 0 -to-microbe EET in corrosion of EH36 steel caused by Pseudomonas aeruginosa. 60 min after 20 ppm (v/v) THPS and 20 ppm THPS & 100 nM E6 were injected into P. aeruginosa 1 and P. aeruginosa 2 (two glass bottles containing P. aeruginosa with different treatments) at the 3-d incubation, respectively, P. aeruginosa 1 and P. aeruginosa 2 had a similar planktonic cell count, whereas the sessile cell count in P. aeruginosa 1 was 1.3 log higher than that in P. aeruginosa 2. After the 3-d pre-growth and subsequent 7-d incubation, the addition of 20 ppm (w/w) RF increased the weight loss and maximum pit depth of EH36 steel in P. aeruginosa 1 by 0.7 mg cm -2 and 4.1 μm, respectively, while only increasing those in P. aeruginosa 2 by 0.4 mg cm -2 and 1.7 μm, respectively. This suggests that RF can be utilized by P. aeruginosa biofilms since the corrosion rate should be elevated by the same value if it only acts on the planktonic cells. Furthermore, the EET capacity of P. aeruginosa biofilm was enhanced by RF because the protein expression of cytochrome c (Cyt c) gene in sessile cells was significantly increased in the presence of RF, which accelerated EET-MIC by P. aeruginosa against EH36 steel., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The fluctuating water-line corrosion of EH40 steel in sterile and biotic media was investigated with a wire beam electrode. When the coupons were partially immersed in the sterile medium, the position of the low water-line acted as the cathodic zone and the area below the low water-line constantly served as the main anodic zone. The thin electrolyte layers with uneven thickness promoted the galvanic current of the region below the low water-line. Different from the sterile environment, the metabolism of Halomonas titanica with oxygen as the final electron acceptor reduced the dissolved oxygen concentration, which resulted in the position of the low water-line acting as the anodic zone., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Anaerobic digestion for flexible biogas production can lead to digestion inhibition under high shock loads. While steel slag addition has shown promise in enhancing system buffering, its limitations necessitate innovation. This study synthesized the nitrogen-doped activated carbon composite from steel slag to mitigate intermediate product accumulation during flexible biogas production. Material characterization preceded experiments introducing the composite into anaerobic digestion systems, evaluating its impact on methane production efficiency under hydraulic and concentration sudden shocks. Mechanistic insights were derived from microbial community and metagenomic analyses, facilitating the construction of the modified Anaerobic Digestion Model No. 1 (ADM1) to quantitatively assess the material's effects. Results indicate superior resistance to concentration shocks with substantial increment of methane production rate up to 33.45% compared with control group, which is mediated by direct interspecies electron transfer, though diminishing with increasing shock intensity. This study contributes theoretical foundations for stable flexible biogas production and offers an effective predictive tool for conductor material reinforcement processes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Steel slag (SS) is a byproduct that comes from the production of crude steel in alkaline oxidation furnaces. Resource utilization of steel slag, a calcium-silicon solid waste, is an urgent problem. This paper investigates a solid waste disposal method that applies different steel slag contents to modify dispersive soil. The engineering properties and modification mechanisms of dispersive soil specimens are studied and revealed by performing microstructure, mineral evolution, unconfined compressive strength (UCS), and tensile strength analysis. The pinhole test, mud ball crumb test (BCT), and mud cube crumb test (CCT) were carried out to determine the dispersivity of the soil specimens. Results show that when the steel slag content increases from 1% to 10%, the unconfined compressive strength and tensile strength increase by 176.05% and 75.40%, respectively. For soil specimens without curing time under 50 mm water head, the weight loss of the specimen with 10% steel slag content decreases by 72.03% compared to specimens with 1% steel slag content. Microstructural and mineralogical analyses indicate that the hydration reaction of steel slag changes the ionic composition of the soil and generates reaction products with effects such as filling and connection. To sum up, steel slag effectively improves water stability and mechanical properties of dispersive soil., Competing Interests: Declaration of competing interest The authors declared that they have no conflicts of interest to this work. We declare that we do not have any commercial or associative interest that represents a conflict of interest in connection with the work submitted, (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Steel mill wastewater sludge, as an iron-enriched