Search

Objectives: The purpose of our study was to determine the order in which science and health researchers read scientific papers, their reasons for doing so and the perceived difficulty and perceived importance of each section., Study Design and Setting: An online survey open to science and health academics and researchers distributed via existing research networks, X (formerly Twitter), and LinkedIn., Results: Almost 90% of respondents self-declared to be experienced in reading research papers. 98.6% of the sample read the abstract first because it provides an overview of the paper and facilitates a decision on continuing to read on or not. Seventy-five percent perceived it to be the easiest to read and 62.4% perceived it to be very important (highest rank on a 5-point Likert scale). The majority of respondents did not read a paper in the IMRAD (Introduction, Methods, Results And Discussion) format. Perceived difficulty and perceived importance influenced reading order., Conclusion: Science and health researchers do not typically read scientific and health research papers in IMRAD format. The more important a respondent perceives a section to be, the more likely they are to read it. The easier a section is perceived, the more likely it will be read. We present recommendations to those teaching the skill of writing scientific papers and reports., Competing Interests: The authors declared that no competing interests exist., (Copyright: © 2024 Shiely et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Bisphenol A (BPA) is an industrial chemical that is widely used in various industrial applications. It has concerns in its use as a color developer in thermal paper receipts since it is identified as an endocrine disruptor and causes hormonal disturbances. In this study, thirty thermal paper receipt samples were randomly collected from various locations in Sharjah, United Arab Emirates and analyzed using high performance liquid chromatography-mass spectrometry. Sixty percent (60%) of receipt samples showed BPA levels above the acceptable limit (200 ng/mg) set by the European Union (EU) for thermal papers. On the other hand, 40% of the samples reported very low BPA levels (< 0.02 ng/mg). However, estimated weight adjusted daily intakes (EDI) ranged between 8.22 ×10-11 and 0.000812 μg/kg bw/day for the general population, and between 7.89×10-9 and 0.0681 μg/kg bw/day for the occupationally exposed cashiers. Thus, all calculated EDIs were below the European Food Safety Authority Tolerable Daily Intake (4 μg/kg·bw/day) and the provisional Health Canada Tolerable Daily Intake (25 ug/kg bw/day) under varying paper-to-skin transfer coefficients and absorption fractions. Nevertheless, due to its health effects and recent legal restrictions by EU, the occurrence of co-exposure to dietary and non-dietary sources should be considered in the health risk assessment of Bisphenol A, mainly for people with frequent occupational exposure to thermal paper, and especially with the increased use of sanitizers. The current study is a first within the UAE context in relation to BPA in thermal paper receipts, thus its significance especially with the recent EU enforcement of BPA limits in paper receipts. The study highlights that proper policies as well as education and awareness may assist in limiting transdermal BPA exposure for the general and occupationally exposed populations., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2023 Semerjian et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

How do author perceptions match up to the outcomes of the peer-review process and perceptions of others? In a top-tier computer science conference (NeurIPS 2021) with more than 23,000 submitting authors and 9,000 submitted papers, we surveyed the authors on three questions: (i) their predicted probability of acceptance for each of their papers, (ii) their perceived ranking of their own papers based on scientific contribution, and (iii) the change in their perception about their own papers after seeing the reviews. The salient results are: (1) Authors had roughly a three-fold overestimate of the acceptance probability of their papers: The median prediction was 70% for an approximately 25% acceptance rate. (2) Female authors exhibited a marginally higher (statistically significant) miscalibration than male authors; predictions of authors invited to serve as meta-reviewers or reviewers were similarly calibrated, but better than authors who were not invited to review. (3) Authors' relative ranking of scientific contribution of two submissions they made generally agreed with their predicted acceptance probabilities (93% agreement), but there was a notable 7% responses where authors predicted a worse outcome for their better paper. (4) The author-provided rankings disagreed with the peer-review decisions about a third of the time; when co-authors ranked their jointly authored papers, co-authors disagreed at a similar rate-about a third of the time. (5) At least 30% of respondents of both accepted and rejected papers said that their perception of their own paper improved after the review process. The stakeholders in peer review should take these findings into account in setting their expectations from peer review., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Rastogi et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Threatened shark species are caught in large numbers by artisanal and commercial fisheries and traded globally. Monitoring both which shark species are caught and sold in fisheries, and the export of CITES-restricted products, are essential in reducing illegal fishing. Current methods for species identification rely on visual examination by experts or DNA barcoding techniques requiring specialist laboratory facilities and trained personnel. The need for specialist equipment and/or input from experts means many markets are currently not monitored. We have developed a paper-based Lab-on-a-Chip (LOC) to facilitate identification of three threatened and CITES-listed sharks, bigeye thresher (Alopias superciliosus), pelagic thresher (A. pelagicus) and shortfin mako shark (Isurus oxyrinchus) at market source. DNA was successfully extracted from shark meat and fin samples and combined with DNA amplification and visualisation using Loop Mediated Isothermal Amplification (LAMP) on the LOC. This resulted in the successful identification of the target species of sharks in under an hour, with a working positive and negative control. The LOC provided a simple "yes" or "no" result via a colour change from pink to yellow when one of the target species was present. The LOC serves as proof-of-concept (PoC) for field-based species identification as it does not require specialist facilities. It can be used by non-scientifically trained personnel, especially in areas where there are suspected high frequencies of mislabelling or for the identification of dried shark fins in seizures., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Tiktak et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Anti-neutrophil cytoplasmic antibody (ANCA) associated vasculitis (AAV) is a chronic, relapsing-remitting condition associated with increased morbidity. Previous research has shown patients with AAV report high levels of fatigue, pain, depression and anxiety. Over recent years successful work has been carried out to improve clinical outcomes, resulting in reduced mortality and end stage kidney disease (ESKD). Despite this, little work has been done to better understand the role of the patient within this condition. The prevalence of AAV is increasing and to date, there is a shortage of specific tools that assess and measure key features relating to patient reported outcomes (PROs). This protocol details how we can better understand the lived experiences of those with AAV through the development of a disease specific, patient reported outcome measure (PROM), to be used in clinic practice. This will allow us to recognise and validate PROs and the impact the disease and its treatment has on patients' health related quality of life (HRQoL). In addition, we aim to identify potential differences in PRO's between demographics, organ involvement and treatment subgroups in AAV as well as outcomes relating to the patient experience. Patients from a single centre in the UK will be recruited to take part in the exploratory qualitative study which will include focus groups and semi-structured interviews. The inclusion criteria comprise anyone with a diagnosis of AAV and willing to participate, including those who have active or relapsing disease, those are economically active, unemployed, retired and patients receiving renal replacement therapy. The aim of the project is to identify key issues patients experience in relation to their disease and its management and how these can be better assessed in a new PROM developed for use in the clinic setting. This will enable better delivery of individualised care and inform shared decision making, while also serving as a platform for future research looking at PROs in other glomerulonephritides., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Floyd et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Paper mulberry pollen, declared a pest in several countries including Pakistan, can trigger severe allergies and cause asthma attacks. We aimed to develop an algorithm that could accurately predict high pollen days to underpin an alert system that would allow patients to take timely precautionary measures. We developed and validated two prediction models that take historical pollen and weather data as their input to predict the start date and peak date of the pollen season in Islamabad, the capital city of Pakistan. The first model is based on linear regression and the second one is based on phenological modelling. We tested our models on an original and comprehensive dataset from Islamabad. The mean absolute errors (MAEs) for the start day are 2.3 and 3.7 days for the linear and phenological models, respectively, while for the peak day, the MAEs are 3.3 and 4.0 days, respectively. These encouraging results could be used in a website or app to notify patients and healthcare providers to start preparing for the paper mulberry pollen season. Timely action could reduce the burden of symptoms, mitigate the risk of acute attacks and potentially prevent deaths due to acute pollen-induced allergy., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Kakakhail et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Postures at work are paramount in ergonomics. They can be determined using observation and inclinometry in a variety of measurement scenarios that may differ both in costs associated with collecting and processing data, and in efficiency, i.e. the precision of the eventual outcome. The trade-off between cost and efficiency has rarely been addressed in research despite the obvious interest of obtaining precise data at low costs. Median trunk and upper arm inclination were determined for full shifts in 28 paper mill workers using both observation and inclinometry. Costs were estimated using comprehensive cost equations; and efficiency, i.e. the inverted standard deviation of the group mean, was assessed on basis of exposure variance components. Cost and efficiency were estimated in simulations of six sampling scenarios: two for inclinometry (sampling from one or three shifts) and four for observation (one or three observers rating one or three shifts). Each of the six scenarios was evaluated for 1 through 50 workers. Cost-efficiency relationships between the scenarios were intricate. As an example, inclinometry was always more cost-efficient than observation for trunk inclination, except for observation strategies involving only few workers; while for arm inclination, observation by three observers of one shift per worker outperformed inclinometry on three shifts up to a budget of €20000, after which inclinometry prevailed. At a budget of €10000, the best sampling scenario for arm inclination was 2.5 times more efficient than the worst. Arm inclination could be determined with better cost-efficiency than trunk inclination. Our study illustrates that the cost-efficiency of different posture measurement strategies can be assessed and compared using easily accessible diagrams. While the numeric examples in our study are specific to the investigated occupation, exposure variables, and sampling logistics, we believe that inclinometry will, in general, outperform observation. In any specific case, we recommend a thorough analysis, using the comparison procedure proposed in the present study, of feasible strategies for obtaining data, in order to arrive at an informed decision support., Competing Interests: The authors have declared that no competing conflicts interests exist., (Copyright: © 2023 Mathiassen et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

