Search

Hypothesis: Analytical expressions for calculating Hamaker constant (HC) and van der Waals (VDW) energy/force for interaction of a particle with a solid water interface has been reported for over eighty years. This work further developed novel analytical expressions and numerical approaches for determining HC and VDW interaction energy/force for the particle approaching and penetrating air-water interface (AWI), respectively., Methods: The expressions of HC and VDW interaction energy/force before penetrating were developed through analysis of the variation in free energy of the interaction system with bringing the particle from infinity to the vicinity of the AWI. The surface element integration (SEI) technique was modified to calculate VDW energy/force after penetrating., Findings: We explain why repulsive VDW energy exists inhibiting the particle from approaching the AWI. We found very significant VDW repulsion for a particle at a concave AWI after penetration, which can even exceed the capillary force and cause strong retention in water films on a solid surface and at air-water-solid interface line. The methods and findings of this work are critical to quantification and understanding of a variety of engineered processes such as particle manipulation (e.g., bubble flotation, Pickering emulsion, and particle laden interfaces)., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Hypothesis: Wettability effect has long been a concern in various aqueous lubrication systems including biological and industrial applications. The wettability may affect lubrication performance by changing interfacial viscosity or hydration force. The key point to reveal the mechanism is to design an ideal experimental system to exclude other bulk factors other than surface wettability., Experiments: In this work, silicon surfaces with different treatments were used to study the single factor effect of wettability on aqueous lubrication. The normal and friction forces of these surfaces were quantified by atomic force microscopy (AFM) in water environment. The interfacial viscosity was evaluated according to the probe dynamic approaching process. Macroscale and microscale lubrication experiments of other materials were also conducted as verification and supplement., Findings: A semi-quantitative relationship between friction and wettability was revealed and attributed to the competition between the attractive van der Waals interactions and wettability-dependent repulsive hydration interaction, which determined the strength of the adhesive interaction and dominated the sliding energy dissipation. The contribution of viscous effect of water was considered to be relatively minor. The findings provide an in-depth understanding of aqueous lubrication and outline important guidelines for tuning adhesion and friction., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Hypothesis: Highly hydrophilic nanoparticles are generally considered not suitable for stabilizing Pickering emulsions, since they could not be effectively wetted by the oil phase at the water-oil interface. However, highly hydrophilic nanoparticles with good dispersity are possibly absorbed and packed onto the surface of the oil droplets in water via the van der Waals attraction between the nanoparticles and the oil droplets. Hence, a novel "van der Waals emulsion" should be possible to be stabilized by highly hydrophilic nanoparticles., Experiments: Oil-in-water emulsions solely stabilized by pristine TiO 2 nanoparticles (i.e., TiO 2 without any modification or additives) were prepared. The emulsification behavior under varying pH value, oil fraction, particle content and temperature of the emulsion were explored. Composite wax-based beads which encapsulated chemical sunscreen and was coated by TiO 2 nanoparticles, was also fabricated using the obtained emulsion as the templates., Findings: The emulsions displayed the highest stability near the isoelectric points of the TiO 2 nanoparticles, which was attributed to the van der Waals attraction between TiO 2 nanoparticles and oil droplets. Such mechanism was supported by a theoretical analysis based on calculation of the Hamaker constants and experimental evidences. Therefore, this work presents a simple, general and green method for preparing particle-stabilized emulsions., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Thin polymeric coatings are commonly used for altering surface properties and modulating the interfacial performance of materials. Possible contributions from the substrate to the interfacial forces and effects are, however, usually ignored and are not well understood, nor is it established how the coating thickness modulates and eventually eliminates contributions from substrates to the van der Waals (vdW) interfacial force. In this study we quantified, by colloid-probe atomic force microscope (AFM) and by theoretical calculations, the interfacial vdW contributions from substrates acting through ethanol plasma polymer (EtOHpp) coatings of a range of thicknesses on Au and Si bulk materials. In approach force curves against EtOHpp-coated Au substrates the magnitude of the vdW force decreased as the EtOHpp coating thickness increased to 18 nm and then plateaued with further increases in coating thickness, providing direct evidence for a contribution to the total interfacial vdW force from the Au substrate acting through thin coatings. The experimental observations accord with theoretical calculations of the thickness dependence of Hamaker coefficients derived from rigorous simulation using the Lifshitz theory. In addition, the measured forces agree well with theoretical predictions including correction for finite roughness. Thus, our experimental and theoretical results establish how the thickness of polymer thin film coatings modulates the total interfacial vdW force and how this can be used to tune the net vdW force so as to either contain a large substrate contribution or arise predominantly from the polymeric overlayer. Our findings enable rational design of coating thickness to tailor interfacial interactions and material performance., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Inc. All rights reserved.)

Hypothesis: Surface effects arising from roughness and deformation can negatively affect the results of AFM contact experiments. Using the non-contact portion of an AFM deflection curve is therefore desirable for estimating the Hamaker constant, A, of a solid material. A previously validated non-contact quasi-dynamic method for estimating A is revisited, in which the cantilever tip is now always represented by an "effective sphere". In addition to simplifying this previous method, accurate estimates of A can still be obtained even though precise knowledge of the nanoscale geometric features of the cantilever tip are no longer required., Experiments: The tip's "effective" radius of curvature, R eff , is determined from a "calibration" step, in which the tip's deflection at first contact with the surface is measured for a substrate with a known Hamaker constant. After R eff is known for a given tip, estimates of A for other surfaces of interest are then determined., Findings: An experimental study was conducted to validate the new method and the obtained results are in good agreement with predictions from the Lifshitz approximation, when available. Since R eff accounts for all geometric uncertainties of the tip through a single fitted parameter, no visual fitting of the tip shape was required., (Copyright © 2018 Elsevier Inc. All rights reserved.)

Detachment of a surface from a viscoelastic layer, such as a film of glue, engenders bridges between the surfaces until separation. Such surface instabilities arising during contact and detachment of viscoelastic films with rigid contactors have been theoretically explored by linear stability analysis and nonlinear simulations. The contact instabilities of viscoelastic materials are found to manifest in either a 'critical' or a 'dominant' mode in which the former is preferred when the contactor is slowly brought near the film while the latter manifests when the film is 'hard-pressed' against it. The nonlinear analysis considers the movement of contactor during adhesion-debonding cycle, which uncovers that the kinetic parameters can overshadow the thermodynamically predicted area of contact, average force for pull-off, energy of contactor-film separation, and pathways of debonding. Three distinct pathways of debonding - peeling, catastrophic column collapse, and column coalescence, are found to manifest with the variation in the ratio of the elastic to viscous compliances of the viscoelastic film. The study also reveals that in the dominant mode of instability, a smaller length scale with a larger area contact between the contactor and film can develop patterns having aspect ratio ∼10 times larger than the same obtained from elastic film., (Copyright © 2016 Elsevier Inc. All rights reserved.)

Considering recent applications of electrophoresis conduced in nanoscaled devices, where particle-particle interaction can play a role, we studied for the first time the electrophoresis of two rigid spheres along their center line, taking account of the hydrodynamic, electric, and van der Waals interactions between them. Under the conditions of constant surface potential and surface charge density, the influences of the level of surface potential/charge density, the bulk salt concentration, and the particle-particle distance on their electrokinetic behaviors are examined. Numerical simulation reveals that these behaviors are much more complicated and interesting than those of isolated particles. In particular, we show that care must be taken in choosing an appropriate particle concentration in relevant experiment to avoid obtaining unreliable mobility data., (Copyright © 2015 Elsevier Inc. All rights reserved.)