solid waste, was expected to be converted into iron-enriched biochar with acceptable environmental risk by pyrolysis. The purpose of our study was to evaluate the chemical speciation transformation of heavy metals in biochar under various pyrolysis temperatures and its reutilization for tetracycline (TC) removal. The experimental data indicated that pyrolysis temperature was a key factor affecting the heavy metals speciation and bioavailability in biochar, and biochar with pyrolysis temperature at 450 °C was the most feasible for reutilization without potential risk. The endogenous iron-enriched biochar (FSB450) showed highly efficient adsorption towards TC, and its maximum adsorption capacity could reach 240.38 mg g -1 , which should be attributed to its excellent mesoporous structure, abundant functional groups and endogenous iron cycling. The endogenous iron was converted to a stable iron oxide crystalline phase (Fe 3 O 4 and MgFe 2 O 4 ) by pyrolysis, which underwent a valence transition to form a coordination complex with TC by electron shuttling in the FSB450 matrix. The study provides a win-win approach for resource utilization of steel wastewater sludge and treatment of antibiotic contamination in wastewater., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Heavy carbon industries produce solid side stream materials that contain inorganic chemicals like Ca, Na, or Mg, and other metals such as Fe or Al. These inorganic compounds usually react efficiently with CO 2 to form stable carbonates. Therefore, using these side streams instead of virgin chemicals to capture CO 2 is an appealing approach to reduce CO 2 emissions. Herein, we performed an experimental study of the mineral carbonation potential of three industrial steel slags via aqueous, direct carbonation. To this end, we studied the absorption capacities, reaction yields, and physicochemical characteristics of the carbonated samples. The absorption capacities and the reaction yields were analyzed through experiments carried out in a reactor specifically designed to work without external stirring. As for the physicochemical characterization, we used solid-state Fourier Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscope (SEM). Using this reactor, the absorption capacities were between 5.8 and 35.3 g/L and reaction yields were in the range of 81-211 kg CO 2 /ton of slag. The physicochemical characterization of the solid products with solid FTIR, XRD and SEM indicated the presence of CaCO 3 . This suggests that there is potential to use the carbonated products in commercial applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

The processing of steel waste slag from the black metallurgical sector seriously threatened the ecology. To counter these dangers, appropriate detoxification methods were required. Vermitechnology was one such strategy that could successfully convert this industrial waste into nutrient-rich products suitable for use in agriculture. This research primarily focuses on employing vermitechnology for the transformation of waste steel slag into vermicompost and to determine changes in microbial composition, nutrient cycling, and metal detoxification facilitated by earthworms (Eisenia fetida). Earthworm populations in steel waste vermibeds (sw-vermibeds) increased by 2.87-3.07 folds. T1(SW + CD-1:1) comparatively showed increased levels of nutrients such as nitrogen, phosphorus, and potassium. Microbial and enzymatic parameters were more pronounced in treatment T1. The findings of phospholipid fatty acid (PLFA) diversity demonstrate microbial diversity and fatty acid composition. Based on PLFA Sobol Sensitivity Analysis (SSA), PUFA and cyclo were the most sensitive inputs to the presence of heavy metal (HMs) concentrations in SW. In accordance with Taylor-based modelling, R-tree, and Mars were the most trusted regression models for predicting HMs toxicity on microbes. The bioavailable metal fractions of HMs (Fe, Ni, Cd, Cu, Pb, and Cr) decreased by 61-83%. The correlation was performed for 0 and 90 days for metal microbial interactions r (0 days), [BSR vs Fe, Cd, Cu, Ni = -0.99, -0.82, -0.43, -0.99] and r (90 days), [FDA vs Fe, Cu, Ni = -0.97, -0.47, -0.95]. Overall, the results indicated that T1(1:1 SW + CD) provided more favorable conditions for the development of microbes and Eisenia fetida. This research presents a new perspective to the world community on the transformation of harmful steel waste slag into advantageous biological resources by introducing a novel method of employing Eisenia fetida to remediate hazardous steel waste slag., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Microbiologically influenced corrosion (MIC) is a complicated process that happens ubiquitously and quietly in many fields. As a useful nutritional ingredient in microbial culture media, yeast extract (YE) is a routinely added in the MIC field. However, how the YE participated in MIC is not fully clarified. In the present work, the effect of YE on the growth of sulfate reducing prokaryotes (SRP) Desulfovibrio