In the first half of 2023, text-generative artificial intelligence (AI), including ChatGPT from OpenAI, has attracted considerable attention worldwide. In this study, first, we compared Japanese stylometric features of texts generated by ChatGPT, equipped with GPT-3.5 and GPT-4, and those written by humans. In this work, we performed multi-dimensional scaling (MDS) to confirm the distributions of 216 texts of three classes (72 academic papers written by 36 single authors, 72 texts generated by GPT-3.5, and 72 texts generated by GPT-4 on the basis of the titles of the aforementioned papers) focusing on the following stylometric features: (1) bigrams of parts-of-speech, (2) bigram of postpositional particle words, (3) positioning of commas, and (4) rate of function words. MDS revealed distinct distributions at each stylometric feature of GPT (3.5 and 4) and human. Although GPT-4 is more powerful than GPT-3.5 because it has more parameters, both GPT (3.5 and 4) distributions are overlapping. These results indicate that although the number of parameters may increase in the future, GPT-generated texts may not be close to that written by humans in terms of stylometric features. Second, we verified the classification performance of random forest (RF) classifier for two classes (GPT and human) focusing on Japanese stylometric features. This study revealed the high performance of RF in each stylometric feature: The RF classifier focusing on the rate of function words achieved 98.1% accuracy. Furthermore the RF classifier focusing on all stylometric features reached 100% in terms of all performance indexes (accuracy, recall, precision, and F1 score). This study concluded that at this stage we human discriminate ChatGPT from human limited to Japanese language., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2023 Zaitsu, Jin. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Contamination of waterways is of increasing concern, with recent studies demonstrating elevated levels of antibiotics, antidepressants, household, agricultural and industrial chemicals in freshwater systems. Thus, there is a growing demand for methods to rapidly and conveniently monitor contaminants in waterways. Here we demonstrate how a combination of paper microfluidic devices and handheld mobile technology can be used by citizen scientists to carry out a sustained water monitoring campaign. We have developed a paper-based analytical device and a 3 minute sampling workflow that requires no more than a container, a test device and a smartphone app. The contaminant measured in these pilots are phosphates, detectable down to 3 mg L-1. Together these allow volunteers to successfully carry out cost-effective, high frequency, phosphate monitoring over an extended geographies and periods., Competing Interests: The authors have declared that no competing interests exist.

Reading is considered a non-intuitive, cognitively demanding ability requiring synchronization between several neural networks supporting visual, language processing and higher-order abilities. With the involvement of technology in our everyday life, reading from a screen has become widely used. Several studies point to challenges in processing written materials from the screen due to changes in attention allocation when reading from a screen compared to reading from a printed paper. The current study examined the differences in brain activation when reading from a screen compared to reading from a printed paper focusing on spectral power related to attention in fifteen 6-8-year-old children. Using an electroencephalogram, children read two different age-appropriate texts, without illustrations, presented randomly on the screen and on a printed paper. Data were analyzed using spectral analyses in brain regions related to language, visual processing, and cognitive control, focusing on theta vs. beta waveforms. Results indicated that while reading from a printed paper was accompanied by higher energy in high-frequency bands (beta, gamma), reading from the screen was manifested by a higher power in the lower frequency bands (alpha, theta). Higher theta compared to the beta ratio, representing challenges in allocating attention to a given task, was found for the screen reading compared to the printed paper reading condition. Also, a significant negative correlation was found between differences in theta/beta ratio for screen vs paper reading and accuracy level in the age-normalized Sky-Search task measuring attention and a positive correlation with performance time. These results provide neurobiological support for the greater cognitive load and reduced focused attention during screen-based compared to print-based reading and suggest a different reliance on attention resources for the two conditions in children., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2023 Zivan et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Context: The retraction of research papers, for whatever reason, is a growing phenomenon. However, although retracted paper information is publicly available via publishers, it is somewhat distributed and inconsistent., Objective: The aim is to assess: (i) the extent and nature of retracted research in Computer Science (CS) (ii) the post-retraction citation behaviour of retracted works and (iii) the potential impact upon systematic reviews and mapping studies., Method: We analyse the Retraction Watch database and take citation information from the Web of Science and Google scholar., Results: We find that of the 33,955 entries in the Retraction watch database (16 May 2022), 2,816 are classified as CS, i.e., ≈ 8%. For CS, 56% of retracted papers provide little or no information as to the reasons. This contrasts with 26% for other disciplines. There is also some disparity between different publishers, a tendency for multiple versions of a retracted paper to be available beyond the Version of Record (VoR), and for new citations long after a paper is officially retracted (median = 3; maximum = 18). Systematic reviews are also impacted with ≈ 30% of the retracted papers having one or more citations from a review., Conclusions: Unfortunately, retraction seems to be a sufficiently common outcome for a scientific paper that we as a research community need to take it more seriously, e.g., standardising procedures and taxonomies across publishers and the provision of appropriate research tools. Finally, we recommend particular caution when undertaking secondary analyses and meta-analyses which are at risk of becoming contaminated by these problem primary studies., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2023 Shepperd, Yousefi. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Women are under-represented among authors of scientific papers. Although the number of retractions has been rising over the past few decades, gender differences among authors of retracted papers remain poorly understood. Therefore, this study investigated gender differences in authorship of retracted papers in biomedical sciences available on RetractionWatch. Among 35,635 biomedical articles retracted between 1970 and 2022, including 20,849 first authors and 20,413 last authors, women accounted for 27.4% [26.8 to 28.0] of first authors and 23.5% [22.9 to 24.1] of last authors. The lowest representation of women was found for fraud (18.9% [17.1 to 20.9] for first authors and 13.5% [11.9 to 15.1] for last authors) and misconduct (19.5% [17.3 to 21.9] for first authors and 17.8% [15.7 to 20.3] for last authors). Women's representation was the highest for issues related to editors and publishers (35.1% [32.2 to 38.0] for first authors and 24.8% [22.9 to 26.8] for last authors) and errors (29.5% [28.0 to 31.0] for first authors and 22.1% [20.7 to 23.4] for last authors). Most retractions (60.9%) had men as first and last authors. Gender equality could improve research integrity in biomedical sciences., Competing Interests: The other authors have no conflicts of interest to declare., (Copyright: © 2023 Pinho-Gomes et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

In our study, we have empirically studied the assessment of cited papers within the framework of the anchoring-and-adjustment heuristic. We are interested in the question whether the assessment of a paper can be influenced by numerical information that act as an anchor (e.g. citation impact). We have undertaken a survey of corresponding authors with an available email address in the Web of Science database. The authors were asked to assess the quality of papers that they cited in previous papers. Some authors were assigned to three treatment groups that receive further information alongside the cited paper: citation impact information, information on the publishing journal (journal impact factor) or a numerical access code to enter the survey. The control group did not receive any further numerical information. We are interested in whether possible adjustments in the assessments can not only be produced by quality-related information (citation impact or journal impact), but also by numbers that are not related to quality, i.e. the access code. Our results show that the quality assessments of papers seem to depend on the citation impact information of single papers. The other information (anchors) such as an arbitrary number (an access code) and journal impact information did not play a (important) role in the assessments of papers. The results point to a possible anchoring bias caused by insufficient adjustment: it seems that the respondents assessed cited papers in another way when they observed paper impact values in the survey. We conclude that initiatives aiming at reducing the use of journal impact information in research evaluation either were already successful or overestimated the influence of this information., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2023 Bornmann et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Background: The partograph has been endorsed by World Health Organization (WHO) since 1994 which presents an algorithm for assessing maternal and foetal conditions and labor progression. Monitoring labour with a partograph can reduce adverse pregnancy outcomes such as prolonged labor, emergency C-sections, birth asphyxia and stillbirths. However, partograph use is still very low, particularly in low and middle income countries (LMICs). In Bangladesh the reported partograph user rate varies from 1.4% to 33.0%. Recently, an electronic version of the partograph, with the provision of online data entry and user aid for emergency clinical support, has been tested successfully in different settings. With this proven evidence, we conducted and operations research to test the feasibility and effectiveness of implementing an e-partograph, for the first time, in 2 public hospitals in Bangladesh., Methods: We followed a prospective crossover design. Two secondary level referral hospitals, Jessore and Kushtia District Hospital (DH) were the study sites. All pregnant women who delivered in the study hospitals were the study participants. All nurse-midwives working in the labor ward of study hospitals were trained on appropriate use of both types of partograph along with standard labour management guidelines. Collected quantitative data was analyzed using SPSS 23 statistical software. Discrete variables were expressed as percentages and presented as frequency distribution and cross tabulations. Chi square tests were employed to test the association between exposure and outcome variables. Potential confounding factors were adjusted using multivariate binary logistic regression methods. Ethical approval was obtained from the institutional review board of the International Centre for Diarrheal Disease Research, Bangladesh (icddr,b)., Findings: In total 2918 deliveries were conducted at Jessore DH and 2312 at Kushtia DH during one-year study period. Of them, 1012 (506 in each facility) deliveries were monitored using partograph (paper or electronic). The trends of facility based C-section rates was downwards in both the hospitals; 43% to 37% in Jessore and from 36% to 25% in Kushtia Hospital. There was a significant reduction of prolonged labour with e-partograph use. In Kushtia DH, the prolonged labour rate was 42% during phase 1 with the paper version which came down to 29% during phase-2 with the e-partograph use. The similar result was observed in Jessore DH where the prolonged labour rate reduced to 7% with paper partograph from the reported 30% prolonged labour with e-partograph. The e-partograph user rate was higher than the paper partograph during both phases (phase 1: 3.31, CI: 2.04-5.38, p < .001 and in phase 2: 15.20 CI: 6.36-36.33, p < .001) after adjusting for maternal age, parity, gestational age, religion, mother's education, husband's education, and fetal sex., Conclusion: The partograph user rate has significantly improved with the e- partograph and was associated with an overall reduction in cesarean births. Use of the e-partograph was also associated with reduced rates of prolonged labour. This study has added to the growing body of evidence on the positive impact of e-partograph use. We recommend implementing e-partograph intervention at scale in both public and private hospitals in Bangladesh., Trial Registration: ClinicalTrials.gov NCT03509103., Competing Interests: The authors have declared that no competing interests exist.

Many complex physical systems exhibit a rich variety of discrete behavioural modes. Often, the system complexity limits the applicability of standard modelling tools. Hence, understanding the underlying physics of different behaviours and distinguishing between them is challenging. Although traditional machine learning techniques could predict and classify behaviour well, typically they do not provide any meaningful insight into the underlying physics of the system. In this paper we present a novel method for extracting physically meaningful clusters of discrete behaviour from limited experimental observations. This method obtains a set of physically plausible functions that both facilitate behavioural clustering and aid in system understanding. We demonstrate the approach on the V-shaped falling paper system, a new falling paper type system that exhibits four distinct behavioural modes depending on a few morphological parameters. Using just 49 experimental observations, the method discovered a set of candidate functions that distinguish behaviours with an error of 2.04%, while also aiding insight into the physical phenomena driving each behaviour., Competing Interests: This project received funding from a commercial source: Mathworks Ltd (https://uk.mathworks.com). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript. This does not alter our adherence to PLOS ONE policies on sharing data and materials.