bizertensis SY-1 and corrosion behavior of X70 pipeline steel were studied. It was found that the weight loss of steel coupons in sterile media was doubled when YE was removed from culture media. However, in the SRP assays without YE the number of planktonic cells decreased, but the attachment of bacteria on steel surfaces was enhanced significantly. Besides, the corrosion rate of steel in SRP assays increased fourfold after removing YE from culture media. MIC was not determined for assays with planktonic SRP but only for biofilm assays. The results confirm the effect of YE on D. bizertensis SY-1 growth and also the inhibitory role of YE on MIC., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The eastern section of China's West-east gas transmission project is laid in acidic red soil. NRB are widespread in soils and play an important role in metal corrosion. In this article, the corrosion failure behavior and mechanism of X80 pipeline steel under the action of NRB in simulated acidic soil were studied. It was found that the biofilm of B. subtilis had significant inhibitory on the overall corrosion of X80 steel. Electrochemical results prove that the corrosion rate of the sterile group after 14 days of immersion was about 4.5 times that of the bacterial group. However, the biofilm promotes the formation of local corrosion pits. Confocal laser scanning microscopy images indicate that that the corrosion pit depth of the bacterial group (46.1 μm) was three times that of the bacterial-free group (15.7 μm) after 14 days. The pH of the acidic environment was slightly improved by B. subtilis. XPS results proved that B. subtilis complicates the corrosion products of X80 steel through its nitrate reduction ability and metabolism., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

MALDI-TOF MS identifications of microorganisms in a clinical laboratory were investigated, comparing steel targets with MBT Biotargets. By using MBT Biotargets, the score values of yeast identifications increased, whereas the score values of Gram-negative bacteria decreased. Switching to MBT Biotargets did not negatively impact overall frequencies of high confidence identifications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.)

The issue of material failure attributed to microbiologically influenced corrosion (MIC) is escalating in seriousness. Microorganisms not only facilitate corrosion but certain beneficial microorganisms also impede its occurrence. This study explored the impact of marine B. velezensis on the corrosion behavior of X65 steel in simulated offshore oilfield produced water. B. velezensis exhibited rapid growth in the initial stages, and the organic acid metabolites were found to promote corrosion. Subsequently, there was an increase in cross-linked "networked" biofilms products, a significant rise in the prismatic shape of corrosion products, and a tendency for continuous development in the middle and late stages. The organic/inorganic mineralized film layer formed on the surface remained consistently complete. Metabolic products of amino acid corrosion inhibitors were also observed to be adsorbed into the film. B. velezensis altered the kinetics of the X65 steel cathodic reaction, resulting in a deceleration of the electrochemical reaction rate. The mineralization induced by B. velezensis effectively slowed down the corrosion rate of X65 steel., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The microbiologically influenced corrosion inhibition (MICI) of Q235 carbon steel by Shewanella putrefaciens and mediated calcium deposition were investigated by regulating microbial mineralization. In a calcium-rich medium, S. putrefaciens rapidly created a protective calcium carbonate layer on the steel surface, which blocked Cl - diffusion. Without calcium, the biofilm and rust layer mitigated pitting corrosion but did not prevent Cl - penetration. Potentiodynamic polarization results indicated that the current densities (i corr values) of the corrosion produced in the S. putrefaciens-inoculated media with and without calcium were 0.4 μA/cm 2 and 0.6 μA/cm 2 , respectively. Similarly, compared with those under sterile conditions, the corrosion inhibition rates were 92.2% and 87.4% higher, respectively. Electrochemical impedance spectroscopy (EIS) and scanning electrochemical microscopy (SECM) confirmed that the MICI was caused by the combination of microbial aerobic respiration and the deposited layers. Even under nonbiological conditions, S. putrefaciens-induced calcium carbonate deposition inhibited corrosion., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Natural gums due to availability, multifunctionality, and nontoxicity are multifaceted in application. In corrosion inhibition applications, their performance, in unmodified form is unsatisfactory because of high hydration rate, solubility issues, algal and microbial contamination, as well as thermal instability. This work attempts to enhance the inhibitive performance of Berlinia grandiflora (BEG) and cashew (CEG) exudate gums through