How the role of dopamine differs according to the evolution of eusociality and how it is required in the flexible society of Polistes paper wasps need further clarification. In the present study, we compared the storage and usage of dopamine-related substances in brains between the castes of paper wasps. The head widths, lipid stores in the abdomen, and levels of biogenic amines in the brains were measured in newly emerged females before male emergence (workers) and after male emergence (gynes) in four Polistes species. The head widths and the lipid stores were significantly larger in gynes than workers in P. snelleni, P. rothneyi, and P. jokahamae, whereas they did not differ between castes in P. chinensis. The levels of dopamine precursors in the brains were significantly higher in gynes than workers in P. snelleni, P. chinensis, and P. rothneyi, whereas those of dopamine and its metabolites did not differ between castes in these species. In P. jokahamae, the levels of dopamine precursors and dopamine in the brains did not differ between castes, but those of a dopamine metabolite were significantly higher in gynes than workers. Thus, the caste differences in the levels of dopamine-related substances did not always match body sizes and nutritional reserves. Foundresses in P. rothneyi had significantly lower levels of dopamine precursors and higher levels of dopamine and its metabolite than newly emerged gynes. These results suggested that in several Polistes species, dopamine precursors were stored in the brain without dopamine biosynthesis at emergence, and then converted into dopamine in foundresses during colony founding. These neuroendocrinal states in Polistes species largely differed from those in eusocial bees., Competing Interests: The authors have no conflicts of interest to declare., (Copyright: © 2023 Sasaki et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Invasive paper wasps such as Polistes dominula are a major pest and problem for biodiversity around the globe. Safe and highly targeted methods for the control of these and other social wasp populations are needed. We attempted to identify potentially-lethal gene targets that could be used on adult paper wasps in a gene silencing or RNA interference (RNAi) approach. Double-stranded RNA (dsRNA) was designed to target genes for which silencing has proven lethal in other insects. dsRNA was provided either orally to foragers or directly injected into the wasps. We also provided the dsRNA unprotected or protected from degradation by gut nucleases in two different forms (lipofectamine and carbon quantum dots). The effects of oral delivery of 22 different gene targets to forager wasps was evaluated. The expression of five different genes was successfully reduced following dsRNA ingestion or injection. These gene targets included the FACT complex subunit spt16 (DRE4) and RNA-binding protein fusilli (FUSILLI), both of which have been previously shown to have potential as lethal targets for pest control in other insects. However, we found no evidence of significant increases in adult wasp mortality following ingestion or injection of dsRNA for these genes when compared with control treatments in our experiments. The methods we used to protect the dsRNA from digestive degradation altered gene expression but similarly did not influence wasp mortality. Our results indicate that while many of the same gene targets can be silenced and induce mortality in other insects, dsRNA and RNAi approaches may not be useful for paper wasp control., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2023 Bulgarella et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Some macroalgae drift on the ocean and are stranded on coasts, and these stranded brown macroalgae are regarded to be degraded by organisms. Alginate is a major component of brown macroalgae. An uncovering of how carbon is cycled through brown macroalgae is needed to deeply understand coastal ecosystems. In this study, to gain insights into metabolism of brown macroalgae and alginate in the organisms, we initially confirmed that supralittoral talitrid amphipods (beach fleas or sandhoppers collected on the Shibagaki coast in Ishikawa Prefecture, Japan) fed on the brown macroalgae. We then isolated bacteria such as Vibrio sp. with alginate-assimilating capability from the gut of the amphipods. Metagenomic analysis of the gut of amphipods housed in several conditions (e.g. macroalgae or paper as feed, non-sterilized or sterilized environment) showed no condition-dependent compositions of bacteria and fungi, but Vibrio sp. were detected at high frequency, in good agreement with the isolation of Vibrio sp. An intervention study using antibiotics showed that amphipods fed on algae or paper at about the same rate in the presence or absence of antibiotics, and that the antibiotics had no effects on the life span. Moreover, intervention with antibiotics completely killed Vibrio sp. and some other bacteria, and had significant effects on the composition of the flora in the gut, with elimination of the variations observed in the guts of amphipods housed without antibiotics. These data suggest that microbes that were killed by antibiotics, including Vibrio sp., in the gut of talitrid amphipods are not essential for assimilation of brown macroalgae., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2022 Nakamura et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Nucleic acid amplification is a sensitive and powerful tool for allergen detection. However, it is limited due to the relatively cumbersome methods required to extract nucleic acids from single plant seed allergen (e.g. peanut and soybean). In view of this, an approach of extracting nucleic acid with untreated glass-fiber paper (paper-based microfluidics) was applied for nucleic acid capture and purification from plant seed allergen and commercial products. After cut by hollow cylindrical cutter, a certain size the paper chip it used to absorb DNA. And this paper-based microfluidics with DNA was directly applied for amplification by loop-mediated isothermal amplification (LAMP). To evaluate the adsorption performance of paper chip to DNA, CTAB and SDS method were used as comparisons. From amplification results, the established technique has good specificity, high repeatability (C.V. values are 4.41% and 6.17% for peanut and soybean) and favorable sensitivity (7.39 ng/μL or peanut and 6.6 ng/μL for soybean), and successfully used for commercial products (2 kinds of candy and 2 kinds of cakes containing peanut, and 2 kinds of drinks, candy and 2 kinds of biscuits containing soybean). This speed and flexible detection method makes it suit for applications in point-of-care (POC) detection at different scenario, such as custom house and import port., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2022 Sun et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Background: Promoting physical activity (PA) for university students is essential as PA levels decrease during the transition from secondary to higher education. Providing technology-supported university courses targeting students' PA levels may be a viable option to combat the problem. However, it is still unclear how and what technologies should be implemented in university courses to promote PA. This study aims to create a series of design principles for technology-supported physical education courses that aim to increase university students' PA knowledge, motivation and levels., Method: The proposed methodology underpinning the research program is a seven-phase design-based research (DBR) approach, with the seven phases encompassed in four sequential studies. These four studies are a systematic review, a qualitative focus group study, a pilot study, and a randomised controlled trial (RCT) study. The protocol paper aims to detail the plan for conducting the four studies in a comprehensive and transparent manner, thus contributing to the methodological evidence base in this field., Discussion: Design principles generated from this project will contribute to the growing evidence focusing on effective design and implementation features. Future practitioners can also use these to develop physical education courses that aim to promote university students' physical activity levels, knowledge, and motivation., Trial Registration: The RCT registry number: ACTRN12622000712707, 18/05/2022., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2022 Sultoni et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

We describe herein a method of recharging used commercial spin columns or assembling homemade spin columns using filter paper as binding material for cost-effective, low throughput nucleic acid purification. The efficiency of filter paper-based spin columns was evaluated for purification of nucleic acids from various sources. Following protocols of commercial kits, we found filter paper to be a useful binding material for purification of nucleic acids, including plant genomic DNA, plant total RNA, PCR products, and DNA from agarose gels. However, filter paper has a weak binding affinity to plasmid DNA in tested miniprep protocols. Protocols for the use of filter paper recharged spin columns or homemade spin columns for low throughput purification of plant genomic DNA and total RNA with unused commercial kit buffers or less expensive homemade buffers are presented., Competing Interests: The authors have declared that no competing interests exist.

The present work was focused to design a cheap, rapid, portable and easy to use filter paper based assay for the qualitative and quantitate analysis of acetone. Sodium alginate gel was loaded with the acetone specific optical signal probe, and subsequently coated onto filter paper surface to design portable colorimetric assays for acetone monitoring. The color of the paper sensor strip was observed to change from dark yellow to light yellowish in the presence of varying concentrations of acetone. Three different color analyzing models including RGB, HSV, and LAB were employed to probe the output optical signal, and their performance was compared in terms of better interpretation of the generated signal. The LAB model was found to provide better analytical figures of merit with a linear response for the acetone concentration ranging from 2.5 to 1500 ppm, and a limit of detection of 0.5 ppm. Furthermore, the specificity of the designed filter paper based sensor was demonstrated against different common interfering compounds. The results demonstrated the potential of our proposed filter paper based sensor as a novel tool for the analysis of acetone., Competing Interests: The authors have declared that no competing interests exist.

Background: Advances in medicine and public health mean that people are living longer; however, a significant proportion of that increased lifespan is spent in a prolonged state of declining health and wellbeing which places increasing pressure on medical, health and social services. There is a social and economic need to develop strategies to prevent or delay age-related disease and maintain lifelong health. Several studies have suggested links between the gut microbiome and age-related disease, which if confirmed would present a modifiable target for intervention development. The MOTION study aims to determine whether and how changes in the gut microbiome are associated with physical and mental capacity. A comprehensive longitudinal multiparameter study such as this has not been previously undertaken., Methods: MOTION is a longitudinal prospective cohort study with a focus on gut health and cognitive function. 360 healthy individuals aged 60 years and older, living in East Anglia, UK will be recruited to the study, stratified into one of three risk groups (cohorts) for developing dementia based on their cognitive function. Participants will attend study appointments every six months over four years, providing stool and blood samples and a health questionnaire. Participants will also undergo physical measurements and cognitive tests at alternating appointments, and undergo Optical Coherence Tomography scans at 3 timepoints. Two subgroups of participants in the study will provide colonic tissue biopsies (n = ≥30 from each cohort), and brain imaging (n = 30) at two timepoints., Discussion: This study will provide new insights into the gut-(microbiota)-brain axis and the relationship between age-associated changes in gut microbe populations and cognitive health. Such insights could help develop new microbe-based strategies to improve lifelong health and wellbeing., Trial Registration: This study is registered in the ClinicalTrials.gov Database with ID: NCT04199195 Registered: May 14, 2019., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2022 Phillips et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

DNA extraction, a vital pre-requisite for most biological studies, continues to be studied extensively. According to some studies, DNA shows a certain degree of absorbability on filter paper made of plant fiber-based adsorbent material. However, the principle underlying such specific adsorption as well as plant species associated with plant fiber-based adsorbents and optimized extraction conditions have not yet been studied. This study demonstrates the tight correlation between crystallinity and hygroscopicity in plant fiber-based adsorbents used for DNA extraction and proposes the concept of DNA adsorption on plant fiber-based adsorbents, for the first time. We also explored optimal extracting and eluting conditions and developed a novel plant fiber-based DNA extraction method that was quadruple times more powerful than current approaches. Starting with the screening of various types of earthed plant fiber-based adsorbents, we went on to mine new plant fiber-based adsorbents, bamboo paper and degreased cotton, and succeeded in increasing their efficiency of DNA extraction to 4.2 times than that of current approaches. We found a very strong correlation between the crystallinity and hygroscopicity of plant fiber-based adsorbents which showed efficiency for DNA extraction, and thus propose a principle that potentially governs such specific adsorption processes, in the hope that this information may guide related multidisciplinary research studies in the future. Nanodrop, electrophoresis and PCR were selected to demonstrate the quantity, quality, integrity and utility of the extracted DNA. Furthermore, crystallinity, hygroscopicity, pore size distribution and composition of plant fiber-based adsorbents were studied to explore their correlation in an attempt to understand the principle underlying this particular type of adsorption. The findings of this study may be further extended to the extraction of other types of nucleic acids with similar biochemical properties., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2022 Ye, Lei. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Non-invasive diagnosis on biological liquid samples, such as urine, sweat, saliva, and tears, may allow patients to evaluate their health by themselves. To obtain accurate diagnostic results, target liquid must be precisely sampled. Conventionally, urine sampling using filter paper can be given as an example sampling, but differences in the paper structure can cause variations in sampling volume. This paper describes precise liquid sampling using synthetic microfluidic papers, which are composed of obliquely combined micropillars. Sampling volume accuracy was investigated using different designs and collection methods to determine the optimal design and sample collecting method. The optimized protocol was followed to accurately measure potassium concentration using synthetic microfluidic paper and a commercially available densitometer, which verified the usefulness of the synthetic microfluidic papers for precision sampling., Competing Interests: The authors have declared that no competing interests exist.

Introduction: Literature is lacking on the safety of storing contaminated PPE in paper bags for reuse, potentially increasing exposure to frontline healthcare workers (HCW) and patients. The aim of this study is to evaluate the effectiveness of paper bags as a barrier for fomite transmission of SARS-CoV-2 by storing face masks, respirators, and face shields., Methods: This quasi-experimental study evaluated the presence of SARS-CoV-2 on the interior and exterior surfaces of paper bags containing PPE that had aerosolized exposures in clinical and simulated settings. Between May and October 2020, 30 unique PPE items were collected from COVID-19 units at two urban hospitals. Exposed PPE, worn by either an infected patient or HCW during a SARS-CoV-2 aerosolizing event, were placed into an unused paper bag. Samples were tested at 30-minute and 12-hour intervals., Results: A total of 177 swabs were processed from 30 PPE samples. We found a 6.8% positivity rate among all samples across both collection sites. Highest positivity rates were associated with ventilator disconnection and exposure to respiratory droplets from coughing. Positivity rates differed between hospital units. Total positivity rates were similar between 30-minute (6.7%) and 12-hour (6.9%) sample testing time intervals. Control samples exposed to inactivated SARS-CoV-2 droplets had higher total viral counts than samples exposed to nebulized aerosols., Conclusions: Data suggests paper bags are not a significant fomite risk for SARS-CoV-2 transmission. However, controls demonstrated a risk with droplet exposure. Data can inform guidelines for storing and re-using PPE in situations of limited supplies during future pandemics., Competing Interests: Van Den Wymelenberg has a company called Duktile through which he provides healthy building consulting, including consulting related to viral pathogens, and he serves as a scientific advisor to EnviralTech, a company that conducts viral environmental surveillance, including in senior care facilities. This does not alter our adherence to PLOS ONE policies on sharing data and materials.

We propose a stochastic generative model to represent a directed graph constructed by citations among academic papers, where nodes and directed edges represent papers with discrete publication time and citations respectively. The proposed model assumes that a citation between two papers occurs with a probability based on the type of the citing paper, the importance of cited paper, and the difference between their publication times, like the existing models. We consider the out-degrees of citing paper as its type, because, for example, survey paper cites many papers. We approximate the importance of a cited paper by its in-degrees. In our model, we adopt three functions: a logistic function for illustrating the numbers of papers published in discrete time, an inverse Gaussian probability distribution function to express the aging effect based on the difference between publication times, and an exponential distribution (or a generalized Pareto distribution) for describing the out-degree distribution. We consider that our model is a more reasonable and appropriate stochastic model than other existing models and can perform complete simulations without using original data. In this paper, we first use the Web of Science database and see the features used in our model. By using the proposed model, we can generate simulated graphs and demonstrate that they are similar to the original data concerning the in- and out-degree distributions, and node triangle participation. In addition, we analyze two other citation networks derived from physics papers in the arXiv database and verify the effectiveness of the model., Competing Interests: The authors have declared that no competing interests exist.

As social issues like climate change become increasingly salient, digital traces left by scholarly documents can be used to assess their reach outside of academia. Our research examine who shared climate change research papers on Twitter by looking at the expressions used in profile descriptions. We categorized users in eight categories (academia, communication, political, professional, personal, organization, bots and publishers) associated to specific expressions. Results indicate how diverse publics may be represented in the communication of scholarly documents on Twitter. Supplementing our word detection analysis with qualitative assessments of the results, we highlight how the presence of unique or multiple categorizations in textual Twitter descriptions provides evidence of the publics of research in specific contexts. Our results show a more substantial communication by academics and organizations for papers published in 2016, whereas the general public comparatively participated more in 2015. Overall, there is significant participation of publics outside of academia in the communication of climate change research articles on Twitter, although the extent to which these publics participate varies between individual papers. This means that papers circulate in specific communities which need to be assessed to understand the reach of research on social media. Furthermore, the flexibility of our method provide means for research assessment that consider the contextuality and plurality of publics involved on Twitter., Competing Interests: The authors have declared that no competing interests exist.

Following the fast spread of Covid-19 across Europe and North America in March 2020, many people started stockpiling commodities like toilet paper. Despite the high relevance for public authorities to adequately address stockpiling behavior, empirical studies on the psychological underpinnings of toilet paper stockpiling are still scarce. In this study, we investigated the relation between personality traits, perceived threat of Covid-19, and stockpiling of toilet paper in an online survey (N = 996) across 22 countries. Results suggest that people who felt more threatened by Covid-19 stockpiled more toilet paper. Further, a predisposition towards Emotionality predicted the perceived threat of Covid-19 and affected stockpiling behavior indirectly. Finally, Conscientiousness was related to toilet paper stockpiling, such that individuals higher in Conscientiousness tended to stockpile more toilet paper. These results emphasize the importance of clear communication by public authorities acknowledging anxiety and, at the same time, transmitting a sense of control., Competing Interests: The authors have declared that no competing interests exist.

The cost of specialized scientific equipment can be high and with limited funding resources, researchers and students are often unable to access or purchase the ideal equipment for their projects. In the fields of materials science and mechanical engineering, fundamental equipment such as tensile testing devices can cost tens to hundreds of thousands of dollars. While a research lab often has access to a large-scale testing machine suitable for conventional samples, loading devices for meso- and micro-scale samples for in-situ testing with the myriad of microscopy tools are often hard to source and cost prohibitive. Open-source software has allowed for great strides in the reduction of costs associated with software development and open-source hardware and additive manufacturing have the potential to similarly reduce the costs of scientific equipment and increase the accessibility of scientific research. To investigate the feasibility of open-source hardware, a micro-tensile tester was designed with a freely accessible computer-aided design package and manufactured with a desktop 3D-printer and off-the-shelf components. To our knowledge this is one of the first demonstrations of a tensile tester with additively manufactured components for scientific research. The capabilities of the tensile tester were demonstrated by investigating the mechanical properties of Graphene Oxide (GO) paper and thin films. A 3D printed tensile tester was successfully used in conjunction with an atomic force microscope to provide one of the first quantitative measurements of GO thin film buckling under compression. The tensile tester was also used in conjunction with an atomic force microscope to observe the change in surface topology of a GO paper in response to increasing tensile strain. No significant change in surface topology was observed in contrast to prior hypotheses from the literature. Based on this result obtained with the new open source tensile stage we propose an alternative hypothesis we term 'superlamellae consolidation' to explain the initial deformation of GO paper. The additively manufactured tensile tester tested represents cost savings of >99% compared to commercial solutions in its class and offers simple customization. However, continued development is needed for the tensile tester presented here to approach the technical specifications achievable with commercial solutions., Competing Interests: We declare that the work was partially funded by Goodyear Rubber and Tire Company. Goodyear (or other funding sources) were not involved in the study design; collection, analysis, and interpretation of data; writing of the paper; and/or decision to submit for publication. This does not alter our adherence to PLOS ONE policies on sharing data and materials.