various modification approaches. The potential of biogenic BEG and CEG gums-silver (Ag) nanocomposites (NCPs) for corrosion inhibition of mild steel in 1 M HCl is studied. The nanocomposites were characterized using the FTIR, UV-vis, and TEM techniques. The corrosion studies through the gravimetric and electrochemical (PDP, EIS, LPR, and EFM) analyses reveal moderate inhibition performance by the nanocomposites. Furthermore, the PDP results reveal that both inhibitors are mixed-type with maximum corrosion inhibition efficiencies (IEs) of 61.2 % and 54.2 % for BEG-Ag NCP and CEG-Ag NCP, respectively at an optimum concentration of 1.0 %. Modification of these inhibitors with iodide ion (KI) significantly increased the IE values to 90.1 % and 88.5 % for BEG-Ag NCP and CEG-Ag NCP at the same concentration. Surface observation of the uninhibited and inhibited steel samples using SEM/EDAX, 3D Surface profilometer, and AFM affirm that the modified nanocomposites are highly effective., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Every day, significant quantities of solid wastes are generated in steel companies which causes environment pollution. These waste materials differ from one steel plant to other depending upon the steelmaking processes adopted and pollution control equipment installed. The most common type of solid wastes originated in steel plant are hot metal pretreatment slag, dust, GCP sludge, mill scale, scrap, etc. At present, various efforts and experiments are being carried out in order to make use of 100% solid wastes products in order to reducing cost of disposal, saving raw materials and conserving energy. Then, the purpose of our paper is the access to reuse potential of the steel abundant mill scale for sustainable industrial applications. This material is a very valuable industrial waste due to its richness in iron (about 72% Fe), chemical stability, and variable usage in multiple fields which implies that it can bring social and environmental benefits. This work aims to recover Mill scale and reuse it to synthesize three iron oxide pigments; hematite (α-Fe 2 O 3 , red color), magnetite (Fe 3 O 4 , black color), and maghemite (γ-Fe 2 O 3 , brown color). To achieve this objective, Mill scale needs to be refined and granted to react with sulfuric acid to obtain ferrous sulfate FeSO 4 .xH 2 O which is used to produce hematite by calcination between 600 and 900 °C, then, magnetite by reduction of hematite using a reducing agent at 400 °C and maghemite from a thermal treatment of magnetite at 200 °C. It was shown within the experiments that the mill scale contains between 75% and 86.66% of Fe and a uniform distribution of particles size with a low span. That gave red particles size (0.18-0.193 µm) and specific surface area SSA: 6.12 m 2 /g, black particles sizes (0.2-0.3 µm) and SSA 4.92 m 2 /g, brown particles size (0.18-0.189 µm) and SSA 6.32 m 2 /g. The results revealed that the mill scale was successfully converted into pigments with good qualities. So, it is recommended to work from the beginning at synthesis hematite by copperas red process and then magnetite and maghemite in order to control shape of magnetite and maghemite (spheroidal) to get the best results economically and environmentally., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Owing to the effects of seawater erosion, dry/wet cycles, dissolved oxygen and microorganisms, the corrosion of steel in marine tidal environments is a serious threat to the safe and stable operation of marine equipment and facilities. Among them, microbiologically influenced corrosion (MIC) of steel has received increasing attention. Cathodic protection (CP) is frequently used to control the corrosion of offshore steel structures. However, in the presence of microorganisms, implementation of CP and its specific effects remain controversial. In this study, the influence of Pseudomonas sp. on the CP efficiency of Zn sacrificial anodes (ZnSAs) during the tidal corrosion of X80 steel was studied. The results showed that CP efficiency exceeded 92% in an abiotic tidal environment. However, in the biotic tidal environment, Pseudomonas sp. significantly reduced the CP efficiency. Pseudomonas sp. and its biofilm promoted the corrosion of steel under CP, inhibited the formation of a complete calcareous deposit layer, which weakened the CP efficiency of ZnSA in the marine tidal environment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This study explores the impacts of neem oil biodiesel (BD), which was produced and characterized using GC-MS, FTIR, and UV-Vis spectroscopic techniques to elucidate pure and corrosion-product neem oil BD at room temperature (25 °C) and different immersion durations of 0, 28, 42, and 56 days. The OM and SEM were also employed to study the surface, structural integrity, and interphase interaction between the BD and the carbon steel (C1020) before and after immersion for different durations. The dominant fatty acid (FA) group in both pure and corrosion-product neem oil BD was C 18 , with a total composition of 72.3 %, hence determining the nature of the BD interaction with the carbon steel. The study revealed that carbon steel (C1020) was susceptible to attacks by neem oil BD, and the duration of immersion had substantial influence on the surface morphology and structural integrity of the steel. It is therefore anticipated that this study will significantly advance the field of alternative fuel research., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Microbiologically influenced corrosion (MIC) caused by corrosive microorganisms poses significant economic losses and safety hazards. Conventional corrosion prevention methods have limitations, so it is necessary to develop the eco-friendly and long-term effective strategies to mitigate MIC. This study investigated the inhibition of Vibrio sp. EF187016 biofilm on Geobacter sulfurreducens on carbon steel. Vibrio sp. EF187016 biofilm reduced the corrosion current density and impeded pitting corrosion. A thick and uniform Vibrio sp. EF187016 biofilm formed on the coupon surfaces, acting as a protective layer against corrosive ions and electron acquisition by G. sulfurreducens. The pre-grown mature Vibrio sp. EF187016 biofilms, provided enhanced protection against G. sulfurreducens corrosion. Additionally, the extracellular polymeric substances from Vibrio sp. EF187016 was confirmed to act as a green corrosion inhibitor to mitigate microbial corrosion. This study highlights the potential of active biofilms for eco-friendly corrosion protection, offering a novel perspective on material preservation against microbial corrosion., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

The American Iron and Steel Institute (AISI) gathered data between 1989 and 1997 to build an "objective database" to further understand the occupational exposures generated by the few asbestos-containing materials remaining at various steelmaking companies at this time. This paper analyzed the 520 samples from this campaign which occurred at five different steel manufacturers: Georgetown Steel Company, Inland Steel Company, Ling-Temco-Vought (LTV) Corporation, United States Steel Corporation, and Weirton Steel Corporation. This database is believed to have never previously been systematically organized. Samples were grouped based on sampling times to determine whether they should most appropriately be compared to the OSHA short-term excursion limit (EL) or the 8-hr time-weighted average (TWA) permissible exposure limit (PEL). Sampling times of 30 min or less were considered short-term samples, and samples of 180 min or greater were considered representative workday samples. Samples that did not fit into either category, with sampling times between 31 and 179 min, were considered task samples. Overall, the data indicated that the airborne concentrations were quite low in 1989 and they continued to be low through the study period which ended in 1997. Only seven out of 286 (approximately 2.5%) short-term or representative workday samples were in exceedance of the current OSHA OELs that were implemented in 1994 (short-term samples being compared to the 1 f/cc EL and representative workday samples being compared to the 0.1 f/cc 8-hr TWA PEL). Consistent with prior data, analysis of this dataset supports the view that materials containing asbestos were not used in many applications in the steel industry, and measured airborne concentrations of asbestos were almost always below the occupational exposure limits (OELs) in the post-OSHA era (1972-2000).

Herein, a novel chitosan Schiff base (CS-FGA) as a sustainable corrosion inhibitor has been successfully synthesized via a simple amidation reaction by using an imidazolium zwitterion and chitosan (CS). The corrosion inhibition property of CS-FGA for mild steel (MS) in a 1.0 M HCl solution was studied by various electrochemical tests and physical characterization methods. The findings indicate that the maximum inhibition efficiency of CS-FGA as a mixed-type inhibitor for MS in 1.0 M HCl solution with 400 mg L -1 reaches 97.6 %, much much higher than the CS and the recently reported chitosan-based inhibitors. Scanning electron microscopy (SEM), atomic force microscopy (AFM), and water contact angle (WCA) results reveal that the CS-FGA molecules firmly adsorb on the MS surface to form a protective layer. The adsorption of CS-FGA on the MS surface belongs to the Langmuir adsorption isotherm containing both the physisorption and chemisorption. According to the X-ray photoelectron spectroscopy (XPS) and UV-vis spectrum, FeN bonds presented on the MS surface further prove the chemisorption between CS-FGA and Fe to generate the stable protective layer. Additionally, theoretical calculations from quantum chemical calculation (DFT) and molecular simulations (MD) were performed to reveal the inhibition mechanism of CS-FGA., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Background: Historically, the use of asbestos in steelmaking has been limited to a few applications. Due to its physical and chemical properties, asbestos was not necessary or suitable for most purposes in a steel mill. The few applications where asbestos were used (i.e., certain gaskets, brakes, protective cloth, refractory materials, insulation materials, and hot top products) were replaced by alternative materials as they became available., Objective: We discuss historical uses of asbestos in steel manufacturing and the associated airborne asbestos concentrations collected at sixteen U. S. Steel facilities between 1972 and 2006., Methods: A total of 495 personal airborne asbestos samples from the U. S. Steel industrial hygiene records were analyzed across four time periods corresponding to changes in the OSHA permissible exposure limit (PEL) for asbestos. 