Before organizing mixed-mode data collection for the self-administered questionnaire of the Belgian Health Interview Survey, measurement effects between the paper-and-pencil and the web-based questionnaire were evaluated. A two-period cross-over study was organized with a sample of 149 employees of two Belgian research institutes (age range 22-62 years, 72% female). Measurement agreement was assessed for a diverse range of health indicators related to general health, mental and psychosocial health, health behaviors and prevention with kappa coefficients and intraclass correlation (ICC). The quality of the data collected by both modes was evaluated by quantifying the missing, 'don't know' and inconsistent values and data entry mistakes. Good to very good agreement was found for all categorical indicators with kappa coefficients superior to 0.60, except for two mental and psychosocial health indicators namely the presence of a sleeping disorder and of a depressive disorder (kappa≥0.50). For the continuous indicators high to acceptable agreement was observed with ICC superior to 0.70. Inconsistent answers and data-entry mistakes were only occurring in the paper-and-pencil mode. There were no less missing values in the web-based mode compared to the paper-and-pencil mode. The study supports the idea that web-based modes provide, in general, equal responses to paper-and-pencil modes. However, health indicators based upon factual and objective items tend to have higher measurement agreement than indicators requiring an assessment of personal subjective feelings. A web-based mode greatly facilitates the data-entry process and guides the completing of a questionnaire. However, item non-response was not positively affected., Competing Interests: The authors have declared that no competing interests exist.

Pyocyanin is a toxin produced by Pseudomonas aeruginosa. Here we describe a novel paper-based electrochemical sensor for pyocyanin detection, manufactured with a simple and inexpensive approach based on electrode printing on paper. The resulting sensors constitute an effective electrochemical method to quantify pyocyanin in bacterial cultures without the conventional time consuming pretreatment of the samples. The electrochemical properties of the paper-based sensors were evaluated by ferri/ferrocyanide as a redox mediator, and showed reliable sensing performance. The paper-based sensors readily allow for the determination of pyocyanin in bacterial cultures with high reproducibility, achieving a limit of detection of 95 nM and a sensitivity of 4.30 μA/μM in standard culture media. Compared to the similar commercial ceramic based sensors, it is a 2.3-fold enhanced performance. The simple in-house fabrication of sensors for pyocyanin quantification allows researchers to understand in vitro adaptation of P. aeruginosa infections via rapid screenings of bacterial cultures that otherwise are expensive and time-consuming.

Bisphenol A (BPA) is an endocrine disrupting chemical used in a wide range of consumer products including photoactive dyes used in thermal paper. Recent studies have shown that dermal absorption of BPA can occur when handling these papers. Yet, regulatory agencies have largely dismissed thermal paper as a major source of BPA exposure. Exposure estimates provided by agencies such as the European Food Safety Authority (EFSA) are based on assumptions about how humans interact with this material, stating that 'typical' exposures for adults involve only one handling per day for short periods of time (<1 minute), with limited exposure surfaces (three fingertips). The objective of this study was to determine how individuals handle thermal paper in one common setting: a cafeteria providing short-order meals. We observed thermal paper handling in a college-aged population (n = 698 subjects) at the University of Massachusetts' dining facility. We find that in this setting, individuals handle receipts for an average of 11.5 min, that >30% of individuals hold thermal paper with more than three fingertips, and >60% allow the paper to touch their palm. Only 11% of the participants we observed were consistent with the EFSA model for time of contact and dermal surface area. Mathematical modeling based on handling times we measured and previously published transfer coefficients, concentrations of BPA in paper, and absorption factors indicate the most conservative estimated intake from handling thermal paper in this population is 51.1 ng/kg/day, similar to EFSA's estimates of 59 ng/kg/day from dermal exposures. Less conservative estimates, using published data on concentrations in thermal paper and transfer rates to skin, indicate that exposures are likely significantly higher. Based on our observational data, we propose that the current models for estimating dermal BPA exposures are not consistent with normal human behavior and should be reevaluated.

Recycled paper has the potential to be used as a mulch for vegetable production and can be adopted for the cultivation of Italian zucchini. However, there have been no studies about the water savings or crop coefficient values used in irrigation management in this system; therefore, there is a need for more research. In view of the above, this study aimed to evaluate the effects of recycled paper mulch on evaporation and evapotranspiration in Italian zucchini and to determine the crop coefficients in its developmental stages. The study was carried out in two cultivation cycles conducted at the Lysimetric Station in Viçosa, MG, Brazil. The experiments were installed in a randomized block design with four replicates. Four lysimeter cultivation treatments were applied: without mulch (C); with recycled paper as mulch (CP); with only recycled paper (P); and with Bahia grass (G). Irrigation and drainage measurements were performed daily to calculate the crop and reference evapotranspiration, and thus the crop coefficient (Kc) values. The following characteristics were evaluated: fruit yield, NDVI and water productivity. For the cultivation of Italian zucchini using paper as mulch, Kc values of 0.54, 0.77 and 0.44 and Kcb values of 0.15, 0.45 and 0.18 are recommended for the initial, intermediate and final stages, respectively. NDVI can be used to estimate the Kc values for Italian zucchini. The use of recycled paper as mulch reduces the water consumption of Italian zucchini., Competing Interests: The authors have declared that no competing interests exist.

Introduction: More people are living with and beyond a cancer diagnosis. There is limited understanding of the long-term effects of cancer and cancer treatment on quality of life and personal and household finances when compared to people without cancer. In a separate protocol we have proposed to link de-identified data from electronic primary care and hospital records for a large population of cancer survivors and matched controls. In this current protocol, we propose the linkage of Patient Reported Outcomes Measures data to the above data for a subset of this population. The aim of this study is to investigate the full impact of living with and beyond a cancer diagnosis compared to age and gender matched controls. A secondary aim is to test the feasibility of the collection of Patient Reported Outcomes Measures (PROMS) data and the linkage procedures of the PROMs data to electronic health records data., Materials and Methods: This is a cross-sectional study, aiming to recruit participants treated at the Leeds Teaching Hospitals National Health Service Trust. Eligible patients will be cancer survivors at around 5 years post-diagnosis (breast, colorectal and ovarian cancer) and non-cancer patient matched controls attending dermatology out-patient clinics. They will be identified by running a query on the Leeds Teaching Hospitals Trust patient records system. Approximately 6000 patients (2000 cases and 4000 controls) will be invited to participate via post. Participants will be invited to complete PROMs assessing factors such as quality of life and finances, which can be completed on paper or online (surveys includes established instruments, and bespoke instruments (demographics, financial costs). This PROMs data will then be linked to routinely collected de-identified data from patient's electronic primary care and hospital records., Discussion: This innovative work aims to create a truly 'comprehensive patient record' to provide a broad picture of what happens to cancer patients across their cancer pathway, and the long-term impact of cancer treatment. Comparisons can be made between the cases and controls, to identify the aspects of life that has had the greatest impact following a cancer diagnosis. The feasibility of linking PROMs data to electronic health records can also be assessed. This work can inform future support offered to people living with and beyond a cancer diagnosis, clinical practice, and future research methodologies., Competing Interests: The authors have declared that no competing interests exist.