68% of the samples (n = 337) were considered representative of an employee's workday. The remaining samples (n = 158) represented task samples. Samples were grouped by facility, department, and job category within the four time periods., Results: The average fiber concentrations measured for each facility and department over time were below the contemporaneous OSHA PEL. The mean representative workday asbestos air concentration from 1972 and 1975 was 1.09 f/cc. The mean representative workday concentration decreased to 0.13 f/cc between 1976 and 1985, then decreased again to 0.02 f/cc between 1986 and 1993 and 0.03 f/cc between 1994 and 2006. For task samples, the mean air concentration from 1972 to 1975 was 3.29 f/cc. The mean task sample concentration decreased to 0.48 f/cc between 1976 and 1985, then decreased again to 0.01 f/cc between 1986 and 1993 and 0.03 f/cc between 1994 and 2006. Only eleven out of the 495 samples (2.2%), for both task and representative workday samples, were in exceedance of the contemporaneous PEL(as an 8-hour TWA), ten of which occurred prior to 1978. Eight of these eleven PEL exceeding samples were task samples. Of the remaining three representative workday samples, two had unknown sampling times., Impact: This paper presents an analysis of all the available personal sampling data for airborne asbestos across 16 facilities of the U. S. Steel Corporation between 1972 and 2006. This dataset has previously never been publicly shared or analyzed. It represents one of the more complete industrial hygiene datasets from a corporation to be presented in a scientific journal and, due to the similarities in the processes at each mill, it should reflect analogous exposures throughout the steelmaking industry in the United States. One of the benefits of presenting these data is that it also provides insight into where asbestos-containing materials (ACMs) were used in the steel making process. This is just one example of a large firm that released information that had previously remained in file cabinets for decades. We believe that another benefit of publishing this paper is that it may encourage the largest firms in industry to assemble and analyze their industrial hygiene data to benefit the occupational hygiene, medical, and epidemiology communities. This can support future epidemiology studies and improve the design of future industrial hygiene programs., (© 2023. The Author(s).)

The practical applications of waterborne epoxy coatings are limited due to their poor barrier properties caused by the formation of numerous micropores and defects during the curing process. Herein, cellulose nanocrystals (CNCs)-reinforced waterborne epoxy coatings were fabricated by the direct addition of 0.2-1.0 wt% CNCs to waterborne epoxy emulsion followed by amine curing agent addition and spray coating. The incorporation of 0.2-0.5 wt% CNCs had no discernible impact on the stability of the waterborne epoxy emulsion. This led to the uniform dispersion of CNCs in the cured coating matrix, as evidenced by differential scanning calorimetry analysis. Because of the good compatibility, 0.2-0.5 wt% CNCs-reinforced epoxy coatings exhibited superior corrosion protection performance for steels. The impedance modulus of these coatings remained at 10 8  Ω cm 2 after being immersed in a 3.5 wt% NaCl solution for 21 d. The hydroxyl groups present on the CNC surface undergo a reaction with the epoxy group, enhancing intermolecular interaction and leading to the formation of a defect-free dense structure that improves coating barrier properties. However, the incorporation of an excessive amount of CNCs (i.e., 0.8 and 1.0 wt%) significantly compromised the corrosion resistance of epoxy coatings due to aggregation-induced coating defects. Overall, this study provides a facile and green strategy for corrosion resistance improvement of waterborne epoxy coatings., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Steel slag is a by-product of steelmaking which has emerged as a potential CO 2 sequestration material due to its high reactivity and abundance. This research investigates the use of steel slag waste for the direct capture of carbon from air and its storage through mineral carbonation. Two abundant wastes, blast-furnace slag (BFS) and ladle slag (LS), were tested for their carbon sequestration potential, and the effects of operational parameters such as reaction time between CO 2 and slag waste, temperature, liquid-solid ratio, and pressure on CO 2 sequestration were determined. Quantitative and qualitative results reveal that much higher CO 2 sequestration was achieved using LS compared to BFS after exposure to CO 2 for 1 day at room temperature. By increasing the exposure time to four days, levels of CO 2 sequestration increased gradually from 2.71% to 4.19% and 23.46%-28.21% for BFS and LS respectively. Increasing the temperature from 20 ± 2 °C to 90 ± 2 °C positively influenced CO 2 sequestration in BFS, resulting in an enhancement from 3.45% to 13.21%. However, the impact on LS was insignificant, with sequestration levels rising from 27.72% to 29.90%. Moreover, better CO 2 sequestration was observed for BFS than LS when the liquid-to-solid ratio increased from 3:1 to 4:1, whereupon the sequestration potential reached approximately 15% for BFS and 30% for LS at 90 ± 2 °C. Meanwhile, higher pressure reduced the sequestration potential of slag. The results of this study suggest that there is potential for scaling up the process to industrial applications and contributing to the reduction of CO 2 emissions in the steelmaking industry., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Industries today place a high premium on environmentally friendly supplies that may effectively inhibit metal dissolution at a reasonable cost. Hence, in this paper, we assessed the corrosion inhibition effectiveness of the Thiazole derivative namely, 2, 2-Dithio Bisbenzothiazole (DBBT) against mild steel (MS) corrosion in 1 M HCl. Several experimental approaches, including gravimetric analysis, potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS), and surface exploration using scanning electron/atomic force microscopy (SEM/AFM) and contact angle (CA), were utilized to conduct the measurements. In 1 M HCl corrosive medium at 298 K in the subsistence of 800 ppm of DBBT, this experiment indicated DBBT as an environment-friendly and sustainable corrosion inhibitor (CI) for MS, demonstrating an inhibition efficiency (IE %) of 97.71%. To deliver a deeper knowledge of the mechanism behind inhibitive behavior, the calculated thermodynamic and activation characteristics were applied. The calculated Gibbs free energy values indicated that the CI interacted physically and chemically with the MS surface, validating physio-chemical adsorption. The findings of the EIS research revealed that an upsurge in the doses of the CI is escorted by an upsurge in polarization resistance (R p ) from (88.05 → 504.04) Ωcm 2 , and a diminution in double layer capacitance (C dl ) from (97.46 → 46.33) μFcm -2 at (50 → 800) ppm respectively, affirming the inhibitive potential of DBBT. Additionally, the greatest displacement in E corr value being 76.13 mV < 85 mV, indicating that DBBT act as a mixed-form CI. To study the further impacts of DBBT on the inhibition capabilities of the compound under investigation, density functional theory (DFT) and molecular dynamics (MD) simulation were employed. Chemical and electrochemical approaches are in agreement with the computational analysis indicating DBBT is the most efficient CI., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

In this study, sulfur dots (GA-SDs) synthesized by using Gum Arabic (GA) as a green stabilizer were used as corrosion inhibitors and their inhibition effect for Q235 steel in 3.5- wt% NaCl solution was investigated by weight loss, electrochemical tests, and surface and interface analysis. The results revealed that the inhibition efficiency reached the maximum value of 96.5% at 250 mg/L and the water-soluble GA-SDs were able to adhere to the iron surface through the diffusion and agglomeration effect. The unique antibacterial activities demonstrated a 99.35% inhibition efficiency at 250 mg/L. Moreover, the optical properties endowed the inhibitors with the fluorescence tracing function, which is an effective approach to detecting the residual quantity of water treatment agents. This work may facilitate the development of the next generation of multifunction water treatment agents in industrial circulating water systems., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

This paper presents a study on the low-velocity impact response of lightweight steel foam concrete (LSFC) composite slabs. The LSFC composite slab consisted of a W-shaped steel plate, foam concrete and oriented strand board (OSB). Low-velocity impact tests on the LSFC composite slabs were conducted by employing an ultra-high heavy-duty drop hammer testing machine. The tests revealed the failure mode, impact force and displacement response of LSFC composite slabs. The effects of density and thickness of foam concrete and drop height on the peak impact force and energy absorption ratio were investigated. A finite element (FE) model was set up to predict the impact resistance of the LSFC composite slabs, and a good agreement between simulation and test results was achieved. In addition, an