Although regression models play a central role in the analysis of medical research projects, there still exist many misconceptions on various aspects of modeling leading to faulty analyses. Indeed, the rapidly developing statistical methodology and its recent advances in regression modeling do not seem to be adequately reflected in many medical publications. This problem of knowledge transfer from statistical research to application was identified by some medical journals, which have published series of statistical tutorials and (shorter) papers mainly addressing medical researchers. The aim of this review was to assess the current level of knowledge with regard to regression modeling contained in such statistical papers. We searched for target series by a request to international statistical experts. We identified 23 series including 57 topic-relevant articles. Within each article, two independent raters analyzed the content by investigating 44 predefined aspects on regression modeling. We assessed to what extent the aspects were explained and if examples, software advices, and recommendations for or against specific methods were given. Most series (21/23) included at least one article on multivariable regression. Logistic regression was the most frequently described regression type (19/23), followed by linear regression (18/23), Cox regression and survival models (12/23) and Poisson regression (3/23). Most general aspects on regression modeling, e.g. model assumptions, reporting and interpretation of regression results, were covered. We did not find many misconceptions or misleading recommendations, but we identified relevant gaps, in particular with respect to addressing nonlinear effects of continuous predictors, model specification and variable selection. Specific recommendations on software were rarely given. Statistical guidance should be developed for nonlinear effects, model specification and variable selection to better support medical researchers who perform or interpret regression analyses., Competing Interests: The authors have declared that no competing interests exist.

In our planned study, we shall empirically study the assessment of cited papers within the framework of the anchoring-and-adjustment heuristic. We are interested in the question whether citation decisions are (mainly) driven by the quality of cited references. The design of our study is oriented towards the study by Teplitskiy, Duede [10]. We shall undertake a survey of corresponding authors with an available email address in the Web of Science database. The authors are asked to assess the quality of papers that they cited in previous papers. Some authors will be assigned to three treatment groups that receive further information alongside the cited paper: citation information, information on the publishing journal (journal impact factor), or a numerical access code to enter the survey. The control group will not receive any further numerical information. In the statistical analyses, we estimate how (strongly) the quality assessments of the cited papers are adjusted by the respondents to the anchor value (citation, journal, or access code). Thus, we are interested in whether possible adjustments in the assessments can not only be produced by quality-related information (citation or journal), but also by numbers that are not related to quality, i.e. the access code. The results of the study may have important implications for quality assessments of papers by researchers and the role of numbers, citations, and journal metrics in assessment processes., Competing Interests: The authors have declared that no competing interests exist.

The objective of this work was to investigate the influence of hydrogen bonds between fibres on static and dynamic strength properties of paper. A commercial bleached pinewood kraft pulp was soaked in water, refined in a PFI, and used to form paper webs in different solvents, such as water, methanol, ethanol, n-propanol and n-butanol, to determine the effect of their dipole moment on static and dynamic strength properties of resulting paper sheets. Paper which was formed in water, being the solvent of the highest dipole moment among the tested ones, showed the highest breaking length and tear resistance. When paper webs were formed in n-butanol, which was the least polar among the solvents, these parameters were reduced by around 75%. These results provide evidence of the importance of water in paper web formation and strong impact of hydrogen bonds between fibres on strength properties of paper.

In this paper, we present a facile and cost-effective method to obtain superhydrophobic filter paper and demonstrate its application for efficient water/oil separation. By coupling structurally distinct organosilane precursors (e.g., octadecyltrichlorosilane and methyltrichlorosilane) to paper fibers under controlled reaction conditions, we have formulated a simple, inexpensive, and efficient protocol to achieve a desirable superhydrophobic and superoleophilic surface on conventional filter paper. The silanized superhydrophobic filter paper showed nanostructured morphology and demonstrated great separation efficiency (up to 99.4%) for water/oil mixtures. The modified filter paper is stable in both aqueous solutions and organic solvents, and can be reused multiple times. The present study shows that our newly developed binary silanization is a promising method of modifying cellulose-based materials for practical applications, in particular the treatment of industrial waste water and ecosystem recovery.

Background: The high childhood mortality and life-long complications associated with sickle cell anemia (SCA) in developing countries could be significantly reduced with effective prophylaxis and education if SCA is diagnosed early in life. However, conventional laboratory methods used for diagnosing SCA remain prohibitively expensive and impractical in this setting. This study describes the clinical validation of a low-cost paper-based test for SCA that can accurately identify sickle trait carriers (HbAS) and individuals with SCA (HbSS) among adults and children over 1 year of age., Methods and Findings: In a population of healthy volunteers and SCA patients in the United States (n = 55) the test identified individuals whose blood contained any HbS (HbAS and HbSS) with 100% sensitivity and 100% specificity for both visual evaluation and automated analysis, and detected SCA (HbSS) with 93% sensitivity and 94% specificity for visual evaluation and 100% sensitivity and 97% specificity for automated analysis. In a population of post-partum women (with a previously unknown SCA status) at a primary obstetric hospital in Cabinda, Angola (n = 226) the test identified sickle cell trait carriers with 94% sensitivity and 97% specificity using visual evaluation (none of the women had SCA). Notably, our test permits instrument- and electricity-free visual diagnostics, requires minimal training to be performed, can be completed within 30 minutes, and costs about $0.07 in test-specific consumable materials., Conclusions: Our results validate the paper-based SCA test as a useful low-cost tool for screening adults and children for sickle trait and disease and demonstrate its practicality in resource-limited clinical settings.

This paper describes self-reinforced antibacterial and oil-resistant properties that were successfully prepared by surface selective dissolution of filter paper in a NaOH/Urea/ZnO (weight ratio of 8:12:0.25) aqueous solution. The effect of the processing time on the mechanical properties of this paper was evaluated at -12°C. The paper morphologies were characterized using Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The oil-resistance and antibacterial properties of the produced paper were also investigated. Excellent mechanical properties were observed for an optimized handling time. The tensile and burst strengths of the modified paper were in excess of 100% of the original. Meanwhile, the treated paper was completely oil-resistant within 24 h and demonstrated good antibacterial properties when exposed to Staphylococcus aureus. The traces of residual zinc oxide were found to be safe for food.

The breakthrough potentials of research papers can be explained by their boundary-spanning qualities. Here, for the first time, we apply the structural variation analysis (SVA) model and its affiliated metrics to investigate the extent to which such qualities characterize a group of Nobel Prize winning papers. We find that these papers share remarkable boundary-spanning traits, marked by exceptional abilities to connect disparate and topically-diverse clusters of research papers. Further, their publications exert structural variations on a scale that significantly alters the betweenness centrality distributions in existing intellectual space. Overall, SVA not only provides a set of leading indicators for describing future Nobel Prize winning papers, but also broadens our understanding of similar prize-winning properties that may have been overlooked among other regular publications., Competing Interests: The authors have declared that no competing interests exist.

Objective: To survey the knowledge, attitude, and practices of Vietnamese pharmacists regarding the COVID-19 pandemic., Method: This cross-sectional, paper-based study was conducted from June to August 2020. A validated questionnaire (Cronbach's alpha = 0.84) was used to interview 1,023 pharmacists in nine provinces of Vietnam. Analysis of covariance was employed to identify factors associated with the knowledge of pharmacists. The best model was chosen by using the Bayesian Model Averaging method in R software version 4.0.4., Results: The mean knowledge score was 12.02 ± 1.64 (range: 6-15), which indicated that 93.4% of pharmacists had good knowledge of COVID-19. There was no difference in the average score between males and females (p > 0.05). The multivariate linear regression model revealed that the knowledge was significantly associated with pharmacists' age, education level, and residence (p < 0.001). About attitude and practices, pharmacists daily sought and updated information on the COVID-19 pandemic through mass media and the internet (social network and online newspapers). Nearly 48% of them conceded that they communicated with customers when at least one person did not wear a face mask at the time of the COVID-19 outbreak. At medicine outlets, many measures were applied to protect pharmacists and customers, such as equipping pharmacists with face masks and hand sanitizers (95.0%), using glass shields (83.0%), and maintaining at least one-meter distance between two people (85.2%)., Conclusion: The pharmacists' knowledge of COVID-19 transmission, symptoms, and prevention was good. Many useful measures against the spread of this perilous virus were applied in medicine outlets. However, pharmacists should restrict forgetting to wear face masks in communication with medicine purchasers. The government and health agencies should have practical remedies to reduce the significant differences in the COVID-19 knowledge of pharmacists among provinces and education-level groups., Competing Interests: The authors have declared that no competing interests exist.

The Panama Papers comprise one of the most recent influential leaks containing detailed information on intermediary companies (such as law firms), offshore entities and company officers, and serve as a valuable source of insight into the operations of (approximately) 214,000 shell companies incorporated in tax havens around the globe over the past half century. Entities and relations in the papers can be used to construct a network that permits, in principle, a systematic and scientific study at scale using techniques developed in the computational social science and network science communities. In this paper, we propose such a study by attempting to quantify and profile the importance of entities. In particular, our research explores whether intermediaries are significantly more influential than offshore entities, and whether different centrality measures lead to varying, or even incompatible, conclusions. Some findings yield conclusions that resemble Simpson's paradox. We also explore the role that jurisdictions play in determining entity importance., Competing Interests: The authors have declared that no competing interests exist.

Rocky desertification is a bottleneck that reduces ecological and environmental security in karst areas. Paper mulberry, a unique deciduous tree, shows good performance in rocky desertification areas. Its resistance mechanisms are therefore of high interest. In this study, a lysine acetylation proteomics analysis of paper mulberry seedling leaves was conducted in combination with the purification of acetylated protein by high-precision nano LC-MS/MS. We identified a total of 7130 acetylation sites in 3179 proteins. Analysis of the modified sites showed a predominance of nine motifs. Six positively charged residues: lysine (K), arginine (R), and histidine (H), serine (S), threonine (T), and tyrosine (Y) occurred most frequently at the +1 position, phenylalanine (F) was both detected both upstream and downstream of the acetylated lysines; and the sequence logos showed a strong preference for lysine and arginine around acetylated lysines. Functional annotation revealed that the identified enzymes were mainly involved in translation, transcription, ribosomal structure and biological processes, showing that lysine acetylation can regulate various aspects of primary carbon and nitrogen metabolism and secondary metabolism. Acetylated proteins were enriched in the chloroplast, cytoplasm, and nucleus, and many stress response-related proteins were also discovered to be acetylated, including PAL, HSP70, and ERF. HSP70, an important protein involved in plant abiotic and disease stress responses, was identified in paper mulberry, although it is rarely found in woody plants. This may be further examined in research in other plants and could explain the good adaptation of paper mulberry to the karst environment. However, these hypotheses require further verification. Our data can provide a new starting point for the further analysis of the acetylation function in paper mulberry and other plants., Competing Interests: The authors have declared that no competing interests exist.

On-site surveys involving face-to-face interviews are implemented globally across many scientific disciplines. Incorporating new technologies into such surveys by using electronic devices is becoming more common and is widely viewed to be more cost-effective and accurate. However, Electronic Data Capture methods (EDC) when compared to traditional Paper-based Data Capture (PDC) are often implemented without proper evaluation of any changes in efficiency, especially from surveys in coastal and marine environments. A roving creel survey of recreational shore-based fishers in Western Australia in 2019 enabled a direct comparison between the two methods. Randomisation strategies were employed to ensure biases in using each technique were minimised. A total of 1,068 interviews with recreational fishers were undertaken with a total error rate of 5.1% (CI95%: 4.8-5.3%) for PDC and 3.1% (CI95%: 2.9-3.3%) for EDC. These results confirmed that EDC can reduce errors whilst increasing efficiency and decreasing cost, although some aspects of this platform could be improved with some streamlining. This study demonstrates how EDC can be successfully implemented in coastal and marine environments without compromising the randomised, stratified nature of a survey and highlights the cost-effectiveness of this method. Such findings can be widely applied to any discipline which uses face-to-face interviews for data collection., Competing Interests: The authors have declared that no competing interests exist.

Raman spectroscopy has proven to be an indispensable technique for the identification of various types of analytes due to the fingerprint vibration spectrum obtained. Paper microfluidics has also emerged as a low cost, easy to fabricate and portable approach for point of care testing. However, due to inherent background fluorescence, combining Raman spectroscopy with paper microfluidics is to date an unmet challenge in the absence of using surface enhanced mechanisms. We describe the first use of wavelength modulated Raman spectroscopy (WMRS) for analysis on a paper microfluidics platform. This study demonstrates the ability to suppress the background fluorescence of the paper using WMRS and the subsequent implementation of this technique for pharmaceutical analysis. The results of this study demonstrate that it is possible to discriminate between both paracetamol and ibuprofen, whilst, also being able to detect the presence of each analyte quantitatively at nanomolar concentrations.

Introduction: Data collection using paper-based questionnaires can be time consuming and return errors affect data accuracy, completeness, and information quality in health surveys. We compared smartphone and paper-based data collection systems in the Burden of Obstructive Lung Disease (BOLD) study in rural Sudan., Methods: This exploratory pilot study was designed to run in parallel with the cross-sectional household survey. The Open Data Kit was used to programme questionnaires in Arabic into smartphones. We included 100 study participants (83% women; median age = 41.5 ± 16.4 years) from the BOLD study from 3 rural villages in East-Gezira and Kamleen localities of Gezira state, Sudan. Questionnaire data were collected using smartphone and paper-based technologies simultaneously. We used Kappa statistics and inter-rater class coefficient to test agreement between the two methods., Results: Symptoms reported included cough (24%), phlegm (15%), wheezing (17%), and shortness of breath (18%). One in five were or had been cigarette smokers. The two data collection methods varied between perfect to slight agreement across the 204 variables evaluated (Kappa varied between 1.00 and 0.02 and inter-rater coefficient between 1.00 and -0.12). Errors were most commonly seen with paper questionnaires (83% of errors seen) vs smartphones (17% of errors seen) administered questionnaires with questions with complex skip-patterns being a major source of errors in paper questionnaires. Automated checks and validations in smartphone-administered questionnaires avoided skip-pattern related errors. Incomplete and inconsistent records were more likely seen on paper questionnaires., Conclusion: Compared to paper-based data collection, smartphone technology worked well for data collection in the study, which was conducted in a challenging rural environment in Sudan. This approach provided timely, quality data with fewer errors and inconsistencies compared to paper-based data collection. We recommend this method for future BOLD studies and other population-based studies in similar settings.

Background: Identification of the source of mosquito blood meals is an important component for disease control and surveillance. Recently, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) profiling has emerged as an effective tool for mosquito blood meal identification, using the abdomens of freshly engorged mosquitoes. In the field, mosquito abdomens are crushed on Whatman filter papers to determine the host feeding patterns by identifying the origin of their blood meals. The aim of this study was to test whether crushing engorged mosquito abdomens on Whatman filter papers was compatible with MALDI-TOF MS for mosquito blood meal identification. Both laboratory reared and field collected mosquitoes were tested., Material and Methods: Sixty Anopheles gambiae Giles were experimentally engorged on the blood of six distinct vertebrate hosts (human, sheep, rabbit, dog, chicken and rat). The engorged mosquito abdomens were crushed on Whatman filter papers for MALDI-TOF MS analysis. 150 Whatman filter papers, with mosquitoes engorged on cow and goat blood, were preserved. A total of 77 engorged mosquito abdomens collected in the Comoros Islands and crushed on Whatman filter papers were tested with MALDI-TOF MS., Results: The MS profiles generated from mosquito engorged abdomens crushed on Whatman filter papers exhibited high reproducibility according to the original host blood. The blood meal host was correctly identified from mosquito abdomens crushed on Whatman filter papers by MALDI-TOF MS. The MS spectra obtained after storage were stable regardless of the room temperature and whether or not they were frozen. The MS profiles were reproducible for up to three months. For the Comoros samples, 70/77 quality MS spectra were obtained and matched with human blood spectra. This was confirmed by molecular tools., Conclusion: The results demonstrated that MALDI-TOF MS could identify mosquito blood meals from Whatman filter papers collected in the field during entomological surveys. The application of MALDI-TOF MS has proved to be rapid and successful, making it a new and efficient tool for mosquito-borne disease surveillance.

Competing Interests: AM and SA are authors of the work disputed by Gandjour. Previous work related to the letter of Gandjour was financed by Gilead. Further study grants in the last five years were received from Abbvie, Janssen Cilag and Johnson & Johnson.