equivalent-single-degree-of-freedom (ESDOF) model was set up to predict the displacement response of the LSFC composite slabs under impact loading., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Meng et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Pseudomonas aeruginosa is a facultative bacterium that is pathogenic. It is ubiquitous in the environment including air handling systems. It causes microbiologically influenced corrosion (MIC) aerobically and anaerobically. In this work, P. aeruginosa was grown as a nitrate reducing bacterium (NRB) in Luria-Bertani medium with KNO 3 at 37 °C. Trehalase, an enzyme which plays a crucial role in biofilm formation was found to enhance the treatment of P. aeruginosa biofilm and its MIC against galvanized steel by tetrakis-hydroxymethyl phosphonium sulfate (THPS) green biocide. After a 7-d incubation, 30 ppm (w/w) trehalase reduced sessile cell count by 0.8-log, and it also reduced galvanized steel weight loss by 14%, compared to 2.3-log and 39%, respectively for the 30 ppm THPS treatment. The combination of 30 ppm THPS + 30 ppm trehalase reduced sessile cell count further by 0.1-log and weight loss by 13% compared to using THPS alone. Electrochemical corrosion measurements supported weight loss results. The injection of 20 ppm riboflavin into a 3-d P. aeruginosa broth failed to accelerate the corrosion rate, suggesting that nitrate reducing P. aeruginosa MIC of galvanized steel did not belong to extracellular electron transfer-MIC, because Zn was hydrolyzed after the microbe damaged the passive film., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

This paper develops a process-level carbon emission calculation model for iron and steel enterprises through the carbon emission mechanism of the whole production process. The relationship between material, energy and carbon flows is considered and combined. The carbon emissions of enterprises are divided into industrial emissions and combustion emissions, and the indirect emissions of purchased intermediate products and electricity purchased from the grid are also considered. Carbon emission targets and corresponding emission reduction strategies are formulated at the enterprise and process levels. For example, consider an iron and steel enterprise. The different types of carbon emissions are accounted for, with their reduction potential analysed based on the carbon material flow analysis method. The results show that the carbon emission of this enterprise is 1930.87 kgCO 2 /t (CS), and the combustion emission caused by energy flow is the main contributor to the enterprise's carbon emission, accounting for 57.02% of the total emission. The carbon emission during iron-making accounts for 69.06% of the entire process and is critical in any carbon emission reduction of the enterprise. Among them, process emissions from the blast furnace process account for 81.79% of industrial emissions of the whole process, which is 356.51 kgCO 2 /t (CS), and is the main challenge of low carbon transformation in this extensive process. This study highlights that increasing the integrated steel-making scrap ratio and electric furnace steel production can break through the existing emission reduction limits. A 65.02% carbon emission reduction can be achieved, and using green electricity can reduce emissions by 24.15%. Reasonably determining the amount of purchased coke and paying attention to the high-value recycling of byproduct gas resources in the plant are essential to achieve low-carbon economic development of steel., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Deterioration corrosion occurs between the external surface of oil pipelines and aerobic oil-degrading microorganisms in oil fields. Microorganisms with aerobic oil pollution remediation capabilities may catalyze more serious anaerobic microbial corrosion due to the carbon source supply. In this study, Acinetobacter soli strains were isolated from oil-contaminated environments, and their role in the deterioration corrosion behavior of X70 steel in an oil-water environment was investigated using the EDS multipoint scanning method. The presence of oil controls the deposition of carbon and phosphorus and diffusion of oxygen, leading to significant adhesion attraction and initial growth inhibition of biofilm on the metal surface. A. soli facilitates oxygen transfer and iron ion dissolution, thereby accelerating the pitting corrosion of X70 steel. This corrosion of the X70 steel, in turn, further accelerates the microbial degradation of oil, inhibiting the appearance of calcareous scale in the later stage of corrosion. The corrosion of X70 steel is influenced by microbial degradation, and the specific corrosion behaviors are related to the activity of A. soli in the petroleum environment. This study sheds light on the corrosion mechanisms of X70 steel by A. soli at different stages, providing insights into the interactions between microorganisms, oil pollution, and metal corrosion in oil fields., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)